Stainless Steel 90° Flush Mount Rod Holder A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 8-1/4" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.15 lbs UPC: 035514325929

Read more less

Base Reducer - PairIf you currently have a set of TACO Marine outrigger poles from your GS-170 mounts, they can still be used if you upgrade your bases to our GS-280 or 380 series. Our TACO Outrigger Base Reducer is the perfect complement to allow your current poles to be used, by reducing the base without missing a beat.Features: Reduces Grand Slam base from 1-1/2" to 1-1/8" Allows the use of GS-170 Outrigger Poles with GS-200 and 300 Series Nylon, easy-to-install sleeve design 1-year Limited Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Rod Holder - Heavy Duty - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Surface Box Dimensions: 3"H x 6"W x 14"L WT: 2.6 lbs UPC: 096811530058

Read more less

Fish Stik - YellowFinally, a fish measurement board specialized for anglers in tight spaces. With limited space in the cockpit of a kayak, on the deck of a paddleboard, or in a gear bag when wade or bank fishing, the Fish Stik gives users back the fishing space by folding down and storing easily.The new design addresses the biggest problems with old-school measuring boards, poles, and tapes: it folds down to save space, and it floats. Stop compromising space and measurements. Get back to fishing; get back to measuring. At 36 inches long and folding to only 12 inches when stowed, The Fish Stik covers the full spectrum of necessity—from measuring trophy fish to stowing down under a raised seat, between tackle boxes, or in a storage crate.The Fish Stik also has a raised 3.5-inch bump board and line slot to improve measurement accuracy, increase angler efficiency, and minimize the stress on the fish. When measuring a fish off-the-line, hold the mouth/nose of the fish tightly against the bump board for the most accurate measurement.When measuring a fish on-the-line, the built-in line slot allows users to pull the line through the slot in the bump board and proceed with the measurement, uninterrupted by line adjustment.Features: 12 inches when stowed and 36 inches when expanded Easily store the Fish Grips Jr. inside the folded Fish Stik It comes with a marker for self-applied darkened measurement indicators for CPR photos and tournament submissions 1-year warranty Specifications:Color: YellowWarning: Do not add substantial weight to The Fish Stik, as the addition of weight may reduce its ability to float

Read more less

No. 350 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinIncludes No. 241 combination deck or side mount.Bolting dimensions: 1 5/16" x 3 3/16"

Read more less

Fishing Series HandlesThe Fishing Series handles are a unique new design that focus on the same quality as Shurhold?s original handles but also places emphasis on the handles aesthetic. The handles are sleek black with hand wrapped gold trim, and extra long foam fishing style grips for added comfort. This handle will match the look and feel of most fishing rods. The Fishing Series handle also features Shurhold?s exclusive SHUR-LOK quick release system which positively locks quickly and easily with any Shurhold accessory. 760FS - 5' (152 cm) Fixed Length HandleLightweight and convenient. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 61"L WT: 1.05 lbs UPC: 703485120484

Read more less

Top Gun Backing PlateSecure your new Top Guns with custom-designed backing plates made of anodized aircraft aluminum. These backing plates work with any bolt-in Top Gun or Z-30 outrigger bases. Needed when top thickness is not sufficient to support outrigger bases. Sold individually - 2 required. Specifications: Construction: Aluminum Product Class: Mounting Brackets Box Dimensions: 0"H x 6"W x 9"L WT: 0.62 lbs UPC: 784703000573

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 2-3/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009779

Read more less

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/4" square rail Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp Angle around the rail is infinitely adjustable Angle to the left or right adjusts in 15 degree increments 9" tall tube with 1-5/8" ID Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Rail Box Dimensions: 2"H x 8"W x 13"L WT: 1.9 lbs UPC: 768296008338

Read more less

Backing Plates For Grand Slam Outriggers (pair)Part #: BP-150BSY-320-1Specifically made for additional support for Grand Slam Outriggers when mounting to hard tops and gunnels. Made of Anodized Aluminum.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Aluminum Length (Feet): 6" Product Class: Mounting Brackets Box Dimensions: 2"H x 6"W x 8"L WT: 1.2 lbs UPC: 630838015428

