Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the water. Features rectangular cups for use with larger outboards.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Motor Flush Ear Muff Outboard motor flushers quickly flush away salt, sand, minerals and contaminates from your lower unit cooling system extending the engine’s service life. Easy to use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups and other maintenance that requires running an outboard engine out of the water.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Original Equipment Quality Replacement Tilt Trim Motor - 2 Wire & 4-Bolt MountReplacement outboard tilt trim motor that will fit Evinrude ETEC 2005-2009 70-90 HP, 2007-2009 115 HP, 2009- 130 HP. Includes TAK247 mounting kit.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: BRP-OMC 5005817 BRP-OMC 5005838 BRP-OMC 5006319 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Suncover for FlushmasterThe Flushmaster Suncover protects your Flushmaster screen from UV damage, ensuring long-lasting performance. Made with UV-resistant plastic and a durable 316 stainless steel hinge, it offers superior protection and easy installation with three mounting holes. Keep your device in top condition for every outing.Protect your Flushmaster from the elements with our custom-fit Suncover. Designed to shield your unit from UV rays, salt spray, and debris, it helps extend the life of your equipment and keeps it looking new. The durable, weather-resistant material ensures your Flushmaster is safeguarded whether you're on the move or docked.Features: Superior UV Protection: Crafted from a premium custom blend of plastic infused with UV additives, the Sun Cover effectively combats sun damage, preserving the integrity, aesthetics, and functionality of your Flushmaster device. Enhanced Durability: The robust construction of the cover offers exceptional resistance to drops and impacts, safeguarding your device during both storage and operation. Marine-Grade Components: The suncover incorporates a 316 stainless steel hinge, renowned for its corrosion resistance. It is built to withstand the demanding marine environment, ensuring long-lasting durability. Upgraded Mounting: Designed with three mounting holes instead of the standard one on the Flushmaster device, this sun cover is sure to make positioning and mounting your device easier than ever. Invest in the Flushmaster Sun Cover to maintain the reliability and longevity of your outboard flushing system, ensuring your equipment remains in peak condition for every voyage.Installation: Remove the mounting bracket from the Flushmaster Place Suncover on Flushmaster Screw the Suncover bracket into the Flushmaster

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 4.37"-4.94" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 4" Hose Outer Diameter (inch): 4.37" to 4.94" Quick Guide (pdf)

Read more less

Zeus 24V 4kW Low Turn On (LTO) Vortec Alternator with Isolated GroundThe ARCO Zeus 24v 4kW LTO alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. This alternator continuously generates over 1.4kW (51 Amps) at just under 1,500 RPM and almost 2.4kW (87 Amps) at 2,000 Alternator RPM. Put in real-world terms, a marine diesel engine idling at 750 RPM with a 2:1 pulley ratio is generating over 1.5kW (55 Amps), and a Mercedes Sprinter at 750 RPM with a 3.21:1 ratio is generating over 2.5kW (91 Amps)!The ARCO Zeus 24v 4kW alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. The newest generation of 24V performance has arrived.Competitor’s 24V alternators utilize a 12V rotor and field current which is less efficient and limits output at all RPMs. ARCO utilizes a native 24V rotor and field current. This results in our 24V alternator running cooler than competitor’s 24V alternators, having a direct impact on the alternator lifespan.Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at cruising speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the high amp alternator cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Proudly made in the U.S.A. Technical Specifications: Voltage - 24v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 15.89lbs/7.2kg Regulation - External Only Finish - (Black) E-coating Cut-In RPM - 1,072 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) at 27.5v - 144 Amps - 3,960 Watts – 5.7Kw PTO Sustained Cruising Output (Hot, 6,000 RPM) at 27.5v - 130 Amps - 3,575 Watts – 5.1Kw PTO Sustained Idle Output (Hot, 3,000 RPM) at 27.5v - 108 Amps - 2,970 Watts – 4.2kW PTO Max Continuous Operating Temperature - 100°C / 212°F Mounting Application:Replaces Mando-type alternators using Vortec/GM pad mounting feet. (Found on many Mercruiser and Volvo Penta 3.0GLM, 3.0GLP, 4.3GXi, 5.7GiL, 5.7GXiL Marine Engines). Quick Guide (pdf)Brochure (pdf)

