Orion-TR 12/12-9A (110W) Isolated DC-DC ConverterRemote On/Off TerminalThe remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or for example the engine run/stop switch. All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output CurrentAn unlimited number of units can be connected in parallel.  High Temperature Protected The output current will reduce at high ambient temperatures.  IP43 Protection When installed with the screw terminals oriented downward.  Screw Terminals No special tools are needed for installation.  Input Fuse (not replaceable) On 12 V and 24 V input models only.  Adjustable Output Voltage Not intended for battery charging (consider using an Orion-Tr Smart for battery charging).Specifications: Input Voltage Range: 8-17 V Under Voltage Shut Down: 7 V Under Voltage Restart: 7.5 V Nominal Output Voltage: 12.2 V Output Voltage Adjust Range: 10-15 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 9 A Maximum Output Current (10 S) at Nominal Output Voltage: 12.5 A Short Circuit Output Current: 32 A Cont. Output Power at 25 Degrees C: 110 W Cont. Output Power at 40 Degrees C: 85 W Efficiency: 87 % No Load Input Current (2): < 50 mA  Current Consumption: < 200uA when disabled via its remote port Galvanic Isolation: 200 VDC between input, output, and case Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C) Humidity: Max. 95 % non-condensing DC Connection: Screw terminals Maximum Cable Cross-Section: 6 mm² AWG10 Weight: .42 kg (1 lb) Dimensions (H x W x D): 100 x 113 x 47 mm (4.0 x 4.5 x 1.9 inch) Safety Standards: EN 60950 Immunity Standards: EN 61000-6-3, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 12v Charger Output - Amps: 9a Charger Output Voltage: 12v Box Dimensions: 2"H x 6"W x 9"L WT: 1.05 lbs UPC: 8719076016878 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

2 Position Bus/Base - Only 10mmThis heavy-duty dual stud busbar features two 3/8” studs for high-current connections. It supports large cable lugs and is ideal for linking batteries, power inverters, or distribution panels.The corrosion-resistant construction ensures long-lasting performance in harsh marine or off-road environments. This busbar offers a reliable solution for compact yet powerful electrical layouts where durability and efficiency are critical.Its compact footprint makes it easy to mount in tight spaces, while the high-conductivity design ensures minimal voltage drop across demanding circuits. Built for serious power distribution, it’s a staple for any professional-grade setup.Specifications: Max Voltage: 48V DC Max Amp: 200A Stud Size: 3/8″-16  Mounting Holes: 0.25 Mounting Screw Size: #10, 1/4″ Distance Between Mounting Holes: 1.425″ Installation:Mount with (2) #10, 1/4″ Screws Quick Guide (pdf)

Read more less

Heavy-Duty 4 Stud BusbarBuilt for rugged, high-load environments, this 4-gang heavy-duty stud bus bar handles large cable connections with ease. Ideal for battery systems or inverter setups where durability is critical.The heavy-duty bus bar features corrosion-resistant hardware and a robust design to withstand vibration, moisture, and salt spray.Its solid construction ensures reliable power transfer and minimal voltage drop, making it perfect for demanding marine, RV, and industrial applications where safety and performance matter.Specifications: Current: Rated up to 600 Amp Maximum Voltage: 300v/48v DC Stud Size: 3/8-16 Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 5.26" Brochure (pdf)

Read more less

V8 Series 250 AMP ANL Fuse - 2 PackT-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit.  Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.Features: Nickel plated Status window *Sold as a 2 PackWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 250a Fuse Type: ANL Type: Fuses Box Dimensions: 0"H x 5"W x 7"L WT: 0.1 lbs UPC: 086429272181

Read more less

Terminal FuseColor: Light GreenAmperage: 30A Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected-safe for installation aboard gasoline powered boats Clear window-visual indication of blown condition Must be used with terminal fuse block WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Fuse Type: Terminal Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 632085051754

Read more less

8172LED Indicator LightGreen12/24V DC5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Green Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 632085081720

Read more less

5113 125A Class T Fuse Features: Extremely fast short-circuit response 20,000 Ampere Interrupt Capacity (AIC) UL listed to standard 248-15 DC Tested to UL standard 198L WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Fuses Fuse Type: Class T Amperage: 125a Box Dimensions: 2"H x 4"W x 6"L WT: 0.2 lbs UPC: 632085051136

