32-12-15 DC ConverterConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features: Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating The heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments Numerous Converter and Load Protection Circuits: Current limiting Automatic thermal shutdown Short circuit proof Reverse polarity Overvoltage protection Carries CE mark Specifications: Input Voltage: 20-50 Output Voltage: 13.6 Output Amps (Intermittent): 15 Output Amps (Continuous): 15 Case Size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters) Weight: 5 lb. (2.3 kg) Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify) Ripple: 150 mV P-P maximum Regulation: 1% Line/Load Switching Frequency: 40 kHz Efficiency: 85% – Typical. Isolation: Output/Chassis; Input/chassis: 250 VDC Duty Cycle Ratings*: Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating. Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time Idle Current: Less than 100 mA (including power “ON” light) Operating Temp Specifications: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature Model 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C Mechanical Specifications: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal coated PC board Options: Operation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory) Extreme vibration mounting kit. (Information below) Option: Extreme Vibration Mounting KitThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Power-Pac 14AH Power Supply  The 12V DC power supply features built-in backup batteries, which are charged during normal operation and then continue to power radios and critical navigation equipment when AC power is lost. The Power-Pac is ideal for commercial vessels, work boats, and yachts.The Power-Pac’s highly regulated, low-rising 10-amp output powers radios and other sensitive communications equipment without causing RF or audio interference. At the same time, it floats and charges one or two (depending on the model) built-in 7-amp/hour backup batteries. These are kept at peak charge during the normal functioning of the unit when AC is being supplied. In the event of a loss of AC power, the internal batteries automatically take over to power communication equipment, providing a true uninterruptible DC source.Features: Highly regulated, low ripple, noise-free 12-volt output Built-in, “on-line” stand-by battery provides immediate backup power in case of AC power loss Internal mounting space and terminals for conversion of the 7 A/H model into the 14 A/H model Output “Normal” indicator L.E.D. “Back-up power only” warning light Audible and visual low battery (10.7 VDC) voltage indicators Low battery warning buzzer mute switch Automatic low battery (10.3 VDC) voltage disconnect Low voltage disconnect override button Over-voltage protection Current limit protection Input/output fused Separate output terminals are provided for charging external batteries 115/230 50-60 Hz input, selected by a slide switch on the rear panel Specifications: Battery Capacity: 14 amp/hour   Case Size (H x W x D): 5.3 x 9.0 x 10.5 inches (13.3 x 22.9 x 26.7 centimeters)   Weight: 24 lbs. (10.9 kg) Input: 115/230 VAC, 50-60 Hz. Output: 13.6 VDC @ 5A cont., 10A Int. Regulation: 1% line and load Ripple: 1% P-P Operating Temp: 0-40 degrees C With a 14 Amp/Hour Battery Installed, the Unit Provides Approximately the Following Power: 7 amps for 100 min. 10 amps for 60 min. 15 amps for 30 min. 20 amps for 15 min *Assuming battery at full charge when a.c. power failed.The Power-Pac 7 A/H (single battery model) can power a 25-watt transceiver for up to 3 hours, based on a 20% transmit/receive duty cycle. Power-Pac 14 A/H can provide the same service for up to 6 hours. Provision is made for expanding backup power up to twelve hours (in this example, longer under lesser loads) with the installation of additional externally wired batteries (total 28 amps/hours max.). Batteries are automatically recharged when the AC is restored.The operator is kept informed of all important functions, such as AC input, DC output, and battery status, with front panel indicator lights and a low battery warning buzzer.Protection: AC Input fuse Internal and external Battery fuses Over Voltage Current Limit Automatic Thermal Shutdown Low Battery Disconnect Mechanical Details: Vinyl Laminated aluminum case 6’ standard AC power cord Ac input selector switch Battery Details: Sealed Lead Acid, Deep-cycle. Certified by DOT and IATA for shipment by Air Weight per 7 AH Battery: 6 lbs. Size (inch): 6” x 3.75” x 2.5” Options: Form C AC Failure Contacts (Contact factory for details) Extra batteries, sold separately 7 A/H increments; each Power Pac will accommodate 28 A/H max. (14 internal, 14 external) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Alternator 250 AMP Kit 12V 3.15" Dual Foot Saddle J10 Pulley Regulator & Temp SensorKit Includes: XT-DF-250-J10 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 250A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-MC-200-KIT, AT-DF-200-J10-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 250A Voltage: 12v Box Dimensions: 11"H x 11"W x 14"L WT: 21 lbs UPC: 676205502276 Brochure (pdf)

