• BEP SPST Chrome Plated Toggle Switch - 11/16" Handle - OFF/ON [1002021]

    BEP Marine BEP SPST Chrome Plated Toggle Switch - 11/16" Handle - OFF/ON [1002021]

    SPST Chrome Plated Toggle Switch - 11/16" Handle - OFF/ONSingle pole, single throw toggle switch turns one circuit on and off. Common applications include any single circuit requiring an on-off style switch.Features: Nominal voltage is 12V DC Rated for 10A at 12V DC 11/16" handle and two #6-32 screw terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number M-484 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Chrome Plated Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046808

    $8.99

  • Ancor Pink 14AWG Tinned Copper Wire - 100' [104610]

    Ancor Ancor Pink 14AWG Tinned Copper Wire - 100' [104610]

    Pink 14AWG Tinned Copper Wire - 100'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Pink Length (Feet): 100' Gauge: 14 AWG Box Dimensions: 3"H x 4"W x 4"L WT: 2.05 lbs UPC: 091887105247 Quick Guide (pdf)Owner's Manual (pdf)

    $27.99

  • ProMariner Modified Sine Wave Inverter - 2000W [06200]

    ProMariner ProMariner Modified Sine Wave Inverter - 2000W [06200]

    TruePower Plus Series - Modified Sine Wave Inverter - 2000WHeavy Duty Marine, Mobile and Industrial Grade InvertersOur next generation of TruePower Plus Inverters are designed to convert 12V DC battery power to 115V AC and will automatically pass through AC Inlet power when present. TruePower Plus is rich with features including; Innovative dual color digital LCD message center, dual color gauges for AC power output and battery DC input, USB power port, GFCI convenience outlets, DC cable covers, and separate on/off remote. Our integrated AC cable strain reliefs and front screw connection terminal blocks allow for quick and easy installation without the added need for ring terminals for AC power connections.Designed with soft start noise filtered technology and x2 surge capability for powering demanding loads. Shock resistant construction with internal conformal coated electronics for protection in harsh environments.Features: Intuitive dual color digital LCD message center Dual color gauges for AC power output and battery DC input Internal 30 amp AC transfer switch will automatically pass through AC inlet power when present USB power port and GFCI convenience outlets Compact and lightweight design Soft start noise filtered technology with x2 surge capability On/Off remote with 9 foot cable and DC cable covers Included Integrated AC power cable strain reliefs for ease of installation Built-in safety with overload, over temperature, short circuit and reverse polarity protection Audible alarm and shut down for low and high DC voltage, overload and over temperature conditions. Shock resistant construction with internal conformal coated electronics 2 year warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 2000w AC Connection Type: GFCI Outlet DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 2 Duplex GFCI Inverter Surge Rating: 4000w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Waveform: Modified Sine Wave Box Dimensions: 7"H x 12"W x 17"L WT: 12.75 lbs UPC: 031669062009 Owner's Manual (pdf)Brochure (pdf)

    $459.99

  • ProMariner ProNautic 1220P 20 Amp 3 Bank Battery Charger [63120]

    ProMariner ProMariner ProNautic 1220P 20 Amp 3 Bank Battery Charger [63120]

    Package Contents:All Digital Electronic ChargingIndustry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today's power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.ProMar Digital Performance ChargingProMar Digital Charging Performance - 12 Selectable ProfilesUp to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.Power Factor Correction - Global AC InputAuto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.Distributed On Demand TechnologyAutomatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.Digital Self-Calculating Absorption and Battery Health Re-Conditioning ModeAutomatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.Conservation Energy Saver ModeAfter 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)Service and Fault Mode LED IndicatorsReal time indication of wiring faults or adverse conditions that may impact the operation of a boat's charging system.Automatic Fan Speed ControlQuiet operation. Innovative front exhaust prevents restriction of air flow and cooling.Automatic Temperature Compensation and Built-in SafetyRemote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.Package Contents:ProNautic ChargerParts package including:.a. Owners/Installation Manualb. Warranty Cardc. Temperature ProbeWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output - Amps: 20a Charging Banks: 3 Portable: No Charger Input - Voltage: 120/240v Charger Output Voltage: 12v Box Dimensions: 6"H x 11"W x 13"L WT: 6.35 lbs UPC: 031669631205 Owner's Manual (pdf)Brochure (pdf)

