9230Analog Meter Shunt 100A/50mV For use with DC Ammeters For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

24-12-3 DC ConverterConvert 17-32 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features: Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating The heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments Numerous Converter and Load Protection Circuits: Current limiting Automatic thermal shutdown Short circuit proof Reverse polarity Overvoltage protection Carries CE mark Specifications: Input Voltage: 17-32 Output Voltage: 13.6 Output Amps (Intermittent): 3 Output Amps (Continuous): 3 Case Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters) Weight: 1 lb. (.45 kg) Output: 13.6 VDC (internally adjustable 12.6 -14.5)  Ripple: 150 mV P-P maximum Regulation: 1% Line/Load Switching Frequency: 40 kHz Efficiency: 85% – Typical. Isolation: Output/Chassis; Input/chassis: 250 VDC Duty Cycle Ratings*: Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating. Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time Idle Current: Less than 100 mA (including power “ON” light) Operating Temp Specifications: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature Model 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C Mechanical Specifications: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal coated PC board Options:Operation as battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

NP-24 Nav-Pac - 24VMarine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.Features: Prevents voltage “drop-out” during engine start and/or other high intermittent loads such as Thrusters Absorbs line “spikes” Filters out electrical interference Provides supplemental voltage and battery backup for up to 15 min. Optional remote panel (773-5037-0) Specifications: Output: 24 Volt @ 15 amps max. Battery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air. Noise Filtering: Audio through 200 MHZ Voltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds) Back-Up Power: 8A for 15 minutes, 12A for 8 minutes, and 18A for 2 minutes Size: 6.0 x 6.75 x 7.5 inches (13.3 X 17.14 X 19 cm) Weight: 8 lbs. (3.6 kg) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

22-18 AWG - 1/4" Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Ring Terminals Post Size: 1/4" Package Qty: 25 Heat Shrink: No Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 091887212044 Brochure (pdf)

Read more less

Triplex Cable - 12/3 AWG - 100'Features: Ancor Triplex Cable is made to surpass the highest UL Boat Cable standards with ultra flexible (Type 3/Class K) stranding to resist fatigue due to vibration and flexing. Outer jacket is made for easy removal and provides the best abrasion resistance available Ancors proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Features three Marine Grade™ primary conductors (white, black and green) in a white common jacket. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 100' Gauge: 12/3 AWG Color: Black/Green/White Box Dimensions: 5"H x 11"W x 11"L WT: 12 lbs UPC: 091887132045

Read more less

Red 6 AWG Tinned Copper Wire - 250'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.Wire Gauge: 6 AWGWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 250' Gauge: 6 AWG Color: Red Box Dimensions: 10"H x 11"W x 11"L WT: 30 lbs UPC: 091887101225

Read more less

Red 10 AWG Tinned Copper Wire - 250'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.Wire Gauge: 10 AWGWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 250' Gauge: 10 AWG Color: Red Box Dimensions: 5"H x 6"W x 6"L WT: 11 lbs UPC: 091887101058

Read more less

Black 4 AWG Battery Cable - 100'Features: ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Length (Feet): 100' Gauge: 4 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 18.5 lbs UPC: 091887112528 Owner's Manual (pdf)

Read more less

16/3 AWG Triplex Cable - Black/Green/White - 100' 16 AWG Triplex boat cable is commonly used for AC circuits in boats and recreational vehicles.  It is an ideal choice when looking at multiconductor boat cables.  Pacer Group manufactures 16 AWG triplex cable in the USA for longevity and easy installation.  How is that accomplished?  It starts with finely stranded tinned copper conductors.  These conductors prevent corrosion and also allow the cable to be flexible.  Another important aspect of triplex boat cable is the insulation.   The PVC insulation is designed specifically for protection from moisture and fatigue.  These conductors also allow the cable to be flexible.  Flexibility is essential when working in enclosed marine spaces.  The PVC insulation is designed for protection from moisture and fatigue.  It is created during the extrusion process.  The extrusion process for this cable fills the voids between the conductors.  This process eliminates any possibility of moisture or air build up in the wires.  To make it even better, talcum powder is coated on the wires.  This is done to allow for the easy removal of the jacket during installation. Features: Stranded, tinned copper Color coded conductors Tough PVC Jacket Highly flexible Easy to strip and route Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.16 Technical Specifications: Conductor - Annealed Fine Stranded Tinned Copper, ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 3 Type of Cable - Triplex  Shape of Jacket - Flat *Sold as an Individual Specifications: Color: Black/Green/White Gauge: 16/3 AWG Length (Feet): 100' Box Dimensions: 6"H x 7"W x 7"L WT: 7.9 lbs UPC: 840248200578 Brochure (pdf)

