Gasoline Fume Detector with Dual Channel and Blower Control - 12/24VThe Dual Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate.  Complete system includes Blower Control Relay, easy installation and precise monitoring.  Features: Simple Installation Audible and visual alarm to indicate LEL (Lower Explosive Level) presence  Monitors two (2) separate areas simultaneously  Automatically activates bilge blower Technical Specifications: Operating Temperature: -40° to 185°F (-40° to 85°C) Current Draw Nominal - 55mA  Current Draw Maximum - 150mA Operating Voltage - 9 to 30V DC Alarm Horn - 68 dB Display Style - Square with Black Bezel Display Dimensions - 2-5/8" x 2-5/8" (6.7 x 6.7 cm) Cutout Dimension - 2-1/8" (5.4 cm) round hole In the Box: Fume Detector Fuel sensors x two (2) 20' Extension Cable x two (2) Blower Relay x one (1) Instruction manual *Sold as an Individual  Specifications: Blower Relay: Yes Fume Type: Gasoline Generator Shutdown: No Sensors Included: 2 Voltage - Input Range (Volts): 9-30v Box Dimensions: 4"H x 4"W x 8"L WT: 1.6 lbs UPC: 619749202561 Owner's Manual (pdf)Brochure (pdf)

Read more less

Propane Fume Detector & Alarm w/2 Plastic Sensors & Solenoid Valve - Square Black Bezel DisplayDetect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.Features/Specifications: 2-5/8" Square Black Display with LEDs & Silence/Test Button Solenoid Valve & Adapter Solenoid Valve Control Button Automatically Closes Solenoid Valve 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA Specifications: Blower Relay: No Fume Type: Propane Generator Shutdown: No Sensors Included: 2 Voltage - Input Range (Volts): 9-30v Box Dimensions: 4"H x 4"W x 8"L WT: 2 lbs UPC: 619749202684

Read more less

Engine Shut Down SystemFeatures: 3 - 20 Amp Circuits 12/24 VDC Engine Shut Down System Round Display Specifications: Blower Relay: No Generator Shutdown: No Sensors Included: 3 Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 6"W x 12"L WT: 1.55 lbs UPC: 619749211181

Read more less

Gasoline Fume Detector w/Blower Control -  Chrome Bezel - 12VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate.  Complete system includes Blower Control Relay, easy installation and precise monitoring.  Features: Simple Installation Audible and visual alarm to indicate LEL (Lower Explosive Level) presence  Monitors one (1) single area  Automatically activates bilge blower Technical Specifications: Operating Temperature: -40° to 185°F (-40° to 85°C) Current Draw Nominal - 55mA  Current Draw Maximum - 95mA Operating Voltage - 9 to 30V DC Alarm Horn - 68 dB Display Style - Round with Chrome Bezel Display Dimensions - 2-3/16" (5.6 cm) round Cutout Dimension - 2-1/16" (5.2 cm) round hole In the Box: Fume Detector Fuel sensors x one (1) 20' Extension Cable x one (1) Blower Relay x one (1) Instruction manual *Sold as an Individual  Specifications: Blower Relay: Yes Fume Type: Gasoline Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 9 to 30 Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs UPC: 619749202547 Owner's Manual (pdf)Brochure (pdf)

Read more less

Gasoline Fume Detector w/Blower Control -  Black Bezel - 12VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate.  Complete system includes Blower Control Relay, easy installation and precise monitoring.  Features: Simple Installation Audible and visual alarm to indicate LEL (Lower Explosive Level) presence  Monitors one (1) single area  Automatically activates bilge blower Technical Specifications: Operating Temperature: -40° to 185°F (-40° to 85°C) Current Draw Nominal - 55mA  Current Draw Maximum - 95mA Operating Voltage - 9 to 30V DC Alarm Horn - 68 dB Display Style - Round with Chrome Bezel Display Dimensions - 2-3/16" (5.6 cm) round Cutout Dimension - 2-1/16" (5.2 cm) round hole In the Box: Fume Detector Fuel sensors x one (1) 20' Extension Cable x one (1) Blower Relay x one (1) Instruction manual *Sold as an Individual  Specifications: Blower Relay: Yes Fume Type: Gasoline Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 9 to 30 Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs UPC: 619749202523 Owner's Manual (pdf)Brochure (pdf)

