Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer w/Temp - 4-PinGet ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer.This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle.Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pins: 4 Mounting Style: Transom Imaging: Standard/Down Chirp: Non Traditional Cable Length (Feet): 20' Temperature: Yes Speed Included: No Box Dimensions: 4"H x 7"W x 9"L WT: 1.4 lbs UPC: 753759152758

Read more less

Transom Mount Depth/Temp 50/200kHz - 8-PinThis plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units.The 500 W 8-pin transducer has a maximum depth of 1,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 40 to 10 degrees; and mounts on a 0 to 70 degree transom.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Mounting Style: Transom Imaging: Standard Chirp: No Cable Length (Feet): 30' Pins: 8 Box Dimensions: 3"H x 6"W x 7"L WT: 1 lbs UPC: 753759975364 Owner's Manual (pdf)

Read more less

Dual-Beam Transducer with Transom/Trolling Motor Mount for echo™ Series FishfindersWant to use your echo series fishfinder in more than one vessel? A second transducer can make the process a lot easier. It comes with all of the hardware you need to mount on your transom or trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Speed Included: No Temperature: Yes Pins: 4 Cable Length (Feet): 30' Chirp: No Imaging: Standard Mounting Style: Transom Box Dimensions: 3"H x 7"W x 7"L WT: 1.15 lbs UPC: 753759974183 Owner's Manual (pdf)

Read more less

Plastic transom mount transducer with depth and temperature. Operating frequency of 200 and 50 kHz. Beamwidth of 15 degrees at 200 kHz, 45 degrees at 50 kHz. Transducer kit comes with mounting hardware and installation instructions.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Transom Pins: 6 Temperature: Yes Cable Length (Feet): 30' Speed Included: No Imaging: Standard Chirp: No Box Dimensions: 3"H x 6"W x 8"L WT: 1.43 lbs UPC: 753759028206 Owner's Manual (pdf)

Read more less

8-pin plastic, transom mount transducer with depth and temp. Operating frequency of 200 and 50 kHz. Beamwidth of 10 degrees at 200 kHz, 40 degrees at 50 kHz. Transducer kit comes with mounting hardware and installation instructions.

Read more less

Plastic, transom mount transducer with depth and temp. Operating frequency of 200 and 50 kHz. Beamwidth of 10 degrees at 200 kHz, 40 degrees at 50 kHz. Transducer kit comes with mounting hardware and installation instructions.

Read more less

Freq. Khz Power Beam Width ( deg) LF//HF (-3dB) Max Depth (ft) Septh,Speed,Temp # of Pins Supported Deadrise / Transom Angles 77/200 500w 45/15 1900 Depth,Temp 8 0-70 deg transom

Read more less

Want to use your echoTM series fishfinder in more than one vessel - A second transducer can make the process a lot easier. It comes with all of the hardware you need to mount on your transom or trolling motor. Please Note: echo 100 is a single-beam fishfinder. When using this transducer with echo 100, it will only transmit and receive at the 200 kHz frequency.

Read more less

Garmin Dual Beam-IF ice fishing transducerModel: 010-13069-00Get crystal-clear images of fish from your spot on the ice with the Dual Beam IF ice fishing transducer1. It offers remarkable target separation, an operating frequency of 77/200 kHZ and a beamwidth of 15 or 45 degrees - making it easier to see more. It features a silicone-coated cable that remains flexible in harsh winter conditions. The kit includes a 4-pin transducer adapter cable, foam float and grommet.1 When paired with your compatible fishfinder or chartplotterWhat's in the Box: Dual Beam-IF transducer 4-Pin adapter Foam Float Grommet

Read more less

Garmin Fist Microphone 10 Meter Extension CableModel: 0101252303Give yourself a little room when using your compatible VHF radio with this 12-pin fist mic extension cable. Available in 3-meter (10-feet) and 10-meter (33-feet) lengths.

Read more less

Garmin Fist Microphone Relocation Kit (VHF 210/210i) Model: 010-12506-02 Use this kit to reposition your fist microphone for optimal usage with your compatible VHF radio.

Read more less

Garmin Heavy Duty Transducer Extension Cable 30 feet, 8-pinModel: 010-11617-54Extend the length of your compatible 8-pin transducer with this 30 ft cable.

Read more less

Garmin Powered MountFor GPSMAP86 SeriesModel: 010-12946-00Designed for one-handed, quick-release operation, this powered mount allows for easy grab-and-go accessibility with your compatible GPSMAP(R) 86 handheld. It uses the AMPS mounting pattern and includes an integrated cable with USB connection.

Read more less

Garmin Weedless propFor Force MotorsModel: 010-12832-01Designed for use on your trolling motor to push weeds away in areas with heavy vegetation.

Read more less

Garmin High-efficiency PropStandard Replacement PropModel: 010-12832-00Standard replacement prop for Force trolling motors.

