5163ANL Fuse750A Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 750a Fuse Type: ANL Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 632085051631

Read more less

Triple XD Flex Relay with KnobsSet of three programmable relays designed for use in 12 or 24 VDC lithium battery systems. Typically the two outer devices would be set up as remote on-off switches and the middle one would be set up as an Automatic Charge Relay. The relay settings are programmable and the list of available options is optimized for lithium batteries.

Read more less

100A Connector for Plug - 125/250VMate with plug on extension cords or adapters. *Note: It does not mate with shore power inlet. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Plugs Box Dimensions: 6"H x 6"W x 15"L WT: 4 lbs UPC: 093344500206

Read more less

Universal Watertight Connector CapFeatures: For use on 16 or 32 AMP products for CE compliance For use on 30 or 50 AMP products to protect the connector when not in use

Read more less

CombiMaster Inverter/Charger - 12/3500-200 Amp - 120VThe CombiMaster inverter/charger provides the most power and charging in the series. The 3500W version comes in 12V and can be paralleled stacked in a single system up to 10.5kW. The 24V models in 3500W and 5000W can create parallel stacked systems up 35kW. The 1500W version delivers 1500W of pure sine wave inverter power and 60 amps multi chemistry battery charging. The 1500W is the smallest form factor in the series. All models provide pure sine wave inverter power and over 60-200 amps multi-chemistry battery charging, plus the intelligent design is NMEA 2K and MasterBus compatible.Specifications: Nominal DC Voltage: 12V (10.2-16V) Continuous Power at 104° F: 3500W Peak Power 30 seconds: 5250W Surge Power 5 seconds: 7000W Parallel Stacking: Yes, Up to 3 Synchronize with Mains/Generator: Yes Output Waveform: Pure Sine

Read more less

Mass 24/50-2Mass battery chargers are designed for the toughest conditions for professional, semi-professional and recreational purposes. Even under the most extreme conditions the products from the Mass series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies that underpin the Mass concept have long been proven in practice. With an MTBF of 180,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply. Powerful selling points: Designed for the most difficult conditions Lightweight, stainless steel, anodized aluminium casing Coating of internal components prevents damage from damp or condensation to ensure a longer lifespan Insensitive to electromagnetic effects from other devices Suitable for every type of battery, also charges entirely empty batteries Delivered as standard with temperature sensor Full power at temperatures of up to 45 ˚C Load capacities from 80 to 1000 Ah or more Stable and ripple free 24 and 48 V power supply, even without batteries The Current Control function prevents the breakdown of fuses when the voltage drops Parallel switching possible using multiple battery chargers Connections in accordance with CE, ABYC A-31 and IEC60945 Certified by RRR, RMRS (does not apply to 24/75 120 V) Certified by DNV GL (only 24/25, 24/50, 24/75, 24/75 (120 V, 24/100 models) Certified by Lloyd (only 24/75, 24/100 models) For professional use: GMDSSProfessional users will benefit from a front display with GMDSS alarm functions GMDSS stands for Global Maritime Distress and Safety System, an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols that is a requirement for the SOLAS (Safety Of Life At Sea) convention and uses DSC and satellite communication.This front display is only available for Mass 24/25-2 DNV, Mass 24/50-2, Mass 24/75, Mass 24/75 (120 V), Mass 24/100 and Mass 24/100-3ph.Charging Lithium Ion batteriesAlthough Lithium Ion batteries are increasingly popular, there can be a lack of clarity when it comes to the charging process. This is not a problem with Mastervolt as the Mastervolt battery chargers communicate directly with the Lithium Ion battery via the integrated MasterBus (or have been adapted to the required charging voltages).MasterBus compatibleMass battery chargers can be easily connected to a MasterBus network with only one cable and one connection. You can also choose central, local or remote monitoring, configuration and control of your system.Made tough by smart design The certified Mass battery chargers are very strong, designed to withstand heavy vibrations and shocks. Their premium quality components meet the highest possible specifications, while the smart and extra robust mounting adds to the professional end result.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

