Show previous products

• 

  Quantity Add to cart

  Furuno Furuno NAVPILOT300 Autopilot For SeaStar Optimus

  Furuno NAVPILOT300 AutopilotFor SeaStar OptimusModel: NAVPILOT 300-OPTThe NavPilot 300-OPT is a complete NavPilot 300 system with all of the necessary components, cables and gateways to connect to a SeaStar Optimus 360 Joystick system (not included).he NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!The SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).FishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).With Fantum Feedback, NAVpilot outboard/sterndrive installations no longer require use of a physical rudder feedback unit. NAVpilot software clears the path to a simplified installation, while also delivering enhanced steering control.SpecificationsNavPilot 300 SeaStar Optimus Pack

  Read more less

  $2,295.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno DRS2DNXT 19" Solid-State Doppler Radar w/Target Analyzer Fast Target Tracking f/NavNet TZtouch, TZtouch2 TZtouch3 [DRS2DNXT]

  Over $4,000 in Savings w/Qualifying Furuno Purchases UNTIL 06/30/2025 VIEWDRS2DNXT 19" Solid-State Doppler Radar with Target Analyzer & Fast Target Tracking for NavNet TZtouch, TZtouch2 & TZtouch3 - LESS CABLEThe NXT Step with Doppler Radar TechnologyThe Furuno NXT Radar is the next step in Radar evolution; a Solid-State Radar with pulse compression, Target Analyzer™, and Fast Target Tracking™ utilizing Doppler technology. Combined with FURUNO exclusive RezBoost™ technology for beam sharpening, NXT packs the performance of a larger Radar in a more compact package.Target Analyzer Function Utilizing Doppler TechnologyNXT was the first Radar in the world to use the Furuno exclusive Target Analyzer™ function, where targets that are approaching your vessel automatically change color. Green targets are targets that stay stationary or are moving away from you, while red targets are moving towards your vessel. Target Analyzer™ works independently of vessel speed, both your own vessels and target vessels, with minor limitations. Echoes dynamically change colors as targets approach, or get farther away from your vessel. Target Analyzer™ can increase safety, as well as improve situational awareness.Fast Target TrackingOnce a target has been selected, a speed and course vector is displayed in seconds. With accurate tracking information, estimation of other vessels' course and speed is greatly simplified. With Doppler technology, any vessel approaching yours will automatically display a target vector, as well as sound an alarm.RezBoost™ Beam SharpeningFor the first time, Furuno's exclusive RezBoost™ technology is used in one of our Radar units, with impressive performance. With RezBoost™ set to MAX, the sharpness of a 2-degree beam width can be achieved.Specifications" Antenna Size: 19" Antenna Type: Radome Band: X-Band Beam Width: 5.2 Degrees Power Usage: 12-24 VDC Power Output: 25W Range: 48nm SIGNAL/POWER CABLE IS AN ACCESSORYThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Array Size (Inches): 24" Power - Output: 25w Range - Max (Miles): 48nm Box Dimensions: 11"H x 21"W x 21"L WT: 20 lbs UPC: 611679396693

  Read more less

  $2,295.00

  Quantity Add to cart

• 

  View options

  Furuno Furuno NavPilot 300 Seastar Optimus Package [NAVPILOT 300-OPT]

  NavPilot 300 Seastar Optimus Autopilot PackageSteer By Wire for Seastar Optimus 360The NavPilot 300-OPT is a complete NavPilot 300 system with all of the necessary components, cables and gateways to connect to a SeaStar Optimus 360 Joystick system (not included).What's in the Box? FAP-3011 - Adaptive Autopilot with 4.1" Color LCD GC-001 - Gesture Controller FAP3012 - Processor Unit PG700 - Fluxgate Magnetic Sensor With Enhanced Stability By A Solid-State Rate Gyroscope, w/ 6M Cable AIR-335-792 - NMEA2000 Micro Terminator  AIR-335-791 - NMEA2000 Micro Terminator AIR-052-531 - NMEA2000 T-Connector, Female/Female/Male x 3 DOC-300-OPT - NavPilot 300-OPT Document NavPilot 300 is not your ordinary AutopilotThe NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.Gesture Control - just push, point and shoot!The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!(Note: A Furuno PG700, SC33 or other compatible NMEA2000 vessel heading source is required.)Versatile Display Modes on a vivid 4.1" Color LCD DisplayThe SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).Integrate your helm with NavPilot's FishHunter modeFishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).Furuno Fantum FeedbackWith Fantum Feedback, NAVpilot outboard/sterndrive installations no longer require use of a physical rudder feedback unit. NAVpilot software clears the path to a simplified installation, while also delivering enhanced steering control.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Steer-By-Wire Box Dimensions: 15"H x 15"W x 26"L WT: 13.8 lbs UPC: 611679387844

  Read more less

  $2,295.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno TZT-9F 9" TZtouch3 Multifunction Display