Read more less

Alternator 120 AMP 12V 1-2" Single Foot Spindle Mount Dual Vee Pulley Regulator & Temp SensorKit Includes: 621-120-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware621-120-DV Alternator: 120A, 12V, Spindle Mount (Single Foot), 1-2in, Dual Deep Vee Pulley, Isolated Ground1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesReplaces: 621-VUP-MC-120-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Alternator 120 AMP 12V 3.15" Dual Foot Saddle Dual Pulley with Isolated GroundAlternator, 60 Series, 120A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated Ground Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-120-SR-IGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 120A Voltage: 12v Box Dimensions: 9"H x 10"W x 10"L WT: 13.65 lbs UPC: 676205131025 Brochure (pdf)

Read more less

Alternator 120 AMP 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp SensorKit Includes: a 60-120-K6 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-120-DV Alternator: 120A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-120-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

CombiMaster 24V - 3000W - 60 Amp (230V)Designed with the customer in mind and using the latest technology, the CombiMaster range is all about user-friendliness and reliability. But don’t let that friendly appearance misguide you: the powerful CombiMaster range drives even the heaviest and most sensitive loads with ease!With the CombiMaster, power dips and failures belong to the past. The automatic AC transfer system switches between generator or mains and inverter output, ensuring a constant power supply. Its Power Assist function prevents tripping of the mains fuse in case you’re connected to a weak land line or small generator.The CombiMaster range delivers unmatched performance and value for money. As you would expect from Mastervolt, the CombiMaster is completed with MasterBus, CZone and NMEA 2000 compatible communication, allowing for a broad range of monitoring and system integration options.Features: Most compact and lightweight Combi in its class. Reliable, hum-free and longer operation from your batteries. Starts even the heaviest and most sensitive loads. Intelligent 3-step+ battery charger for faster and safer charging. Automatic switching between mains and inverter mode. Power Assist prevents blown mains fuses. Generator compatible. Integrated CZone*, MasterBus and NMEA 2000 communication. Quick installation with heavy duty connections. E-mark certified. Remote Control & Monitoring Options: MasterBus compatible via SmartRemote or EasyView 5 display. CZone* / NMEA 2000 compatible via Touch 5 or Touch 10 display. NMEA 2000 compatible via 3rd party multifunctional display WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Contura II Switch SPDT Black - (ON)-OFF-ONVibration, shock, thermoshock, moisture and salt spray resistantMounts in Blue Sea Systems Contura Water Resistant Panels and Contura Switch Mounting PanelsSpecifications: Action: (ON)-OFF-ON Pole/Throw: SPDT - Single Pole/ Double Throw Actuator Color: Black - Contura II Common Applications: Bilge Pumps Maximum Amperage: 20A @ 12V / 15A @ 24V Amperage Operating Current: 18mA (LED) Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Actuator Position to Light LED: ON Embedded LEDs: 1 Lighting: LED rated 100,000 hours 1/2 half Seals: Internal and external gasket panel seal Weight: 0.09lb (0.04 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (On)/Off/On Color: Black Throw/Pole: SPDT Box Dimensions: 2"H x 2"W x 3"L WT: 0.1 lbs UPC: 632085079321