Read more less

14/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - 250'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 14 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 14 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 14 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold as an Individual Specifications: Color: Red/Yellow Gauge: 14/2 AWG Length (Feet): 250' Box Dimensions: 7"H x 7"W x 10"L WT: 17.65 lbs UPC: 840248200271 Brochure (pdf)

Read more less

White 4 AWG Battery Cable - 50' Pacer's 4 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 4 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: White Gauge: 4 AWG Length (Feet): 50' Box Dimensions: 4"H x 7"W x 7"L WT: 9.2 lbs Brochure (pdf)

Read more less

Black 2 AWG Battery Cable - 50' Pacer's 2 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible yet tough marine cables. This 2 AWG marine battery cable is built to handle the harshest conditions. All our marine cable is made from Type III tinned copper. The copper resists corrosion and ensures the longevity of the cable.  It is then insulated with a durable and pliable PVC jacket. These things together make it the highest quality marine battery cable available. Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Black Gauge: 2 AWG Length (Feet): 50' Box Dimensions: 7"H x 7"W x 7"L WT: 13.6 lbs UPC: 840248203975 Brochure (pdf)

Read more less

Yellow 4/0 AWG Battery Cable - 50' Pacer's 4/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 4/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 4/0 AWG Length (Feet): 50' Box Dimensions: 9"H x 11"W x 11"L WT: 33 lbs UPC: 840248204569 Brochure (pdf)

Read more less

ChargeMaster Plus 12/75-3 CZone - 3-BankChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into one single device. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges a maximum of three batteries in a fast and safe way and works anywhere in the world.Battery’s Best FriendWith the Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method. Other unique features are: Revival mode: automatically revives even fully depleted batteries. Priority Charge: redirect available power to the lowest battery, for faster charging. Smart Input: charge all three batteries from one single alternator for continuous charging on the go. Global ChargingThe ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, the ChargeMaster Plus is CE, ABYC, UL, SAE, CEC and RCM/C-Tick compliant.System SimplicityNowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of all three outputs in an understandable way. Robust and ergonomic connections save installation time. An integrated VSR eliminates the need for additional components and ensures that the alternators energy is funnelled through to the batteries.Powerful ConnectionsIn modern applications, all components work together, the ChargeMaster Plus supports not only MasterBus but also CZone and NMEA. This enables the charger to communicate with displays, shunts and power systems including communication standards like, FireCan, CANopen and many more. The ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.Features: MasterBus, CZone and NMEA communication Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR Combine Lithium Ion, Gel or AGM, and large or small battery banks on a single battery charger Charges multiple batteries while being underway Extended specifications: offers 20 % more output at 14.4 V and 80 % charging power at 60 °C Safe Charge: quickly recognize the State of Charge for extended battery life Very wide operating range of 80-275 V AC, 35-70 Hz Compact, easy to connect and quick to install Specifications: Nominal Output Voltage: 12V Max Charge Current Per Output: 75A Number of Battery Outlets: 3 (max.) Display/Read-Out: LED Display Total Charge Current: 75A at 14.4V Specifications: Portable: No Charging Banks: 3 Charger Output Voltage: 12v Charger Output - Amps: 75a Charger Input - Voltage: 120/230v Box Dimensions: 7"H x 12"W x 17"L WT: 16.6 lbs UPC: 816882022555 Owner's Manual (pdf)