Read more less

Grand Slam 170-2 Center Mount Uses TACO's spline lock technology for secure outrigger elevation Designed for use with standard 1-1/8" butt OD outriggers Locks every 18° Derlin bearings and stainless steel internal locking mechanism offer smooth adjustments, secure positioning and prevent movement Rugged, sure-grip knob adjusts and locks-in desired height & laydown position for safe trailering and navigation under bridges Stainless steel arm with locking feature ensures TACO outriggers remain securely in place This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-1/8" Finish: Silver Product Class: Mounting Brackets Box Dimensions: 7"H x 9"W x 12"L WT: 6.3 lbs UPC: 630838082710

Read more less

Side Mount 6 Rod HolderSide Mount Rod Savers are for vertical or horizontal applications. They are designed to hold rods and reels in a crisscross manner to enable more rods to be stored in a smaller space. Holds up to 4-6 Rods. 

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.050 O.D. PipeColor: BlackPipe Size:#1Fits:1.050" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 096811500136 Quick Guide (pdf)

Read more less

PVC Drain Cap f/Heavy Rod Holders 1/4" NPTPVC Drain Cap for Heavy Rod Holders - 1/4" NPT for hose barb Specifications: Construction: PVC Diameter (Inches): 2.25" Finish: White Box Dimensions: 1"H x 1"W x 1"L WT: 0.5 lbs UPC: 096811500020

Read more less

Double Premium Rigging Kit w/Black LineTacoSport Fishing Rigging Kits offer the angler everything needed for a great day of fishing with our wide range of outrigger poles. Our all-in-one kits make it easy for a full day of fishing. Ideal to use with TacoSport Fishing Grand Slam 280, 380 and 380XL along with our Tele-Outriggers.Kit includes: Rigs up to 22’ outriggers Single Roller Pulley Shock Cord w/Stainless Steel Snap Hook and Eye Insert 1/8" thick, 100’ or 200’ Dacron Rigging Cord in Black Adjustable Tension Release Clips 1-3/4" Outrigger Line Stops Pad Eye with Screws Double Sleeve Crimp Swivel Snap Swivel Quick Dry Mesh Bag One year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Performance Tool ComboThese are essential tools that every angler should have! 6" Mag Spring Pliers have magnets that keep the pliers open and ready. The Precision Line Scissors easily cut all your traditional fishing lines. The 6" Floating Fish Gripper, assists when landing and releasing your catch without harm to you or the fish.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Side Mount Rod Holder - Flat Dark EarthThis flush-mount rod holder can accommodate rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV-resistant injection-molded ABS. Installs with three 1/4" FH fasteners (not included).Specifications: Length (inch): 9-3/16" Diameter (inch): 1-5/8" Color: Flat dark earth Fastener (not included): 1/4" FH Weight: 0.40 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Diameter (Inches): 1-5/8" Length (Inches): 9-3/16" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 0.5 lbs UPC: 035514996167

Read more less

Side Mount Rod Holder - Flat Dark EarthThis side-mount rod holder features an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Constructed of injection-molded polypropylene. Installs with two #10 RH fasteners (not included).Specifications: Length (inch): 11-11/16" Diameter (inch): 1-3/4" Length Between Fasteners (inch): 6-1/4" Color: Flat dark earth Fastener: #10 RH Weight: 0.22 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Length (Inches): 11-11/16" Mounting Style: Side Box Dimensions: 4"H x 6"W x 15"L WT: 0.25 lbs UPC: 035514330046

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):1-11/16" & 1-15/16" O.D. (Pipe)Location:T-Top, Leaning Post & Poling Platform LegRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 3.6 lbs UPC: 630838022006

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-532VS/XS Large 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513211

