Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features: It is intended for use with a 5/16-inch interior diameter hose Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour) Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified Specifications: ID Diameter (inches): 5/16" Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs UPC: 022697935168 Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Solenoid for BRP-OMC & Evinrude E-TECReplacement solenoid that will fit BRP-OMC, EVINRUDE E-TEC, 2010-UP 15 HP-300 HP.Replaces:BRP-OMC 587020*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Premium Replacement Tilt Trim Motor for Late Model Mercruisers with Oildyne PumpReplacement outboard tilt trim motor that will fit late model Mercruiser w/Oildyne pump, Ring Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: MERCURY 14336A6 MERCURY 14336A8 MERCURY 14336A9 MERCURY 14336A12 MERCURY 14336A15 MERCURY 14336A17 MERCURY 14336A20 MERCURY 14336A25 MERCURY 14336A31 MERCURY 865380A03 MERCURY 865380A13 MERCURY 88183A5 MERCURY 88183A6 MERCURY 88183A8 MERCURY 88183A11 MERCURY 88183A12 MERCURY 88183A13 MERCURY 88183A25 SERRA 18-6769 / 18-6769-1 SIERRA 18-6813 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Honda/Suzuki - 4 Bolt MountQuality Assurance: Epoxy Powder coated for maximum corrosion protection Motor shafts induction case hardened at bearing surfaces for superior wear resistance Precision Testing: All armatures tested to withstand 50 times operation voltage (12V) All motors performance tested at 5 different load levels All motors must meet or exceed OEM performance before being boxed  Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Fits:  HONDA 2002-Up BF175, BF200, BF225, 4-bolt mount, Round Plug-In Connector. Includes O-ring. SUZUKI 2002 and up 175, 200 & 225hp 4 Stroke Replaces Part Numbers:  HONDA Tilt Trim Motor 36120-ZY3-013 SUZUKI Tilt Trim Motor DF140TLK2 SUZUKI Tilt Trim Motor DF140TXK2 SUZUKI Tilt Trim Motor DF140TXZK2 SUZUKI Tilt Trim Motor DT150TCXK2 SUZUKI Tilt Trim Motor DT225TCXGK2 SUZUKI Tilt Trim Motor DT225TCXK2 SIERRA Tilt Trim Motor 18-6742 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Mercury Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Solid machined brass for dependable performance, peace of mind Quick-connect ¼-inch male thread makes installation easy Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel 1/4" NPT (National Pipe Thread) Specifically designed for Mercury/Mariner Brand engines and tanks *Specifically mates to Attwood part number: 8890LP6 Quick Guide (pdf)

Read more less

Marine Fuel Pump for Mercury Low Pressure 4.3 LH, LX, LXHFuel Pump Assembly for Mercruiser engines: MCM 262 Mag EFI, 4.3L/LX & 4.3LH/LXHEngine Brand:MercruiserFitment: MCM 262 Mag EFI, 4.3L/LX & 4.3LH/LXH

Read more less

Tune-Up Kit for Mercruiser In-Line 4 Delco EST IgnitionsTune-Up Kit for Mercruiser In-line 4 Delco EST Ignitions. Brochure (pdf)

Read more less

Ignition Module for Mercruiser Engines: 4 Cyl., V-6 & V-8 Engines with Delco HEI IgnitionIgnition Module for Mercruiser Engines: 4 Cylinder, V-6 & V-8 Engines with Delco HEI Ignition.Engine Brand:Mercury / MercruiserFitment:GM 4 Cyl., V-6 & V-8 Engines with Delco HEI Ignition Brochure (pdf)

Read more less

Rotor for Mercruiser Engines: GM V-6 Engines with Thunderbolt IV & V HEI IgnitionRotor for Mercruiser Engines: GM V-6 Engines with Thunderbolt IV & V HEI Ignition.Engine Brand: Mercury / Mercruiser OMC Fitment:GM V-6 Engines with Thunderbolt IV & V HEI Ignition Brochure (pdf)

Read more less

Distributor Cap for GM V8 Engines with Thunderbolt IV & V HEI IgnitionsDistributor Cap for GM V8 Engines with Thunderbolt IV & V HEI Ignitions.Engine Brand: Mercury / Mercruiser OMC Fitment:GM V-8 Engines with Thunderbolt IV & V HEI Ignitions Brochure (pdf)