Read more less

50A 125V CordsetEEL ShorePower CordsetsOne Hand. A simple twist. Full Power.The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.Features: Designed for use with standard inlets (NEMA)50A, 125V capacities; 50' length Cord sets meet global industry standards including ABYC and UL New wing-clamp technology provides a true, watertight connection every time Single-handed operation Eliminates the need for a sealing ring Secondary locking feature for added security Built-in LED cord light guides you to a secure connection every time, even in the dark WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 125v Type: Cordset Length: 50' Amperage: 50a Box Dimensions: 9"H x 17"W x 19"L WT: 35.4 lbs UPC: 093344051722 Owner's Manual (pdf)

Read more less

Standard Cordsets50Amp 125/250V PowerCord Plus® Cordsets (4-Wire) All Marinco® cordsets are made of the highest quality, marine-grade construction with features you won't find on other power cords: Watertight molded plug and connector for safety and durability Heavy duty, super flexible marine-grade cable (50 amp 6 gauge) All models include a standard threaded ring for hook-up to ordinary threaded inlets Corrosion resistant, nickel plated contacts Power Indicator Light: Boatside connector features a molded-in LED light. When it glows red, you know you have power to the boat. Contour Grip with Thumbprint Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the 12 o'clock position, the blades line up for easy connection. Marinco's Easy Lock™ system: Quickly locks the cord set to the inlet in just 1/8 of a turn. The exclusive locking tabs engage slots built into all Marinco® inlets. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 125/250v Type: Cordset Length: 50' Amperage: 50a Box Dimensions: 9"H x 17"W x 19"L WT: 38 lbs UPC: 093344309793 Quick Guide (pdf)

Read more less

A-Series Flat Rocker Circuit Breaker - Double Pole - 20AFeatures: Color actuator indicates "OFF" position "Trip Free" design cannot be held "ON" during fault current condition International ON/OFF symbols support vertical or horizontal mounting Specifications: Amperage : 20A AC / 20A DC Actuator Style: Flat Rocker Poles: 2 Maximum Voltage: 120V AC / 240V AC / 32V DC Circuit Breaker Type: Magnetic Hydraulic - trip free Interrupt Capacity: 3000A @ 240V AC / 1500A @ 240V AC[TUV] / 5000A @ 32V DC Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Mounting Screw: #6-32 Stainless Steel Mounting Screw Torque: 6 in-lb (0.68 Nm) Screw Terminal Torque: 14 in-lb (1.58 Nm) Switching Cycles: 10000 Terminal Screw: #10-32 Stainless Steel Weight: 0.38lb (0.17 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 20a Box Dimensions: 2"H x 2"W x 4"L WT: 0.5 lbs UPC: 632085074135

Read more less

9354AC Analog Voltmeter - 2-3/4" Face, 0-250 Volts AC Dial Marked in 5 Volt increments Simple 2-wire connection to AC hot and neutral Meter senses and powers from same connection WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

White 12 AWG Primary Wire - 500'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 12 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 12 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: White Gauge: 12 AWG Length (Feet): 500' Box Dimensions: 7"H x 7"W x 7"L WT: 15 lbs UPC: 840248204859 Brochure (pdf)

Read more less

Blue 16 AWG Primary Wire - 1,000' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Blue Gauge: 16 AWG Length (Feet): 1,000' Box Dimensions: 7"H x 7"W x 8"L WT: 14.8 lbs UPC: 840248201346 Brochure (pdf)

Read more less

Blue 18 AWG Primary Wire - 100' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 18 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 18 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Blue Gauge: 18 AWG Length (Feet): 100' Box Dimensions: 3"H x 5"W x 5"L WT: 1.4 lbs UPC: 840248200882 Brochure (pdf)

Read more less

10/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - 100'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 10 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 10 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 10 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold as an Individual Specifications: Color: Red/Yellow Gauge: 10/2 AWG Length (Feet): 100' Box Dimensions: 7"H x 7"W x 7"L WT: 12.3 lbs UPC: 840248200448 Brochure (pdf)

Read more less

Red 8 AWG Primary Wire - 250' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 8 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 8 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an IndividualRed 8 AWG Primary Wire - 250' Specifications: Color: Red Gauge: 8 AWG Length (Feet): 250' Box Dimensions: 7"H x 10"W x 10"L WT: 20.3 lbs UPC: 840248203395 Brochure (pdf)

