2356 Water Resistant BusBar - 100 Amp with CoverProvides secure water-resistant bussing for harsh environments. The single side nesting design allows for wire entry from one side to maximize space.Features: Water-resistant design with standard ring or fork type terminals allows for simple wiring with standard tools. Accepts a wide range of wire sizes Includes 3 wire plugs to maintain water-resistant rating if less than 4 wires are used Nests with other Water-Resistant 100A Common BusBars and ST-Blade Water-Resistant Fuse Block for space saving wiring Ideal for positive distribution and for the collection of negative or AC ground circuits Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper busses and fuse clips Includes four write-on circuit labels Small format standard and custom labels available Specifications: Cover: Yes Maximum Voltage: 300V AC/48V DC Continuous Rating: 100A AC/100A DC Bus Material: Tin-Plated Copper C11000 Mounting Holes: Accepts 1/4" (6mm) Screws Terminal Screw: 4 x #8-32 Terminal Stud: 1 x #10-32 Wire Size: (1) 8 AWG to 4 AWG - Input/(4) 16 AWG to 10 AWG - Load WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MiniBus 100 Ampere Common BusBar 5 x 8-32 Screw Terminal with CoverPN:   2314 Great for limited space applications in electronics cabinets and under dashboards Snap on insulating cover attaches to studs and allows unobstructed wire access Raised bus provides easy access to multiple wires on a single screw Pressed on busbar eliminates the need for securing nut Stainless steel studs allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and corrosion resistance= Recessed mounting holes eliminate accidental shorts to aluminum and steel mounting surfaces Captive star type lock washers meet CE requirements for anti-rotation and eliminate handling of small, easily dropped parts Stainless steel Phillips screws for easier installation and resistance to stripping UL 94-VO rated base material resists high heat Continuous Amperage 130 Amperes AC/DC Maximum Voltage Rating 300 Volts AC/48 Volts DC Bus Material Tin-Plated Copper CDA 110/UNS11000 Base Material Reinforced Polycarbonate Cover Material Clear Polycarbonate Weight 0.17Lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Insulated Distribution Stud, Dual 1/4" - (Black)Dual Stud Made with high temperature plastic bases Stud covers push securely over the threaded stud covering to ABYC standards Dual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter installations Covers supplied with display versions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4012 CableCap - Red 0.50 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

ST CLB Circuit Breaker Block Jumper - Package of 5Specifications:5 per retail packageWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Dual PowerPost Connectors Designed for outboard engine installation when factory cables need to be extended Includes one black and one red insulator WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PowerPost High Amperage Cable Connector #10 StudFeatures:  Insulated single stainless steel stud terminates multiple large conductors Connects high amperage cables securely Stud dimensions: #10-32 x 5/8" Base Material is PBT UL94 V0 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4010 CableCap - Red 0.70 to 0.30 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2510 Terminal Block 30AMP - 10 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2506 Terminal Block 30AMP - 6 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2504 Terminal Block 30AMP - 4 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9216 Terminal Block Jumper for 2600 Series Blocks - Package of 5Features: Jumpers allow creation of common circuits on independent connectors Fits 65AMP terminal blocks (2600 Series) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Maxibus CoverPart# 2718Cover for 2105 & 2106WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2715 Cover for BusBar 2301 & 2303Features:Weight: 0.08lb (0.04 kg)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2306 MiniBus 100AMP Common BusBar Grounding BusBar 6 x 8-32 Screw TerminalFeatures:Great for limited space applications in electronics cabinets and under dashboardsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2302 150AMP Common BusBar 20 x 8-32 Screw TerminalFeatures: The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Max Voltage: 300 V AC 48 V DC Number of Screws: 20 Number of Terminal Studs: 2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2151Features: New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse-Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraints Weatherproof-suitable for small open-cockpit boats and other harsh environments Insulating cap prevents accidental shorts Use 5/16" or 3/8" ring terminal WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2508 Terminal Block 30AMP - 8 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Dual Buss Bar with Cover - 12 TerminalsThis dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on one block. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.Features: Includes two 1/4"-20 stainless steel stud terminals and six #8-32 stainless steel screw terminals per buss Installs with four #8 FH fasteners (included) 48VDC, 150A per buss; 300VAC, 150A per buss CE and RoHS compliant Specifications: Terminals: 12 Length (inch): 5-1/2" Width (inch): 2-3/4" Depth (inch): 1-11/16" Max. Amps: 150 Fastener: #8 FH Weight: 0.59 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4017 Straight Terminal CableCap - LargeInsulates battery terminals which have standard automotive posts.Features:Designed to fit standard automotive postsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

16-14 AWG Heat Shrink Ring Terminal - #10 Stud Size - 100 PackRing terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Blue Wire AWG: 16-14 AWG Stud Size: #10 Terminal Pad Width (inch): 0.32” Package Size: One-hundred included Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 100 Post Size: #10 Type: Ring Terminals Box Dimensions: 1"H x 3"W x 8"L WT: 0.29 lbs UPC: 840248206211 Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Butt Connector - 100 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #12-10 AWG Insulation Color: Yellow Max Wire Insulation Outer Diameter (inch): 0.28" Package Size: One-hundred Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Package Qty: 100 Type: Butt Connectors Box Dimensions: 2"H x 5"W x 9"L WT: 0.8 lbs UPC: 840248206693 Quick Guide (pdf)