Read more less

Tune-Up Kit for Delco In-Line 4 - Single PointTune-Up Kit for Delco In-Line 4 - Single Point. Brochure (pdf)

Read more less

Temperature Sensor for Mercruiser & Volvo Penta EnginesTemperature Sensor for Mercruiser and Volvo Penta Engines.Engine Brand: Mercury / Mercruiser OMC Volvo Penta Fitment:Mercruiser, OMC, and Volvo Penta Engine Brochure (pdf)

Read more less

Distributor Cap for GM V6 Engines with Thunderbolt IV & V HEI IgnitionsDistributor Cap for GM V6 Engines with Thunderbolt IV & V HEI Ignitions.Engine Brand: Mercury / Mercruiser OMC Fitment:GM V-6 Engines with Thunderbolt IV & V HEI Ignitions Brochure (pdf)

Read more less

Rotor for Mercruiser & Volvo Penta Inboard EnginesRotor for Mercruiser and Volvo Penta Inboard Engines: Blue - new GM style "Module in Cap" distributors - V-8 application.Engine Brand: Mercury / Mercruiser Volvo Penta Fitment:New GM style "Module in Cap" distributors - V-8 application Brochure (pdf)

Read more less

Distributor Cap for GM V-8 Engines with Thunderbolt IV & V HEI IgnitionsDistributor Cap for GM V-8 Engines with Thunderbolt IV and V HEI Ignitions.Engine Brand: Mercury / Mercruiser OMC Fitment:GM V-8 Engines with Thunderbolt IV & V HEI Ignitions Brochure (pdf)

Read more less

Original Equipment Quality Replacement Outboard Starter for Evinrude 40, 50, 75 & 90 HP E-TEC ModelsThis outboard starter will fit Evinrude 40, 50, 75, and 90 HP E-Tec Models, 9-tooth drive gear. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: BRP-OMC 586768 BRP-OMC 587045 SIERRA 18-6826 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

2" Engine Flush Kit & AdaptorThe ConceptA simple quarter-turn quick-release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify winterization and cooling system flushing.In an EmergencyWhile the connected engine is running, close the seacock and remove the quick-release plug. Excess bilge water will be pumped overboard by the engine's raw water pump. Add GROCO BSA to pump out remote bilge locations.For WinterizationClose the seacock, remove the quick-release plug, and insert the service adaptor (included). Anti-freeze can be pumped into the cooling system.For System FlushingClose the seacock and insert the service adaptor. Dockside water can be used to flush the cooling system with the engine running at idle speed.Features:Bronze service adaptorSpecifications: Hose ID (in): 2" Thread NPT: 2" Overall Length: 5.2" *Add a GROCO Bilge Strainer to pump out remote bilge locations

Read more less

1-1/2" Engine Flush Kit & AdaptorThe ConceptA simple quarter-turn quick-release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify winterization and cooling system flushing.In an EmergencyWhile the connected engine is running, close the seacock and remove the quick-release plug. Excess bilge water will be pumped overboard by the engine's raw water pump. Add GROCO BSA to pump out remote bilge locations.For WinterizationClose the seacock, remove the quick-release plug, and insert the service adaptor (included). Anti-freeze can be pumped into the cooling system.For System FlushingClose the seacock and insert the service adaptor. Dockside water can be used to flush the cooling system with the engine running at idle speed.Features:Bronze service adaptorSpecifications: Hose ID (in): 1-1/2" Thread NPT: 1-1/2" Overall Length: 4.75" *Add a GROCO Bilge Strainer to pump out remote bilge locations

Read more less

Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" BarbThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 5/16" I.D. (Inner Diameter) hose and clamps are not included. Also, use thread sealant on all threads.Features: Yamaha fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)

Read more less

Primer Bulb - 1/4" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features: It is intended for use with a 1/4-inch interior diameter hose Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour) Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified Specifications: ID Diameter (inches): 1/4" Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs UPC: 022697931474

Read more less

Portable Fuel Tank - 3 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.Features:  3 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 16.6" Width: (inch) 11.45" Height: (inch) 7.3" *No gauge or fuel line included Quick Guide (pdf)