Read more less

White 14 AWG Primary Wire - 100'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 14 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 14 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: White Gauge: 14 AWG Length (Feet): 100' Box Dimensions: 3"H x 5"W x 5"L WT: 2.15 lbs UPC: 840248202299 Brochure (pdf)

Read more less

Light Green 14 AWG Primary Wire - 100'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 14 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 14 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Light Green Gauge: 14 AWG Length (Feet): 100' Box Dimensions: 3"H x 4"W x 4"L WT: 2.2 lbs Brochure (pdf)

Read more less

Green 12 AWG Primary Wire - 100' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 12 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 12 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Green Gauge: 12 AWG Length (Feet): 100' Box Dimensions: 3"H x 3"W x 3"L WT: 5 lbs UPC: 840248202497 Brochure (pdf)

Read more less

Red 1/0 AWG Battery Cable - 25' Pacer's 1/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 1/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 1/0 AWG Length (Feet): 25' Box Dimensions: 6"H x 7"W x 7"L WT: 11.9 lbs UPC: 840248204200 Brochure (pdf)

Read more less

7504 DeckHand Dimmer - 6 Amp/24VFeatures: Illuminated exit with adjustable time delay Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights Memory for last setting Provides continuous voltage control from 0 to 100% of input voltage Offset mounting tabs allow dimmers to be mounted close together Retail package includes momentary (ON)-OFF-(ON) switch Specifications: Nominal Voltage: 12 Volts DC Temperature Rating: -40 degrees C to 85 degrees C Maximum Parasitic Current: 2mA WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 2"H x 4"W x 8"L WT: 0.65 lbs UPC: 632085075040 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

A-Series Toggle Double PolePN: 7239Poles: 2Color: BlackAmperage: 40AFeatures: Meets American Boat and Yacht Council (ABYC) standards UL 1077 recognized, TUV certified, CE marked for Europe and CSA certified for Canada The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Used as AC Main circuit protection "Trip Free" design cannot be held "ON" during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 40a Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 632085072391

Read more less

Standard Duplex Cable - Flat 8/2 AWG - 2 x 8mm² Red/Black - 250'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC, and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C), and resists salt water, battery acid, oil, gasoline, heat, abrasion, and ultraviolet radiation. Highest quality ultra-flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Black Length (Feet): 250' Gauge: 8/2 AWG Box Dimensions: 11"H x 11"W x 19"L WT: 54.4 lbs UPC: 091887121117

Read more less

Battery Cable Heat Shrink Tubing - 1" x 12" - Red (3-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 2"H x 4"W x 13"L WT: 0.25 lbs UPC: 840248214599 Brochure (pdf)

Read more less

 Stainless Steel C-Clamp with Neoprene Cushion - 5/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 5/8” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs UPC: 840248216265 Brochure (pdf)

Read more less

Grey 12 AWG Wire Ferrule - 10mm Length - 25 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 25 Wire Size (AWG): 12 Insulation Color: Grey Ferrule Length: 10mm (0.39 in.) Stripping Length: 12mm (0.47 in.) Quick Guide (pdf)

Read more less

12/3 AWG Triplex Cable - Black/Green/White - 250'12 AWG Triplex boat cable is commonly used for AC circuits in boats and recreational vehicles.  It is an ideal choice when looking at multiconductor boat cables.  Pacer Group manufactures 16 AWG triplex cable in the USA for longevity and easy installation.  How is that accomplished?  It starts with finely stranded tinned copper conductors.  These conductors prevent corrosion and also allow the cable to be flexible.  Another important aspect of triplex boat cable is the insulation.   The PVC insulation is designed specifically for protection from moisture and fatigue.  These conductors also allow the cable to be flexible.  Flexibility is essential when working in enclosed marine spaces.  The PVC insulation is designed for protection from moisture and fatigue.  It is created during the extrusion process.  The extrusion process for this cable fills the voids between the conductors.  This process eliminates any possibility of moisture or air build up in the wires.  To make it even better, talcum powder is coated on the wires.  This is done to allow for the easy removal of the jacket during installation. Features: Stranded, tinned copper Color coded conductors Tough PVC Jacket Highly flexible Easy to strip and route Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.16 Technical Specifications: Conductor - Annealed Fine Stranded Tinned Copper, ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 3 Type of Cable - Triplex  Shape of Jacket - Flat *Sold as an Individual Specifications: Color: Black/Green/White Gauge: 12/3 AWG Length (Feet): 250' Box Dimensions: 9"H x 10"W x 10"L WT: 31.8 lbs UPC: 840248200738 Brochure (pdf)