  Furuno TZT9F 9" TZT3 Multi Function DisplayModel: TZT9FHybrid controls enhance this 9" Multi Function Display, making it easy and intuitive to use under any sea conditions. Rest your hand on the RotoKey™ as you crash through the waves, and navigate easily to your charted destination. Featuring a new, powerful quad-core processor for lightning-fast response time and a built-in Single Channel 1kW TruEcho CHIRP™ & CW Fish Finder.We listened to you and worked tirelessly to make TZtouch3 the easiest MFD on the market to use... bar none. With edge-swipe features and single tap menu options, you’re never more than a tap or swipe away from what you want to see or do. It’s that simple.Captains who have smaller boats know that when you are crashing through the waves, it can be difficult to get an accurate tap on the screen. That’s why we made a TZtouch3 MFD with Hybrid Control. You get the best of both worlds with a full multi touch display and a handy, built-in keyboard that features a Rotokey™, cursor pad and dedicated buttons!The new PIN CODE Lock feature allows you to require a four-digit password to be entered upon startup, keeping your data safe against theft.Create your routes at home using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can retrieve them from the cloud & download to your TZtouch3. Also, create events on your MFD and retrieve them at home because the data is synchronized automatically & securely to My TimeZero. TZ Cloud also stores marks, routes, boundaries, photos, and catch data! (*Cloud.MyTimezero.com raster planning charts for US only)TZT9F incorporates a powerful internal 1kW TruEcho CHIRP™ or CW Fish Finder. TruEcho CHIRP Fish Finders transmit pulses across a wide range of frequencies, allowing Furuno’s superior digital signal processing (DSP) to display fish and structure targets with unparalleled clarity, accuracy and resolution.Freely choose the charts that fit your individual needs. Easily select either raster, vector or fishing charts, Mapmedia brings an authentic vector and raster chart library to your NavNet TZtouch3. "C-MAP" as well as "Datacore by Navionics" vector cartography are optional charts that can be easily unlocked. Mapmedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography.Satellite photography is included in the MapMedia raster and vector charts, simply called Satellite PhotoFusion™. Land areas (zero depth) are completely opaque, displayed as satellite photos on the chart. As the depth increases, the satellite image is merged with the chart data to provide you with added detail on seabed areas in shallow water without losing vital chart information.And finally, CMOR’s high-resolution, shaded-relief bathymetric bottom images help navigators identify suitable locations for fishing and diving.Are you ready to go on a Radar power trip? Nowhere else will you find Radar as powerful or with the amazing target detection of Furuno’s NXT and X-Class Radars. We juiced the power of our NXT Solid-State Doppler Radars to give you outstanding long-distance performance that matches their amazing close range ability.The beauty of NavNet TZtouch3 is its scalability - systems can be as big or small as you need. Add, change or remove AIS, VHF, Compass, Weather and other sensors as needed to dial in your dashboard, whether fishing, cruising or sailing.Specifications Display Size 9 inches Display Type Color Multi Touch LCD Power Usage 12-24 VDC Receiver Type GPS or SBAS or WAAS-GPS Frequency CW 50-200kHz or CHIRP 40kHz to 225kHz Power Output 300 W or 600 W or 1 kW Chart Type Vector or Raster or Satellite Photo or 3D Data or C-Map or CMOR What's in the Box: TZT9F Mounting Bracket Mounting Knobs x 2 Soft Cover LCD Cleaning Cloth Fuse 5A Power Cable Assy 3.5M Flush Mount Fixture Dosumentation

  Read more less

  $2,195.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno NAVPILOT300 Autopilot With PG700 Requires Pump

  Furuno Navpilot 300 Autopilot with PG700, requires DriveModel: NAVPILOT 300/PG 1-DIN 4.1" IP56 Waterproof Color Display (2 more Control Heads can be added) Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunter Pigtail cable design for simplified installation NMEA2000 Certified System (includes output of Heartbeat PGN) Self-learning adaptive software Bluetooth Gesture Controller (GC001) included as standard supply The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!The SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).What's in the Box: FAP3011 - Control Unit FAP3012 - Processor GC001 - Gesture Controller PG700

  Read more less

  $2,195.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno NavNet TZtouch3 9" Hybrid Control MFD w/Single Channel CHIRP Sonar [TZT9F]

  NavNet TZtouch3 9" MFD, Hybrid Control with Single Channel CHIRP™ SonarGo on a power trip with the most powerful MFD SeriesHybrid controls enhance this 9” Multi Function Display, making it easy and intuitive to use under any sea conditions. Rest your hand on the RotoKey™ as you crash through the waves, and navigate easily to your charted destination. Featuring a new, powerful quad-core processor for lightning-fast response time and a built-in Single Channel 1kW TruEcho CHIRP™ & CW Fish Finder.EASY to use; because finding your happy place shouldn't be difficult!We listened to you and worked tirelessly to make TZtouch3 the easiest MFD on the market to use... bar none. With edge-swipe features and single tap menu options, you’re never more than a tap or swipe away from what you want to see or do. It’s that simple.The return of Hybrid ControlCaptains who have smaller boats know that when you are crashing through the waves, it can be difficult to get an accurate tap on the screen. That’s why we made a TZtouch3 MFD with Hybrid Control. You get the best of both worlds with a full multi touch display and a handy, built-in keyboard that features a Rotokey™, cursor pad and dedicated buttons!Protect your livelihood with new PIN CODE securityThe new PIN CODE Lock feature allows you to require a four-digit password to be entered upon startup, keeping your data safe against theft.Never lose waypoints, routes or settings again with TZ CloudCreate your routes at home using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can retrieve them from the cloud & download to your TZtouch3. Also, create events on your MFD and retrieve them at home because the data is synchronized automatically & securely to My TimeZero. TZ Cloud also stores marks, routes, boundaries, photos, and catch data! (*Cloud.MyTimezero.com raster planning charts for US only)We gave you something to CHIRP about!TZT9F incorporates a powerful internal 1kW TruEcho CHIRP™ or CW Fish Finder. TruEcho CHIRP Fish Finders transmit pulses across a wide range of frequencies, allowing Furuno’s superior digital signal processing (DSP) to display fish and structure targets with unparalleled clarity, accuracy and resolution.MapMedia Raster and Vector Chart LibraryFreely choose the charts that fit your individual needs. Easily select either raster, vector or fishing charts, Mapmedia brings an authentic vector and raster chart library to your NavNet TZtouch3. “C-MAP” as well as “Datacore by Navionics” vector cartography are optional charts that can be easily unlocked. Mapmedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography.Satellite photography is included in the MapMedia raster and vector charts, simply called Satellite PhotoFusion™. Land areas (zero depth) are completely opaque, displayed as satellite photos on the chart. As the depth increases, the satellite image is merged with the chart data to provide you with added detail on seabed areas in shallow water without losing vital chart information.And finally, CMOR’s high-resolution, shaded-relief bathymetric bottom images help navigators identify suitable locations for fishing and diving.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Transducer Included: No Touchscreen: Yes Screen Size: 9" Cartography Brand: Furuno Box Dimensions: 9"H x 12"W x 16"L WT: 13.1 lbs UPC: 611679392732

  Read more less

  $2,195.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno NavPilot 300/PG Autopilot System w/PG700 Sensor [NAVPILOT 300/PG]

  NavPilot 300/PG Autopilot System with PG700 SensorNavPilot 300 is not your ordinary Autopilot - The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.The NavPilot 300/PG includes the PG700 Fluxgate Compass Heading Sensor with magnetic field distortion correction, providing highly accurate and stable heading information.Gesture Control - just push, point and shoot!The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!Versatile Display Modes on a vivid 4.1" Color LCD DisplayThe SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).Features: 1-DIN 4.1" IP56 Waterproof Color Display (2 more Control Heads can be added) Full control from NavNet TZtouch, TZtouch2 & the all-new GP1871F/GP1971F Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunter Pigtail cable design for simplified installation NMEA2000 Certified System (includes output of Heartbeat PGN) Self-learning adaptive software Built-in simulator and slide show Bluetooth Gesture Controller (GC001) included as standard supply Targeted for center console outboards and drive-by-wire systems on small to mid-sized boats Comes with: FAP-3011- Control Unit GCV-001 - Gesture Controller FAP3012 - Processor Unit PG700 - Heading Sensor Unit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Hydraulic Box Dimensions: 7"H x 8"W x 9"L WT: 22.6 lbs UPC: 611679378101