Read more less

Pro Installer 400A Double Pole Battery Switch - MC10A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options: surface, rear panel, and front panel mounting, plus optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. Same industry standard mounting with On/Off operation. Used where positive and negative supplies must be isolated at the same time. SAFETY NOTE: BEP does not recommend this for switching house and start battery systems at the same time, for safety reasons. You may need to isolate your engine battery in an emergency, but not your house battery which typically powers the communicationsSpecificationsMounting: Surface, Rear or FrontVoltage: 48v DC (for 12-48v systems)Rating: 400 Cont / 600 Inter / 1500 CrankDims: 3.85" x 3.85" x 3.62"Operation: On/OffStud: 4x 10 mm (3.8")WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AFD: No Lockable: No Positions: On/Off Continuous Amperage: 400a Box Dimensions: 4"H x 7"W x 8"L WT: 1.2 lbs UPC: 843687007746 Owner's Manual (pdf)Brochure (pdf)

Read more less

Medium Duty Battery Disconnect SwitchPart #: 9601DPFeatures: Ignition Protected For use with 12, 24 and 32 Volt Marine Electrical Systems Capacity - 250 Amps Continuous & 360 Amps Intermittent When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running Quick Guide (pdf)

Read more less

Terminal FuseColor: Light BlueAmperage: 40A Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected - safe for installation aboard gasoline powered boats Clear window - visual indication of blown condition Must be used with terminal fuse block WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 40a Fuse Type: Terminal Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 632085051761

Read more less

5105 MEGA®/AMG® Fuse - 200AMPFeatures: Most economical fuse for 100-300 Ampere circuit protection For use with Blue Sea Systems' MEGA®/AMG® Fuse Block WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 200a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 632085051051

Read more less

5118 250AMP Class T FuseFeatures: Extremely fast short-circuit response 20,000 Ampere Interrupt Capacity (AIC) UL listed to standard 248-15 DC Tested to UL standard 198L WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 250a Fuse Type: Class T Type: Fuses Box Dimensions: 2"H x 4"W x 6"L WT: 0.3 lbs UPC: 632085051181

Read more less

8076 AC Main +11 Positions Toggle Circuit Breaker Panel - White SwitchesFeatures: Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions Specifications: Positions: 11 Nominal Voltage: 120v AC Height: 7.5" Width: 10.5" Included: (1) 8031 Basic AC Panel Label Set - 30 Labels (12) 8034 LED - 120v AC Green (1) 8066 LED - 120v AC Red (8) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A (Branch) (1) 7238 A-Series White Toggle Circuit Breaker - Double Pole 30A (Main) (1) 8244 AC Micro Voltmeter - 0 to 150v AC (Meter) (1) 8246 AC Micro Ammeter - 0 to 50A w/ Coil (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Max Breaker Quantity: 11 Voltage: 120v Box Dimensions: 5"H x 10"W x 13"L WT: 4.1 lbs UPC: 632085080761 Owner's Manual (pdf)

Read more less

8074 AC Main +8 Positions Toggle Circuit Breaker Panel - White SwitchesFeatures: Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed 9353, 0-150 Volt AC Voltmeter 9630, 0-50 Amp AC Ammeter Maximum panel Amperage - 50 Amperes 1 30A Double Pole Circuit Breaker 5 15A Single Pole Circuit Breakers 120 Volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Max Breaker Quantity: 8 Voltage: 120v Box Dimensions: 5"H x 10"W x 13"L WT: 3.3 lbs UPC: 632085080747 Owner's Manual (pdf)