Read more less

Gasoline Fume Detector - Chrome Bezel - 12/24VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate.  Features: Simple Installation Audible and visual alarm to indicate LEL (Lower Explosive Level) presence  Monitors one (1) single area  Technical Specifications: Operating Temperature: -40° to 185°F (-40° to 85°C) Current Draw Nominal - 55mA  Current Draw Maximum - 95mA Operating Voltage - 9 to 30V DC Alarm Horn - 68 dB Display Style - Round with Chrome Bezel Display Dimensions - 2-3/16" (5.6 cm) round Cutout Dimension - 2-1/16" (5.2 cm) round hole In the Box: Fume Detector Fuel sensors x one (1) 20' Extension Cable x one (1) Instruction manual *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Gasoline Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 9 to 30 Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs UPC: 619749202530 Owner's Manual (pdf)Brochure (pdf)

Read more less

Propane Fume Detector w/Plastic Sensor - No Solenoid Valve - Black Bezel DisplayDetect Propane leaks early to prevent personal injury and possible explosions.Features/Specifications: 2-3/16" Round Black Display with LEDs & Silence/Test Button 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA Specifications: Blower Relay: No Fume Type: Propane Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 9-30v Box Dimensions: 4"H x 4"W x 8"L WT: 1.6 lbs UPC: 619749202646

Read more less

Gasoline Fume Detector - Black Bezel - 12/24VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate.  Features: Simple Installation Audible and visual alarm to indicate LEL (Lower Explosive Level) presence  Monitors one (1) single area  Technical Specifications: Operating Temperature: -40° to 185°F (-40° to 85°C) Current Draw Nominal - 55mA  Current Draw Maximum - 95mA Operating Voltage - 9 to 30V DC Alarm Horn - 68 dB Display Style - Round with Black Bezel Display Dimensions - 2-3/16" (5.6 cm) round Cutout Dimension - 2-1/16" (5.2 cm) round hole In the Box: Fume Detector Fuel sensors x one (1) 20' Extension Cable x one (1) Instruction manual *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Gasoline Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 9 to 30 Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs UPC: 619749202516 Owner's Manual (pdf)Brochure (pdf)

Read more less

Deluxe Helm Display w/Membrane Switch, Remote Horn & LEDs f/Engine Shutdown System - Black Bezel DisplayFeatures/Specifications: Compact Design 2-5/8" Square Black Bezel Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Specifications: Blower Relay: No Generator Shutdown: No Voltage - Input Range (Volts): 9-30v Box Dimensions: 4"H x 5"W x 7"L WT: 0.4 lbs UPC: 619749207269

Read more less

CO Alarm Relay Control ModuleThe RCM5 is a Relay Control Module.  It allows you to automatically deactivate devices based on the status of the connected Xintex detection device.  The RCM5 uses a signal provided by the connected Xintex device to activate the internal relay.  This allows you to shutdown generators or other devices automatically.Compatible With:Interconnect models onlyTechnical Specifications: Material - Flame retardant ABS plastic Dimensions (L x W x H) - 3.1" x 2.1" x 1.83" (7.6 x 5.2 x 4.6 cm) Operating Voltage - 9 - 32V DC *Sold as an Individual  Owner's Manual (pdf)

Read more less

CO Alarm Internal Battery w/Interconnect - WhiteA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): N/A Box Dimensions: 2"H x 4"W x 6"L WT: 0.4 lbs UPC: 619749208693 Owner's Manual (pdf)Brochure (pdf)

Read more less

CO Alarm 12/24V DC with Interconnect - WhiteA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 12 - 24 Box Dimensions: 2"H x 4"W x 6"L WT: 0.4 lbs UPC: 619749208853 Owner's Manual (pdf)Brochure (pdf)

Read more less

CO Alarm 12/24V DC with Interconnect - Black  A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 12 - 24 Box Dimensions: 2"H x 4"W x 6"L WT: 0.4 lbs UPC: 619749208846 Owner's Manual (pdf)Brochure (pdf)