Read more less

3-1/4" Dipsy Diver - Kelly Green/Silver Bottom Moon JellyThe special round shape and resulting multi-directional feature sets the Dipsy Diver® apart from all other divers and planers. A shift left or right, as indicated on the base plate, will cause the diver to track to port or starboard, allowing for large spreads of lures to be fished from a single boat. Users will cover more water when the Dipsy Divers are deployed.The adjustable trip mechanism can be set specifically for various lure sizes and the size of target fish.Features: Original directional design Heavy-duty welded ring construction It comes with one "O" Ring and an adjustable positive trip mechanism UV reflects more light energy, strengthening the Dipsy Diver®'s visibility Specifications: Diameter: 3-1/4 in. Running Depth: 35 ft. Weight: 2.53 oz Color: Kelly green/silver bottom Moon Jelly WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: Dipsy Diver Size: 3-1/4" Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs UPC: 049762647924 Quick Guide (pdf)

Read more less

Vortex® Speed 200 Jig - 6.25" - 7oz - SardineThe Williamson Vortex® Speed Jig is one of the most innovative and versatile jigs on the market today. The hydrodynamic design with opposing convex and concave sides allows the jig to rotate effortlessly on the fall. The rotation combined with the two-sided color pattern creates a maximum flash that drives fish crazy. Each jig is pre-rigged with a stainless steel ball-bearing swivel and a single VMC® Assist hook.Features: Each side has a separate finish, creating a unique visual effect and flash as the lure rotates and flutters during the fall Heavy heavy-duty ball-bearing swivel allows you to tie your line directly to the solid hook ring and let the lure swim freely Ultra-strong solid rings Premium VMC® hook Specifications: Color: Sardine Length: 6.25 in. Size: 200 Weight: 7 oz WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Size: 6.25" Box Dimensions: 1"H x 2"W x 9"L WT: 0.5 lbs UPC: 022677159607

Read more less

Vortex® Speed 300 Jig - 7.25" - 10.5oz - Black SilverThe Williamson Vortex® Speed Jig is one of the most innovative and versatile jigs on the market today. The hydrodynamic design with opposing convex and concave sides allows the jig to rotate effortlessly on the fall. The rotation combined with the two-sided color pattern creates a maximum flash that drives fish crazy. Each jig is pre-rigged with a stainless steel ball-bearing swivel and a single VMC® Assist hook.Features: Each side has a separate finish, creating a unique visual effect and flash as the lure rotates and flutters during the fall Heavy heavy-duty ball-bearing swivel allows you to tie your line directly to the solid hook ring and let the lure swim freely Ultra-strong solid rings Premium VMC® hook Specifications: Color: Black silver Length: 7.25 in. Size: 300 Weight: 10.5 oz WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Size: 7.25" Box Dimensions: 1"H x 3"W x 10"L WT: 0.7 lbs UPC: 022677159713

Read more less

Kensaki 280 Jig - 7.25" - 9-7/8oz - UV Chartreuse Glow ZebraThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: UV chartreuse glow Zebra Length: 7.25 in. Size: 280  Weight: 9-7/8 oz WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Size: 7.25" Box Dimensions: 1"H x 2"W x 12"L WT: 0.7 lbs UPC: 022677322544

Read more less

Kensaki 280 Jig - 7.25" - 9-7/8oz - UV SilverThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: UV silver Length: 7.25 in. Size: 280  Weight: 9-7/8 oz WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Size: 7.25" Box Dimensions: 1"H x 2"W x 12"L WT: 0.65 lbs UPC: 022677322568

Read more less

30 Degree Large Fixed HD Rod HolderThis Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 30-degrees Material: Stainless steel Liner: White Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.25 lbs UPC: 784703001464

Read more less

0 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.6 lbs

Read more less

0 Degree Large Fixed HD Rod HolderThis Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.3 lbs UPC: 784703001709

Read more less

15 Degree Large HD Swivel Rod HolderThis Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 15-degrees Material: Stainless steel Liner: White Size: large Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.85 lbs UPC: 784703001679