50Amp/125V InletsStainless Steel Power Inlet Marinco® Power InletsEasy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment. Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets. The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance. Interior hardware is marine-grade stainless steel. Rear Enclosure Made of flame-resistant UL94V0 plastic All rear enclosures are glass-filled polyester for strength Integral strain relief complies with ABYC requirements Multiple positions allow for maximum installation flexibility WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Amperage: 50a Voltage: 125v Box Dimensions: 5"H x 6"W x 9"L WT: 1.6 lbs UPC: 093344007439 Quick Guide (pdf)

Read more less

22-18 AWG - #6 Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Ring Terminals Post Size: #6 Package Qty: 25 Heat Shrink: No Box Dimensions: 1"H x 3"W x 4"L WT: 0.08 lbs UPC: 091887212013 Brochure (pdf)

Read more less

22-18 AWG - #8 Nylon Ring Terminal - 100-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Ring Terminals Post Size: #8 Package Qty: 100 Heat Shrink: No Box Dimensions: 1"H x 3"W x 4"L WT: 0.25 lbs UPC: 091887221701 Brochure (pdf)

Read more less

Tinned Battery Terminal - 5/16" Stud - NegativeStud Size:5/16"Product Features: ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned brass, providing for maximum current flow 100% tin plated brass resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Heat Shrink: No Type: Battery Terminals Post Size: 5/16" Package Qty: 1 Box Dimensions: 1"H x 3"W x 4"L WT: 0.27 lbs UPC: 091887800159 Quick Guide (pdf)

Read more less

Tinned Battery Terminal - 5/16" & 3/8" Stud - Positive & Negative Combo PackStud Size:5/16" & 3/8"Product Features: ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned brass, providing for maximum current flow 100% tin plated brass resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Battery Terminals Post Size: 5/16" & 3/8" Package Qty: 2 Heat Shrink: No Box Dimensions: 1"H x 3"W x 4"L WT: 0.57 lbs UPC: 091887263220 Quick Guide (pdf)

Read more less

Features Equipped with covers and sealing collars, for use in wet locations Male Connector: 30A 125V Locking, attaches to dockside receptacle or cordset Female Connector: 2-30A 125V Locking w/ Sealing Collar System, attaches to cordset or boat inlet 5 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 5 lbs UPC: 093344011405 Quick Guide (pdf)Brochure (pdf)

Read more less

1741200 Mini OLED Temperature Monitor - BlueMonitors essential electrical system parameters on a bright, waterproof, daylight readable OLED screen.Features: Compact size enables mounting in any convenient location Reverse polarity protected Mounts in a common 1-1/8 in hole Convenient temperature monitoring Temperatures range from -40°C to 125°C (-40°F to 250°F) Measures in Fahrenheit or Celsius Color: Blue Meter: Temperature Nominal Voltage: 12V DC/24V DC Resolution: 1°F or 1°C Accuracy: +-1.25% Operating Current: 10mA Switching Cycles: 10,000 Weight: 0.30lb (0.14 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

PowerBar Dual BusBar - Two 3/8"-16 StudsProvides compact high-ampere busing with 3/8" terminal studsSpecifications: Maximum Amperage: 200A Maximum Voltage: 48V DC Number of Terminal Studs: 2 Terminal Type: 3/8"-16 Stud Bus Material: Tin-Plated Copper CDA 110/UNS11000 Weight: 0.32lb (0.15 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AC / DC Single Pole Magnetic World Circuit BreakerThe World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.PN:   7299Color:   WhiteAmperage:   8 AmpDelay:   StandardFeatures: The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Single pole Quick Trip models are designed specifically for electronics protection "Trip Free" design cannot be held "ON" during fault current condition Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 277 Volts AC / 65 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 8a Box Dimensions: 1"H x 3"W x 4"L WT: 0.17 lbs UPC: 632085072995