Read more less

1" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1" / (mm) 25.4 Outer Diameter: (inch) 1.57" / (mm) 25 Working Pressure: (Psi) 80 / (bar) 5.5 Bend Radius: (inch) 1.3" / (mm) 33 Weight: (Lb./50ft.) 30 / (Kg/m) 13.5 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.49 lbs Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/2" - 2") Clamping Range - 10-Pack - SAE Size 24Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 24 Hose Inner Diameter: (inch) 1-5/16" - 1-3/8" Clamping Range: (inch) 1-1/2" - 2" / (mm) 38-50 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

1-1/2" x 50' Coil Type A2 Fuel Fill HoseTrident 1-1/2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features:  This hose is built with the best fuel, fire, and age-resistant formulation  Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also, provides excellent bend-ability Application: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube & Cover: NBR / Neoprene  Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to 100ºC)  Length: 50 ft. (15.24 m) Coil Specifications: Inner Diameter: (inch) 1/2" / (mm) 38 Outer Diameter: (inch) 2 / (mm) 51 Wall: (inch) 0.25 / (mm) 6.4 Working Pressure: (psi) 60 / (mpa) 0.41 Bend Radius: (inch) 5.5" / (mm) 140 *The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved Specifications: ID Diameter (inches): 1-1/2" Length (Feet): 50' Box Dimensions: 6"H x 26"W x 27"L WT: 50 lbs UPC: 704917009056 Quick Guide (pdf)

Read more less

5/16" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the FootTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber.Features:  Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose for distribution, return, vent and transfer For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 250 ft. reel (sold by the foot) Specifications: Inner Diameter: (inch) 5/16" / (mm) 7.92 Outer Diameter: (inch) 0.611 / (mm) 15.5 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 1.75" / (mm) 44.5 Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/16" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.15 lbs Quick Guide (pdf)

Read more less

Alternator Protection Module - 48VThe Balmar APM provides best-in-class surge protection using the latest technology developed for the automotive industry. Protect Alternators From Damaging Effects: Battery switch disconnects Lithium battery BMS disconnects Surges from solenoids, combiners, starters, and other motors. The Balmar APM excels in both short-duration and longer-duration spikes, where other products fail.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle Dual Pulley Regulator & Temp SensorKit Includes: a 60-100-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-100-DV Alternator: 100A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 100A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 10.8 lbs UPC: 676205750738 Brochure (pdf)

Read more less

Offshore Repair Kit 60 Series 12V with Bearings, Brushes, Regulator/RectifierOffshore Repair Kit, 60 Series Alternators, 12VKit Includes: Regulator Brush Holder Assembly Rear Bearing  Regulator Washer  Rectifier Assembly  Rectifier Gasket  Front Bearing  Instruction Sheet This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