Read more less

Alternator 250 AMP 12V 3.15" Dual Foot Saddle K6 PulleyAlternator, XT Series, 250A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-200-12-IG, AT-DF-200-K6This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 250A Voltage: 12v Box Dimensions: 9"H x 10"W x 10"L WT: 16 lbs UPC: 676205502283 Brochure (pdf)

Read more less

Alternator 120 AMP 12V 4" Dual Foot Saddle K6 Pulley with Isolated GroundAlternator, 604 Series, 120A, 12V, Saddle Mount (Dual Foot), 4in, K6 Serpentine Pulley, Isolated Ground 4" J-180-Style Mounting;  Typical for Caterpillar, Cummins, Detroit Diesel & John Deere EnginesReplaces: 604-120-SR-IGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 120A Voltage: 12v Box Dimensions: 9"H x 9"W x 10"L WT: 13.35 lbs UPC: 676205750615 Brochure (pdf)

Read more less

Replacement Tilt Trim Motor for Yamaha 6GR-43880 SeriesEngineered to provide a reliable replacement for Yamaha Outboard Engines, the ARCO Part #6300 Tilt Trim Motor is designed for optimal performance with 425HP 4-Stroke models manufactured between 2018 and 2023.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Epoxy powder coating provides excellent corrosion protection for harsh marine environments. Induction-case hardened motor shafts for enhanced durability and resistance to wear at bearing surfaces. Armatures are rigorously tested to withstand 50 times the operation voltage (12V) to ensure longevity. Motors are tested under 5 different load levels to guarantee optimal performance. All motors meet or exceed OEM standards for reliable performance and maximum lifespan. Includes O-Ring for Easy Installation Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: Yamaha Tilt Trim Motor 6GR-43880-02-00 Yamaha Tilt Trim Motor 6GR-43880-01-00 Yamaha Tilt Trim Motor 6GR-43880-00-00 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Yamaha Tilt Trim Motor - 1990-2003 250HP/1994-2003 225HP UnitsReplacement outboard tilt trim motor that will fit Yamaha 225HP-250HP 1993-2003.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: YAMAHA Tilt Trim Motor 61A-43880-02-00 YAMAHA Tilt Trim Motor 61A-43880-01-00 YAMAHA Tilt Trim Motor 61A-43880-00-00 SIERRA Tilt Trim Motor 18-6782  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Yamaha Tilt Trim Motor - 2000-2019 T25 Series EnginesReplacement outboard tilt trim motor that will fit Yamaha 25HP-40HP, 2000-2022.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: YAMAHA Tilt Trim Motor 67C-43880-10-00 YAMAHA Tilt Trim Motor 67C-43880-01-00 YAMAHA Tilt Trim Motor 67C-43880-00-00 YAMAHA Tilt Trim Motor 65W-43880-10-00  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Tilt Trim Motor for Mercruiser I/O & Mercury O/B with Oildyne PumpReplacement tilt trim motor that will fit Mercruiser I/O and Mercury Outboards with Oildyne pump. 12 Volt, Ring Terminal Ends ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: MERCURY Tilt Trim Motor 17649 MERCURY Tilt Trim Motor 17649A1 MERCURY Tilt Trim Motor 17649A02 MERCURY Tilt Trim Motor 17649T MERCURY Tilt Trim Motor 87828 MERCURY Tilt Trim Motor 891736T SIERRA Tilt Trim Motor 18-6772 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Johnson/Evinrude, 2-Wire, 4 Bolt, EFIReplacement outboard tilt trim motor that will fit BRP-OMC 1998-Up, 75 HP-250 HP FFI Outboard Engines, 4-bolt mount, Female Sealed Terminal Ends, Includes O-ring.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:BRP-OMC Tilt Trim Motor 438786BRP-OMC Tilt Trim Motor 439937BRP-OMC Tilt Trim Motor 5005254SIERRA Tilt Trim Motor 18-6281This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Johnson/Evinrude Tilt Trim Motor - 2-Wire, 4 Bolt, Flat Blade Shaft Replacement outboard tilt trim motor that will fit BRP-OMC, 60, 70, 90, 115, 150, 175 HP. 1991-Up 200, 225 HP, 1991-94 120, 140 HP, 1995-UP 50 HP 3-cyl, 60 HP, V4 130 HP, 1997-Up 115-200 HP, 1998-99 225 HP, 2-wire connection, 4-bolt mount, Flat-blade shaft, Female Spade Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:BRP-OMC Tilt Trim Motor 434495BRP-OMC Tilt Trim Motor 434496BRP-OMC Tilt Trim Motor 438529BRP-OMC Tilt Trim Motor 438531BRP-OMC Tilt Trim Motor 5005374BRP-OMC Tilt Trim Motor 5005376SIERRA Tilt Trim Motor 18-6780This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Late Model Mercury, 2-Wire Replacement outboard tilt trim motor that will fit late model Mercury 135, 150 XR6, Magnum lll, 175, 200, 225, 250 HP, 105-140 HP Jet, 2-wire connection, 2-bolt mount, Includes O-ring, Flat-blade shaft, Bullet Connector Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:MERCURY Tilt Trim Motor 8M0031551MERCURY Tilt Trim Motor 8M0060140MERCURY Tilt Trim Motor 828708MERCURY Tilt Trim Motor 828708TMERCURY Tilt Trim Motor 878265A1MERCURY Tilt Trim Motor 878265A4SIERRA Tilt Trim Motor 18-6773This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Yamaha-4 Bolt, 5/8" Flat Blade Shaft Replacement outboard tilt trim motor that will fit Yamaha 2005-UP 75 HP 4 Stroke, 2005-UP 90 HP 4 Stroke, 2-wire connection, 4-bolt mount, Includes O-ring & Coupler, Ring Terminal Ends.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:YAMAHA Tilt Trim Motor 6D8-43880-00YAMAHA Tilt Trim Motor 6D8-43880-01YAMAHA Tilt Trim Motor 6D8-43880-09This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