Read more less

Water Resistant Circuit Breaker PanelColor: BlackMount: VerticalPosition: 6 CE Marked Designed for flybridge and open cockpit applications ON-OFF Contura Switches "ON" indicating LEDs embedded in switch Watertight Mounting gasket Push Button circuit breaker with waterproof boot Rated IP66 - withstands water from heavy seas Ignition protected - safe for installation aboard gasoline powered boats WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Max Breaker Quantity: 6 AC/DC: DC Waterproof: Resistant Voltage: 12/24v Box Dimensions: 5"H x 7"W x 12"L WT: 1.4 lbs UPC: 632085083731 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

7053Push Button Thermal with Quick Connect Terminals7A Ideal for 24-hour circuit protection Incorporated into Blue Sea Systems' Waterproof Circuit Breaker panels and main Battery Main Distribution Panels Push to reset operation "Trip Free" design cannot be held "ON" during fault current condition Ignition protected - Safe for installation aboard gasonline powered boats With male quick connect terminals WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 7a Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 632085070533

Read more less

EEL "Y" AdaptersThese adapters are equipped with sealing collars and are for use in wet locations.Boat SideFemale Connector: Attaches to boat inlet or cordset(2)50A-125/250V Locking w/ Sealing Collar SystemDock SideMale Plug: Attaches to dockside receptacle or cordset(1)50A-125/250V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 8.5 lbs UPC: 093344051876 Owner's Manual (pdf)

Read more less

14 Position FCI Busbar 3 Screw 1 PostDesigned for use with FCI connectors, this sealed busbar supports modular, secure electrical connections in harsh environments. It’s ideal for marine, heavy equipment, or mobile installations where vibration and water ingress are concerns.The FCI busbar provides excellent corrosion resistance and maintains stable conductivity even under constant exposure to moisture and salt spray. Its rugged construction minimizes maintenance and ensures long-term reliability.Compact and easy to install, the FCI busbar streamlines wiring while protecting critical power circuits in demanding applications.Specifications: Current Rating: 150A@ 48V DC Number of Positions: Male 14 Positions Wire Gage Range: 20 AWG to 12 AWG Terminal Size: 2.8 mm Housing Material: Polyamide (PA) Sealing Protection: IP68 Temperature Rating of Material: -40°C to+ 125°C Input Connector: Male 54201415 Mate Connector: Female 54201411 Plate: 2mm thick Copper with tin-plated Stud: Stainless Steel 3/8" Base: RETPU Overmolded Mounting Holes (4): 0 0.20" Quick Guide (pdf)

Read more less

Single Circuit On/Off CE Marked Enables a failed House or Start battery bank to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank Simplifies battery switch operation Isolates Start circuit from House circuit Protects electronics from sags and spikes caused by engine cranking Ignition protected - Safe for installation aboard gasoline-powered boats WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

35 Amp Panel Mount Circuit BreakerOur high-amp circuit breakers deliver reliable protection for heavy-duty marine, RV, truck, and bus electrical systems. Available in multiple reset styles, these breakers safeguard auxiliary and accessory circuits with confidence.Features: Configuration: Switchable/Manual reset Voltage Compatibility: Works with 12V, 24V, 32V, and 48V DC systems Durability: Rugged thermoplastic housing with nickel-plated copper components Marine-Grade: Designed to resist corrosion, vibration, and harsh environments Performance: Interrupting Capacity: Up to 3,000A at 14V, 30V, and 48V DC Reliable Protection: Scales performance across the 30A–300A range Trusted in Demanding Applications: From trolling motors to inverters and winches Installation Made Simple: Accepts standard 1/4″ lugs for quick, secure connections Compact design makes integration easy in tight spaces Specifications: Amperage: 35 Box Dimensions: 1"H x 2"W x 3"L WT: 0.2 lbs UPC: 810196330023

Read more less

Cover for 20 Terminal BusbarBluewater Terminal Busbar Cover for terminal block style 20 gang, 150 AMP. Specifications: Type: Covers Box Dimensions: 1"H x 1"W x 9"L WT: 0.1 lbs UPC: 810196330498