60 Series Alternator - Saddle Mount(Dual Foot) - 100A - 12VFeatures: 100A 12V Saddle Mount (Dual Foot) 3.15"  Single Deep Vee Pulley Isolated Ground Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Temp Sensor Battery - 20'Temperature Sensor, Battery - 20' LengthThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Outboard Flushing System - 2 Outlet with Two 12' Hose KitsThe Flushmaster is a portable, marine-grade device designed to automate the flushing process for up to four outboard motors. Powered by (3) AA batteries, it ensures thorough engine cleaning by flushing each motor sequentially before automatically shutting off. With its IP67 waterproof certification, the Flushmaster is built to last, offering a convenient and time-saving solution for outboard maintenance. Select the perfect hose length for your setup and experience hassle-free engine care with just the push of a button.The Flushmaster Outboard Flushing System is a marine-grade, portable device that simplifies the process of flushing single, dual, triple, and even quad outboard motors. Powered by (3) AA batteries, the Flushmaster offers effortless engine maintenance while saving time and water. With just the push of a button, your motors are flushed one at a time, ensuring thorough cleaning and optimal engine performance. Once the flushing is complete, the device automatically shuts off and blocks the water flow, leaving you free to enjoy your day without further attention.Portable - Use it anywhere you have a freshwater supply: Water Spigot Garden Hose PVC Plumbing Choose the appropriate hose length based on your setup and application.With its IP67 Waterproof Certification, the Flushmaster is built to withstand harsh marine conditions, ensuring reliable performance season after season. Say goodbye to the hassle of traditional flushing methods and embrace the simplicity of Flushmaster for a smoother boating experience.What's Included? Flushmaster Device (3) AA Batteries Outlet Hoses Hose Clamps Screwdriver Instructions Manual and Warranty Product Installation: Install the included (3) AA batteries Install the outlet hose(s) to the Flushmaster device Connect the Flushmaster device to a water source Attach the outlet hose(s) to your boat motor(s) Press START to begin the automated flushing process Product Compatibility:The Flushmaster is compatible with four-stroke outboards and flush ports. Ensure you select the optimal hose length to accommodate your application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Outboard Flushing System - 2 Outlet with Two 5' Hose KitsThe Flushmaster is a portable, marine-grade device designed to automate the flushing process for up to four outboard motors. Powered by (3) AA batteries, it ensures thorough engine cleaning by flushing each motor sequentially before automatically shutting off. With its IP67 waterproof certification, the Flushmaster is built to last, offering a convenient and time-saving solution for outboard maintenance. Select the perfect hose length for your setup and experience hassle-free engine care with just the push of a button.The Flushmaster Outboard Flushing System is a marine-grade, portable device that simplifies the process of flushing single, dual, triple, and even quad outboard motors. Powered by (3) AA batteries, the Flushmaster offers effortless engine maintenance while saving time and water. With just the push of a button, your motors are flushed one at a time, ensuring thorough cleaning and optimal engine performance. Once the flushing is complete, the device automatically shuts off and blocks the water flow, leaving you free to enjoy your day without further attention.Portable - Use it anywhere you have a freshwater supply: Water Spigot Garden Hose PVC Plumbing Choose the appropriate hose length based on your setup and application.With its IP67 Waterproof Certification, the Flushmaster is built to withstand harsh marine conditions, ensuring reliable performance season after season. Say goodbye to the hassle of traditional flushing methods and embrace the simplicity of Flushmaster for a smoother boating experience.What's Included? Flushmaster Device (3) AA Batteries Outlet Hoses Hose Clamps Screwdriver Instructions Manual and Warranty Product Installation: Install the included (3) AA batteries Install the outlet hose(s) to the Flushmaster device Connect the Flushmaster device to a water source Attach the outlet hose(s) to your boat motor(s) Press START to begin the automated flushing process Product Compatibility:The Flushmaster is compatible with four-stroke outboards and flush ports. Ensure you select the optimal hose length to accommodate your application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Flush Port Quick Connect for Yamaha OutboardsStop screwing around. Flush Port Quick Connects for Yamaha outboards provide a simple, secure solution for efficient engine flushing. Designed as a permanent replacement for the OEM flush port, they ensure leak-free performance and easy installation.Upgrade Your Yamaha Outboard with Our Flush Port Quick Connect.Enhance the performance and longevity of your Yamaha outboard with our Flush Port Quick Connect. Designed to permanently replace the OE connector, our quick connects are crafted from marine-grade materials, ensuring durability and a secure, leak-free connection. Featuring an extended tip with double O-rings and a corrosion-resistant 316 stainless steel spring.Enjoy the ultimate convenience with our easy-to-install, reliable Flush Port Quick Connect for Yamaha outboards. Engineered for outboards with a flush port connection from 150 to 425 hp, this solution simplifies the flushing process and ensures optimal engine maintenance every time.Features: Permanent OE replacement for seamless integration Marine-grade construction for maximum durability Leak-free performance with double O-rings 316 stainless steel spring that resists rust and seizing Compatible with Yamaha outboards from 150- 425 hp with flush port connection What's Included? (2) Female Quick Connects - black (1) Male Quick Connect (Double O-Ring to ensure no leaks) Product Installation: Unthread your Yamaha flush port. Thread in your new Flushmaster female quick connect on the male side. Take your new Flushmaster male quick-connect piece and thread it into the female side of the Yamaha flush port. Attach the second Flushmaster female quick connect to the end of your water supply. Compatible With:Yamaha Outboard Engines 150 - 425 hp (with a flush port)NOT Compatible with: Any 2024 or 2025 engines that are 115 hp or smaller Yamaha Outboards 50 - 115 hp or 450 hp Upgrade to the best in outboard maintenance with the Flush Port Quick Connect for Yamaha today!WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