2" x 50' Coil Type A2 Fuel Fill HoseTrident 2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features:  This hose is built with the best fuel, fire, and age-resistant formulation  Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also, provides excellent bend-ability Application: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube & Cover: NBR / Neoprene  Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to 100ºC)  Length: 50 ft. (15.24 m) Coil Specifications: Inner Diameter: (inch) 2" / (mm) 50.8 Outer Diameter: (inch) 2.48 / (mm) 63.5 Wall: (inch) 0.25 / (mm) 6.4 Working Pressure: (psi) 50 / (mpa) 0.345 Bend Radius: (inch) 7.0" / (mm) 178 *The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved Specifications: ID Diameter (inches): 2" Length (Feet): 50' Box Dimensions: 8"H x 31"W x 31"L WT: 56 lbs UPC: 704917009124

Read more less

5/8” A2 Fuel & Vent Line Hose - Black - Sold by the FootTrident 5/8” ID A2 Fuel Hose is a gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). Features:  Sold by the foot  This hose is built with the best fuel, fire, and age-resistant formulation  Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also, provides excellent bend-ability Application: Marine Fuel Hose for vent and diesel distribution  For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube: NBR Cover: NBR/PVC Blend Reinforcement: Polyester 2 spiral Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Length: Sold by the Foot Specifications:  Inner Diameter: (inch) 0.625" / (mm) 15.9 Outer Diameter: (inch) 0.960" / (mm) 24.4 Burst Pressure: (psi) 200 / (mpa) 1.38 Working Pressure: (psi) 50 / (mpa) 0.34 Bend Radius: (inch) 3" / (mm) 76.2 Weight: (Lb./100ft.) 25.84 / (Kg/m) 11.72 *The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted & CE certified.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/8" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.23 lbs

Read more less

Portable Fuel Tank - 3 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.Features:  3 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 16.6" Width: (inch) 11.45" Height: (inch) 7.3" *No fuel line included Quick Guide (pdf)