Read more less

PT-24-8W Battery Charger“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.Features: 24-volt model “Smart” circuitry provides three-stage charging – bulk, absorption, float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current The optional sensor adjusts output voltage based on battery temperature Current limiting prevents damage from overloading Use as a power supply; can power loads without a battery in line Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield Install in conjunction with PT-MCU for additional control and monitoring ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 85 – 264 Input Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4 Power Factor: .98@115V and .93@230V Max Output Amps: 8 Output Banks: 3 Battery Capacity (Amp-Hours): 16 – 80 Operating Temp. Rating Reference: T-1 Case Size Reference: A-1 Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth Weight Lbs./Kg: 8/4 Optional Temp. Sensor Model: TCS-12/24         Remote Panel Model: RP Compliance Reference: CG, CE, ABS Temperature Rating References: Temperature: -10 degrees C to +60 degrees C Derate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load Compliance References: UL: UL 1950 (per DNB report) CG: USCG CFR 183.410 (Ignition protected) EN: EN 60335-1 CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options:Remote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 8a Charger Output Voltage: 24v Charging Banks: 3 Portable: No Box Dimensions: 10"H x 10"W x 16"L WT: 8.3 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Marelube TEF45 30cc SyringeA highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also works well at protecting against rust corrosion and anti-seize applications.

Read more less

Push-Button Switch 12V Latching On/Off - Blue LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005926

Read more less

A-Series Flat Rocker Circuit Breaker - Double Pole - 10AFeatures: Color actuator indicates "OFF" position "Trip Free" design cannot be held "ON" during fault current condition International ON/OFF symbols support vertical or horizontal mounting Specifications: Amperage : 10A AC / 10A DC Actuator Style: Flat Rocker Poles: 2 Maximum Voltage: 120V AC / 240V AC / 32V DC Circuit Breaker Type: Magnetic Hydraulic - trip free Interrupt Capacity: 3000A @ 240V AC / 1500A @ 240V AC[TUV] / 5000A @ 32V DC Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Mounting Screw: #6-32 Stainless Steel Mounting Screw Torque: 6 in-lb (0.68 Nm) Screw Terminal Torque: 14 in-lb (1.58 Nm) Switching Cycles: 10000 Terminal Screw: #10-32 Stainless Steel Weight: 0.38lb (0.17 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 10a Box Dimensions: 2"H x 3"W x 4"L WT: 0.4 lbs UPC: 632085074104

Read more less

Contura II Switch DPDT Black - ON-ONVibration, shock, thermoshock, moisture and salt spray resistantMounts in Blue Sea Systems Contura Water Resistant Panels and Contura Switch Mounting PanelsSpecifications: Action: ON-ON Pole/Throw: DPDT - Double Pole/ Double Throw Actuator Color: Black - Contura II Common Applications: Switching between shunts or current transformers with one meter Maximum Amperage: 20A @ 12V / 15A @ 24V Amperage Operating Current: 18mA (LED) Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Actuator Position to Light LED: ON Embedded LEDs: 2 Lighting: LED rated 100,000 hours 1/2 half Seals: Internal and external gasket panel seal Weight: 0.09lb (0.04 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/On Color: Black Throw/Pole: DPDT Box Dimensions: 2"H x 2"W x 4"L WT: 0.2 lbs UPC: 632085079390

Read more less

50 Amp 125/250 Volt Locking Connector6364CRNFeaturesCorrosion resistant materials 4-Wire connector / 3-blade openings 50 amp 125/250 volt female connector 5 Year WarrantyWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Plugs Box Dimensions: 3"H x 5"W x 9"L WT: 0.7 lbs UPC: 093344006715 Owner's Manual (pdf)

Read more less

1810Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800 - can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

C-Series TogglePN: 7365Poles: 2Color: WhiteAmperage: 30AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips Trip Free design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Box Dimensions: 4"H x 5"W x 5"L WT: 0.7 lbs UPC: 632085073657

Read more less

Single Pole Small Case 2" Flat Rocker Circuit BreakerPN:   7402Amperage:   10 AmpFeatures: Color actuator indicates "OFF" position "Trip Free" design cannot be held "ON" during fault current condition Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 250 Volts AC / 80 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 10a Box Dimensions: 1"H x 3"W x 5"L WT: 1 lbs UPC: 632085074029

Read more less

C-Series Toggle Single PolePN: 7248Poles: 1Color: WhiteAmperage: 80AFeatures: Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 80a Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 632085072483