  Read more less

  $2,195.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno B275LHW Bronze Thru Hull with bare Wire

  Airmar B275-LHW Wide Beam CHIRP Bronze Thru-Hull Transducer Bare WireModel: B275LHW Depth & fast-response water-temperature sensor 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.Specifications Low Frequency CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth High Frequency CHIRPS from 150 kHz to 250 kHz 25° constant beamwidth Boat size 8 m (25’) and above Hull type Fiberglass or wood Hull deadrise Up to 20° with fairing block Acoustic window Urethane Connector None - Bare wire What's in the Box: B275LHW Fairing block and hardware

  Read more less

  $2,176.23

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno B275LHW-12P Bronze Thru Hull with 12-Pin

  Airmar B275C-LHW Wide Beam CHIRP Bronze Thru-Hull Transducer with Raymarine 11-Pin Low/Dual Beam With 12-Pin for FurunoModel: B275CLHW-12P Depth & fast-response water-temperature sensor 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.Specifications Low Frequency CHIRPS from 42 kHz to 65 kHz ?25° to 16° beamwidth High Frequency CHIRPS from 150 kHz to 250 kHz ?25° constant beamwidth Boat size 8 m (25’) and above Hull type Fiberglass or wood Hull deadrise Up to 20° with fairing block Acoustic window Urethane What's in the Box: B275CLHW-12P Fairing block and hardware

  Read more less

  $2,176.23

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno B275LHW Bronze Thru-Hull CHIRP Transducer - 12-Pin [B275LHW-12P]

  B275LHW Bronze Thru-Hull CHIRP Transducer - 12-PinBronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz.The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Pins: 12 Speed Included: No Temperature: Yes Chirp: Low/High Wide Imagining: Standard Mounting Style: Thru-Hull Box Dimensions: 7"H x 19"W x 26"L WT: 25 lbs UPC: 6116793889952

  Read more less

  $2,100.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno 165T-TM54 Transom Mount With Motion Sensor

  The 165T-TM54 is a multi-beam transducer for the DFF3D that affords a 120 degree pot-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions.

  Read more less

  $2,052.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno 165T-B54 Thru-Hull With Motion Sensor and Block

  The 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120 degree pot-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions.

  Read more less

  $2,052.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno DFF3-UHD High-Power TrueEcho CHIRP Black Box Fish Finder

  Furuno DFF3-UHD High-Power TruEcho CHIRP Black Box Fish Finder for NavNet TZouch3 and NavNet TZtouch2 TZT2BB w/5M LAN Cable, Less TransducerModel: DFF3-UHD 2 kW or 3 kW Power Output Transmits across Low, Medium, and High CHIRP frequency ranges High Power = greater resolution and depth capability at all ranges Compatible with NavNet TZtouch3 as well as NavNet TZtouch2 TZT2BB Black Box MFD Gathers more expansive and higher-quality data than comparable tone pulse Fish Finders Find and catch more of your target species, game fish and baitfish, even when they're tightly schooled or near the seafloor A-Scope feature and programmable Fish, Depth, or Temp Alarms Enhanced automatic cruising or fishing modes to suit your style of boating The DFF3-UHD High Power TruEcho CHIRP™ Fish Finder for NavNet TZtouch3 delivers the ability to see fish and bottom structure deeper and clearer than ever before. Furuno’s superior digital signal processing interprets echoes from fish and underwater structures with unparalleled clarity, accuracy, and resolution, at unprecedented depths - we’re talking maximum depth scales down to 15,000 feet!Specifications TX Type Dual Band CHIRP and CW Output Power CHIRP: Max. 3 kWCW: 2/3 kW Max. Range Scale 15,000 ft Frequency 25 to 242 kHz BT-5 for 5/10 kHz CW Transducer Compatible Interconnection Connect to MFD Network via Ethernet Networked MFDs NavNet TZtouch3 (v3+ software) NavNet TZT2BB (v9+ software) Power Supply 12-24 VDC Power Consumption 3.0-1.6 A Protection Level IP55 Dimensions 15 x 4.72 x 11.78 in Weight 7.94 lbs What's in the Box: DFF3-UHD Network Fish Finder 000-197-092-10 Cable FRU-3P-FF-A002M-001 001-167-890-10 LAN Cable 000-162-608-10 Self-Tapping Screw 5x20 x 4 000-199-317-10 EMI Core GRFC-8 IME-204-10Z Installation Manual

  Read more less

  $1,995.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno DI-FFAMP TruEcho CHIRP Fish Finder Amplifier

  Furuno DI-FFAMP "Deep Impact" TruEcho CHIRP Fish Finder AmplifierModel: DI-FFAMPYou spoke. We listened. And now we delivered! TZtouch3 incorporates a powerful internal 1kW TruEcho CHIRP™ Fish Finder. For many, this is the perfect Fish Finder, but for some, they need even more. So, we proudly bring you Deep Impact (DI-FFAMP), a high-powered 2kW/3kW amplifier that connects to the internal TruEcho CHIRP™ Fish Finder. But if that's not enough, Deep Impact allows you to connect a 5kW or 10kW transducer with the BT-5. Go big or go home!Deep Impact boosts your power to a 2/3 kW CHIRP Fish Finder. High-powered TruEcho CHIRP™ ensures that your echoes come back strong & clear at every depth range, displaying fish targets and bottom structure with amazing clarity.Specifications Power useage 12-24vDC Power output 2 kW - 3 kW