Read more less

Original Equipment Quality Replacement Tilt Trim Motor with 96" Leads - 2 Wire, 3-Bolt MountReplacement tilt trim motor that will fit BRP-OMC. 2-wire connection, Includes O-ring,3-bolt mount, Male Spade Terminal Ends, 96” Leads ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: BRP-OMC Tilt Trim Motor 391264 BRP-OMC Tilt Trim Motor 393259 BRP-OMC Tilt Trim Motor 393988 BRP-OMC Tilt Trim Motor 395840 BRP-OMC Tilt Trim Motor 434795 BRP-OMC Tilt Trim Motor 983019 BRP-OMC Tilt Trim Motor 983446 BRP-OMC Tilt Trim Motor 985237 SIERRA Tilt Trim Motor 18-6759 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Premium Replacement Inboard Alternator with Single Groove Pulley - 12V 55AReplacement alternator that will fit O.M.C. Cobra., Prestolite/Motorola, 12 Volt, 55 Amp, Internal regulator, Negative ground, 2-inch mounting foot, Single groove pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:BRP-OMC Alternator 983424BRP-OMC Alternator 984565BRP-OMC Alternator 985465BRP-OMC Alternator 985466BRP-OMC Alternator 986008BRP-OMC Alternator 988247BRP-OMC Alternator 3853853BRP-OMC Alternator 3854182BRP-OMC Alternator 3854809BRP-OMC Alternator 3857298BRP-OMC Alternator 3860769VOLVO Alternator 3850927-9VOLVO Alternator 3853853-4VOLVO Alternator 3854182-7VOLVO Alternator 3854809-5VOLVO Alternator 3857298VOLVO Alternator 3860173VOLVO Alternator 857298SIERRA Alternator 18-6260SIERRA Alternator 18-6842This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 55A Voltage: 12v Box Dimensions: 8"H x 8"W x 9"L WT: 11.2 lbs UPC: 693006001395 Quick Guide (pdf)

Read more less

1-1/2" x 50' Extra-Flex Corrugated Marine Wet Exhaust HoseTrident Extra-Flex corrugated marine wet exhaust hose with EXTRA flexibility for easier installations on tight bends for longer connections. Thick tube and cover with wire helix between 2-ply reinforcement. Exceptional flexibility and bend radius. Resists heat, ozone, exhaust fumes, panting, and collapse. Exceeds (SAE J2006-R2, and ABYC & NMMA P-1 exhaust standards). Lloyd’s Registry Type Approved.Corrugated Wet Exhaust and Water Marine Hose offers the best performance with an incredible bend radius and high-temperature EPDM Rubber compounds. This enables it to handle higher temperatures while providing longer life and durability than its competition. It exceeds SAE J2006-R2, ABYC, and NMMA P-1 exhaust standards and is Lloyd’s Registry Type Approved. Black High Temp EDPM Rubber 250°F (121°C) Max. continuous.Features: Black High Temp EDPM Rubber 250°F (121°C) Max. Sizes: 1 1/2" to 8", 38mm to 203.2 mm Colors: Black with White stripe with yellow edges Packaging: 6.25' to 12.5' (1.9-3.8m) lengths, 50’ (15m) Coils Specifications: ID Diameter (inches): 1-1/2" Length (Feet): 50' Box Dimensions: 8"H x 26"W x 26"L WT: 34 lbs UPC: 704917028163 Quick Guide (pdf)

Read more less

2-1/2" x 25' Ocean-Flex Multipurpose HoseThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.Provides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.Specifications: Construction: Tube Black Nitrile, Cover Black Nitrile Reinforcement: Multiple Textile Spirals, Dual Steel Wire Helix Temperature Range: -20°F to 212°F (-29ºC to 100ºC) Lengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1/2” ID.) Specifications: ID Diameter (inches): 2-1/2" Length (Feet): 25' Box Dimensions: 3"H x 38"W x 38"L WT: 38 lbs UPC: 704917018799 Quick Guide (pdf)

Read more less

IG026 Ignition Coil for Yamaha Outboard EnginesThis ARCO ignition coil is designed for specific Yamaha outboard engines.Fits:Outboard engine 115-225HP; L200, L150, L130, 115, 130, 150, 175, 200, 225Replaces: YAMAHA Ignition Coil 6E5-85570-11-00 YAMAHA Ignition Coil 6E5-85570-10-00 SIERRA Ignition Coil 18-5110 CDI ELECTRONICS Ignition Coil 187-6511 Warranty InformationWhen properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