    $539.99

  • Ancor Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 2-Pack [252244]

    Ancor Ancor Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 2-Pack [252244]

    Heavy Duty Lugs - 6 Gauge Wire - 1/4" Post - 2-PackCable Gauge: 6Screw Size: 1/4" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Post Size: 1/4" Package Qty: 2 Heat Shrink: No Gauge: 6 AWG Type: Lugs Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 091887252040 Quick Guide (pdf)

    $3.99

  • Blue Sea 7349 A-Series Double Pole Toggle - 32A - Black [7349]

    Blue Sea Systems Blue Sea 7349 A-Series Double Pole Toggle - 32A - Black [7349]

    A-Series Toggle Double PolePN: 7349Poles: 2Color: BlackAmperage: 32AFeatures: Meets American Boat and Yacht Council (ABYC) standards UL 1077 recognized, TUV certified, CE marked for Europe and CSA certified for Canada The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Used as AC Main circuit protection "Trip Free" design cannot be held "ON" during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 32a Box Dimensions: 1"H x 1"W x 3"L WT: 0.2 lbs UPC: 632085073497

    $47.99

  • Blue Sea 5034 ST Blade Fuse Block w/out Cover - 12 Circuit w/out Negative Bus [5034]

    Blue Sea Systems Blue Sea 5034 ST Blade Fuse Block w/out Cover - 12 Circuit w/out Negative Bus [5034]

    5034ST Blade Fuse Block w/out Cover - 12 Circuit w/out Negative Bus Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit Accepts ATO and ATC fast acting blade fuses WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ATO/ATC Type: Fuse Blocks Box Dimensions: 1"H x 2"W x 6"L WT: 1 lbs UPC: 632085050344 Owner's Manual (pdf)

    $52.99

  • Blue Sea 7492 360 Panel - Rocker Switch DPDT - ON-OFF-ON [7492]

    Blue Sea Systems Blue Sea 7492 360 Panel - Rocker Switch DPDT - ON-OFF-ON [7492]

    360 Panel - Rocker Switch DPDT - ON-OFF-ONFor use in 360 panels in the following modules: Gauge, DC Push Button + Switch, and DC Battery ManagementThe 360 Panel System uses an open frame to mount a broad selection of modules, allowing multiple functions to be combined in a single panel.This innovative design offers a wide choice of panel features, can accommodate future changes and permits rapid assembly. With options ranging from battery management to source selection, the 360 Panel System provides unmatched design flexibility.Specifications: Action*: ON-OFF-ON Pole/Throw**: DPDT Maximum Amperage***:8A @ 125V AC / 5A @ 12V DC / 5A @ 24V DC / 4A @ 250V AC Terminal Type: Wire Leads Terminal Size: 6.00" (152.4mm) Weight:0.08lb (0.04kg) *Action () = Momentary ON**Pole/Throw: SPST - Single Pole/Single ThrowSPDT - Single Pole/Double ThrowDPST - Double Pole/Single ThrowDPDT - Double Pole/Double Throw***Maximum Amperage - Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Black Action: ON-OFF-ON Box Dimensions: 1"H x 2"W x 7"L WT: 0.2 lbs UPC: 632085074920 Quick Guide (pdf)Brochure (pdf)

    $4.99

  • Blue Sea 7295 A-Series Double Pole Toggle - 32A - White [7295]

    Blue Sea Systems Blue Sea 7295 A-Series Double Pole Toggle - 32A - White [7295]

    A-Series Toggle Double PolePN: 7295Poles: 2Color: WhiteAmperage: 32AFeatures: Meets American Boat and Yacht Council (ABYC) standards UL 1077 recognized, TUV certified, CE marked for Europe and CSA certified for Canada The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Used as AC Main circuit protection "Trip Free" design cannot be held "ON" during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 32a Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 632085072957

    $47.99

  • Ancor Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm Red/Black - 500' [121950]

    Ancor Ancor Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm Red/Black - 500' [121950]

    Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm² Red/Black - 500'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Black Length (Feet): 500' Gauge: 18/2 AWG Box Dimensions: 10"H x 11"W x 11"L WT: 17.35 lbs

    $178.99

  • Ancor Standard Duplex Cable - Flat 8/2 AWG - 2 x 8mm Red/Black - 50' [120905]

    Ancor Ancor Standard Duplex Cable - Flat 8/2 AWG - 2 x 8mm Red/Black - 50' [120905]