  Read more less

  $1,995.00

  Quantity Add to cart

• 

  View options

  Furuno Furuno DFF3D Multi-Beam Sonar Module

  Furuno DFF3D Sonar ModuleModel: DFF3D Sidebar detection range is over 650 ft (200 m) in a 120-degree swath port and starboard direction Deep water, main beam penetration directly under the boat is over 1,000 ft. (350 m), depending on water conditions Rich set of menus in each display mode The built-in motion sensor (standard supply) stabilizes the display to give clear and stable images even under rough sea conditions Thru-hull or Transom mount transducers available Customize the display according to your needs - Depending on the situation and preference, a combination of screen modes can be displayed Turn your NavNet TZtouch or TZtouch2 MFD into a multi-beam sonar that can see 120-degrees port to starboard, allowing you to see the depth and direction fish schools are moving, while displaying the seabed condition in real time. The new DFF3D gives you real-time 120 port-starboard view of the water column and seabed in over 650 feet. The DFF3D allows you to explore fishing spots and find fish in deep water far faster than conventional single beam sounders. The main beam penetrates right under the boat at a depth of over 1,000 feet, depending on water conditions. Installation is made easy thanks to a compact transducer design. The built-in motion sensor in the transducer stabilizes the display to give clear and stable images, even under rough sea conditions.Cross-Section displays the real-time sea column echo in 120 degrees port and starboard. This mode aids in instantly understanding the distribution of bait fish and water column conditions.The 3D Sounder History provides an intuitive and easy-to-understand 3D image of the seafloor, along with fish school icons. This mode is useful in a variety of situations, such as selecting fishing hotspots and assessing the seabed condition.A single (directly under the boat) or triple-direction (middle, left and right) fish finder image can be displayed. The triple beam display helps to understand the depth of fish targets and the seabed condition in each direction, as well as the direction target fish are moving. Each beam angle and beam width are selectable.Side scan clearly displays the shape of structure as a high definition image in port and starboard direction. It is suitable for searching the seabed and understanding sea floor structure.Specifications General Transmit Frequency 165 kHz Output power 800 watts Minimum range 3 meters Basic range 5-1200 meters Detection range 200m Side beam best performance300m Main beam directly under boatDepending on botom, water and installation Beam angle for triple beam sounder 20-50 degrees from right under Display mode Triple/singlebeam sounder, Side Scan, Cross section, 3D sounder history Interface LAN 1 port, ethernet 10/100base-TX External KP 1 port (optional external KP ki required) Power Supply Coltage 12-24vDC Current draw 1.4/0.7 Amps What's in the Box: DFF-3D Multibeam Network Sonar Fuse FGBO 5A x 2 M5 x 20 Tapping Screw x 4 Network Cable 5M Power Cable Assy Crimp Lug Red 1.25 Conductive Tape Operator's Manual

  Read more less

  $1,995.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno DFF3-UHD High-Power TruEcho CHIRP Black Box Fishfinder f/NavNet TZouch3 NavNet TZtouch2 TZT2BB [DFF3-UHD]

  DFF3-UHD High-Power TruEcho CHIRP Black Box Fishfinder for NavNet TZouch3 & NavNet TZtouch2 TZT2BBGo deeper with more power than you thought was possible. The DFF3-UHD High-Powered TruEcho CHIRP Fish Finder delivers the ability to see fish and bottom structures deeper and clearer than ever before. Furuno’s superior digital signal processing interprets the echoes from fish and underwater structures with unparalleled clarity, accuracy, and resolution at unprecedented depths - we're talking depths down to 15,000 feet! Capable of transmitting across Low, Medium, and High CHIRP ranges, its high power output translates directly into greater resolution and depth capability than a comparably powered standard Fish Finder.Plenty of power and a wide frequency range to Go Deep! The DFF3-UHD provides an incredible 2kW or 3kW of power to a compatible broadband transducer, transmitting across a spectrum of frequencies to ensure that the echo returns on your display come back sharp and clear at every range. Gathering more and higher-quality data than traditional high-power CW Fish Finders, the DFF3-UHD provides significant advantages in signal clarity and target definition. This helps you find more of your target species, game fish and baitfish, even when they are tightly schooled together or near the seafloor. The DFF3-UHD transmits and receives pulses across a combination of Low, Medium, or High frequency ranges with each transmission, showing returns from bait balls and individual fish targets virtually anywhere in the water column.Features: 2kW or 3kW Power Output Transmits across Low, Medium, and High CHIRP frequency ranges High Power = greater resolution and depth capability at all ranges Compatible with NavNet TZtouch3 as well as NavNet TZtouch2 TZT2BB Black Box MFD Gathers more expansive and higher-quality data than comparable tone pulse Fish Finders Find and catch more of your target species, game fish and baitfish, even when they're tightly schooled or near the seafloor A-Scope feature and programmable Fish, Depth, or Temp Alarms Enhanced automatic cruising or fishing modes to suit your style of boating Specifications: Frequency: CHIRP 25-242kHz Power Usage: 12-24VDC Power Output: 2kW-3kW Range: 5000M This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

  Read more less

  $1,995.00

  Quantity Add to cart

• 

  View options

  Furuno Furuno Deep Impact DI-FFAMP High Power TruEcho CHIRP Fishfinder Amplifier [DI-FFAMP]

  Deep Impact DI-FFAMP High-power TruEcho CHIRP™ Fishfinder AmplifierThe “Deep Impact” DI-FFAMP, a new, high-power TruEcho CHIRP™ Fish Finder Amplifier, designed specifically to work with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. Deep Impact boosts your power to a 2/3 kW CHIRP Fish Finder. But if that’s not enough, Deep Impact allows you to connect a 5kW or 10kW transducer with the BT-5. The system marries CHIRP and CW signals to ensure that as you go deeper, your echoes come back strong and clear.Features: Works with TZtouch3 Internal Fish Finder to amplify it to a 2/3kW TruEcho CHIRPTM Fish Finder Capable of using a 5kW or 10kW transducer (BT-5 required, actual output power from DI-FFAMP is 3kW) Utilizes both CHIRP and CW signals to ensure strong and clear signals in deep water 2 Channel TruEcho CHIRP, 18-225kHz with a maximum depth of 3,000 meters This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,995.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno DFF3D Multi-Beam Sonar f/NavNet TZtouch TZtouch2 [DFF3D]

  DFF3D Multi-Beam Sonar for NavNet TZtouch & TZtouch2Turn your NavNet TZtouch or TZtouch2 MFD into a multi-beam sonar that can see 120-degrees port to starboard, allowing you to see the depth and direction fish schools are moving, while displaying the seabed condition in real time. The DFF3D gives you real-time 120 port-starboard view of the water column and seabed in over 650 feet. The DFF3D allows you to explore fishing spots and find fish in deep water far faster than conventional single beam sounders. The main beam penetrates right under the boat at a depth of over 1,000 feet, depending on water conditions. Installation is made easy thanks to a compact transducer design. The built-in motion sensor in the transducer stabilizes the display to give clear and stable images, even under rough sea conditions.Cross-Section displays the real-time sea column echo in 120 degrees port and starboard. This mode aids in instantly understanding the distribution of bait fish and water column conditions.The 3D Sounder History provides an intuitive and easy-to-understand 3D image of the seafloor, along with fish school icons. This mode is useful in a variety of situations, such as selecting fishing hotspots and assessing the seabed condition.A single (directly under the boat) or triple-direction (middle, left and right) fish finder image can be displayed. The triple beam display helps to understand the depth of fish targets and the seabed condition in each direction, as well as the direction target fish are moving. Each beam angle and beam width are selectable.Side scan clearly displays the shape of structure as a high definition image in port and starboard direction. It is suitable for searching the seabed and understanding sea floor structure.Features: Sidebar detection range is over 650 ft (200 m) in a 120-degree swath port and starboard direction Deep water, main beam penetration directly under the boat is over 1,000 ft. (350 m), depending on water conditions Rich set of menus in each display mode The built-in motion sensor (standard supply) stabilizes the display to give clear and stable images even under rough sea conditions Thru-hull or Transom mount transducers available Customize the display according to your needs - Depending on the situation and preference, a combination of screen modes can be displayed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