Read more less

Pro Installer Link Joiner 2-WayThis tin-plated bus bar can be used to link 2 adjacent DC products together.  The rating is 650 Amps, and it can be doubled up if required.  Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system, but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating Bars can be doubled up to increase the rating This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 3.0" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

VMANL1 Mini-ANL Fuse Holder - 1/0 to 4 AWGT-SPEC'S VMANL 1fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time.  Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.The T-SPEC VMANL1 fuse holder accepts 1/0 to 4 gauge power cables and mini-ANL fuses.Features: Compact fuse holder  Accepts mini-ANL fuses Connects to 1/0 to 8 gauge power cable Black nickel finish Water resistant T20 Torx® screws Gate Lock technology In the Box: One (1) mini-ANL fuse holder Two (2) Threaded end-caps 1/0 and 4 gauge rubber grommets (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Mini Type: Fuse Holders Box Dimensions: 2"H x 4"W x 6"L WT: 0.35 lbs UPC: 086429390700

Read more less

CKM12 Keypad with CKM to NMEA 2000® Adapter Cable - 0.2MThe CKM12 is a customizable keypad featuring laser-etched legends and LED function lights for each button. The LEDs also provide diagnostics when fault conditions are detected.With the rugged mechanical packaging (IP69K), the CKM12 can be installed inside or outside the cabin. The low-profile design offers a seamless dashboard look, and it can be mounted either vertically or horizontally.The CKM12 offers significant advantages over traditional electromechanical switches, such as a longer actuation cycle (1,000,000), reduced wiring harness, and reduced installation time. The CKM12 is sold off the shelf in two configurations and includes a CKM to NMEA 2000® Adapter Cable.The CKM12 is sold off the shelf in two configurations of legends. Consult the factory for additional options and minimum quantities for customization.Features: NMEA 2000® CAN Protocol IP69K Front Panel Sealing Protection Configurable Diagnostic Feedback Standard or Custom Etched Legends 1,000,000+ Button Actuation Cycles. Low Current Switching Tactile and Audible Feedback Circle on buttons Applications: The dimmable button switches on the CKM12 are programmable to control any Maretron digital switching loads Can be paired with third-party systems using the NMEA 2000 standard PGN 127501 Binary Status Report This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

ATM Mini Blade Style Mixed Fuse KitTin Plated Zinc Alloy/Injection Molded Nylon.ATM Mini Blade Style Mixed Fuse Kit includes five each of 3A, 5A, 7.5A, 10A, 15A, and 20A fuses. Constructed of injection molded nylon with tin plated connector blades for superior conductivity and improved corrosion resistance.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: Assorted Fuse Type: ATM Mini Type: Fuses Box Dimensions: 2"H x 2"W x 5"L WT: 0.05 lbs UPC: 035514445672

Read more less

Two-Position On-Off Push-Pull Switch - Stamped BrassThis Two Position On-Off Push-Pull Switch features positive actuation with two positions: On-Off (normally Off). Maximum panel thickness: 1”. Constructed of stamped brass. 15A @ 12VDC.Specifications: Volts: 12V Amps: 15 Amps Specifications: Action: ON-OFF Color: Brass Box Dimensions: 2"H x 2"W x 6"L WT: 0.15 lbs UPC: 035514420020

Read more less

MEGA-Fuse 125A/80V Ceramic (Package of 5 Pieces)Victron Energy supplies a range of fuse holders and fuses to suit a wide range of installations, and the MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular pack of ceramic Victron MEGA fuses contains FIVE 125-amp fuses.Specifications: Max Current Rating: 125 amps Max Voltage Rating: 80 volts Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Amperage: 125a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 1"H x 2"W x 3"L WT: 0.2 lbs UPC: 8719076061670 Quick Guide (pdf)