Read more less

Garmin Magnetic Protective Cover for GPSMAP8X12Model: 010-12799-11Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this magnetic protective cover.

Read more less

Garmin GT20-TM HD-IDAnd DOWN-VU Transducer 4-PinModel: 010-01960-00UPC: 753759152758Perfect for the shallow water fisherman who want traditional and CHIRP ClearVü scanning sonar, this transom or trolling motor mounted transducer consistently displays fish arches as well as clear pictures of objects, structure and fish that pass below your boat.The 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (ClearVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (ClearVü); and a 0 to 70 transom angle.Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.SpecificationsTraditional77/200 ClearVü Chirp 455 kHz (435-475 kHz) & 800kHz (800-840 kHz) Power Traditional 500 W ClearVü 500 W Beamwidth Traditional 45 deg/15 deg ClearVü 2.5 degx53 deg@ 455 kHz and 1.6 degx29 deg @ 800 kHz Maximum depth Traditional 1,900 ft. ClearVü 750 ft. Depth/Speed/Temperature Depth and Temperature Number of pins 4-pin Cable length 20 ft. Supported deadrise/Transom angles 0 deg-70 deg degree transom

Read more less

Garmin GT20-TM Downvu77/200 455/800 DOWN-VU 8-PinModel: 010-01960-01UPC: 753759152765For the shallow water fisherman who wants traditional and CHIRP ClearVü scanning sonar, this transom or trolling motor mounted transducer consistently displays fish arches as well as clear pictures of objects, structure and fish that pass below your boat.The 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (ClearVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (ClearVü); and a 0 to 70 transom angle.Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.SpecificationsTraditional77/200 ClearVü CHIRP 455 kHz (435-475 kHz) & 800kHz (800-840 kHz) Power Traditional 500 W ClearVü 500 W Beamwidth Traditional 45 deg/15 deg ClearVü 2.5 degx53 deg@ 455 kHz and 1.6 degx29 deg @ 800 kHz Maximum depth Traditional 1,900 ft ClearVü 750 ft. Depth/Speed/Temperature Depth and Temperature Number of pins 8-pin Cable length 20 ft. Supported deadrise/Transom angles 0 deg-70 deg degree transom Input Voltage General

Read more less

Deck Mount Stabilizer KitUse this to stabilize your Force® Kraken Trolling motor when in the stowed position.

Read more less

12" Protective Cover - MagneticKeep your compatible GPSMAP 8000 series 12" device safe from the harsh marine environment, when not in use, with this magnetic protective cover.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 1"H x 8"W x 12"L WT: 0.75 lbs UPC: 753759219154

Read more less

Fist Microphone Relocation Kit - VHF 210/215Use our kit to reposition your fist microphone for optimal usage with your compatible VHF radio.3m cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 2"H x 5"W x 7"L WT: 0.6 lbs UPC: 753759168759

Read more less

Fist Microphone Extension Cable - VHF 210/210i & GHS 11/11i - 10MGive yourself a little room when using your compatible VHF radio with this 12-pin fist mic extension cable. Available in 10M (33') lengthWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 7"L WT: 1.2 lbs UPC: 753759194703

Read more less

60A Circuit BreakerUse this 60A circuit breaker when installing a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor Specifications: Amperage: 60a Box Dimensions: 1"H x 2"W x 3"L WT: 0.15 lbs UPC: 753759246495

Read more less

Electronics Control Unit (ECU) Power Cable, Threaded Collar - 2.5mProvide power to your electronic control unit (ECU) with Garmin's electronic control unit (ECU) power cable. Simply wire the electronic control unit (ECU) power cable to your boat battery as one of the last connections made during GHP™ installation.Compatible Devices: GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System with Smartpump WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 8"L WT: 1 lbs UPC: 753759102678

Read more less

Garmin White Round Nose Cone For Force MotorsModel: 010-12832-23Use this nose cone to replace the standard part or when mounting equipment with traditional clamps.

Read more less

Panoptix LiveScope™ Transducer Extension Cable - 3' - 21-PinExtend the length of a compatible LiveScope™ transducer cable.Specifications: Length: 3 ft. Compatible Devices: GLS™ 10 Sonar Module LiveScope™ Plus LVS34 LiveScope™ Plus System LiveScope™ System LiveScope™ XR LVS62 LiveScope™ XR System Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 8"L WT: 0.3 lbs UPC: 753759331184

Read more less

High-Speed HDMI CableUse this 15-foot cable to connect your compatible Garmin marine product to an HDMI device. The water-resistant and secure connection supports 4K video and audio playback. Refer to your device owner’s manual for more information on supported A/V features.