  Read more less

  $1,995.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno FI70DSW Package Depth/S Depth/Speed/Wind System

  Furuno FI70DSW Depth/Speed/Wind Bundle Model: FI70DSW Furuno's professionally designed FI70 instrument series is designed to meet the needs of sail boaters and power boaters alike. The FI70DSW package offers a solution to boaters looking for an economical solution to display Water Depth and vessel speed, as well as wind speed and direction. The FI70DSW package consists of the FI5001 Wind Sensor, DST-800PSF Digital Depth/Speed/Temp sensor, and two FI70 Digital Data Displays. The package includes the IF-NMEAFI Analog to NMEA2000 data converter as well as the FI5002 Junction Box for a simple installation and full compatibility with other navigation equipment. Whether you use these instruments by themselves or as a part of your NavNet system, the FI70DSW will add both function and beauty to your helm. The FI5001 is an analog Wind Transducer capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The DST-800PSF operates at 235kHz and provides Depth and Speed Through Water, as well as Temperature accuracy within a single degree. What's in the Box: FI70 X 2 FI5002 IF-NMEAFI DST-800PSF FI5001/30M

  Read more less

  $1,945.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno FI70DSW Depth/Speed/Wind FI70 Package [FI70DSW]

  Furuno FI70DSW Depth/Speed/Wind FI70 PackageOur professionally designed FI70 instrument series is designed to meet the needs of sail boaters and power boaters alike. The FI70DSW package offers a solution to boaters looking for an economical solution to display Water Depth and vessel speed, as well as wind speed and direction.The FI70DSW package consists of the FI5001 Wind Sensor, DST-800PSF Digital Depth/Speed/Temp sensor, and two FI70 Digital Data Displays. The package includes the IF-NMEAFI Analog to NMEA2000 data converter as well as the FI5002 Junction Box for a simple installation and full compatibility with other navigation equipment. Whether you use these instruments by themselves or as a part of your NavNet system, the FI70DSW will add both function and beauty to your helm.The FI5001 is an analog Wind Transducer capable of detecting wind angle accuracy of better than q10x and wind speed accuracy of better than +/-5% (20 kt). The DST-800PSF operates at 235kHz and provides Depth and Speed Through Water, as well as Temperature accuracy within a single degree.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Instrument Function: Multifunction Box Dimensions: 12"H x 18"W x 18"L WT: 15.4 lbs UPC: 611679362711

  Read more less

  $1,945.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno DRS4DL+ 19" 4Kw Dome Cable Sold Separately effective 06/20/2022

  Furuno DRS4DL+ 19" UHD 4kW Radar Dome No CableModel: DRS4DL+Signal Cable not included as of 06/20/2022The DRS4DL+ is a , 19" dome Radar Sensor for NavNet TZtouch and NavNet TZtouch2. This 4kW Radar is presented in a compact, rugged 19" dome with a 5.2 degree horizontal beamwidth antenna. Furuno's automatic, real-time digital signal processing presents navigators with some of the clearest targets they'll ever find from a Radar of this compact size. The DRS4DL+ utilizes a wired connection with NavNet TZtouch and TZtouch2. In combination with the TZTL12F/15F, this single-wire solution results in a very simple installation.The DRS4DL+ spins at a fixed 24RPM, and has range scales from 1/8 nm to 36 nm. The DRS4DL+ is designed to work with NavNet TZtouch and TZtouch2 systems. It is not compatible with NavNet 3D.Fast Target Tracking (TT) / ARPA on the DRS4DL+ manually or automatically acquires and tracks 10 targets*. After selecting a target, it only takes a few seconds for a speed and course vector to be displayed. With accurate tracking information, estimation of other vessel's course and speed is made simple.Specifications Antenna Size 19 inches Band X-Band Antenna Type Radome Beam Width 5.2 degrees Power Output 4 kW What's in the Box: DRS4DL+-DOME Mounting Hardware Mounting Template Installation Manual

  Read more less

  $1,918.69

  Quantity Add to cart

• 

  View options

  Furuno Furuno 165T-SS54 Stainless Steel Thru-Hull Transducer f/DFF3D Sounder [165T-SS54]

  165T-SS54  Stainless Steel Thru-Hull Transducer for DFF3D SounderStainless Thru-Hull Multi-Beam TransducerThe 165T-SS54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images.Features: Stainless Steel Thru Hull with high speed fairing block Can be flush mounted in keel without using fairing block DFF3D operating frequency:  165 kHz  2 x 10M Cables: Bare ended cable for DFF3D sonar and 7-pin connector for the motion sensor Compact design Built-in motion sensor Built-in temp sensor WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,900.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno Transom Mount Multi-Beam Transducer [165T-TM54]

  Transom Mount Multi-Beam TransducerThe 165T-TM54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images.Features: Transom mount with stainless steel kick-up bracket DFF3D operating frequency: 165 kHz 2 x 10M Cables Bare ended cable for DFF3D sonar 7 pin connector for the motion Built-in motion sensor Built in temp sensor WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,900.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno Thru-Hull Multibeam Transducer f/DDF3D [165T-B54]

  Thru-Hull Multibeam Transducer f/DDF3DThe 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,900.00

  Quantity Add to cart

• 

  View options

  Furuno Furuno Interface Kit NavPilot 700 Series to Yamaha Helm Master [FAP6310]

  Interface Kit NavPilot 700 Series to Yamaha Helm Master The FAP6310 is an optional interface kit that can be connected to the NavPilot 700 series, allowing it to control the Yamaha Helm Master system. The Yamaha Helm Master system consists of an NMEA2000 based network called EVC (Electric Vessel Control), and the system is controlled electrically. The NAVpilot 700 is interfaced with the EVC via two units: Autopilot Gateway and Interface Unit. The Autopilot Gateway and Interface Unit make up the FAP6310.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 5"H x 9"W x 19"L WT: 3 lbs UPC: 611679357212