Read more less

PROLITE Series Dolphin Battery Charger - 12V, 25A, 110/220VAC - 3 OutputsDolphin Chargers are known as a yacht-quality product that is professionally designed and manufactured in Europe with the latest components to be more efficient and reliable than the competition. In 2019, Dolphin set out to create this line of small, water-resistant chargers with the same philosophy for the outboard and gasoline boat markets. The PROLITE chargers are smaller, lighter, and more efficient than the competition and boast the latest in connectivity with a standard Bluetooth interface. Features: The Dolphin Connect App (iOS and Android) will allow you to monitor and control your charger from your mobile device Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks 40% smaller and 50% lighter than most competitors Includes 6 ft. AC and DC cables and fusing 25 amp has 3 outputs IP 65 water resistant ISO-certified 8846 for use in gasoline boats Works with any battery technology on the market Will charge from 0 VDC Bluetooth interface Simple installation 92% Super efficient 12V - 25A Specifications: Charger Input - Voltage: 110/220v Charger Output - Amps: 25a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 4"H x 6"W x 16"L WT: 5 lbs UPC: 786142992259 Owner's Manual (pdf)

Read more less

DS-MULTI Cable Seal Plastic - BlackDesigned to provide a quick and easy installation for multiple cables. Supplied with an undrilled seal allowing you to custom-drill holes to match your cable requirements. Designed for multiple cables up to Ø15mm (0.59"), DS-MULTI-P-BLK is perfect for solar panels, lights, and other rooftop electronics. Constructed from high-impact plastic, DS-MULTI-P-BLK is UV- stable and hard-wearing providing a 100% watertight seal no matter the weather. Features: IP68 Waterproof Designed to fit multiple cables up to 15mm (0.59") in diameter UV resistant Supplied with undrilled bungs and made from marine-grade black high-impact plastic No messy sealant on the bung Easy-fit cable routing that cuts down your installation time A guaranteed 100% watertight seal Designed for a range of cable diameters making it ideal for almost every installation Perfect for solar panels, light bars, lights, and other rooftop electronics Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.3 lbs UPC: 5060114798380 Brochure (pdf)

Read more less

DS-H10-BLK Horizontal Cable Seal- Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .24" to .39" (6 - 10 mm)   Height - 1.06" (27 mm) Width - 1.75" (44.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 1.05 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H10-BLK Horizontal Cable Seal- Black *5-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .24" to .39" (6 - 10 mm)   Height - 1.06" (27 mm) Width - 1.75" (44.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Five (5) Pack Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 9"L WT: 1.75 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

Speaker Wire - 16 AWG 328' (100M) Roll The Fusion marine speaker cable range is specifically engineered for use on boats and ensures the best listening experience with your Fusion speakers and subwoofers. The speaker cable was specifically designed for the marine environment with high-quality materials to help protect the cable from the elements.Ideal for connection with your Fusion marine speakers and subwoofers, the speaker cable features tinned copper wiring with parallel conductors for superior performance. The all-copper wire construction ensures the audio signal is transmitted with minimal resistance, delivering a higher-quality audio signal to your onboard speakers and subwoofers.The result is a superior speaker cable that delivers reliable performance in the harsh marine environment, season after season.  Features: Construction: Multistrand:  Tinned Copper Cable with PVC Jacket Temperature Rating:  105 °C (221 °F) dry or 90 °C (194 °F) wet Fire Retardant Rating:  VW-1 Voltage Rating:  600 V max. Oil Resistance:  Yes Warranty:  1 Year WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 328' Gauge: 16 AWG Color: White Box Dimensions: 6"H x 8"W x 8"L WT: 9.7 lbs UPC: 753759261672 Brochure (pdf)

Read more less

Phoenix Inverter 12 VDC - 500W - 120 VAC - 50/60HzInverters allow you to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Waveform: Pure Sine Wave Outlet Qty: 1 Duplex NEMA 5-15R Inverter Cont. Output Wattage: 350w GFCI: No DC Connection Type: Hardwire AC Connection Type: Hardwire Inverter Surge Rating: 900w Inverter Output Voltage: 120v Inverter Input Voltage: 9-17v Box Dimensions: 6"H x 9"W x 14"L WT: 9.55 lbs UPC: 8719076035992 Quick Guide (pdf)Brochure (pdf)

Read more less

Blade Style LED Indicator Fuse Block with Negative Bus Bar - 12 CircuitNickel Plated Copper/Stainless Steel/Injection Molded ABS.Features: Red LED lights indicate when fuse is blown or missing Uses ATO/ATC & ATM fuses 1A-30A Main line terminal rating is 100A 32VDC max, with M5 metric threaded studs Single line terminal rating is 30A 32VDC max, with M4 metric threaded studs Includes semi-transparent cover and 71 labels Terminals are nickel plated copper with stainless steel screws Installs with four #8 FH fasteners (not included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ATO/ATC/ATM Type: Fuse Blocks Box Dimensions: 2"H x 5"W x 8"L WT: 0.65 lbs UPC: 035514446617