Read more less

Fixed Heat Detector with BaseThe Fireboy-Xintex Heat Detector uses a single thermistor to sense the air temperature around the detector. This heat detector was designed to detect how fast the temperature is increasing.Features: 163°F Fixed Heat Detector Housing: White flame-retardant polycarbonate Terminals: Nickel-plated stainless steel Ideal in environments that are dirty or smoky Unaffected by wind or atmospheric pressure Remote test feature Specifications: Detection Principle: Measurement of heat using a thermistor Sampling Frequency: Once every four seconds Supply Voltage: 8.5 V dc to 33 V dc Supply Wiring: Two wire supply, polarity sensitive Power-up Time: < 20 seconds Minimum: ‘detector active’ voltage: 6 V Holding Voltage: 5 V - 33 V Minimum Holding Current: 8 mA  Minimum Voltage to Light Alarm LED: 5 V  Alarm Reset Voltage: < 1 V  Alarm Reset Time: One second  Alarm Indicator: Integral indicator with 360º visibility Operating & Storage Temperature: -40ºC to +70ºC Operation: Open-web casing that enables air to flow freely across a thermistor which measures the air temperature every two seconds  A microprocessor stores the temperatures and compares them with pre-set values to determine whether a fixed upper limit - the alarm level - has been reached Detectors the microprocessor uses algorithms to determine how fast the temperature is increasing

Read more less

Gasoline & Propane Sensor OnlyThis sensor is a replacement for Fireboy-Xintex P systems. Installation: The sensor should be located by the propane-powered appliance, near the floor Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage Harsh chemicals should not be used to clean sensors Use the appropriate #8 mounting hardware to mount the Propane Fume Sensor in the desired location The rubber gasket should be installed between the sensor and the mounting surface Connect to the extension cable using the attached quick-disconnect connectors (Sold Separately)

Read more less

CO Alarm Internal Battery - WhiteA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): N/A Box Dimensions: 2"H x 4"W x 4"L WT: 1 lbs UPC: 619749208662 Owner's Manual (pdf)Brochure (pdf)

Read more less

CO Alarm 12/24V DC - WhiteA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 12 - 24 Box Dimensions: 2"H x 4"W x 4"L WT: 1 lbs UPC: 619749208822 Owner's Manual (pdf)Brochure (pdf)

Read more less

CO Alarm 12/24V DC - BlackA Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.*Long sensor life – approximately 7 year end-of-life (EOL)Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual  Specifications: Blower Relay: No Fume Type: Carbon Monoxide Generator Shutdown: No Sensors Included: 1 Voltage - Input Range (Volts): 12 - 24 Box Dimensions: 2"H x 4"W x 6"L WT: 0.4 lbs UPC: 619749208723 Owner's Manual (pdf)Brochure (pdf)

Read more less

Manual Discharge Cable Kit - 14'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation. Compatible With:MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systemsFeatures: Easily routed with engine cables and electrical wiring  Various lengths for vessel specific installation  In the Box: Cable - 14' Mounting plate Pull handle Safety pin *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 2"H x 18"W x 18"L WT: 2.2 lbs UPC: 619749311188

Read more less

Manual Discharge Cable Kit - 10'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation. Compatible With:MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systemsFeatures:  Easily routed with engine cables and electrical wiring  Various lengths for vessel specific installation  In the Box: Cable - 10' Mounting plate Pull handle Safety pin *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 2"H x 17"W x 18"L WT: 0.7 lbs UPC: 619749311164

Read more less

Manual Discharge Cable Kit - 6'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation. Compatible With:MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systemsFeatures:  Easily routed with engine cables and electrical wiring  Various lengths for vessel specific installation  In the Box: Cable - 6' Mounting plate Pull handle Safety pin *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 3"H x 17"W x 17"L WT: 1.3 lbs UPC: 619749311140

Read more less

System Ready Panel Warning Light The green warning L.E.D. provides constant monitoring of the fire suppression system when the ignition switch is On.  Complies with U.S. Coast Guard requirements for system approval.This 2" round indicator light has an adhesive back aluminum plate for easy panel mounting and requires a 5/16" hole for wire routing.Standard with all pre-engineered fire extinguishing systems.Compatible With:MA2, CG2 and GA suppression systems *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 4"L WT: 0.2 lbs UPC: 619749209980

Read more less

Conversion Plate for  CO Detectors - White Optional conversion plate for mounting CMD6-M Carbon Monoxide Alarms in places where larger CMD2-M, CMD3-M, CMD4-M or CMD5-M units were previously installed.  This cover plate covers up unsightly wear or openings from previous installations.Mounting hardware included.*Sold as an Individual  Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 4"W x 7"L WT: 0.2 lbs UPC: 619749207641

Read more less