  Read more less

  $1,900.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno DRS4DL+ Radar Dome, 4kw, 19" 36NM [DRS4DL+]

  DRS4DL+ Radar Dome, 4kw, 19" 36NMThe DRS4DL+ is a , 19" dome Radar Sensor for NavNet TZtouch and NavNet TZtouch2. This 4kW Radar is presented in a compact, rugged 19" dome with a 5.2 degree horizontal beamwidth antenna. Furuno's automatic, real-time digital signal processing presents navigators with some of the clearest targets they'll ever find from a Radar of this compact size. The DRS4DL+ utilizes a wired connection with NavNet TZtouch and TZtouch2. In combination with the TZTL12F/15F, this single-wire solution results in a very simple installation.The DRS4DL+ spins at a fixed 24RPM, and has range scales from 1/8 nm to 36 nm. The DRS4DL+ is designed to work with NavNet TZtouch and TZtouch2 systems. It is not compatible with NavNet 3D.Fast Target Tracking (TT) / ARPA on the DRS4DL+ manually or automatically acquires and tracks 10 targets*. After selecting a target, it only takes a few seconds for a speed and course vector to be displayed. With accurate tracking information, estimation of other vessel's course and speed is made simple. *heading sensor requiredFeatures: Compact 19" 4kW / 24 RPM / 36NM UHD Radome 5.2° horizontal / 25° vertical beamwidth Ultra-High Definition (UHD) Digital Radar delivers crystal-clear targets "Fast Target Tracking" TT / ARPA provides heading and speed for up to 10 targets (*heading sensor required) Advanced auto-adjust settings for Gain/Sea Clutter/Rain Clutter Requires signal cable optional ( see accessories) 12-24 VDC supplied by ship's mains (no PSU required) Lightweight 5.7kg/12.5lbs design Low power consumption: 23 Watt TX / 10 Watt STBY IPX6 waterproofing & -25°C to 55°C environmental rating Compatible with NavNet TZtouch (v5.01 or higher) & TZtouch2 (v5.02 or higher) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Array Size (Inches): 19" Power - Output: 4kW Range - Max (Miles): 36nm Box Dimensions: 11"H x 21"W x 21"L WT: 17.8 lbs UPC: 611679372024

  Read more less

  $1,895.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno TM275LHW-12P Transom Transducer Low/High Wide 12Pin

  Airmar TM275C-LHW Transom Mount Low/High Wide CHIRP Transducer with 12-PinModel: TM275CLHW-12P Depth & fast-response water-temperature sensor Low - CHIRPS from 42 kHz to 65 kHz - 25° to 16° beamwidth High - CHIRPS from 150 kHz to 250 kHz - 25° constant beamwidth 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.A unique property of the new high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.Specifications Hull deadrise up to 28° Acoustic window Urethane What's in the Box: TM-275C LHW 12 pin Transom Mount Bracket and Hardware 3 - 3deg Shims

  Read more less

  $1,865.34

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno 455T-PR903 Side-Scan Thru-Hull Transducer Pair

  Furuno 455T-PR903 455kHz Paired Thru-Hull Side-Scan TransducerModel: 455T-PR903 150 watts on each side CHIRP 445-465kHz Stainless Steel Thru-Hull with Temperature 12-pin connector 12m (40ft) cable The 455T-PR903 is a set of paired Thru Hull transducers that work with the built-in CHIRP Side-Scan functionality on your NavNet TZtouchXL TZT10X, TZT13X, or TZT16X MFD.

  Read more less

  $1,836.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno 225T-PR904 Side-Scan Thru-Hull Transducer Pair

  Furuno 225T-PR904 Side Scan thru-Hull Transducer PairModel: 225T-PR904 150 watts on each side CHIRP 220-240kHz Stainless Steel Thru-Hull with Temperature 12-pin connector 12m (40ft) cable The 225T-PR904 is a set of paired Thru Hull transducers that work with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.

  Read more less

  $1,836.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno TM275LHW Transom Mount CHIRP Transducer w/Temp - 12-Pin Connector f/TZT3 [TM275LHW-12P]

  TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.The TM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.Features: Plastic Transom Mount CHIRP Transducer with Temp Low Freq: 42-65 kHz High Freq: 150-250 kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,800.00

  Quantity Add to cart

• 

  View options

  Furuno Furuno DFF3-UHD Reman High-Power TrueEcho CHIRP Black Box Fish Finder

  Furuno DFF3-UHD High-Power TruEcho CHIRP Black Box Fish Finder for NavNet TZouch3 and NavNet TZtouch2 TZT2BB w/5M LAN Cable, Less Transducer - RemanufacturedModel: DFF3-UHD Reman 2 kW or 3 kW Power Output Transmits across Low, Medium, and High CHIRP frequency ranges High Power = greater resolution and depth capability at all ranges Compatible with NavNet TZtouch3 as well as NavNet TZtouch2 TZT2BB Black Box MFD Gathers more expansive and higher-quality data than comparable tone pulse Fish Finders Find and catch more of your target species, game fish and baitfish, even when they're tightly schooled or near the seafloor A-Scope feature and programmable Fish, Depth, or Temp Alarms Enhanced automatic cruising or fishing modes to suit your style of boating The DFF3-UHD High Power TruEcho CHIRP™ Fish Finder for NavNet TZtouch3 delivers the ability to see fish and bottom structure deeper and clearer than ever before. Furuno’s superior digital signal processing interprets echoes from fish and underwater structures with unparalleled clarity, accuracy, and resolution, at unprecedented depths - we’re talking maximum depth scales down to 15,000 feet!Specifications TX Type Dual Band CHIRP and CW Output Power CHIRP: Max. 3 kWCW: 2/3 kW Max. Range Scale 15,000 ft Frequency 25 to 242 kHz BT-5 for 5/10 kHz CW Transducer Compatible Interconnection Connect to MFD Network via Ethernet Networked MFDs NavNet TZtouch3 (v3+ software) NavNet TZT2BB (v9+ software) Power Supply 12-24 VDC Power Consumption 3.0-1.6 A Protection Level IP55 Dimensions 15 x 4.72 x 11.78 in Weight 7.94 lbs What's in the Box: DFF3-UHD Network Fish Finder - Remanufactured 000-197-092-10 Cable FRU-3P-FF-A002M-001 001-167-890-10 LAN Cable 000-162-608-10 Self-Tapping Screw 5x20 x 4 000-199-317-10 EMI Core GRFC-8 IME-204-10Z Installation Manual