Read more less

DC Power Connector - PlugBattery Tender® Black DC Power Connector L-Shape Plug - an onboard connector for DC to DC connections. Perfect for battery connections to trolling motors, navigational electronics, or any marine DC accessory. Unique screw and lock device provides a positive connection that avoids vibration and water incursion.Features: Includes L-Shape Plug ONLY.  Please refer to part number 027-0004-KIT for the DC Power Connector.  Designed for 12V through 48V two-wire DC applications. Color: Black Dimensions: Depth: 3.1"- Height: 1.9"- Width: 2.3" Warranty: 2 Year

Read more less

PT-14W Battery ChargerNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless-steel case with a durable white powder coat finish, and the internal circuitry is polyurethane-coated for maximum corrosion resistance.Features: “Smart” circuitry provides three-stage charging – bulk, absorption, float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current. (Except PT-7) The optional sensor adjusts output voltage based on battery temperature. (Except PT-7) Current limiting prevents damage from overloading Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line Built to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 85-264     Input Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4  P.F. Rating: .93@230V and .98@115V Max Output Amps: 14 Output Banks: 3 Battery Capacity (Amp-Hours): 28-140     Operating Temp. Rating Reference: T-2 Case Size Reference: A-2 Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth Weight Lbs./Kg: 8/4 Optional Temp. Sensor Model: TCS-12/24     Remote Panel Model: RP Equalize Option: Yes Output Indicator Reference: M-3 Compliance Reference: CG, CE     Temperature Rating References: Temperature: -10 degrees C to +60 degrees C     Derate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load Compliance References: CG: USCG CFR 183.410 (Ignition protected) CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options:Remote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate the charger output stage. Manual re-initialization of a three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 14a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 11"H x 11"W x 16"L WT: 9.5 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

8664 Contura 2 Bilge Pump Control PanelBlue Sea Systems water resistant 12/24 Volt DC Bilge Pump control panel with Contura rocker switch and fuse holder for fuses up to 20amp Features: Designed for 12 or 24V DC systems   ON - OFF - AUTO Contura Switch Watertight mounting gasket Fuse holders accept commonly available AGC and MDL glass fuses "ON” LED embedded in switch indicates the pump is running Completely wired and ready to install Specifications: Weatherproof - Water Resistant No. of Bilge Pumps - two (2) Nominal Voltage - 12/24V Panel Cumulative Rating - 45A Switch Rating: 20A @ 12V DC / 15A @ 24V DC Dimensions (H x W x D) - 3.75" x 3.34" x 3" In the Box: Panel Mount AGC/MDL Fuse Holder (P/N 5021) x two (2) Contura III Switch SPDT - On - OFF - (ON) (P/N 7944) x two (2) Black 60 Label Set (P/N 8214) *Sold as an Individual  Specifications: Action: on - off - auto Color: Black/Grey Throw/Pole: SPDT Box Dimensions: 5"H x 7"W x 8"L WT: 0.5 lbs UPC: 632085086640 Owner's Manual (pdf)

Read more less

C-Series Flat Rocker Circuit Breaker - Single Pole - 15AFeatures: Rocker actuator is flush in the "ON" position, eliminating the risk of accidential switching Color actuator indicates "OFF" position Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip Ignition protectedsafe for installation aboard gasoline powered boats Specifications: Amperage: 15A AC / 15A DC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 240V AC / 48V DC Circuit Breaker Type: Magnetic Hydraulic - trip free Terminal Stud Torque: 35 in-lb (3.95 Nm) Interrupt Capacity: 3000A @ 120V AC / 3500A @ 240V AC / 5000A @ 32V DC Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Mounting Screw: #6-32 Stainless Steel Mounting Screw Torque: 6 in-lb (0.68 Nm) Switching Cycles: 10000 Terminal Stud: 1/4-20 Tin-Plated Brass Weight: 0.38lb (0.17 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 15a Box Dimensions: 2"H x 3"W x 4"L WT: 0.4 lbs UPC: 632085075422

