Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

No. 287 7/8" Round Rail MountProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all Scotty post mount rod holdersFits 7/8" round rails.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Swivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2.05 lbs UPC: 096811530720

Read more less

Baitcaster/Spinning Rod Holder without Mount Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top.*Comes with no mount, enabling you to choose whichever mount suits your needs separately.

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications: Mounting Style: Flush Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs UPC: 022697050144

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - BlackFeatures ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: Black Box Dimensions: 5"H x 5"W x 9"L WT: 0.5 lbs UPC: 857515002360

Read more less

Scotty's most popular value priced, positive locking, open style rod holder. It's universal cradle holds almost any reel style and has a front locking ring to prevent rod loss when travelling. Manufactured with fibre reinforced engineering grade nylon, the Powerlock offers strength, resilience and reliability. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811516526

Read more less

244 Flush Deck MountWith splash coverFor all Scotty post mount rod holdersDimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Read more less

259Rod Holder Height ExtenderIncrease your odds with easier access to your rod and reel. Extends the height of the rod holder by 6-1/2", allowing for faster access when that fish strikes. Made from super tough re-enforced nylon. Works with Scotty post mount rod holders (except No. 240 Striker)

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-2/3" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/8" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010638

Read more less

Flush Mount Rod Holder - 30 Degree - Black Liner - No LogoFeatures: 316L Stainless steel 1-5/8” Inner diameter Fits 2-3/16” hole diameter Cap size 4-1/2” long x 3-5/8” wide 9” Tube length 1/4” wide x 1/2” tall gimbal bar Cast models feature a 1/2” drain hole The liner runs the full length of the tube Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 4"H x 4"W x 14"L WT: 2 lbs UPC: 768296010805

Read more less

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability. Polished 316 grade stainless steel tube for corrosion-resistance Gasket Provides water seal around flange Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use U.V. resistant polymer liner protects finish on rod or reel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Length (Inches): 7-1/2" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs UPC: 022697663634

Read more less

289 R-5 Universal Rod Holder without MountThe R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.  The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.*Mount sold separatelyFeatures: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box:290 R-5 Rod Holder*Sold as an Individual Specifications: Construction: Plastic Box Dimensions: 1"H x 8"W x 10"L WT: 0.65 lbs UPC: 062017002897 Brochure (pdf)

Read more less

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:WhitePipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 2 lbs

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:BlackPipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811520233

Read more less

Flush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 14"L WT: 1.9 lbs UPC: 096811512900

Read more less

Rod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9 " Mounting Style: Surface Box Dimensions: 1"H x 6"W x 15"L WT: 1.75 lbs UPC: 096811530027

Read more less

Swivel Base Rod HoldersRH570Stainless Steel Side Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Bulkhead Box Dimensions: 5"H x 6"W x 13"L WT: 3.3 lbs UPC: 096811517004

Read more less

Swivel Base Rod HoldersRH575Standard Angle 30°Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 3.1 lbs UPC: 096811517509

Read more less

800A Series Rod HolderThis rod holder is constructed of anodized aluminum and stainless steel for use in all freshwater and saltwater environments. This is Panther's most popular rod holder. It will accept most heavy-duty trolling rods and is the choice of serious anglers and charter captains throughout the Great Lakes as well as the Pacific Northwest.Features: Panther Rod Holders are designed and manufactured by CMP Group, the world’s leading producer of state-of-the-art boating and fishing equipment Posi-LOCK technology – 25 and 45-degree angles For optimum fishing performance, Panther gives you a full 360-degree hemisphere of possible positions The mounting base on all Panther models can be easily removed from the unit with an Allen Wrench for storage Panther Rod Holders are precision-made out of rust-resistant stainless steel and aluminum for freshwater and saltwater fishing 10 in. depth for larger fishing rods Mounting hardware is included Specifications: Base Plate (inch): 2-3/4" Tube Diameter (inch): 1-3/4" Tube Depth (inch): 10" Specifications: Diameter (Inches): 1-3/4" Box Dimensions: 3"H x 7"W x 20"L WT: 1.7 lbs UPC: 836125098000 Quick Guide (pdf)

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):7/8" & 1" O.D. (Tube)Location:Bow RailsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 2.95 lbs UPC: 630838022136

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):1-1/16" & 1-5/16" O.D. (Pipe), 1-1/4" O.D. (Tube)Location:T-Top Ring, Leaning Posts, Poling PlatformsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 3.2 lbs UPC: 630838028534

Read more less

Flush Mount Rod HolderRH-530 Large 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 14"L WT: 2.6 lbs UPC: 096811513006

Read more less

Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 13"L WT: 3.2 lbs UPC: 096811517707

