Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.050 O.D. PipeColor: BlackPipe Size:#1Fits:1.050" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 096811500136 Quick Guide (pdf)

Read more less

Side Mount Rod Holder - Flat Dark EarthThis flush-mount rod holder can accommodate rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV-resistant injection-molded ABS. Installs with three 1/4" FH fasteners (not included).Specifications: Length (inch): 9-3/16" Diameter (inch): 1-5/8" Color: Flat dark earth Fastener (not included): 1/4" FH Weight: 0.40 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Diameter (Inches): 1-5/8" Length (Inches): 9-3/16" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 0.5 lbs UPC: 035514996167

Read more less

Side Mount Rod Holder - Flat Dark EarthThis side-mount rod holder features an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Constructed of injection-molded polypropylene. Installs with two #10 RH fasteners (not included).Specifications: Length (inch): 11-11/16" Diameter (inch): 1-3/4" Length Between Fasteners (inch): 6-1/4" Color: Flat dark earth Fastener: #10 RH Weight: 0.22 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Length (Inches): 11-11/16" Mounting Style: Side Box Dimensions: 4"H x 6"W x 15"L WT: 0.25 lbs UPC: 035514330046

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):1-11/16" & 1-15/16" O.D. (Pipe)Location:T-Top, Leaning Post & Poling Platform LegRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 3.6 lbs UPC: 630838022006

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-532VS/XS Large 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513211

Read more less

0 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.6 lbs

Read more less

30 Degree Large Fixed HD Rod HolderThis Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 30-degrees Material: Stainless steel Liner: White Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.25 lbs UPC: 784703001464

Read more less

0 Degree Large Fixed HD Rod HolderThis Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.3 lbs UPC: 784703001709

Read more less

15 Degree Large HD Swivel Rod HolderThis Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 15-degrees Material: Stainless steel Liner: White Size: large Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.85 lbs UPC: 784703001679

Read more less

Large Stainless Steel Bolt-less Swivel Rod Holder - 0°2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever!Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. These larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plastic 30° Rod & Cup Holder - Open - Oval Top - WhiteFeatures ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 9"L WT: 0.5 lbs UPC: 857515002131 Quick Guide (pdf)

Read more less

Narrow Gunnel Flush Mount Rod Holder - White These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: White Length (Inches): 10" Mounting Style: Flush Box Dimensions: 2"H x 6"W x 14"L WT: 0.3 lbs UPC: 035514326681

Read more less

Stainless Steel 0° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 0º Rod Angle Open at Bottom Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002124 Quick Guide (pdf)

Read more less

Flush Mount Rod Holder with Stainless Top The look you want at an economical price! This Flush Mount Rod Holder with Stainless Top is constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9-1/2" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 0.7 lbs UPC: 035514326384

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.66" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009731

Read more less