Read more less

Freedom X & XC Remote Panel with Bluetooth & 25' Network CableConnect with Bluetooth: View key system information via FREEDOM X app on your smartphone or tablet Configure and monitor important parameters and settings Fault and error codes Compatible with all FREEDOM X, XC, XC PRO models in 120Vac/60Hz or 230Vac/50Hz models Download the FXC Control App on the iOS App Store or Android Google Play Store: Easily monitor system status Monitor alerts Change settings conveniently Compatible With:All FREEDOM X inverters and FREEDOM XC inverter/chargers: 817-1000, 817-2000, 817-2000-21, 817-3000, 817-1050, 817-2080, 818-2010, 818-3010, 806-1212

Read more less

5/16" Dual Stud Busbar Copper LinkThis Dual Stud Busbar features an integrated copper link that connects both studs for continuous conductivity and efficient current distribution. Engineered for high performance, it minimizes resistance while maintaining durability in demanding electrical systems. Ideal for marine and industrial applications where clean, reliable power transfer is essential.This copper busbar connector supports large gauge cable lugs and resists corrosion, even in harsh environments. Its solid construction ensures long-term stability and reduced voltage drop. Whether you’re upgrading battery banks or building out a distribution system, this copper busbar connector delivers rugged efficiency you can count on.Specifications: Max Voltage: 48V DC Max Amp: 200A Stud Size: 3/8″-16 or 5/16″ Mounting Holes: 0.25 Mounting Screw Size: #10, 1/4″ Distance Between Mounting Holes: 1.425″ Installation:Mount with (2) #10, 1/4" Screws Quick Guide (pdf)

Read more less

Off/On Combine Battery Switch without Base - Surface Mount - RedThe Dual Circuit Plus switch builds on the standard dual circuit configuration by adding an emergency parallel function. This allows both circuits to combine instantly in the event of a start battery failure—delivering backup power when you need it most.Smart Power Management Provides secure isolation during normal operation Emergency parallel mode ensures dependable backup starting power Ideal for both marine switch panels and RV electrical systems Durable Marine-Grade Construction Non-corrosive marine-grade metals and reinforced polycarbonate housing Ignition protected for safe use aboard gasoline-powered boats Built to withstand vibration, salt spray, and harsh environments High-Performance Connections 3/8″-16 tin-plated copper studs maximize conductivity and resist corrosion Compatible with both 3/8″ and M10 ring terminals 7/8″ stud length fits multiple cable terminals with ease User-Friendly Design Tactile knob textures make the switch position easy to feel International ON/OFF legends and ICON label set included Versatile mounting options: surface, front panel, or rear panel Why Choose the Dual Circuit Plus Switch?This switch combines isolation, emergency backup, and rugged construction in one unit. Whether upgrading a boat or RV, the Dual Circuit Plus delivers reliable performance and peace of mind on the water or on the road.Specifications: Continuous Rating: 300 Amps DC Intermittent Rating: 450 Amps DC (5 min) Cranking Rating: 675 Amps DC (30 sec) Max Voltage: 32VDC Cable Size: 4/0 AWG Specifications: Continuous Amperage: 300 Positions: 3 Box Dimensions: 4"H x 6"W x 9"L WT: 0.9 lbs UPC: 810196331228 Quick Guide (pdf)

Read more less

On/Off 4 Post Dual Circuit Battery Switch without Base - Panel Mount - RedThis dual circuit battery switch allows you to control two isolated circuits simultaneously with a single action. It’s ideal for applications that require independent power routing, such as separating a house battery and an engine battery, without risk of cross-connection.Ignition-protected and safe for use aboard gasoline-powered boats, this dual circuit battery switch is also well-suited for marine and RV systems. The versatile case design supports surface, front panel, or rear panel mounting.For maximum reliability, it features 3/8″-16 tin-plated copper studs that provide high conductivity and corrosion resistance, accepting both 3/8″ and M10 ring terminals. The 7/8″ stud length allows for secure connection of multiple cable terminals.Durable by design, the switch is constructed from marine-grade, non-corrosive metals and housed in reinforced polycarbonate. Tactile knob textures enable position recognition by feel alone, and the unit includes both international ON/OFF legends and an ICON label set for clear circuit identification.Specifications: Continuous Rating: 300 Amps DC Intermittent Rating: 450 Amps DC (5 min) Cranking Rating: 675 Amps DC (30 sec) Max Voltage: 32VDC Cable Size: 4/0 AWG Specifications: Continuous Amperage: 300 Positions: 3 Box Dimensions: 3"H x 6"W x 9"L WT: 0.75 lbs UPC: 810196331204