Read more less

Black Plastic Vertical Cable Seal for Multiple Wires Up to 10.6mm/0.5"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 3"W x 7"L WT: 0.4 lbs UPC: 727908835854 Brochure (pdf)

Read more less

BlueSmart IP65 Charger 24/13 (1) 120V NEMA 1-15P UL ApprovedThe Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and on motor vehicles, such as classic cars, motorbikes, boats, and campervans. The Battery Is Charged, Smartly... To Perfect ConditionThe seven-step charging algorithm gets the most out of a battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and gives it a longer life.Recovery of Deeply-Discharged ‘Dead’ BatteriesUnlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.Connect the Battery with EaseThe charger comes with both crocodile clips and M8 eyelets, making it easy to connect to the battery. If users wish, they can leave it permanently connected.Check the Status of the Battery RemotelyThe Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.Specifications: Input Voltage: 120 VAC Efficiency: 95% Standby Power Consumption: 95% 0.5W  Minimum Battery Voltage: Starts charging from down to 0V Charge Voltage 'Absorption': Normal: 28,8V High: 29,4V Li-ion: 28,4V Charge Voltage 'Float': Normal: 27,6V High: 27,6V Li-ion: 27,0V  Charge Voltage 'Storage': Normal: 26,4V High: 26,4V Li-ion: 27,0V  Charge Current: 5/8A Charge Current in Low Current Mode: 2 / 3A  Temperature Compensation (Lead-Acid Batteries Only): 32 mV/degrees C (18mV/degrees F Can Be Used as Power Supply: Yes Back Curreny Drain: 0.7Ah/month  (1mA)  Protection: Reverse polarity; Output short circuit; Over temperature  Operating Temp. Range: -40 to +60 degrees C (full rated output up to 30 degrees C) -40  to +140 degrees F (full rated output up to 90 degrees F)  Humidity (non-condensing): Max 95% Enclosure Specifications: Battery-Connection: Black and red cable of 1.5 meters (4.9 feet) 120 V Ac-Connection: Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug Protection Category: P65 (splash and dust proof, and ignition protected) Weight: 0,9kg (2lbs) Dimensions (H x W x D): 24/8: 60 x 105 x190mm 2.3 x 4.1x 7.5 inches Standards: Safety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29 Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 13a Charger Output Voltage: 24v Charging Banks: 1 Portable: Yes Box Dimensions: 4"H x 7"W x 16"L WT: 4.8 lbs UPC: 8719076060888 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SPST Lighted Toggle Switch - Red LED - 12V - #6-32 Terminal - ON/OFFSingle pole, single throw toggle switch turns one circuit on and off.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Four #6-32 screw terminals Switch illuminates red when on and is clear when off 15/32" mounting hole, fits panels up to 1/8" thick Same as Cole Hersee part number M-54109 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Clear Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046594

Read more less

SPST Rocker Switch - 12V - ON/OFFSingle pole, single throw switch turns one circuit on and off.Features: Nominal voltage is 12V/24V DC Rated for 20A at12V DC, 10A at 24V DC Two #8-32 screw terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 56027-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: On/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046280

Read more less

200A Z Bar 18 Way Bus BarThis patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

ANL Fuse Holder with 2 Additional Studs, 750AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 2"H x 7"W x 8"L WT: 0.9 lbs UPC: 843687006794 Brochure (pdf)