Read more less

DS21A-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield. Technical Specifications: Fits cable size (diameter) - .17" to .31" (4 - 9 mm)   Fits connector size up to .83" (21 mm) in diameter  Height - .81" (20.5 mm) Color - Stainless Orientation - Vertical Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 5060114792791 Quick Guide (pdf)Brochure (pdf)

Read more less

3 Position 1 Circuit Push-Pull Switch - Stamped BrassThis Three Position One Circuit Push-Pull Switch features one circuit (normally Off), three position: Off/On/On. Pushed in all the way, the switch is off. Pulled to the first position, the first circuit is activated. In the second position, both the first and second circuits are activated. Ideal for cabin or running lights. Maximum panel thickness: 1”. Constructed of corrosion-resistant stamped brass. 15A @ 12VDC.Specifications: Volts: 12V Amps: 12 Amps Specifications: Action: ON-OFF-ON Box Dimensions: 2"H x 2"W x 6"L WT: 0.2 lbs UPC: 035514420044

Read more less

Orion-Tr 24/12-5 (60W) DC-DCFeatures: High efficiency - Using synchronous rectification, full load efficiency exceeds 95% IP43 protection - When installed with the screw terminals oriented downwards Screw terminals - No special tools are needed for the installation Please contact your dealer for any returns, repairs or support issues related to this product. Owner's Manual (pdf)

Read more less

SmartShunt 300A IP65 Bluetooth Battery MonitorThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are desired. It is equipped with Bluetooth, a VE.Direct port, and a connection that can be used for monitoring a second battery, midpoint monitoring, or a temperature sensor.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

ATM Mini Style Inline LED Fuse Holder - Up to 30AThis Sea-Dog LED inline mini fuse holder is meant for ATM mini-style fuses.Features: LED indicator that lights up when the fuse is blown Designed to accept ATM mini automotive-style spade terminal fuses For use with Sea-Dog ATM Mini Style Fuses 445002-445030 (sold separately). 12 gauge, 6” AWM wire lead Constructed of injection-molded PVC. IP67 waterproof rating Specifications: Max Amps: 30 Fuse Holder Length: 1-9/16 in. Fuse Holder Width: 15/16 in. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ATM Mini Type: Fuse Holders Box Dimensions: 2"H x 2"W x 5"L WT: 0.1 lbs UPC: 035514446495

Read more less

Blade Style LED Indicator Fuse Block with Negative Bus Bar - 6 CircuitNickel Plated Copper/Stainless Steel/Injection Molded ABS.Features: Red LED lights indicate when fuse is blown or missing Uses ATO/ATC & ATM fuses 1A-30A Main line terminal rating is 100A 32VDC max, with M5 metric threaded studs Single line terminal rating is 30A 32VDC max, with M4 metric threaded studs Includes semi-transparent cover and 71 labels Terminals are nickel plated copper with stainless steel screws Installs with four #8 FH fasteners (not included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ATO/ATC/ATM Type: Fuse Blocks Box Dimensions: 2"H x 5"W x 7"L WT: 0.4 lbs UPC: 035514446594

Read more less

Phoenix Smart IP43 Charger 12/50 (1+1) 120-240VAC Requires 5-15P Mains CordWith boat owners in mind, this adaptive 5-step charger can provide either 30A or 50A of charge to each of the three battery banks. Or the Phoenix 1+1 model provides 3A to the starter battery, the rest to the ‘house’ bank. 24V models are available with a 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 120/240v Charger Output - Amps: 50a Charger Output Voltage: 12v Charging Banks: 1+(1) Portable: No Box Dimensions: 6"H x 10"W x 11"L WT: 7 lbs UPC: 8719076053507 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Tinned Copper Battery Cable, 3/0 AWG (81mm²) - Black - 50'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC, and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold (-40 deg F/C), and resists salt water, battery acid, oil, gasoline, heat, abrasion, and ultra-violet radiation. The highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. Specifications: Length (Feet): 50' Gauge: 3/0 AWG Color: Black Box Dimensions: 1"H x 1"W x 11"L WT: 33.75 lbs UPC: 091887118049 Brochure (pdf)