Read more less

Green 8 AWG Primary Wire - 250'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 8 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 8 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Green Gauge: 8 AWG Length (Feet): 250' Box Dimensions: 6"H x 10"W x 10"L WT: 19.5 lbs UPC: 840248203333 Brochure (pdf)

Read more less

10/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - 250'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 10 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 10 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 10 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold as an Individual Specifications: Color: Red/Yellow Gauge: 10/2 AWG Length (Feet): 250' Box Dimensions: 10"H x 10"W x 10"L WT: 30 lbs UPC: 840248200462 Brochure (pdf)

Read more less

5056100 - Water Resistant ST-Blade Fuse Block with CoverThis Blue Sea fuse block provides water-resistant circuit protection for ATO/ATC fuses and circuit breakers in a compact footprint.  Now with wing screws for toolless access.Features: Water-resistant design with a standard ring or spade-type terminals Allows for simple wiring with standard tools Accepts a wide range of wire sizes Includes 3 wire plugs to maintain a water-resistant rating if less than 4 loads are required Accepts ATO and ATC fast acting blade fuses Accepts ATO/ATC-Style Low Profile Circuit Breakers Nests with other ST-Blade water-resistant fuse blocks and water-resistant 100A busbars to reduce wire 5056100 meets ABYC/USCG insulation requirements Tin-plated copper busses and fuse clips Includes four write-on circuit labels Spare fuse and fastener storage in cover Wing screws designed for tool-free installation of cover to meet ABYC compliance Technical Specifications:Cover - yes Maximum Voltage - 32V DC Bus Material - Tin-plated Copper Mounting Holes - Accepts 1/4" (6mm) screws Terminal Screws - 4 x # 8-32 with captive star lock washer Wire Size - Input - (1) 8 AWG to 4 AWG  Wire Size - Load - (4) 16 AWG to 10 AWG  In the Box: 5056100 Busbar Instruction Manual *Sold as an Individual Quick Guide (pdf)

Read more less

Red 4/0 AWG Battery Cable - 25' Pacer's 4/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 4/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 4/0 AWG Length (Feet): 25' Box Dimensions: 7"H x 10"W x 10"L WT: 20.6 lbs UPC: 840248204507 Brochure (pdf)

Read more less

Red 3/0 AWG Battery Cable - 25' Pacer's 3/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 3/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 3/0 AWG Length (Feet): 25' Box Dimensions: 7"H x 7"W x 7"L WT: 17.05 lbs UPC: 840248204408 Brochure (pdf)

Read more less

VPNB2 MANL 2 Position All-In-One Distribution Block with CoverT-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse.  This hefty little block distributes power from one (1) 1/0-gauge positive power cable to two (2) 4- to 8-gauge power leads, each routed through a mini-ANL fuse. Then, the same block receives the amps' two ground wires and combines them for a single 1/0-gauge ground cable.Fuses sold separately. Features: (2 positive) 1/0 to 4 AWG in to (2 positives) 4/8 AWG out (1 negative) 1/0 to 4 AWG in to (2 negatives) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: Distribution block for both power and ground Plastic cover (attached) 2 Rubber grommets and sleeves on power inputs (installed) 2 Rubber grommets and sleeves on power outputs (installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