Read more less

4016 Straight Terminal CableCap - SmallInsulates battery terminals which have standard automotive posts.Features:Designed to fit standard automotive postsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2304 MiniBus 100 Ampere Common BusBar 5 x 8-32 Screw TerminalFeatures:Great for limited space applications in electronics cabinets and under dashboardsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2002 PowerPost High Amperage Cable Connector 5/16" Stud Insulated single stainless steel stud terminates multiple large conductors.Features: Connects high amperage cables securely Stud dimensions: 5/16" x 7/8" Base Material is PBT UL94 V0 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2011 PowerPost Mini High Amperage Cable Connector - 1/4" StudInsulated single stainless steel stud terminates multiple large conductors.Features: Connects high amperage cables securely Stud dimensions: 1/4" x 3/4" Base Material is PBT UL94 V0 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2102 PowerPost Plus Cable Connector - 5/16" StudEnables connection of multiple smaller wires in spaces where a traditional bus bar may not fit.Features: 150 Ampere bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 5/16" x 3/4" Base Material is Black Nylon 8231 GHS WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2402 Terminal Black 20AMP - 2 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Busbar HD 8 Stud 650APro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line. Compact footprint saves space Clear, polycarbonate covers insulate and protect on three sides Secure cover attachment does not interfere with cabling Snap-out skirts for flexible cable entry Radiused ends improve cable routing Long, threaded studs to connect up to (4) large cable lugs Plated brass nuts and stainless steel studs prevent thread galling during tightening WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

4008 CableCap - Red 0.47 to 0.13 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2410 Terminal Block 20AMP - 10 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2404 Terminal Black 20AMP - 4 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2512 Terminal Block 30AMP - 12 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PowerPost High Amperage Cable Connector 1/4" StudFeatures: Connects high amperage cables securely Glass-Reinforced Nylon 48 Volts DC Maximum Not rated - Amperage flows between terminals stacked on post and is determined by wire and terminals used WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Insulated Stud Single 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bus Bar HD 3 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line. Compact footprint saves space Clear, polycarbonate covers insulate and protect on three sides Secure cover attachment does not interfere with cabling Snap-out skirts for flexible cable entry Radiused ends improve cable routing Long, threaded studs to connect up to (4) large cable lugs Plated brass nuts and stainless steel studs prevent thread galling during tightening WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

2502 Terminal Block 30AMP - 2 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features: Perfect for passing high current cables through hulls, decks and bulkheads Large cables passed through holes are subject to chafing even when protective grommeting is used. Terminal Feed Through Connectors eliminate chafing and provide excellent strain relief for the cable Large size terminals have a mounting face that can be gasketed or bedded to provide a water tight installation Rated IP66 — withstands water from heavy seas WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

4 Hole Quad Shaped Busbar ConnectorLink Together XD Single, Dual, and Triple XD Relays to multiple sealed fuse blocks or link fuse blocks together for compact installation.Tin-Plated Copper to ensure reliable circuit connectivity and anti-corrosive features keep it last long term.Specifications: Continuous Current (Amps): 500 Max Voltage (Vdc): 72 Material: Tin Plated Copper Size: 90mm x 90mm Thickness: 2.8 mm (1/8") Terminal Stud Hole Size: 10.5mm (3/8")

Read more less

Single 10mm Insulated Stud with Power Tap PlateThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Dual Entry PowerPost Cable Insulator, BlackPart# 4002 Protects against accidental short circuits Top lid allows for easy access to connection point Cable Size: up to 2/0 AWG Cable Size Metric: up to 70 mm² Cable Entry Size: 0.7" (17.8 mm) Color: BlackWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Dual Entry PowerPost Cable Insulator, RedPart# 4003 Protects against accidental short circuits Top lid allows for easy access to connection point Cable Size: up to 2/0 AWG Cable Size Metric: up to 70 mm² Cable Entry Size: 0.7" (17.8 mm) Color: RedWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2406 Terminal Block 20AMP - 6 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Terminal Block 65AMP - 6 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

500A 4 Stud Buss barPro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line. Compact footprint saves space Clear, polycarbonate covers insulate and protect on three sides Secure cover attachment does not interfere with cabling Snap-out skirts for flexible cable entry Radiused ends improve cable routing Long, threaded studs to connect up to (4) large cable lugs Plated brass nuts and stainless steel studs prevent thread galling during tightening WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Busbar 250A 4P & Cover 4X 5/16" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Cover for 2304 and 2305Great for limited space applicationsBase Material: Reinforced PolycarbonateCover Material: Clear PolycarbonateContinuous Amperage: 100 Amperes AC/DCVoltage Rating: 300 Volts AC Maximum / 48 Volts DC MaximumBus Material: Tin-Plated Copper CDA / UNS11000WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2356100 - Water Resistant 100A Busbar with CoverWater-resistant bussing for harsh environments.  Built with wing screws for toolless access.Features:Accepts a wide range of wire sizes Includes 3 wire plugs to maintain a water-resistant rating if less than 4 wires are used Nests with other water-resistant 100A common busbars and ST-Blade water resistant fuse block for space-saving wiring Ideal for positive distribution and for the collection of negative or AC ground circuits Meets ABYC/USCG insulation requirements Tin-plated copper busses and fuse clips Includes four (4) write-on circuit labels Small format standard and custom labels are available Wing-screws designed for tool-free installation of cover to meet ABYC compliance Technical Specifications: Cover - yes Maximum Voltage - 300V AC - 48V DC Terminal Stud - 1 x #10-32 Continuous Rating - 100A AC or DC Bus Material - Tin-plated Copper Mounting Holes - Accepts 1/4" (6mm) screws Terminal Screws - 4 x # 8-32 Wire Size - Input - (1) 8 AWG to 4 AWG  Wire Size - Load - (4) 16 AWG to 10 AWG  In the Box: 2356100 Busbar Instruction Manual *Sold as an Individual  Quick Guide (pdf)

Read more less