Read more less

Bypass Module Jumper Wire with Lugs 6AWG RedA3720 Bypass Module Jumper Wire with Lugs, 6AWG, Red.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

V8 Series 60 AMP Mini-ANL Fuse - 2 PackT-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit.  Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.Features: Nickel plated Status window *Sold as a 2 PackWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 60a Fuse Type: ANL Mini Type: Fuses Box Dimensions: 4"H x 4"W x 7"L WT: 0.5 lbs UPC: 086429272242

Read more less

Floyd Bell Turbo Series AlarmFeatures: Adjustable volume by rotating bezel Tamper resistant front mounting case Threaded attachment ring Fits any 1" round aperture Specs: Maximum Amperage: 10A DC (plug), 15A DC (socket) Maximum Voltage: 24V DC Operating Voltage: 5-30V DC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

DS16-SL Starlink Compatible Cable Seal - BlackThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates sizes from 4-6mm (0.16"-0.24"), and connectors up to Ø16mm (0.63").Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a 100% IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features: IP68 waterproof rated Made from premium marine-grade UV-stable materials Includes 316 stainless steel fixings and a waterproof 3M gasket Captive nuts ensure an easy and reliable repeat installation No messy sealant on bungs Split bungs for ease of installation Install connectors up to Ø30mm (1.18") in diameter Fully customizable with self-drill bung options 3 bungs- 1x blank, 1x 4mm, 1x 6mm Compatible with: Standard (Gen 3) / Standard, Enterprise (Gen 3)/ Enterprise & Mini  Specifications: Material: High Impact Plastic  Height: 19mm (0.75") Color: Black  Diameter of Cable Seal: 39mm (1.18") Diameter of Cable: 4 - 6mm (0.16"-0.24") Bungs: 1 x 4mm (0.16") / 1 x 6mm (0.23") /  1 x Self drill  Compatible with:  Standard (Gen 3) / Standard Enterprise (Gen 3) / Enterprise Mini Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 8"L WT: 0.15 lbs UPC: 5060114799684 Quick Guide (pdf)Brochure (pdf)

Read more less

Off/1/2/Both Battery Switch - Panel Mount - RedDesigned for dual battery setups, this 1/2/Both selector switch gives you full control to route power from Battery 1, Battery 2, both, or neither. It’s ideal for managing power flow, setting up backup systems, and charging multiple battery banks— all from a single, intuitive control point.Ignition-protected and safe for installation aboard gasoline-powered boats, this 1/2/Both switch is perfect for both marine and RV applications. The versatile case design supports surface, front panel, or rear panel mounting.Engineered for performance, it includes 3/8″-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepting both 3/8″ and M10 ring terminals. The 7/8″ stud length allows connection of multiple cable terminals with ease.Built to withstand harsh environments, the switch is made from non-corrosive marine-grade metals and molded in reinforced polycarbonate for added durability. Tactile knob textures let you confirm position by feel alone, and the switch includes both international ON/OFF legends and an ICON label set for quick circuit identification.Specifications: Continuous Rating: 300 Amps DC Intermittent Rating: 500 Amps DC (5 min) Cranking Rating: 900 Amps DC (30 sec) Max Voltage: 32VDC Cable Size: 4/0 AWG Specifications: Continuous Amperage: 300 Positions: 4 Box Dimensions: 3"H x 6"W x 9"L WT: 0.65 lbs UPC: 810196331174 Quick Guide (pdf)