Read more less

Tinned Lug 8 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 8 Stud Size: 3/8” Length: 1.344” Width: 0.609” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 8 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.15 lbs UPC: 840248205955 Brochure (pdf)

Read more less

Black 6 AWG Battery Cable - 250' Pacer's 6 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured the USA to ensure high quality.  Often times, marine applications are in enclosed areas with sharp turns.  Installation can become difficult.  Pacer simplified this process by developing flexible yet tough marine cables.  This 6 AWG marine battery cable is built to handle the harshest conditions.  All our marine cable is made from Type III tinned copper.  The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket.  These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Black Gauge: 6 AWG Length (Feet): 250' Box Dimensions: 7"H x 10"W x 10"L WT: 30.2 lbs UPC: 840248203562 Brochure (pdf)

Read more less

White Triplex Cable - 12/3 AWG - Round - 250'Features: Ancor round triplex cable features white, green and black Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing Ancors proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Features three Marine Grade™ primary conductors (white, black and green) in a white common jacket. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 250' Gauge: 12/3 AWG Color: Black/Green/White Box Dimensions: 11"H x 11"W x 11"L WT: 29.5 lbs UPC: 091887806991

Read more less

Standard Duplex Cable - Flat 10/2 AWG - 2 x 5mm² Red/Black - 400'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Black Length (Feet): 400' Gauge: 10/2 AWG Box Dimensions: 11"H x 11"W x 11"L WT: 45 lbs

Read more less

Yellow 2/0 AWG Tinned Copper Battery Cable - 50'Ancor Marine Grade™ wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. Specifications: Color: Yellow Length (Imperial): 50ft Wire Type: Round Wire Gauge (Imperial): 2/0 AWG WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Yellow Length (Feet): 50' Gauge: 2/0 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 27.4 lbs UPC: 091887968064 Quick Guide (pdf)Brochure (pdf)

Read more less

Double Insulated Stud 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

DTP Deutsch Socket for 14-12 AWG Wire - Size 12 Contact (25 Pack)Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability which are just a few of the reasons that the professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is the fact that they are simple to use and require little time for installation.Features: Easy to install Field serviceable  Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality Characteristics:Hand-insertable contactsCompliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized Specifications: Cavity Style: Plug (socket) Connector Type: DTP Wire Size: 14-12 AWG Current Rating: 25 Package Size: 25 Contact Size: 12 Operating Temperature: -55°C to 125°C Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 1/2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 1/2” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 3"W x 3"L WT: 0.3 lbs UPC: 840248216258 Brochure (pdf)

Read more less

Clear 16/2 AWG Two Conductor Speaker Wire  - 100'Speaker wire is often used with home theaters, digital audio as well as stereo speakers. The speaker wire is not rated for in-wall usage. So, how is it manufactured? Speaker wire is made from finely stranded tinned copper conductors that carry translucent PVC insulation. To make identifying the polarity easy, we added a positive symbol (+) to one of the conductor's insulation. This insulation is designed to be flexible which makes installation easy.How do you use speaker wire? Well, you start by choosing the proper gauge. This can be determined by determining how long the wire will need to be. It's always a good idea to always add a few extra feet to leave room for error. This also keeps the run from becoming too tight. Once you know the length of the wire, you will need to consider the power requirements for your application. After you know the length of your run and the power requirements, you can select the proper gauge wire for your job. If you would like help selecting the proper speaker wire, contact a Pacer expert today.Features:Highly flexible clear insulationCompliances:RoHS Compliant Directive 2002/95/ECCharacteristics: Conductor: Fully annealed finely stranded tinned copper per ASTM B-174 Insulation: Clear PVC Temperature Range: -20 °C to 105 °C Voltage Rating: 90V Applications:Digital Audio, Stereo Speakers, and Home TheatersSpecifications: AWG: 16/2 Length: 100 ft. Conductor Stranding: 26/0.0100 Nom. O.D.: 0.112 x 0.210 Approx LB/M: 25 *Not Rated for In-Wall Use Specifications: Color: Clear Gauge: 16/2 AWG Length (Feet): 100' Box Dimensions: 3"H x 7"W x 7"L WT: 2.75 lbs