Read more less

Fishing Series HandlesThe Fishing Series handles are a unique new design that focus on the same quality as Shurhold?s original handles but also places emphasis on the handles aesthetic. The handles are sleek black with hand wrapped gold trim, and extra long foam fishing style grips for added comfort. This handle will match the look and feel of most fishing rods. The Fishing Series handle also features Shurhold?s exclusive SHUR-LOK quick release system which positively locks quickly and easily with any Shurhold accessory. 833FS - 6' (183 cm) Telescoping HandleQuickly locks at five different lengths from 40"-72" (101-183 cm). Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 43"L WT: 1.25 lbs UPC: 703485120460

Read more less

Lithium 40V Power AdapterA 40-volt battery isn't just for powering an auger. With this adapter, users can utilize the 40-volt battery to charge and operate a variety of electronic devices, like fish locators and portable LED light kits.Features: Lighted master power switch Works only with StrikeMaster's 40v battery Specifications: 2 USB-A Ports (Output): 5V at 1A Maximum 1 USB-C Port (Output): 5V at 1A Maximum Universal Positive and Negative Terminals (Output): 12V at 10A Maximum The Average Amount of Times a Device Can Be Charged from One Fully Charged 40V Battery: Smart Phone is 8 recharges, Tablet is 3 recharges, Laptop is 4 recharges, POV Camera is 250 recharges WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force Conservation Cull System Weight Kit - 3 Per PackWEIGHT ONLY- CLIP NOT INCLUDEDFeatures: Reduce Stress 2 oz Weight Increase chance of survival Stabilizes the bass without harming them More than 1 clip may be needed for larger fish Simple to use clip, attaches to the G-FORCE Cull Clip Works for Gen 1 and Gen 2 Conservation Culling System Package comes with 3 weights WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

832® Advanced Superline® Braid - 15lb - Coastal Camo - 3500 ydsSufix® 832® Advanced Superline® is the strongest, most durable small diameter braid on the market. R8 Precision Braiding and fiber technology provide superior strength, roundness, and line consistency. 832 Advanced Superline has 8 fibers (7 HMPE fibers plus 1 GORE® Performance Fiber) and 32 weaves (pics) per inch. GORE® Performance Fibers improve abrasion resistance, increase casting distance & accuracy and reduce line vibration. HMPE fibers provide high strength & sensitivity, hydrophobic water-repellent protection, and small diameter.Features: 8 Fibers (Featuring one GORE® Performance Fiber and 7 HMPE Fibers) 32 pics (weaves) per inch R8 Precision Braiding Technology Ultimate Abrasion Resistance Unbeatable Strength Proven Castability Improvements TPG™ Technology Enhances Color Retention WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 15 lb. Color: Blue Length: 3500 yds Series: 832 Box Dimensions: 5"H x 6"W x 6"L WT: 1 lbs UPC: 024777705791

Read more less

Large Stainless Steel Bolt-less Swivel Rod Holder - 0°2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever!Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. These larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rod Storage HolderHolds up to 3 fishing rods. Closed-cell foam insert protects rod. Mounts vertically or horizontally. 8-3/4" L X 2-1/2" W.

Read more less

Plastic 30° Rod & Cup Holder - Open - Oval Top - WhiteFeatures ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 9"L WT: 0.5 lbs UPC: 857515002131 Quick Guide (pdf)

Read more less

Grand Slam 170 Outrigger Top Mounts - 1-1/8" (Pair)Simple, strong and perfect for boats 24' and under, our Grand Slam 170 Outrigger Mounts are the ideal addition to make your boat into an offshore fishing machine. Their easy installation and attractive appearance will make your days on the water more productive.Features: Compatible with 1-1/8" Tele-Outrigger Poles Adds up to 30-feet of fishing spread Stainless-steel and Anodized Aluminum construction Sure-Grip knob allows lift adjustments every 18° Locking lever secures out-bound rotation to desired location Delrin bearings allow for smooth, secure operation Easy installation with the outrigger-ready mounting plates Sold in pairs 3-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-1/8" Mounting Style: Surface Product Class: Mounting Brackets Box Dimensions: 7"H x 9"W x 19"L WT: 12.5 lbs UPC: 630838081317