    Standard Duplex Cable - Flat 8/2 AWG - 2 x 8mm² Red/Black - 50'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Black Length (Feet): 50' Gauge: 8/2 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 12.2 lbs UPC: 091887120905

    $116.99

  • Blue Sea 5060 Crimpable Inline Fuse Holder AGC MDL [5060]

    Blue Sea Systems Blue Sea 5060 Crimpable Inline Fuse Holder AGC MDL [5060]

    Crimpable In-Line Fuse Holder Accepts 12-18 AWG wire 30A Maximum fuse amperage Fuse sold seperatelyWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: AGC/MDL Type: Fuse Holders Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 632085050603

    $6.99

  • Sea-Dog Buss Bar w/Cover - 6 Terminals [426692-3]

    Sea-Dog Sea-Dog Buss Bar w/Cover - 6 Terminals [426692-3]

    Buss Bar with Cover - 6 TerminalsThis bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.Features: Includes two 5/16"-18 stainless steel stud terminals and six #10-32 stainless steel screw terminals Installs with four #8 FH fasteners (included) 48VDC, 300A; 300VAC, 300A maximum CE and RoHS compliant Specifications: Terminals: 6 Length (inch): 5-1/2" Width (inch): 2-3/4" Depth (inch): 1-11/16" Max. Amps: 300 Fastener: #8 FH Weight: 0.68 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $34.99

  • Perko Watertight Cable Outlet f/5/16" Cable Chrome Plated Brass [0424DP0CHR]

    Perko Perko Watertight Cable Outlet f/5/16" Cable Chrome Plated Brass [0424DP0CHR]

    Watertight Cable Outlet for 5/16" Cable Chrome Plated BrassThe chrome plated brass watertight cable outlet is designed for use with a 5/16 in. OD cable. Equipped with rubber grommet for watertight passage of cable. Base diameter: 1-1/4 in. Built from quality materials for long-lasting durability.Features: Watertight cable outlet Chrome plated brass Diameter base: 1-1/4 in. Built with quality materials Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 6"L WT: 0.1 lbs UPC: 085226020674

    $34.99

  • Ancor Twisted Pair w/Shield - 14/2 AWG - Round - Red/Black - 100' [141410]

    Ancor Ancor Twisted Pair w/Shield - 14/2 AWG - Round - Red/Black - 100' [141410]

    Twisted Pair w/Shield - 14/2 AWG - Round - Red/Black - 100'Twisted pairs cable with shield are made with premium tinned copper for use in all metal boats and around sensitive electronics.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Black Length (Feet): 100' Gauge: 14/2 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 10 lbs UPC: 091887140071

    $270.99

  • Xantrex Prosine Remote Panel Interface Kit f/1000 & 1800 [808-1800]

    Xantrex Xantrex Prosine Remote Panel Interface Kit f/1000 & 1800 [808-1800]

    Prosine Remote Panel Interface KitThe Xantrex Sine Wave Inverter Interface Panel allows the standard LCD panel to be removed and mounted remotely in the location of your choice. Supplied with 30' (10M) of telephone cable.Features: Standard Telephone Jack Outlet for connection to the LCD Panel LED indicator for basic status monitoring ON/Bypass switch Mounts into the existing cavity in place of the Standard LCD Panel No special wiring required internal filtering reduces interference generated along cable, improving overall performance WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

    $73.99

  • Ancor 16-14 Gauge - 5/16" Heat Shrink Ring Terminal - 3-Pack [311503]

    Ancor Ancor 16-14 Gauge - 5/16" Heat Shrink Ring Terminal - 3-Pack [311503]

    16-14 Gauge - 5/16" Heat Shrink Ring Terminal - 3-PackWire Range:16-14Screw Size:5/16"Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Package Qty: 3 Heat Shrink: Yes Type: Ring Terminals Post Size: 5/16" Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 091887313147 Quick Guide (pdf)

    $2.99

  • Blue Sea 7217 AC / DC Single Pole Magnetic World Circuit Breaker  -  25 Amp Red [7217]

    Blue Sea Systems Blue Sea 7217 AC / DC Single Pole Magnetic World Circuit Breaker - 25 Amp Red [7217]