Read more less

 Stainless Steel C-Clamp with Neoprene Cushion - 5/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 5/8” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs UPC: 840248216265 Brochure (pdf)

Read more less

Tinned Lug 4/0 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 4/0 Stud Size: 3/8” Length: 2.344” Width: 0.984” Clearance: 0.547” Package Size: 10 Specifications: Gauge: 4/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.9 lbs UPC: 840248205733 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 3/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 3/8” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 4"W x 4"L WT: 0.3 lbs UPC: 840248216241 Brochure (pdf)

Read more less

Black 8 AWG Primary Wire - 250'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 8 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 8 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Black Gauge: 8 AWG Length (Feet): 250' Box Dimensions: 7"H x 10"W x 10"L WT: 19.85 lbs UPC: 840248203272 Brochure (pdf)

Read more less

White 16 AWG Primary Wire - 250' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: White Gauge: 16 AWG Length (Feet): 250' Box Dimensions: 3"H x 7"W x 7"L WT: 4 lbs UPC: 840248201810 Brochure (pdf)

Read more less

White 14 AWG Primary Wire - 100'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 14 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 14 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: White Gauge: 14 AWG Length (Feet): 100' Box Dimensions: 3"H x 5"W x 5"L WT: 2.15 lbs UPC: 840248202299 Brochure (pdf)

Read more less

Yellow 4/0 AWG Battery Cable - 50' Pacer's 4/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 4/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 4/0 AWG Length (Feet): 50' Box Dimensions: 9"H x 12"W x 12"L WT: 44 lbs UPC: 840248204569 Brochure (pdf)

Read more less

White 2 AWG Battery Cable - 100'Pacer's 2 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 2 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: White Gauge: 2 AWG Length (Feet): 100' Box Dimensions: 7"H x 10"W x 10"L WT: 26.35 lbs Brochure (pdf)

Read more less

7701100 ML Solenoid 12V 500A with Deutsch Connector500 Amp magnetic latching (bi-stable) solenoid provides switching under load where manual control is not required.Features: 500 Ampere continuous rating for engine, inverter, house loads, and emergency battery combine Magnetic latching draws no current in "ON" or "OFF" state, only draws current when changing state of switch Silver alloy contacts provides high reliability for switching live loads 3/8" -16 tin-plated copper studs for maximum conductivity and corrosion resistance 7/8" (22mm) stud length accepts multiple cable terminals Label recesses for circuit identification Remote Control Contura Switch included in retail package or sold separately if purchased by OEM in bulk Specifications: Control Circuit Connection: Deutsch DTM Nominal Voltage: 12VDC Manual Control: No Coil Function: Bi-Stable Mounting: #10 Amperage Operating Current Continous: 0A Terminal Stud Torque: 140 in-lb (15.82 Nm) Continuous Rating: 500A Intermittent Rating: 700A (5 min) Cable Size to Meet Ratings: 2x (4/0) Stud Material: Tinned Copper Terminal Ring Diameter Clearance: 1.18" (29.97 mm) Terminal Stud Length: 0.875" (22.23 mm) Terminal Stud Size: 3/8" - 16 (M10) Weight: 1.75lb (0.79 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Fully Insulated Disconnect - Male - 12-10 - 25-PieceAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: 0.250 (6.4 mm) tab size Nylon insulated with insulation grip Double crimp, funnel entry UL 310 Specifications: Gauge: 12-10 AWG Heat Shrink: No Package Qty: 25 Type: Disconnects Box Dimensions: 1"H x 3"W x 5"L WT: 0.15 lbs UPC: 091887214291

Read more less

Heat Shrink Tubing 3/4" x 48" - Yellow - 1 PiecesHeat activated adhesive lining creates a superior water, oil, and acid resistant seal. Most shrink tubing on the market reduces to a 2:1 ratio, Ancor tubing shrinks to 3:1 which allows a wider range of applications for each tubing size. Features: Diameter: 3/4" Shrinks To: 1/4" Color: Yellow Per Package: 1 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 2"H x 2"W x 48"L WT: 0.15 lbs UPC: 091887808568

Read more less