Read more less

On/Off Switch Battery Switch - Panel Mount - RedSimple, reliable, and built for tough environments, this On/Off Battery Switch provides secure control of power to a single circuit. It’s ideal for isolating batteries or equipment when not in use, helping to ensure safety and prevent unwanted battery drain.Ignition-protected and safe for use aboard gasoline-powered boats, this switch is well-suited for both marine and RV applications. The versatile case design allows for surface, front panel, or rear panel mounting.Constructed from all non-corrosive marine-grade metals and molded in reinforced polycarbonate, it delivers long-lasting durability in harsh conditions. Tactile knob textures allow users to confirm switch position by feel, and the included international ON/OFF label and ICON label set make circuit identification easy and intuitive.Specifications: Continuous Rating: 300 Amps DC Intermittent Rating: 500 Amps DC (5 min) Cranking Rating: 900 Amps DC (30 sec) Max Voltage: 40VDC Cable Size: 4/0 AWG Specifications: Continuous Amperage: 300 Lockable: No Positions: 2 Box Dimensions: 3"H x 6"W x 9"L WT: 0.55 lbs UPC: 810196331143 Quick Guide (pdf)Brochure (pdf)

Read more less

Dual Bus 10 Position Busbar 150 AmpThis busbar features dual input studs for flexible routing and higher load balancing, supporting up to 150 amps across 10 positions. It’s built for clean, high-efficiency marine power setups.The Dual Bus configuration allows you to isolate or combine circuits as needed, offering greater control and redundancy in your system.Constructed with corrosion-resistant materials, this Dual Bus solution is ideal for demanding environments like boats, off-grid cabins, or industrial panels where durability and performance are critical.Specifications: Current: Rated up to 150 Amp Stud Size: 5/16"

Read more less

OFF/1/2 Battery Switch - Surface Mount - RedThis 1/2/Off switch offers seamless selection between two power sources, with an Off position for isolation. It’s a reliable solution for switching between primary and secondary batteries in compact or mobile applications, such as boats, RVs, or service vehicles.Ignition-protected and safe for use aboard gasoline-powered boats, the 1/2/Off switch is built for flexibility with a case design that supports surface, front panel, or rear panel mounting. To ensure lasting performance, the switch features 3/8″-16 tin-plated copper studs for strong conductivity and corrosion resistance, compatible with both 3/8″ and M10 ring terminals. A 7/8″ stud length accommodates multiple cable terminals when needed.Constructed from marine-grade, non-corrosive metals and a reinforced polycarbonate housing, it’s made to endure harsh environments. Tactile knob textures allow you to identify the position by feel, and both international ON/OFF legends and an icon label set are included for easy circuit labeling.Specifications: Continuous Rating: 300 Amps DC Intermittent Rating: 500 Amps DC (5 min) Cranking Rating: 900 Amps DC (30 sec) Max Voltage: 32VDC Cable Size: 4/0 AWG Specifications: Continuous Amperage: 300 Positions: 3 Box Dimensions: 4"H x 6"W x 9"L WT: 0.85 lbs UPC: 810196331198 Quick Guide (pdf)

Read more less

14 Position Sealed FCI Molded BusbarGreat For: Reliable Marine Power Distribution, Reducing Wiring Clutter, And Handling 100a To 250a With Secure Connections.Features: Terminals: 5/16" Mounting Holes: 0.175" Distance between Mounting Holes: 4" Take 5/32" Pan Head Machine Screw Sealed IP67 Specifications: Max. Voltage: 48 VDC Current Rating: 150 A

Read more less

Red Cover for 4 Stud Heavy Duty BusbarBluewater red cover for heavy-duty stud busbar, 4 gang.

Read more less

Black Cover for 4 Stud Heavy Duty BusbarBluewater black cover for heavy-duty stud busbar, 4 gang.

Read more less

Auto Charging Relay 12V - 140 AMPThe automatic charging relay (ACR) automatically manages battery charging to ensure maximum efficiency and protect your batteries.Features: Automatic battery management – connects batteries during charging and isolates them when the voltage drops Start Isolation (SI) – protects sensitive electronics during engine cranking by temporarily disconnecting house loads (indicated by a slow-flashing yellow LED) High-output support – compatible with alternators up to 120 A Dual-color LEDs – provide real-time battery status: Fault, Charging, Discharging, Combine, SI, and Override modes Under Voltage Lockout – prevents the relay from closing when battery voltage is too low (9.5V for 12V systems, 19V for 24V systems) Durable design – IP67 waterproof, ignition protected, safe for marine and RV applications Specifications: Continuous Rating: 120 Amps Intermittent Rating: 140 Amps Max Voltage: 48VDC Cable Size: 4/0 AWG Applications: Boats – dual battery systems (starter + house) Sailboats – navigation and lighting batteries Fishing boats – trolling motor and accessory battery protection Specifications: Continuous Amperage: 120 Box Dimensions: 3"H x 6"W x 9"L WT: 0.85 lbs UPC: 810196331235 Quick Guide (pdf)