    AC / DC Single Pole Magnetic World Circuit BreakerThe World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.PN:   7217Color:   RedAmperage:   25 AmpDelay:   StandardFeatures: The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Single pole Quick Trip models are designed specifically for electronics protection "Trip Free" design cannot be held "ON" during fault current condition Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 277 Volts AC / 65 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 25a Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs UPC: 632085072179

    $20.99

  • Marinco 14/3 Locking Extension Cord - 15A - 50' [150050]

    Marinco Marinco 14/3 Locking Extension Cord - 15A - 50' [150050]

    14/3 Locking Extension Cord - 15A - 50'Marinco 15A extension cords feature marine-grade 14/3 SJTOW cable and a universal slide button lock on the female end for protection against cable disconnection. The lighted female end provides visual power indication.Features: Clear ends with lighted female end for visual power indication 14/3 marine grade SJTOW cable Female end contains slide button lock for protection against cable disconnection Slide button lock compatible with all other manufacturers' products ETL certified to UL standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 15a Length: 50' Type: Cordset Box Dimensions: 3"H x 7"W x 15"L WT: 5 lbs UPC: 093344062117

    $38.99

  • Marinco Pigtail Adapter - 15A Female to 30A Male [105SPP]

    Marinco Marinco Pigtail Adapter - 15A Female to 30A Male [105SPP]

    Pigtail Adapter Plus105SPPFeatures Plus version of 105A with LED Power Indicator Light Female Connector: 15A 125V Straight Blade attaches to 30A 125V cordset or boat inlet Boat Side: Female Connector 15A 125V Locking w/Sealing Collar System Attaches to boat inlet or cordset Dock Side: Male Plug 30A 125V Locking Attaches to dockside receptacle or cordset WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 7"W x 12"L WT: 1.2 lbs UPC: 093344304682 Quick Guide (pdf)Brochure (pdf)

    $67.99

  • ProMariner ProIsoCharge Battery Isolator 120Amp 1-Alt 2-Bat - 12V [23121]

    ProMariner ProMariner ProIsoCharge Battery Isolator 120Amp 1-Alt 2-Bat - 12V [23121]

    ProIsoCharge SeriesModelProIsoCharge120 1•2 Part No. 23121System Volts DC 12Max DC Amps 120 AmpAlternator Input1Battery Outputs 2Size 5.35"(l) x 5.875"(w) x 3.125"(h)Weight2 lbsSignificantly Smarter...ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of up to 3 other battery banks off a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Smart enough to provide priority charging to a battery bank that's under load by taking fully charged batteries off line. The all-in-one design eliminates the need for multiple voltage sensitive relays to charge multiple battery banks simultaneously, saving space, installation time and cost. Ensuring fully charged batteries and faster charge times, ProIsocharge eliminates the typical alternator voltage loss of 0.6VDC that's commonly associated with traditional diode based isolators. Installed with the ProNauticP Series, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... boating.Intelligent Alternator Power Distribution SystemProMar Digital Performance Zero Volt Loss Isolation and ChargingAll digital design delivers active battery status and automatic engine battery healthpriority while digitally distributing the full output of your engine's alternators.Intelligent Isolation and Charging Software ControlProIsoCharge's intelligent software control provides priority charging to a battery bank thatis under load (i.e house bank or power inverter bank) by taking fully charged batteries off lineand priority charging discharged battery banks, while insuring the health of the engine batteries.Real Time LED Status IndicatorsHighly visible LEDs to indicate alternator power is present and battery bank charging status.Fault LEDs include: high and low alternator output, over-voltage protection and high voltageconditions that may be present on any one of the battery banks connected (that are alsoconnected to other charging sources gen set combi etc).Ignition ControlledDistributed On Demand™ battery bank management will only activatewith ignition power on.Advance Regulator ReadyAdvance regulator remote sense connection provided for precision alternatoralgorithm control for alternators equipped with an advanced regulator.Easy InstallationModular design for easy install. Includes all terminal stud insulator bootsand protective snap on safety cover.Built-in SafetyIgnition protected and waterproof to IP66. FIVE YEARWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

    $142.99

  • Newmar BB-2 Bus Bar [BB-2]

    Newmar Power Newmar BB-2 Bus Bar [BB-2]

    BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 2 Size (inches): 1/16" x 1 1/2"

    $67.99

  • Newmar BB-8 Bus Bar [BB-8]

    Newmar Power Newmar BB-8 Bus Bar [BB-8]