2" x 50' Ocean-Flex Multipurpose HoseThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.Provides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.Specifications: Construction: Tube Black Nitrile, Cover Black Nitrile Reinforcement: Multiple Textile Spirals, Dual Steel Wire Helix Temperature Range: -20°F to 212°F (-29ºC to 100ºC) Lengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1/2” ID.) Specifications: ID Diameter (inches): 2" Length (Feet): 50' Box Dimensions: 6"H x 31"W x 31"L WT: 38.5 lbs Quick Guide (pdf)

Read more less

1-1/2" x 50' Ocean-Flex Multipurpose HoseThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.Provides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.Specifications: Construction: Tube Black Nitrile, Cover Black Nitrile Reinforcement: Multiple Textile Spirals, Dual Steel Wire Helix Temperature Range: -20°F to 212°F (-29ºC to 100ºC) Lengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1/2” ID.) Specifications: ID Diameter (inches): 1-1/2" Length (Feet): 50' Box Dimensions: 6"H x 30"W x 30"L WT: 37.5 lbs Quick Guide (pdf)

Read more less

Camshaft Position Sensor for Volvo Penta EnginesCamshaft Position Sensor for Volvo Penta Engines: MCM and MEI 350 Mag MPI, MX 5.7L MPI, 6.2L MPI & 377 Mag.Engine Brand:Volvo PentaFitment:MCM and MEI 350 Mag MPI, MX 5.7L MPI, 6.2L MPI & 377 Mag Brochure (pdf)

Read more less

MAP Sensor for Mercruiser Engines: MCM V-6 & V-8 (305, 350 & 496 CID) MPI Engines with ECM 555MAP Sensor for Mercruiser engines: MCM V-6 & V-8 (305, 350 & 496 CID) MPI Engines With ECM 555.Engine Brand:Mercury / MercruiserFitment:MCM V-6 & V-8 (305, 350 & 496 CID) MPI Engines with ECM 555 Brochure (pdf)

Read more less

Condenser for GM 4 & 6-Cylinder Engine with Delco IgnitionCondenser for 4 and 6-cylinder Mercruiser, Volvo Penta, and OMC inboard engines with Delco Conventional Ignitions.Engine Brand: Mercury / Mercruiser OMC Volvo Penta Fitment: GM 4 and 6-cylinder Engines With Delco Conventional Ignition Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 4"L WT: 0.5 lbs UPC: 724469630010 Brochure (pdf)

Read more less

Distributor Cap for Ford & GM V8 EnginesDistributor Cap for Ford & GM V-8 Engines With Prestolite Conventional Ignition (Screw Hold-Down Cap).Engine Brand: Mercury / Mercruiser OMC Volvo Penta Fitment:Ford & GM V-8 Engines With Prestolite Conventional Ignition (Screw Hold-Down Cap) Brochure (pdf)

Read more less

Crankshaft Position Sensor for Volvo Penta 4.3, 5.0 & 5.7LCrankshaft Position Sensor for Volvo Penta 4.3, 5.0, and 5.7L Models with composite timing cover.Engine Brand:Volvo PentaFitment:Volvo 4.3, 5.0, and 5.7L Models with composite timing cover Brochure (pdf)

Read more less

Fuel Pump Assembly for Mercury & Mercruiser Engines with High-Pressure PumpFuel Pump Assembly for Mercury and Mercruiser engines: Fits with MCM/MIE 4.3L/V6 and 5.0L/V8 Gen+ and some 350 ci carburetors.Engine Brand:MercruiserFitment: 1998 MERCURY MARINE Fuel Pump 4.3L 262 2000 MERCURY MARINE Fuel Pump 5.0L 305 2000 MERCURY MARINE Fuel Pump 5.7L 350 Fits with MCM/MIE 4.3L/V6 and 5.0L/V8 Gen+ and some 350 ci carburetors Brochure (pdf)

Read more less

Chrysler/Suzuki Tank Fitting - 1/4" NPT ThreadThis Attwood Fuel Tank Male Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features: Male tank fitting designed for Chrysler & Suzuki engines and fuel tanks Designed for Under 75HP (Small Bore) Material Construction: Chrome-plated Brass *Specifically mates to Attwood part numbers: 8884-6 & 88FTS014-6 Quick Guide (pdf)

Read more less