5/8" Type A2 Fuel & Vent Line Hose - Black - Sold by the FootTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.Features: Sold by the foot Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Applications: Fuel Hose for vent and diesel distribution  For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 5/8" / (mm) 15.9 Outer Diameter: (inch) 0.960 / (mm) 24.4 Burst Pressure: (psi) 200 / (mpa) 1.38 Working Pressure: (psi) 50 / (mpa) 0.34 Bend Radius: (inch) 3" / (mm) 76.2 Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72 *The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/8" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 1"L WT: 0.27 lbs Quick Guide (pdf)

Read more less

Universal Fuel/Water Separator Kit with BracketKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines.Features: 10 Micron Filter and bracket included Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports Double seal for enhanced performance Replaces Mercury 35-60494A4 Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Yamaha Outboard Starter - 2003-2009Replacement outboard starter that will fit 200-250HP 2003-2009.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces: YAMAHA Outboard Starter 60X-81800-01-00 YAMAHA Outboard Starter 60X-81800-00-00 YAMAHA Outboard Starter 60V-81800-00-00 SIERRA Outboard Starter 18-6832 HITACHI Outboard Starter S114-863 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features: Johnson, Evinrude, and OMC fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)

Read more less

Premium Replacement Outboard Alternator - Verado 12V 70AReplacement alternator that will fit all Mercury Verado Outboards, 12 Volt, 70 AMP, internal fan, multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:DELCO Alternator 19020618MERCURY Alternator 892940TMERCURY Alternator 892940T01MERCURY Alternator 892940T02SIERRA Alternator 18-5929This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 70A Voltage: 12v Box Dimensions: 8"H x 8"W x 9"L WT: 9.7 lbs UPC: 693006010533 Quick Guide (pdf)