    BB-8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 8 Size (inches): 9-1/16” x 1-1/2”

    $165.99

  • Newmar ACCY-IBX Blank Panel [ACCY-IBX]

    Newmar Power Newmar ACCY-IBX Blank Panel [ACCY-IBX]

    ACCY-IBX Blank PanelThis versatile panel is ideal when only a limited number of electrical circuits are needed or for larger systems where their modular design makes for an easy and attractive expansion of existing system capacity.Stock panels with breakers installed come standard with DC indicator lights but may be specially ordered with AC indicator lights. Blank versions of the panels have all the necessary hardware to install indicator lights and breakers. All panels are provided with a circuit identification label set of 22 common on-board electrical functions. ACCY-IBX is a blank version of ACCY-IX. No breakers or indicator lights are provided. Label set, indicator light, and breaker mounting hardware are provided.Specifications: Cut-Out Dimensions: 4 x 6 inches (10.2 x 15.2 centimeters) Weight: 1 lb.

    $161.99

  • Victron Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP [ORI242440140] Victron Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP [ORI242440140]

    Victron Energy Victron Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP [ORI242440140]

    Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMPThe Orion-Tr Smart DC-DC charger is a professional DC-to-DC adaptive 3-stage charger with built-in Bluetooth.Bluetooth Smart Enabled: Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available. Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product.   Fully Programmable: Battery charge algorithm (configurable) or fixed output.  Smart alternator compatibility: engine running detection mechanism.   Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float: For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries, the absorption time is fixed (the default is 2 hours). Alternatively, a fixed output voltage can be chosen.   Remote On/Off:A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).  All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current:An unlimited number of units can be connected in parallel.High Temperature Protected:The output current will reduce at high ambient temperatures.  IP43 Protection:When installed with the screw terminals oriented downward.  Screw Terminals:No special tools are needed for installation.  Input fuse (not replaceable) Specifications: Input Voltage Range: 20-35 V Under Voltage Shut Down: 14 V Under Voltage Restart: 15 V Nominal Output Voltage: 24.2 V Output Voltage Adjust Range: 20-30 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 17 A Maximum Output Current (10 S) at Nominal Output Voltage: 25 A Short Circuit Output Current: 40A Cont. Output Power at 25 Degrees C: 480 W Cont. Output Power at 40 Degrees C: 400 W Efficiency: 89% No Load Input Current (2): < 80 mA  Standby Current: Less than 1 mA Galvanic Isolation: 200 VDC between input, output, and case Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C) Humidity: Max. 95 % non-condensing DC Connection: Screw terminals Maximum Cable Cross-Section: 16 mm² AWG6 Weight: 1,6 kg (3.5 lb) Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch) Protection Category: IP43 (electronic components), IP22 (connection area) Safety Standards: EN 60950 Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 24v Charger Output - Amps: 17a Charger Output Voltage: 24v Charging Banks: 1 Portable: No Box Dimensions: 4"H x 5"W x 8"L WT: 3.5 lbs UPC: 8719076048985 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    $215.05

  • Blue Sea 4217 Square Format Label Set - 120 [4217]

    Blue Sea Systems Blue Sea 4217 Square Format Label Set - 120 [4217]

    4217Square Format Label Set120 Black DC labels 120 common DC labels Reinforced, weatherproof material Used on WeatherDeck Waterproof Panels Used on Battery Management Panels Used on 360 Panel System WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $20.99

  • Victron Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP [ORI242440120] Victron Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP [ORI242440120]

    Victron Energy Victron Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP [ORI242440120]

    Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMPThe Orion-Tr Smart DC-DC charger is a professional DC-to-DC adaptive 3-stage charger with built-in Bluetooth.Bluetooth Smart Enabled: Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available. Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product.   Fully Programmable: Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism.   Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float: For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries, the absorption time is fixed (the default is 2 hours). Alternatively, a fixed output voltage can be chosen.   Suitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines):The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents the unwanted discharge of the starter battery (see manual for details).  Remote On/Off:A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).  All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current:An unlimited number of units can be connected in parallel.High Temperature Protected:The output current will reduce at high ambient temperatures.  IP43 Protection:When installed with the screw terminals oriented downward.  Screw Terminals:No special tools are needed for installation.  Input fuse (not replaceable) Specifications: Input Voltage Range: 20-35 V Under Voltage Shut Down: 14 V Under Voltage Restart: 15 V Nominal Output Voltage: 24.2 V Output Voltage Adjust Range: 20-30 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 17 A Maximum Output Current (10 S) at Nominal Output Voltage: 25 A Short Circuit Output Current: 40A Cont. Output Power at 25 Degrees C: 480 W Cont. Output Power at 40 Degrees C: 400 W Efficiency: 89% No Load Input Current (2): < 80 mA  Standby Current: Less than 1 mA Galvanic Isolation: 200 VDC between input, output, and case Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C) Humidity: Max. 95 % non-condensing DC Connection: Screw terminals Maximum Cable Cross-Section: 16 mm² AWG6 Weight: 1,6 kg (3.5 lb) Dimensions (h x w x d) 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch) Protection Category: IP43 (electronic components), IP22 (connection area) Safety Standards: EN 60950 Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    $243.95