Read more less

Square Battery Distribution Cluster f/Single Engine w/Two Battery BanksThe 716-SQ-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system. To be used in single outboard dual battery bank or single alternator inboard engine dual battery bank. No more flat start batteries Electronics protection from harmful engine start spikes The 716 cluster is for use on charging systems up to 150A The 716 cluster replaces battery isolator systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Pro Installer Z-Bars are available in (10) way and (18) way 200 Amp Z-Bar models for a variety of onboard applications. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy acces WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Remote Battery Management Cluster f/Twin EngineOffers all features of motorized battery switches and Motorized VSRs in one kit. Makes ordering easy! Clusters are surface mount, and can be rearranged to meet specific needs, such as port and starboard configurations and can be combined with other battery distribution products. Available in single, dual and triple engine configurations.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Pro Installer 400A EZ-Mount Dual Bank Control Battery Switch - MC10Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for the boater, the Dual Bank Control switch features a unique isolated-On position which allows use of house loads and VHF radio if the engine needs to be electrically isolated, or allows the engine to be isolated during servicing while still providing power to house loads (for lighting, stereo, fridge etc). For boats or vehicles with single Engine and House battery bank, Dual Bank Control allows the use of optimized battery banks for their respective loads; an appropriately sized deep cycle bank for House loads, and thin plate starting batteries for the Engine. Further, sensitive electronics are isolated from starter motor induced voltage spikes because House and Engine loads are separated during normal operation, unlike Selector battery switches. As easy as 1, 2, 3, these revolutionary EZ Mount battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze. Tested to UL1107 ignition protection, CE Tinned copper 10mm (3/8 inch) studs Stainless steel washers and nuts Fiber reinforced plastics 400A Continuous / 600A 5 minutes Intermittent / 1500A 10 seconds Cranking (cable size to achieve ratings 120mm}, 4/0, smaller cable size will reduce the Amp rating) Waterproof to IP67 Same interconnection height as Pro Installer Removable knob allows isolation during servicing 3 removable side plates for protection Industry standard 3.85 x 3.85 inch footprint For surface mounting only Each Pro Installer battery switch is fully tested for pressure sealing, rotation force and electrically load tested SpecificationsMounting: Surface OnlyVoltage: 48v DC (for 12-48v systems, both banks must be same voltage)Rating: 400 Cont / 600 Inter / 1500 CrankDims: 3.85" x 3.85" x 3.62"Operation: 1, 1/2, Parallel, OffStud: 4x 10 mm (3.8")WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AFD: No Lockable: No Positions: 1-1/2-Parallel-Off Continuous Amperage: 400a Box Dimensions: 3"H x 7"W x 8"L WT: 1.4 lbs UPC: 843687008583 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Contour Switch Panel - Waterproof 6 WayCSP6 includes 6 switches unfused for installation where a separate fused supply is available.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Max Breaker Quantity: 6 Voltage: 12v Box Dimensions: 4"H x 5"W x 9"L WT: 0.8 lbs UPC: 870216001128

Read more less

19mm Inrush Push Button Switch Momentary Off-(On) - Blue/Red LED - Switch Body OnlyThe 9057 Series 19mm Marine Grade Switch is a compact precision control solution engineered for tight panel layouts and rugged environments. Housed in corrosion-resistant SS316 stainless steel and sealed to an IP69K waterproof rating made possible by Bluewater’s proprietary Deutsch-style connectors, it is built to withstand the demands of marine and outdoor applications.This IP69K waterproof switch is ideal for locations exposed to salt spray, washdowns, and constant environmental stress.This switch provides clear and intuitive feedback with smart LED indicators. It glows soft blue for backlighting and bright red when active, giving you immediate visual confirmation of power status. Rated for 15 amps in single channel or 7.5 amps per channel in dual channel configurations, the 9057 handles high current loads with consistent performance and reliability.Each switch features a fully detachable actuator that is completely customizable to fit your specific needs and style preferences. The built-in backlighting ensures visibility in any lighting condition.Ideal for boat builders, marine technicians, and anyone upgrading electrical systems where space is limited and durability is critical.Specifications: Switch Rating: 15A/12-24VDC Switch Contacts: 1 NO, 1 NC | 2 NO, 2 NC Mechanical Life: 50,000 Cycles Electrical Life: 10,000 Cycles Dimensions: View Dimensional Drawings Material: Nickel Plated Brass/ Stainless Steel LED Color: Blue/Green/Red Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color coded for your safety and convenience). Lastly connect the 2 contacts for the LED. Specifications: Action: Off-(On) Color: Blue/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 810196330771

Read more less

22mm Ring Style Button - Stainless SteelReplacement button for Bluewater 22mm LED Lit Electronic Push Button Switches.

Read more less