  Read more less

  $1,753.11

  View options

• 

  View options

  Furuno Furuno PUMPHRP35-24 24v Pump 0-3.5 CU IN/SEC ADJ

  Furuno PUMPHRP35-24 0-3.5 cu in/sec Adjustable 24v PumpsetModel: PUMPHRP35-24The Accu-Steer HRP35 is a reversing pump unit designed to interface a hydraulic steering system with electric or autopilot control. The output flow rate of the HRP35 pumpset is adjustable from 0 cu in/per second to 3.5 cu in/second. The output of the reversing pumpset determines the speed of the steering cylinderSpecifications Voltage 24vDC Output/Sec 0-3.0 cui/sec neutral Amps 3

  Read more less

  $1,728.00

  View options

• 

  View options

  Furuno Furuno 455T-PR903 Side-Scan Transducer Pair Thru-Hull f/TZtouchXL Series [455T-PR903]

  Over $4,000 in Savings w/Qualifying Furuno Purchases UNTIL 06/30/2025 VIEW455T-PR903 Side-Scan Transducer Pair Thru-Hull for TZtouchXL SeriesThe 455T-PR903 is a set of paired Thru-Hull transducers that work with the built-in CHIRP Side-Scan functionality on your NavNet TZtouchXL TZT10X, TZT13X, or TZT16X MFD.Features: 150 watts on each side CHIRP 445-465kHz Stainless Steel Thru-Hull with Temperature 12-pin connector 12m (40ft) cable Specifications: Frequency: CHIRP 445-465 kHz Housing Type: Stainless Steel Install Type: Thru-Hull This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,700.00

  View options

• 

  View options

  Furuno Furuno Side Scan Paired Thru-Hull Transducers f/TZT3 [225T-PR904]

  Over $4,000 in Savings w/Qualifying Furuno Purchases UNTIL 06/30/2025 VIEWSide Scan Paired Thru-Hull Transducers for TZT3The 225T-PR904 is a set of paired Thru-Hull transducers that work with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.Features: 150 watts on each side CHIRP 220-240kHz Stainless Steel Thru-Hull with Temperature 12-pin connector 12m (40ft) cable Specifications: Install Type: Thru-Hull Housing Type: Stainless Steel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 40 Mounting Style: Thru-Hull Pins: 12 Temperature: Yes Box Dimensions: 11"H x 13"W x 16"L WT: 13.1 lbs UPC: 611679399809

  Read more less

  $1,700.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno XN13A 6' Antenna

  $1,695.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno NAVPILOT300 Autopilot Requires Pump, Heading Sensor

  Furuno Navpilot 300 Autopilot, requires Drive and Heading InputModel: NAVPILOT 300 1-DIN 4.1" IP56 Waterproof Color Display (2 more Control Heads can be added) Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunter Pigtail cable design for simplified installation NMEA2000 Certified System (includes output of Heartbeat PGN) Self-learning adaptive software Bluetooth Gesture Controller (GC001) included as standard supply The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!The SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).What's in the Box: FAP3011 - Control Unit FAP3012 - Processor GC001 - Gesture Controller

  Read more less

  $1,695.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno DFF1-UHD Chirp Sounder Low Or High No Medium Freq

  Furuno DFF1-UHD Chirp SounderLow Or High. No Medium frequencyModel: DFF1U-HDDesigned to operate over a wide range of frequencies utilizing a broadband transducer, the new DFF1-UHD TruEcho CHIRP-enabled network sounder for NavNet TZtouch and NavNet 3D delivers significant advancements in signal clarity and target definition. The clear presentation of the DFF1-UHD marks individual game fish and bait fish, even when tightly schooled together or very near the sea floor.Benefits of CHIRP sounders:Standard, non-CHIRP Fish Finders operate at one or two individual frequencies and are generally capable of detecting targets and displaying them only within those narrow frequency bands. CHIRP Fish Finders transmit pulses across a wide range of frequencies, allowing Furuno's superior digital signal processing (DSP) to display fish and structure targets with unparalleled clarity, accuracy and resolution.Typical Non-CHIRP Fish Finders operate with a maximum duty cycle of 1% meaning they transmit a voltage to the transducer no more than 1% of the time. Consequently the transmit pulse can be high power but very short duration, limiting the total energy that is transmitted into the water column.The DFF1-UHD uses a precise sweep pattern across 90 frequencies (50 kHz +/- 20 kHz, 200 kHz +/- 25 kHz) within a long-duration transmission. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional Fish Finder, resulting in more energy on target. The results are up to 5x greater resolution and depth capability than comparably powered, standard Fish Finders due to the advanced signal processing of the return echo.

  Read more less

  $1,695.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno NavPilot 300 Autopilot System - No Rate Compass [NAVPILOT 300]

  NavPilot 300 Autopilot System - No Rate CompassNavPilot 300 is not your ordinary Autopilot - The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.Gesture Control - just push, point and shoot!The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!Versatile Display Modes on a vivid 4.1" Color LCD DisplayThe SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).Features: 1-DIN 4.1" IP56 Waterproof Color Display (2 more Control Heads can be added) Full control from NavNet TZtouch, TZtouch2 & the all-new GP1871F/GP1971F Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunter Pigtail cable design for simplified installation NMEA2000 Certified System (includes output of Heartbeat PGN) Self-learning adaptive software Built-in simulator and slide show Bluetooth Gesture Controller (GC001) included as standard supply Targeted for center console outboards and drive-by-wire systems on small to mid-sized boats. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Hydraulic Box Dimensions: 7"H x 12"W x 22"L WT: 8.75 lbs UPC: 611679372031

  Read more less

  $1,695.00

  Quantity Add to cart

• 

  View options

  Furuno Furuno DFF1-UHD TruEcho CHIRP Sounder Module [DFF1-UHD]

  DFF1-UHDFish Might Call It "The Triple Threat"!Designed to operate over a wide range of frequencies utilizing a broadband transducer, the new TruEcho CHIRP-enabled network sounder DFF1-UHD delivers significant advancements in signal clarity and target definition. The clear presentation of the DFF1-UHD marks individual game fish and bait fish, even when tightly schooled together or very near the sea floor.Benefits of CHIRP sounders:Standard, non-CHIRP Fish Finders operate at one or two individual frequencies and are generally capable of detecting targets and displaying them only within those narrow frequency bands. CHIRP Fish Finders transmit pulses across a wide range of frequencies, allowing Furuno's superior digital signal processing (DSP) to display fish and structure targets with unparalleled clarity, accuracy and resolution.Typical Non-CHIRP Fish Finders operate with a maximum duty cycle of 1% - meaning they transmit a voltage to the transducer no more than 1% of the time. Consequently the transmit pulse can be high power but very short duration, limiting the total energy that is transmitted into the water column.The DFF1-UHD uses a precise sweep pattern across 90 frequencies (50 kHz +/- 20 kHz, 200 kHz +/- 25 kHz) within a long-duration transmission. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional Fish Finder, resulting in more energy on target. The results are up to 5x greater resolution and depth capability than comparably powered, standard Fish Finders due to the advanced signal processing of the return echo.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