  • Victron Smart BMS 12/200 f/Victron LIFEPO4 Batteries 12VDC Only [BMS210055000] Victron Smart BMS 12/200 f/Victron LIFEPO4 Batteries 12VDC Only [BMS210055000]

    Victron Energy Victron Smart BMS 12/200 f/Victron LIFEPO4 Batteries 12VDC Only [BMS210055000]

    Smart BMS 12/200 for Victron LIFEPO4 Batteries 12VDC OnlyThe Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats.It combines a Current Limiter, Battery Combiner, and Battery Protector in a robust and compact solution and lets you safely connect any size 12V alternator (and starter battery), loads, and chargers to Smart Lithium batteries.The Smart BMS 12/200 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources, or DC loads in case of low battery cell voltage, high battery cell voltage, or over temperature.The dedicated alternator connection provides current limiting and one-way traffic from the alternator into the battery, so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery (or battery bank) and the starter battery is protected from excessive discharge.The BMS is equipped with Bluetooth for monitoring and configuration, a remote on/off the connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    $232.90

  • Victron Buck-Boost DC-DC Converter - 50A [ORI303050000] Victron Buck-Boost DC-DC Converter - 50A [ORI303050000]

    Victron Energy Victron Buck-Boost DC-DC Converter - 50A [ORI303050000]

    Buck-Boost DC-DC Converter - 50ADC-DC Converter for charging a 12/24V service battery in vehicles with an intelligent dynamo. The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12/24V service battery in vehicles with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    $851.70

  • Victron Lynx Shunt VE. Can [LYN040102100] Victron Lynx Shunt VE. Can [LYN040102100]

    Victron Energy Victron Lynx Shunt VE. Can [LYN040102100]

    Lynx Shunt VE. Can The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built in battery monitor accurately monitors the state of charge of your battery.  The Lynx shunt contains a positive bus-bar with space to mount a CNN fuse and a negative bus-bar with a shunt. It also contains battery monitoring electronics. The Lynx shunt can send via the VE.CAN bus battery monitoring information to a CCGX or VGX or to a third party CANbus monitoring system, such as a NMEA2000. The CCGX, VGX or third party display acts as battery monitor display and is also used to set up the built-in battery monitor.The Lynx shunt is available with a VE.Can connection.  Fuse CIP140325000 - Fuse CNN 325A/80V for Lynx shunt, or alternatively a CNN fuses by Littlefuse can be used.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Lugs Box Dimensions: 4"H x 7"W x 12"L WT: 3.4 lbs UPC: 8719076022602 Quick Guide (pdf)

    $355.30

  • Victron Phoenix Inverter 24 VDC - 800W - 120 VAC - 50/60Hz [PIN241800500] Victron Phoenix Inverter 24 VDC - 800W - 120 VAC - 50/60Hz [PIN241800500]

    Victron Energy Victron Phoenix Inverter 24 VDC - 800W - 120 VAC - 50/60Hz [PIN241800500]

    Phoenix Inverter 24 VDC - 800W - 120 VAC - 50/60HzInverters allow you to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 1600w Waveform: Pure Sine Wave Inverter Output Voltage: 110v Inverter Input Voltage: 9-17v Inverter Cont. Output Wattage: 800w GFCI: No DC Connection Type: Hardwire AC Connection Type: Hardwire Box Dimensions: 8"H x 11"W x 14"L WT: 14.7 lbs UPC: 8719076038450 Quick Guide (pdf)Brochure (pdf)