Read more less

High-Performance Inboard Starter with Gear Reduction & Permanent Magnet - Clockwise RotationThe inboard starter includes a wiring harness to replace the conventional starter.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid.  And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP/ OMC 981821BRP/ OMC 987969MERCURY 50-56886PLEASURECRAFT RA122001VOLVO 835635-4VOLVO 841066-4SIERRA 18-5903SIERRA 18-5914SIERRA 18-5923WILL ALSO REPLACE ARCO 70100 AND 70110This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Flush Port Quick Connect for Mercury OutboardsThe Flush Port Quick Connect for Mercury outboards makes flushing your Mercury outboards easier, faster, and more securely. Designed to replace factory flush ports, this kit installs in minutes and gives you a permanent, leak-free connection built to withstand the toughest marine environments.Crafted from durable, corrosion-resistant materials, including 316 stainless steel and high-grade polymers, the Flush Port Quick Connect is built for life around saltwater. With the included 90-degree elbow fitting, you’ll avoid hose kinks and ensure maximum water flow for a more complete, effective flush every time.Whether you're flushing with your Flushmaster system or a standard water hose, this upgrade means no more stripped threads, no more frustration, and no more excuses — just a faster, easier way to protect your engine and extend its life.NOTE: The opening at the top of the Mercury Quick Connect cap serves as an indicator of check valve failure and is required by the OEMFeatures: Replaces OEM Flush Port Marine-Grade & 316 SS Construction Leak-Free Performance Easy To Install Hassle-Free and Saves Time What's Included? (1) Mercury Male Quick Connect (1) Female Hose Quick Connect (Black) (1) 90-degree Elbow (goes inside the cowling to ensure no kinks are in the Mercury flush hose; use if necessary) (1) Wrench for Tightening (1) Stainless Steel Hose Clamp Product Installation: Remove the OEM Mercury flush port plug. Unscrew the Mercury OEM plug from the 3/4" female hose outlet. Remove the lanyard from the engine hose. Thread your new Flushmaster Flush Port Quick Connect to the flush port. Reinstall the Flushmaster Flush Port Quick Connect into the engine cowling. Give it a 1/4" turn clockwise to lock it in place. Helpful Tip: Remove the cowling and inspect the flush hose for any kinks. If a kink exists, replace the Mercury 3/4" female hose outlet with the provided elbow. Orient the elbow inside the cowling to ensure no kinks are in the Mercury flush hose. (To help insert the 90-degree elbow, lube the barb or use a heat gun on the flush hose.)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Pulley Kit for Yanmar 2GM20-F, 3GM30-F, 3GM-FAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 3GM30-F, 3GM-FKit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 40″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote: If you specify an AT-200A Alternator, a longer belt length may be required.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 170 AMP Kit 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp SensorKit Includes: XT-DF-170-K6 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 170A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-MC-165-KIT, AT-DF-165-K6-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 170A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 17.5 lbs UPC: 676205503594 Brochure (pdf)

Read more less

Alternator Protection Module APM24 - 24VAlternators can be subjected to voltage spikes caused by lithium battery shutdowns, intermittent connections, and other over-voltage events.  Balmar has introduced a robust Alternator Protection Module which helps to protect the alternator’s diodes and internal voltage regulator against spikes (clamping up to 60V) and sustained over-voltage conditions (beginning around 20V for the 12V version).  The APM can absorb multiple surges of such energy and can absorb surges in excess of 200 amps without failure to continually protect your alternator.  Visual and audible alarms indicate if the device has been compromised and needs replacement.Balmar APM devices provide intelligent, robust, solid-state protection in a small easily mounted package at the rear of the alternator between the B+ and B- terminals.  Balmar APM devices can be used to protect all alternator brands.  Balmar APM devices meet ISO 16750-2 for Load Dump Protection and ISO 7637-2 for Surge Protection.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pulley Kit for Yanmar 4JH2-TE, 4JH2-HTE, 4JH2-DTE 4JH2-UTEAltMount®Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 4JH2-TE -HTE -DTE -UTEKit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 47″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote: If you specify an AT-200A Alternator, a longer belt length may be required.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 250 AMP 12V 3.15" Dual Foot Saddle J10 PulleyAlternator, XT Series, 250A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-200-12-IG, AT-DF-200-J10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 250A Voltage: 12v Box Dimensions: 9"H x 10"W x 10"L WT: 16.25 lbs UPC: 676205502269 Brochure (pdf)