Read more less

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 0.8 lbs UPC: 753759142810

Read more less

Field Installable ConnectorsUse our waterproof male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on our gWindT family of transducers when stepping the mast.Compatible Devices: GND™ 10 Black Box Bridge gWind™ Race Transducer gWind™ Transducer gWind™ Wireless Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Garmin Bare Wire to 12-pin Sounder Wire Block Adapter Model: 010-11613-10 UPC: 753759142810 Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.

Read more less

Garmin High Speed HDMI CableModel: 010-12390-122Use this 15-foot cable to connect your compatible Garmin marine product to an HDMI device. The water-resistant and secure connection supports 4K video and audio playback. Refer to your device owner's manual for more information on supported A/V features.

Read more less

Garmin HDMI Cable (GPSMAP(R) 8400/8600)Model: 010-12390-20Connect your GPSMAP 8400 or 8600 series chartplotter to an high definition external video source, up to 1080p. The water resistant and secure connection allows you to watch a full HD video feed with audio right on your chartplotter's screen. The GPSMAP 8400/8600 supports watching videos in full or split screen from popular devices connected with this 15-foot HDMI cable to the HDCP-compliant HDMI input port. This also allows mobile device connectivity for mirroring or streaming audio and video from HDMI-connected devices, including mobile phones and tablets connected via external adapters or dongles. Audio playback on stereos typically requires NMEA audio cable. You can also output full HD from your chartplotter screen and associated audio to an additional monitor or TV through HDMI1.If using with a computer to gain touch control access, use with a USB cable (sold separately). Connect to DVI-D devices with standard DVI-to-HDMI adapters or cables (sold separately).1This will not allow display of HDCP-protected content on remote display

Read more less

Marine Network Cable - 50'Garmin's marine network cables offer additional cable lengths to help with installation. Various sizes are sold separately.

Read more less

HDMI Cable f/GPSMAP 8400/8600Connect your GPSMAP 8400 or 8600 series chartplotter to an high definition external video source, up to 1080p. The water resistant and secure connection allows you to watch a full HD video feed with audio right on your chartplotter’s screen. The GPSMAP 8400/8600 supports watching videos in full or split screen from popular devices connected with this 15-foot HDMI cable to the HDCP-compliant HDMI input port. This also allows mobile device connectivity for mirroring or streaming audio and video from HDMI-connected devices, including mobile phones and tablets connected via external adapters or dongles. Audio playback on stereos typically requires NMEA audio cable. You can also output full HD from your chartplotter screen and associated audio to an additional monitor or TV through HDMI¹.If using with a computer to gain touch control access, use with a USB cable (sold separately). Connect to DVI-D devices with standard DVI-to-HDMI adapters or cables (sold separately).¹This will not allow display of HDCP-protected content on remote displayWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

OTG Adapter Cable for GPSMAP® 8400/8600Charge USB devices from your GPSMAP® 8400 or 8600 series chartplotter with this 6-foot adapter cable. The waterproof and secure connection allows you to power an external device via USB, such as a phone or media player, from your Garmin chartplotter. You can also power your Chromecast or Roku - with a coupler and HDMI cable (sold separately) - and then stream video wirelessly to your chartplotter.Compatible Devices: GPSMAP® 8400 GPSMAP® 8600 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 0.8 lbs UPC: 753759976286 Owner's Manual (pdf)

Read more less

Garmin 6-pin Transducer to 8-pin Sounder Adapter Wire Block Model: 010-11613-00 This adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that require a 8-pin connection.

Read more less

Garmin Black Nose Cone, Large, GT54 and GT56 Transducer CompatibleModel: 010-12832-21Replace the standard part of your compatible trolling motors or use the nose cone to install a compatible Garmin GT model transducer, including GT22, GT24, GT52, GT54 and GT56. If you're rerouting a new transducer through the trolling motor shaft, the transducer replacement kit is recommended.

Read more less

Garmin Throttle Actuator LinkageModel: 010-12827-02These linkage parts connect the ReactorTM 40 Kicker autopilot throttle actuator to Honda, Yamaha(R), Mercury and Tohatsu carburated outboards. Suzuki outboards require a Suzuki linkage part (010-12826-04 sold separately). Yamaha EFI outboards require a Yamaha EFI Linkage Parts (010-12826-05 sold separately).

Read more less

Garmin Magnetic Protective Cover for GPSMAP8X10Model: 010-12799-10Keep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this magnetic protective cover.

Read more less

Garmin Fairing Block for GT56-THModel: 010-12224-03Use this fairing block to position your GT56 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise angle of your mounting location exceeds 5 degrees, you should use a fairing block to mount the device.

Read more less

Garmin 010-12224-01 Fairblock for GT21, GT41, GT50 and GT51 Series Model: 010-12224-01 UPC: 753759128135 Use this fairing block to position your GT21, GT41, GT50, GT51 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise angle of your mounting location exceeds 5 degrees, you should use a fairing block to mount the device.

Read more less