    $236.30

  • Attwood Heavy-Duty All-Plastic Adjustable Battery Tray - 27 Series [9098-5]

    Attwood Marine Attwood Heavy-Duty All-Plastic Adjustable Battery Tray - 27 Series [9098-5]

    Heavy-Duty All-Plastic Adjustable Battery Tray - 27 SeriesAll-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fade Ergonomic nuts and bolts easily secure batteries WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $10.99

  • Ancor Nylon Fully Insulated Disconnect - Female - 22-18 - 25-Piece [211408]

    Ancor Ancor Nylon Fully Insulated Disconnect - Female - 22-18 - 25-Piece [211408]

    Nylon Fully Insulated Disconnect - Female - 22-18 - 25-PieceAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: 0.250 (6.4 mm) tab size Nylon insulated with insulation grip Double crimp, funnel entry UL 310 Specifications: Gauge: 22-18 AWG Heat Shrink: No Package Qty: 25 Type: Disconnects Box Dimensions: 1"H x 3"W x 4"L WT: 0.05 lbs UPC: 091887214086

    $10.99

  • Ancor Stainless Steel Cushion Clamp - 2" - 10-Pack [404202]

    Ancor Ancor Stainless Steel Cushion Clamp - 2" - 10-Pack [404202]

    Stainless Steel Cushion Clamps - 2" - 10-PackStainless steel cushion clamps prevent corrosion and are resistant to oils, acids and salt water.Features: Temperatures range from -50° to 300° F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cusion Clamp Box Dimensions: 2"H x 6"W x 9"L WT: 0.9 lbs UPC: 091887807448

    $19.99

  • Blue Sea 3002 HD-Series Battery Switch Selector [3002] Blue Sea 3002 HD-Series Battery Switch Selector [3002]

    Blue Sea Systems Blue Sea 3002 HD-Series Battery Switch Selector [3002]

    3002 HD-Series Battery Switch SelectorFeatures: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected - safe for installation aboard gasoline powered boats .870" (22.01mm) stud length to accept 4 or more cable terminals 1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht Council (ABYC) requirements for battery switches Tactile textures indicate knob position by feel only Case design allows surface or rear panel mounting Fits all Perko and Guest low amperage battery switch hole patterns WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $104.99

  • Ancor 16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 100-Pack [311699]

    Ancor Ancor 16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 100-Pack [311699]

    16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 100-PackWire Range:16-14Screw Size:3/8"Quantity: 100Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Ring Terminals Package Qty: 100 Heat Shrink: Yes Box Dimensions: 3"H x 3"W x 7"L WT: 0.4 lbs UPC: 091887313246 Quick Guide (pdf)Brochure (pdf)

    $34.99

  • ProMariner ProSportHD 12 Gen 4 - 12 Amp - 2 Bank Battery Charger [44012]

    ProMariner ProMariner ProSportHD 12 Gen 4 - 12 Amp - 2 Bank Battery Charger [44012]

    ProSportHD 12 Gen 4 - 12 Amp - 2 Bank Battery ChargerProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. Features: ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication Lightweight Design Up to 40% lighter compared to an epoxy filled charger Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B Easy Installation and Operation Pre-wired with 6’ AC and DC cables Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries 3 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Portable: No Charging Banks: 2 Charger Output Voltage: 12/24v Charger Output - Amps: 12a Charger Input - Voltage: 120v Box Dimensions: 6"H x 9"W x 13"L WT: 7.3 lbs UPC: 031669440128

    $204.99

  • Guest 2112A Battery On/Off Switch Universal Mount w/o AFD [2112A]

    Guest Guest 2112A Battery On/Off Switch Universal Mount w/o AFD [2112A]

    2112A Battery On/Off Switch Universal Mount without AFD Universal mount switches have longer stud lengths for improved assembly and easier cable routing. They are built with heavy-duty copper sweep contacts to ensure positive circuit control. Rugged internal components are protected by a tough, impact-resistant polycarbonate housing that is impervious to the elements.Features: Cable Lug Size: 3/8" Dimensions: 5.0" x 2.75" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $42.99

  • Ancor 6 to 1/0 AWG Heavy-Duty Hex Lug & Terminal Crimper [703050]

    Ancor Ancor 6 to 1/0 AWG Heavy-Duty Hex Lug & Terminal Crimper [703050]