Read more less

Alternator 120 AMP 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp SensorKit Includes: a 60-120-K6 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-120-DV Alternator: 120A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-120-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Belt Buddy w/o Adjustment ArmUniversal Belt Buddy Mechanism;  for use with exising adjustment armsDoes not come with the Balmar Universal Adjustment Arm (UAA).Caution:  This approach sacrifices some “travel” in the existing adjustment arm so the BBU mechanism can be anchored to the arm.  Make certain your alternator mounting does not need this travel before purchasing the BBU.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Compact Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features: This is a single pack that contains two Compact Carbon Canisters Brackets OEM Installed Low permeation shell reduces overall system emissions Can be mounted in any orientation using brackets provided EPA / CARB Certified Fits a 5/8" vent hose Specifications:  Trailerable Vessel Capacity (EPA Rating): 70 Gallon Non-Trailerable Vessel Capacity (EPA Rating): 110 Gallon Trailerable Vessel Capacity (CARB Rating): 56 Gallon Non-Trailerable Vessel Capacity (CARB Rating): 110 Gallon  *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Outboard Fuel Filter - UniversalDisposable high-flow in-line fuel filters work with most outboard motors. Protects carbureted engines by trapping pollutants. A clear body allows visual inspection.Features: A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions Universal In-Line Fuel Filter, for 1/4", 5/16", 3/8 inch fuel lines *Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)

Read more less

Fuel/Water SeparatorKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.Features: Double seal for enhanced performance Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872 Quick Guide (pdf)

Read more less

BoatBuckle Gas Tank Tie-DownThe Battery Box Tie-Down features a nylon buckle, while the Gas TankTie-down features a zinc coated steel buckle.Both made of durable 1.5"polypropylene webbing and are packed with two polypropylene footmen loopsand four stainless steel screws,for permanent floor mounting.Product Info: Item No.: F05352 Dimensions: 1.5" x 6' UOM: Each Color: Black Package: Clam Specifications: Lockable: Yes Box Dimensions: 1"H x 4"W x 6"L WT: 0.2 lbs UPC: 079111053526

Read more less

1-1/2" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38 Outer Diameter: (inch) 1.97 / (mm) .05 Working Pressure: (Psi) 60 / (bar) 4.1 Bend Radius: (inch) 4.0" / (mm) 102 Weight: (Lb./50ft.) 45 / (Kg/m) .518 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/2" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.9 lbs Quick Guide (pdf)

Read more less

3/4" Engine Flush Kit & AdaptorThe ConceptA simple quarter-turn quick-release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify winterization and cooling system flushing.In an EmergencyWhile the connected engine is running, close the seacock and remove the quick-release plug. Excess bilge water will be pumped overboard by the engine's raw water pump. Add GROCO BSA to pump out remote bilge locations.For WinterizationClose the seacock, remove the quick-release plug, and insert the service adaptor (included). Anti-freeze can be pumped into the cooling system.For System FlushingClose the seacock and insert the service adaptor. Dockside water can be used to flush the cooling system with the engine running at idle speed.Features:Bronze service adaptorSpecifications: Hose ID (in): 3/4" Thread NPT: 3/4" Overall Length: 3.9" *Add a GROCO Bilge Strainer to pump out remote bilge locations

Read more less

Premium Replacement Outboard Starter for Yamaha 150-300HP - 9 ToothReplacement outboard starter that will fit Yamaha 150HP, 175HP, 200HP, 225HP, 250HP, 300HP 4-Stroke.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces: HITACHI Outboard Starter S114-952C YAMAHA Outboard Starter 6CB-81800-01-00 YAMAHA Outboard Starter 6CB-81800-00-00 YAMAHA Outboard Starter 6EM-81800-01-00 YAMAHA Outboard Starter 6EM-81800-00-00 SIERRA Outboard Starter 18-6961 SIERRA Outboard Starter 18-6963 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Zeus A275L 3.15 Alternator with Isolated Ground & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the A275L cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models available with internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application:Replaces most small case styles using a 3.15" saddle style mount (e.g., Hitachi, Lucas, Mitsubishi). Most Yanmars. Requires Standard single "V" belt upgrading to a Serpentine System Quick Guide (pdf)Brochure (pdf)

Read more less

Zeus A275L 3.15 Alternator with Case Ground (Common Rail) & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the A275L cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models available with internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application:Must be used on Yanmar Common Rail introduced after 2013 (JH-CR, 3JH40, 4JH45, 4JH57, 4JH80, 4JH110) Quick Guide (pdf)Brochure (pdf)