  Read more less

  $1,695.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno XN13A/6 6 Foot Open Array [XN13A/6]

  The XN13A/6 is a 6' Open Array Antenna that has a horizontal beam width of 1.2.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Array Size (Inches): 72" Box Dimensions: 9"H x 12"W x 73"L WT: 20 lbs UPC: 611679152633

  Read more less

  $1,695.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Furuno Furuno B175M/20 Transducer 85-135kHz 20 Deg Tilt 10-Pin

  $1,658.08

  Quantity Add to cart

• 

  View options

  Furuno Furuno FAP7002 Processor For 700 Series Autopilots

  This is a replacement processor box for the 700 series autopilots.

  Read more less

  $1,647.00

  View options

• 

  View options

  Furuno Furuno MCU001 Black Box Control Unit

  Furuno MCU004 Black Box Control UnitModel: MCU001 "Active Display" switching allows (1) MCU004 to control up to (4) TZtouch2 MFDs Joystick plus full RotoKey controller Edge-swipe plus cursor control for full menu access Home & brilliance control Pan & Zoom capability Shortcut function button Built-in alarm buzze Attached 3 meter USB cable for direct connection to MFD "STBY/AUTO" Autopilot engage/disengage With its sleek, piano-black finish, the MCU004 is a perfect cosmetic match for TZtouch2 MFDs. Its robust panel offers a perfect fit for many installations, from dashboards to the armrests of captain's chairs. The MCU004 includes a combined joystick and full-function RotoKey controller for zoom and/or menu control. It features large, easily-accessed, dual-function buttons ("short press" and "long press") for key features, such as Cursor or Scroll (panning), Home and Display Brilliance, and Vessel Center. It also includes a user-programmable Function Key that can be set to a favorite feature or functionThe MCU004 also functions as a virtual controller for NavPilot 700 installations when the autopilot is properly interfaced with the TZtouch2 network. Another attractive feature is an alarm buzzer so audible alarms can be heard in the cockpit.

  Read more less

  $1,620.00

  View options

• 

  View options

  Furuno Furuno PM265LH Bronze Pocket Mount CHIRP Transducer - 12-Pin [PM265LH-12P]

  PM265LH Bronze Pocket Mount CHIRP Transducer - 12-PinBronze, Pocket Mount CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 130-210 kHz.The PM265LH is a bronze CHIRP transducer with Temp for use with Furuno's CHIRP broadband Fish Finders.Its flat-faced design is ideal for pocket/keel-mount installations.Traditional marine Fish Finders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short-duration transmit pulses, and use narrowband sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine Fish Finder. The echo energy returning to the transducer is likewise superior to that generated by a conventional transducer. The combination of CHIRP, a broadband transducer, and Furuno’s superior Digital Signal Processing, results in dramatically increased fish and bottom detection.The PM265LH CHIRPS across the following bandwidths:  Low-Frequency: 42-65 kHz High-Frequency: 130-210 kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,600.00

  View options

• 

  Quantity Add to cart

  Furuno Furuno B265LH Bronze Thru-Hull CHIRP Transducer - 12-Pin [B265LH-12P]

  B265LH Bronze Thru-Hull CHIRP Transducer - 12-PinBronze, Thru-Hull CHIRP Transducer with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 130-210 kHz.The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno's CHIRP broadband Fish Finders. The B265LH comes complete with high-speed fairing blockTraditional marine Fish Finders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short-duration transmit pulses, and use narrowband sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine Fish Finder. The echo energy returning to the transducer is likewise superior to that generated by a conventional transducer. The combination of CHIRP, a broadband transducer, and Furuno’s superior Digital Signal Processing, results in dramatically increased fish and bottom detection.The B265LH CHIRPS across the following bandwidths:  Low-Frequency: 42-65 kHz High-Frequency: 130-210 kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,600.00

  Quantity Add to cart

• 

  View options

  Furuno Furuno B175M Bronze Thru-Hull 20 Tilt - Med Frequency [B175M/20]

  B175M Bronze Thru-Hull 20° Tilt - Med FrequencyFeatures: Frequency: Chirp 85-135 kHz Power Rating: 1KW Connector: 10 Pin Tilt: 20 Degree Deadrise of Hull: 16-24 Degrees This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $1,600.00

  View options

• 

  View options

  Furuno Furuno PM265LH Pocket/Keel Mount CHIRP Transducer [PM265LH]

  PM265LH (Low-High Frequency)Pocket/Keel Mount Depth & fast-response water-temperature sensor Low-CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth High-CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth 103 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Bronze transducer housing Hull Type: Fiberglass only CHIRP TECHNOLOGY 5 to 10 times greater detail and resolution 10 to 1,000 times more energy on targets Accuracy down to 3,000M (10,000') Precise separation between baitfish and game fish Superior performance in noisy environments Improved bottom tracking at high boat speeds WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Temperature: Yes Box Dimensions: 5"H x 8"W x 12"L WT: 11.3 lbs Brochure (pdf)

  Read more less

  $1,600.00

  View options

• 

  View options

  Furuno Furuno B265LH Thru-Hull CHIRP Transducer [B265LH]

  B265LH(Low & High-Frequency) Depth & fast-response water-temperature sensor Low-CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth High-CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth 103 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Bronze transducer housing with High-Performance Fairing Boat Size: 8M (25') and above Hull Type: Fiberglass or wood CHIRP TECHNOLOGY 5 to 10 times greater detail and resolution 10 to 1,000 times more energy on targets Accuracy down to 3,000M (10,000') Precise separation between baitfish and game fish Superior performance in noisy environments Improved bottom tracking at high boat speeds WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Temperature: Yes Mounting Style: Thru-Hull Box Dimensions: 7"H x 19"W x 26"L WT: 25 lbs UPC: 6116793520572 Owner's Manual (pdf)Brochure (pdf)

  Read more less

  $1,600.00

  View options

---

Show more products