VMANL1 Mini-ANL Fuse Holder - 1/0 to 4 AWGT-SPEC'S VMANL 1fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time.  Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.The T-SPEC VMANL1 fuse holder accepts 1/0 to 4 gauge power cables and mini-ANL fuses.Features: Compact fuse holder  Accepts mini-ANL fuses Connects to 1/0 to 8 gauge power cable Black nickel finish Water resistant T20 Torx® screws Gate Lock technology In the Box: One (1) mini-ANL fuse holder Two (2) Threaded end-caps 1/0 and 4 gauge rubber grommets (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Mini Type: Fuse Holders Box Dimensions: 2"H x 4"W x 6"L WT: 0.35 lbs UPC: 086429390700

Read more less

Fuse Strip C20 - 355 AmpFeatures: Fuse Strip C20 355 Amp Specifications: Amperage: 355a Fuse Type: ANL Type: Fuses Box Dimensions: 1"H x 3"W x 6"L WT: 0.1 lbs UPC: 8717372228827

Read more less

Contura II Switch DPST Black - OFF-(ON)Vibration, shock, thermoshock, moisture and salt spray resistantMounts in Blue Sea Systems Contura Water Resistant Panels and Contura Switch Mounting PanelsSpecifications: Action: OFF-(ON) Pole/Throw: DPST - Double Pole/ Single Throw Actuator Color: Black - Contura II Common Applications: Horn or Windshield Wipers Maximum Amperage: 20A @ 12V / 15A @ 24V Amperage Operating Current: 18mA (LED) Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Embedded LEDs: 0 Lighting: LED rated 100,000 hours 1/2 half Seals: Internal and external gasket panel seal Weight: 0.09lb (0.04 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (On)/Off Color: Black Throw/Pole: DPST Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 632085079352

Read more less

12 Volt DC Main + 19 Positions/120 Volt AC Main + 6 PositionsFeatures: 360 AC Panels may be equipped with main breakers up to 100A per pole to suit the application AC and DC panel amperage determined by AC Main and DC Main circuit breakers Modular manufacturing design reduces manufacturing time Interchangeable modular design eliminates custom engineering and metal fabrication Flexible modifications Flexible panel orientation (panels without meters) Specifications: Positions: 6-AC / 19-DC Nominal Voltage: 120V AC / 12V DC Height: 10.75" (273.05mm) Width: 13.63" (346.2mm) Depth: 4.00" (101.6mm) Weight: 12.80lb (5.81kg) Includes:(1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL](1) - 4206 - Basic AC Label Kit - 30 Black Square Labels [LABEL](6) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (AC Branch)(1) - 7414 - A-Series Flat Rocker Circuit Breaker - Double Pole 30A (AC Main)(1) - 8247 - AC Digital Multi-Function Meter with Alarm (AC Meter)(19) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (DC Branch)(1) - 7549 - C-Series Flat Rocker Circuit Breaker - Single Pole 100A (DC Main)(1) - 8248 - DC Digital Multi-Function Meter with Alarm (DC Meter)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: Both Box Dimensions: 9"H x 12"W x 18"L WT: 11.4 lbs UPC: 632085012182 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Fuse Holder C100Fuse holder, type C100 including cover, suitable for fuses of 40 to 500 amp Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 8717372228599 Quick Guide (pdf)

Read more less

Standard Cordsets50Amp 125/250V PowerCord Plus® Cordsets (4-Wire) All Marinco® cordsets are made of the highest quality, marine-grade construction with features you won't find on other power cords: Watertight molded plug and connector for safety and durability Heavy duty, super flexible marine-grade cable (50 amp 6 gauge) All models include a standard threaded ring for hook-up to ordinary threaded inlets Corrosion resistant, nickel plated contacts Power Indicator Light: Boatside connector features a molded-in LED light. When it glows red, you know you have power to the boat. Contour Grip with Thumbprint Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the 12 o'clock position, the blades line up for easy connection. Marinco's Easy Lock™ system: Quickly locks the cord set to the inlet in just 1/8 of a turn. The exclusive locking tabs engage slots built into all Marinco® inlets. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cordset Length: 25' Amperage: 50a Voltage: 125/250v Box Dimensions: 6"H x 17"W x 20"L WT: 23.5 lbs UPC: 093344309823 Quick Guide (pdf)