Read more less

360® Marine™ - 10ozCLEANS THE FUEL SYSTEM TO IMPROVE PERFORMANCESTA-BIL 360® MARINE™ use it with every fill up to help keep your engine running cleaner, leaner, smoother and stronger than ever.USAGE DIRECTIONS:1oz treats up to 10 gallons (38 liters) of fuel.  Product does not contain alcohol. Perfect for use in all boats, jet skies, and other watersport engines.5-IN-1 MAXIMIZER HELPS TAKE PERFORMANCE OVER THE TOP PREVENT ETHANOL DAMAGE: Protect your entire fuel system against damaging rust and corrosion caused by moisture and ethanol fuels. Provides a protective coating on ALL the metal parts of the entire fuel system and combustion chamber, even when the engine is not running. INCREASE POWER: Strip away carbon buildup, gum and varnish that can inhibit engine performance, and get the most out of your fuel by burning it more completely. Bring back the power your engine once knew. Clear and prevent harmful gum, varnish and buildup throughout the combustion chamber and injectors. MAXIMIZE FUEL ECONOMY: Burn fuel more completely and efficiently by preserving the fuel system and engine. Features: America’s #1 Ethanol Treatment Use for storage or use at every fill-up and keep marine fuel fresh for up to 12 months Effective in Non-Ethanol marine fuels Cleans the fuel system to improve performance Increases power and fuel efficiency in marine fuel systems & engines Use in your boat, jet ski, or any water sport engines Ultimate treatment and protection formula for ethanol and condensation Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 2"H x 3"W x 9"L WT: 0.65 lbs UPC: 073905222419

Read more less

Yanmar Pulley Kit for 4JH, 4JHE, -TE, -HTE, -DTEAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 4JH, 4JHE, -TE, -HTE, -DTEKit Includes:  Three Ten-Groove (J10) Pulleys Two J10 47″ Circumference Serpentine Belts (one spare) Mounting Hardware Note: If you specify an AT-200A Alternator, a longer belt length may be required.  Call Balmar Technical Support @ +1 (360) 435-6100 x3This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle Single Vee Pulley Regulator & Temp SensorKit Includes: a 60-100-SV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-100-SV Alternator: 100A, 12V, Saddle Mount (Dual Foot), 3.15in, Single Deep Vee Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Alternator 250 AMP Kit 12V 4" Dual Foot Saddle Dual Vee Pulley Regulator & Temp SensorKit Includes: XT-DF4-250-DV Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 250A, 12V, Saddle Mount (Dual Foot), 4in, Deep Dual Vee Pulley, Case Ground4" J-180-Style Mounting;  Typical for Caterpillar, Cummins, Detroit Diesel & John Deere EnginesReplaces: AT-DF4-MC-200-KIT, AT-DF4-200-DV-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 250A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 20.45 lbs UPC: 676205502801 Brochure (pdf)

Read more less

Max Charge MC618 Multi-Stage Regulator without Harness - 12VBalmar's MC-618 Regulator communicates with the SG200 Battery Monitor to provide information to the SG200 Color Display and Smartphone App.  Now you can see how the MC-618 Regulator is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth Smartphone App.  Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App, or the traditional on-regulator programming tool.  Advanced Programming functions are available from the Bluetooth Smartphone App.  Balmar customers have been asking for years to view regulator information from outside the engine compartment.  Balmar has accomplished this goal without the need for a separate dedicated display device!This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Signal Stabilizer for TachometerFor use with AT-Series Alternators when the Tachometer does not provide 3-pole alternator output recognition.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Pulley Kit for Yanmar 3JH5, 3JH4-E, 4JH4-E, 4JH5, 4JH5-EAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 3JH5, 3JH4-E, 4JH4-E, 4JH5Kit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 44.5″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote:  If you specify an AT-200A Alternator, a longer belt length may be required.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less