Read more less

Swivel Base Rod HolderRH577XLVertical 0° Extra Long TubeWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 16" Mounting Style: Flush Box Dimensions: 5"H x 7"W x 17"L WT: 4.2 lbs UPC: 096811517714

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513013

Read more less

Swivel Base Rod HoldersRH579Half Angle 15° Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.1 lbs UPC: 096811517905

Read more less

Close Ended Rod Holder with Hose Barb - Medium 15° - Stainless SteelFeatures: Close Ended  Medium 15° Standard 1/4" Round Pin Stainless Steel Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.6 lbs UPC: 096811530676

Read more less

Outrigger Rod Holder with Liner & Strap - AluminumFeatures: Strong, Stylish and Functional Includes Liner and Strap Aluminum Specifications: Mounting Style: Gunwale Length (Inches): 16" Finish: Polished Construction: Aluminum Box Dimensions: 3"H x 13"W x 24"L WT: 3.65 lbs UPC: 768296010348

Read more less

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.660" O.D. PipeColor:WhitePipe Size:#3Fits:1.660" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 5"H x 9"W x 12"L WT: 2 lbs UPC: 096811520561

Read more less

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Heavy Duty Stainless Steel Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Includes 241 Combination Side / Deck Mount. To use the new Scotty "lock-down" mount system, simply choose the best direction to fish from and insert the rod holder or accessory, pushing the post straight down into the mount. Can be mounted on top or side of gunnel.Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Designed for Muskie, Halibut, Sturgeon, and other big game fish. New stainless steel reinforced post, larger opening with easy lock / unlock ring.The inner support rotates with the rod to instantly remove and "strike" simultaneously. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

ORCA Rod HolderThe fastest rod release on any holder on the marketFibre reinforced engineering nylon, offers strength, resilience and reliabilityCompletely adjustable to multiple vertical and horizontal positions400 ORCA Rod Holder with 241L LOCKING push button combination side/deck mount

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

No. 355 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinFits 3/4" and 1" Scotty downrigger booms. Bolts through the boom

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 231Power Lock Rod Holder with No. 244 Flush Deck MountWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.3 lbs UPC: 062017002316

Read more less

253Gimbal MountAllows the use of Scotty rod holders with factory installed flush mounted rod holders.Fits 9" x 1-1/2" flush mountsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"

Read more less

5 Rod Aluminum Transom Mount Rod Holder - 35" Constructed of cold drawn anodized aluminum Includes white liners to protect your rod

Read more less

Triple Threat Three Pole Rod Holder - BlackThe Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!Features: Accessory Track Mounting System™ Scent bottle storage Four leashes and two bungee cord attachment points Built-in knife and plier holder Can accommodate up to 16 different fishing lures Accommodates rods up to 1-3/4 inch in diameter Installs with four #8 fasteners (included in display-packed product) Specifications: Color: Black Length (inch): 13-1/2” Height (inch): 10-3/4” Distance Between Screw Holes Horizontally (inch): 7” Distance Between Screw Holes Vertically (inch): 4-1/2” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 13-1/2" Box Dimensions: 3"H x 11"W x 14"L WT: 0.9 lbs UPC: 035514329972 Brochure (pdf)

Read more less

Triple Threat Three Pole Rod Holder - WhiteThe Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!Features: Accessory Track Mounting System™ Scent bottle storage Four leashes and two bungee cord attachment points Built-in knife and plier holder Can accommodate up to 16 different fishing lures Accommodates rods up to 1-3/4 inch in diameter Installs with four #8 fasteners (included in the display-packed product) Specifications: Color: White Length (inch): 13-1/2” Height (inch): 10-3/4” Distance Between Screw Holes Horizontally (inch): 7” Distance Between Screw Holes Vertically (inch): 4-1/2” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Finish: White Length (Inches): 13-1/2" Box Dimensions: 3"H x 11"W x 14"L WT: 0.9 lbs UPC: 035514329910 Brochure (pdf)

Read more less

Stand-Off Mount Rod HolderFeatures: White UV-Stabilized Polyethylene Front Access Hole & Integrated Stand-Offs for Easy Mounting Stainless Hardware Not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

King Fish Rod Holder - BlackBolt-on king fish rod holder. They are designed to be mounted under the hardtops, for King Fish. It's also great for Stripper Bass and running Mojos. Black to match some hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Read more less

Kite Fishing 3-Rod ClusterOne of the most useful fishing tools you can have when kite fishing is the TACO Marine Kite Fishing Rod Cluster, which allows you the freedom to place your kite fishing outfits in the perfect boat location. This three-rod cluster keeps everything close, tidy and easy to handle when the bite turns on.Features: 15° bent shaft for clearance Fits all standard gunnel mount rod holders Fish with multiple rods from one holder Includes form-fitted, anti-fungal PVC white liner Gimbal design for secure locking placement Sold individually Bag included 3-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less