    6 to 1/0 AWG Heavy-Duty Hex Lug & Terminal CrimperThis crimper uses revolving dies to create a hex style crimp for 6 AWG to 1/0 AWGLength 15.4" (39 cm)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $174.99

  • Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 6" - 5-Pack - Black [304106]

    Ancor Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 6" - 5-Pack - Black [304106]

    Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 6" - 5-Pack - BlackPackage of 5 Black 6"(15.2cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)Wire Range: 12-8 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 8"L WT: 0.2 lbs UPC: 091887303384

    $9.99

  • Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 6" - 5-Pack - Black [305106]

    Ancor Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 6" - 5-Pack - Black [305106]

    Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 6" - 5-Pack - BlackPackage of 5 Black 6"(15.2cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm)Wire Range: 8-4 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 8"L WT: 0.1 lbs UPC: 091887304527

    $11.99

  • Ancor Stainless Steel Cushion Clamp - 9/16" - 10-Pack [403562]

    Ancor Ancor Stainless Steel Cushion Clamp - 9/16" - 10-Pack [403562]

    Stainless Steel Cushion Clamp - 9/16" - 10-PackNominal Diameter:9/16" (14mm)Thickness: 0.06Width: 1/2" (13mm)Screw Size: #10 Prevents corrosion Resistant to oils, acids, saltwater Temperatures range from -50° to 300°F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cusion Clamp Box Dimensions: 2"H x 3"W x 8"L WT: 0.3 lbs UPC: 091887403565

    $11.99

  • Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - 100-Pack [312699]

    Ancor Ancor 12-10 Gauge - 3/8" Heat Shrink Ring Terminal - 100-Pack [312699]

    12-10 Gauge - 3/8" Heat Shrink Ring Terminal - 100-PackGauge Size: 12-10Screw Size: 3/8"Quantity: 100Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Ring Terminals Package Qty: 100 Heat Shrink: Yes Post Size: 3/8" Box Dimensions: 2"H x 3"W x 8"L WT: 0.5 lbs UPC: 091887316247 Quick Guide (pdf)

    $47.99

  • Marinco Sealink Plug & Receptacle - 12V [12VPK]

    Marinco Marinco Sealink Plug & Receptacle - 12V [12VPK]

    Sealink 12V Plug & Receptacle12VPKProduct Features: SeaLink Deluxe 12 Volt Receptacle and Plug Part Nos. 12VRC & 12VPG packaged together WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs UPC: 093344304477

    $18.99

  • Blue Sea 5257 MIDI/AMI Fuse 125 Amp - Pair [5257]

    Blue Sea Systems Blue Sea 5257 MIDI/AMI Fuse 125 Amp - Pair [5257]

    Fuse MIDI/AMI 125A - PairFeatures: Compact fuse with 125A amperage Tin-plated copped for corrosion resistance Clear cover offers visible indication of blown fuses Color-coded for easy amperage identification Ignition protected to SAE J1171 when used with Blue Sea Systems SafetyHub family of products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 125a Fuse Type: MIDI/AMI Type: Fuses Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 632085052577 Brochure (pdf)

    $6.99

  • Blue Sea 7185 70 Amp Circuit Breaker Surface Mount 285 Series [7185]

    Blue Sea Systems Blue Sea 7185 70 Amp Circuit Breaker Surface Mount 285 Series [7185]

    285-Series Thermal Circuit Breaker Surface Mount, 70A Drop-in replacement for 185-series Circuit Breakers Visible reset lever shows open condition "Trip Free" - cannot be held closed after tripWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 70a Box Dimensions: 2"H x 4"W x 8"L WT: 0.3 lbs UPC: 632085171858 Brochure (pdf)

    $56.99

  • Xantrex 25' Network Cable f/SCP Remote Panel [809-0940]

    Xantrex Xantrex 25' Network Cable f/SCP Remote Panel [809-0940]

    Standard Cat 5 Cable for SCP Remote Panel - 25'WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

    $29.99

  • Victron Argo FET Battery Isolator - 100AMP - 2 Batteries [ARG100201020] Victron Argo FET Battery Isolator - 100AMP - 2 Batteries [ARG100201020]

    Victron Energy Victron Argo FET Battery Isolator - 100AMP - 2 Batteries [ARG100201020]

    Argo FET Battery Isolator - 100AMP - 2 BatteriesSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

    $100.30

Electrical
Footer image

© 2026 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account