Read more less

Off/1/2/Both Battery Switch - Surface Mount - RedDesigned for dual battery setups, this 1/2/Both selector switch gives you full control to route power from Battery 1, Battery 2, both, or neither. It’s ideal for managing power flow, setting up backup systems, and charging multiple battery banks— all from a single, intuitive control point.Ignition-protected and safe for installation aboard gasoline-powered boats, this 1/2/Both switch is perfect for both marine and RV applications. The versatile case design supports surface, front panel, or rear panel mounting.Engineered for performance, it includes 3/8″-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepting both 3/8″ and M10 ring terminals. The 7/8″ stud length allows connection of multiple cable terminals with ease.Built to withstand harsh environments, the switch is made from non-corrosive marine-grade metals and molded in reinforced polycarbonate for added durability. Tactile knob textures let you confirm position by feel alone, and the switch includes both international ON/OFF legends and an ICON label set for quick circuit identification.Specifications: Continuous Rating: 300 Amps DC Intermittent Rating: 500 Amps DC (5 min) Cranking Rating: 900 Amps DC (30 sec) Max Voltage: 32VDC Cable Size: 4/0 AWG Specifications: Continuous Amperage: 300 Positions: 4 Box Dimensions: 4"H x 6"W x 9"L WT: 0.85 lbs UPC: 810196331181 Quick Guide (pdf)

Read more less

Dual 4 Gang BusbarOffering two separate 4-gang circuits in one unit, this dual terminal busbar provides flexibility for managing both positive and negative connections or isolating separate zones.Ideal for dual battery or split-load systems, this dual terminal busbar is perfect for streamlined wiring in boats, RVs, and industrial panels.Its compact footprint saves space while maintaining organized, high-capacity power distribution. Built for durability and corrosion resistance, it ensures dependable performance in demanding environments.Specifications: Current: Rated up to 250 Amp Stud Size: 3/8" and 5/16" Brochure (pdf)

Read more less

Cover for Heavy Duty 8 Stud Busbar - BlackBluewater black cover for heavy-duty stud busbar, 8 gang.

Read more less

Common Stud 4 Gang Positive Terminal Busbar with CoverThis 4-gang positive terminal block features a common stud for shared power input. This Positive Terminal Busbar is perfect for distributing power from a single source to multiple outputs, with clear labeling for safe and simple wiring.Built for marine, off-road, or industrial use, the Positive Terminal Busbar provides clean, organized, and corrosion-resistant power routing in compact spaces. Ideal for boats, RVs, and auxiliary systems that demand reliable current distribution.Specifications: Current: Rated up to 250 Amp Stud Size: 3/8" Brochure (pdf)

Read more less

Heavy-Duty 8 Stud BusbarBuilt for serious power distribution, this 8-stud heavy-duty busbar handles high current loads across multiple circuits. With corrosion-resistant studs and a rugged base, it’s ideal for organizing battery connections, inverter links, or grounding points in demanding marine and industrial setups.The heavy-duty busbar design ensures lasting durability and consistent electrical performance even in harsh environments. It is engineered to simplify complex wiring, reduce maintenance, and deliver reliable power where you need it most.Specifications: Current: Rated up to 600 Amp Maximum Voltage: 300v/48v DC Stud Size: 3/8-16 Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 11.13" Brochure (pdf)