Read more less

Circuit Breaker Panel PlugBlack plug fits standard toggle circuit breaker holeWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

C-Series Toggle DC Double PolePN: 7269Poles: 2Color: WhiteAmperage: 200AFeatures: Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 200a Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs UPC: 632085072698

Read more less

C-Series Toggle DC Double PolePN: 7270Poles: 3Color: WhiteAmperage: 300AFeatures: Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 250a Box Dimensions: 1"H x 5"W x 5"L WT: 1.4 lbs UPC: 632085072704

Read more less

8065 8/5/3 Position Label Backlight SystemFeatures: Easily installed in Blue Sea Systems circuit breaker panels Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads Backlighting is standard on panels - No kit required Reverse polarity protection built-in Snaps apart for 5 or 3 positions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Green 6 AWG Battery Cable - 25'Pacer's 6 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured the USA to ensure high quality.  Often times, marine applications are in enclosed areas with sharp turns.  Installation can become difficult.  Pacer simplified this process by developing flexible yet tough marine cables.  This 6 AWG marine battery cable is built to handle the harshest conditions.  All our marine cable is made from Type III tinned copper.  The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket.  These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Green Gauge: 6 AWG Length (Feet): 25' Box Dimensions: 3"H x 7"W x 7"L WT: 3.6 lbs UPC: 840248203609 Brochure (pdf)

Read more less

DC Power Connector - ReceptacleBattery Tender® Black Power Connector Receptacle is an onboard receptacle for DC to DC connections. Designed for 12V through 48V two-wire DC applications. The unique silver-plated solid copper alloy electrical contacts and high-impact UV-protected glass-reinforced thermoplastic housing with a lock device provide a positive connection that avoids vibration and water incursion. Come with all stainless-steel hardware. Perfect for battery connections to trolling motors, navigational electronics, or any DC accessory.

Read more less

PowerPlus 36V 18 AMP On-Board Lithium Compatible Battery Charger & MaintainerThe Battery Tender PowerPlus high voltage chargers provide increased power in a compact package.  Designed with a rugged, weather resistant exterior, this line of Battery Tender chargers is designed with Marine and Industrial applications in mind.Stay ChargedThis 18 AMP Charger provides a full charge to your 36V battery series before automatically switching to float mode maintaining proper voltage levels without overcharging. ProtectedRated IP68 weather resistant and shock and vibration resistant; with safety features including spark-proof and reverse charging protection.    Connect and ForgetWith a low maintenance design, our universal vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage space for your convenience    Safe and SecureSpark-proof during lead connection and automatically detects reverse polarity to ensure a correct, locked-in connection before providing power. Charges & MaintainsGolf Carts, RVs, 48 Volt Trolling Motor BatteryBattery CompatibilityAGM, GEL, Lithium, Standard (Sealed or Flooded Lead Acid)Included in the Box: 36V, 18 AMP Battery Charger Mounting Hardware Ring Terminal Cables with 40A Fuse Reach Over 12 Ft Total Reach AC Power Cord Length: 6.5 Ft - 10 AWG DC Output Cord Length: 5 Ft - 10 AWG DC Accessory Length: 1 Ft Specifications: Dimensions: 11.9" x 7.5" x 3.2", 9.3 lbs Output: 36v @ 18 amp Output Current Range: > 10 amps Input: 120v AC @ 50/60hz Warranty: 2 Years Certifications: ETL & CETL FCC, ICES, CEC, DOE IP Rating: IP68  Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 18a Charger Output Voltage: 36v Charging Banks: 1 Portable: No Box Dimensions: 5"H x 11"W x 15"L WT: 10.5 lbs UPC: 734357220131

Read more less

Red 2/0 AWG Battery Cable - 25' Pacer's 2/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 2/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 2/0 AWG Length (Feet): 25' Box Dimensions: 6"H x 7"W x 7"L WT: 13.5 lbs UPC: 840248204316 Brochure (pdf)

Read more less