Read more less

90 Amp Surface Mount Circuit BreakerOur high-amp circuit breakers deliver reliable protection for heavy-duty marine, RV, truck, and bus electrical systems. Available in multiple reset styles, these breakers safeguard auxiliary and accessory circuits with confidence.Features: Configuration: Switchable/Manual reset Voltage Compatibility: Works with 12V, 24V, 32V, and 48V DC systems Durability: Rugged thermoplastic housing with nickel-plated copper components Marine-Grade: Designed to resist corrosion, vibration, and harsh environments Performance: Interrupting Capacity: Up to 3,000A at 14V, 30V, and 48V DC Reliable Protection: Scales performance across the 30A–300A range Trusted in Demanding Applications: From trolling motors to inverters and winches Installation Made Simple: Accepts standard 1/4″ lugs for quick, secure connections Flexible mounting for both panel mount and surface mount setups Compact design makes integration easy in tight spaces Specifications: Amperage: 90a Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs UPC: 810196330191 Brochure (pdf)

Read more less

110 Amp Surface Mount Circuit BreakerOur high-amp circuit breakers deliver reliable protection for heavy-duty marine, RV, truck, and bus electrical systems. Available in multiple reset styles, these breakers safeguard auxiliary and accessory circuits with confidence.Features: Configuration: Switchable/Manual reset Voltage Compatibility: Works with 12V, 24V, 32V, and 48V DC systems Durability: Rugged thermoplastic housing with nickel-plated copper components Marine-Grade: Designed to resist corrosion, vibration, and harsh environments Performance: Interrupting Capacity: Up to 3,000A at 14V, 30V, and 48V DC Reliable Protection: Scales performance across the 30A–300A range Trusted in Demanding Applications: From trolling motors to inverters and winches Installation Made Simple: Accepts standard 1/4″ lugs for quick, secure connections Flexible mounting for both panel mount and surface mount setups Compact design makes integration easy in tight spaces Specifications: Amperage: 110a Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs UPC: 810196330214 Brochure (pdf)

Read more less

12 Terminal Busbar - 250 AmpBuilt for high-capacity applications, this 12-terminal busbar delivers up to 250 amps of current handling. It’s ideal for distributing power to heavy loads or high-demand circuits in boats, RVs, and off-grid systems.The rugged construction ensures lasting performance in harsh environments, including exposure to moisture, vibration, and salt spray.Designed for clean and organized installations, this 250 amp busbar simplifies complex wiring setups and supports both positive and negative distribution needs with minimal maintenance. This 250 amp busbar is a dependable choice for demanding power systems requiring maximum reliability.Specifications: Current: Rated up to 250 Amp Stud Size: 1/4" Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 8.5" Brochure (pdf)

Read more less

10 Terminal Busbar - 150 AmpWith a 150 amp capacity, this 10-terminal electrical busbar offers efficient power distribution in mid-sized applications. It provides a durable, marine-grade solution for clean circuit organization and grounding.Designed to withstand harsh marine and industrial environments, this 10-terminal electrical busbar features corrosion-resistant materials and heavy-duty terminals to ensure long-lasting performance.Its compact layout makes installation simple while maintaining reliable electrical connections, making it ideal for boats, off-road vehicles, and other demanding systems.Specifications: Current: Rated up to 150 Amp Stud Size: 1/4" Stainless Steel Mounting Holes: 0.21 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 5.25" Brochure (pdf)

Read more less

60 Amp Panel Mount Circuit BreakerOur high-amp circuit breakers deliver reliable protection for heavy-duty marine, RV, truck, and bus electrical systems. Available in multiple reset styles, these breakers safeguard auxiliary and accessory circuits with confidence.Features: Configuration: Switchable/Manual reset Voltage Compatibility: Works with 12V, 24V, 32V, and 48V DC systems Durability: Rugged thermoplastic housing with nickel-plated copper components Marine-Grade: Designed to resist corrosion, vibration, and harsh environments Performance: Interrupting Capacity: Up to 3,000A at 14V, 30V, and 48V DC Reliable Protection: Scales performance across the 30A–300A range Trusted in Demanding Applications: From trolling motors to inverters and winches Installation Made Simple: Accepts standard 1/4″ lugs for quick, secure connections Compact design makes integration easy in tight spaces Specifications: Amperage: 60 Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs UPC: 810196330054

Read more less