Read more less

Premium Rigging Kit - SingleNot only do the TACO Marine Premium Rigging Kits have all the necessary components to rig your outrigger poles without having to struggle knowing what to buy, they include all top-quality componentry to ensure peak performance every time. One tidy bag of rigging accessories and you're out the door.Features: Rigs up to 22' outriggers Single roller pulley shock cord with a stainless-steel snap hook and eye insert 1/8" thick, 100' Dacron black rigging cord Adjustable tension release clips 1-1/4" outrigger line stops Pad eye with screws Double sleeve crimp Snap swivel Quick-dry mesh bag 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Product Class: Rigging Box Dimensions: 1"H x 7"W x 10"L WT: 0.8 lbs UPC: 630838009953

Read more less

ProMix® Braid - 10lb - Neon Lime - 300 ydsCapitalizing on pro angler insights, Sufix® ProMix® combines the innate benefits of the premium braid with ultra-longevity, buoyancy, and colorfast technology to culminate a quality of braid like no other. The color injection process provides two times more “Colorfast” retention than competing braids. The densely braided line made with HMPE fibers and high weave count gives consistent quality, uniform diameter (increasing abrasion resistance), and line performance Low stretch offers exceptional lure control, ultimate bite detection, firm hook setting power Superior knot, and shock strength. Multi-purpose braid that excels in freshwater and saltwater applications.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 10 lb. Color: Lime Green Length: 300 yds Series: ProMix Braid Box Dimensions: 1"H x 4"W x 5"L WT: 0.15 lbs UPC: 024777734531

Read more less

G-Force Conservation Cull System Gen 2Features: Simplified Cull Clip Stainless Steel Spring Loaded One Hand Operation Removable Floats Color Coded Line Non-penetrating Clip Balance beam included 6 color-coded buoys Allows quicker culling- More fishing time! Uses a stronger plastic clip to hold tight around the lip Buoy holder for quick and easy storage of each Cull Ball WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Narrow Gunnel Flush Mount Rod Holder - White These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: White Length (Inches): 10" Mounting Style: Flush Box Dimensions: 2"H x 6"W x 14"L WT: 0.3 lbs UPC: 035514326681

Read more less

Foam Rod HoldersVersatile 6 Rod Storage Rack. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely.Features: Stores 6 rods neatly and securely Mount horizontally or vertically Foam grip pads Great for boats, RVs or garages Economical for boat rod lockers  Corrosion proof Durable and lightweight WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel 0° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 0º Rod Angle Open at Bottom Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002124 Quick Guide (pdf)

Read more less

Flush Mount Rod Holder with Stainless Top The look you want at an economical price! This Flush Mount Rod Holder with Stainless Top is constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9-1/2" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 0.7 lbs UPC: 035514326384

Read more less

Shur-Lok Adapters10" Curved Adapteradds a 30-degree angle to any of our SHUR-LOK equipped accessories. Two holes at the end provide for 180-degree rotation. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 3"W x 12"L WT: 0.2 lbs UPC: 703485101025

Read more less

Mr. Crappie Bait Blaster - Underwater Green LightFeatures: 18' Power Cable, weighted to maintain the desired depth range Green LED lights for maximum fish attraction 360-degree light output 180 LED design WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Universal Material: Polymer Watts: 6 Voltage - Input Range (Volts): 12 Color: Green Box Dimensions: 3"H x 7"W x 12"L WT: 1.2 lbs UPC: 733572093407

Read more less

Storage Rack - 3 Rod Constructed of injection molded polypropylene. These Rod Storage Racks feature soft foam inserts securing rods and reducing potential damage from rough seas. Installs with four #8 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Outrigger Line TensionerThe Taco Marine Outrigger Line Tensioner is designed for larger boats that are fishing with double or triple lines on each outrigger. Outrigger Line Tensioners have been around for years in many shapes and sizes and are ideal for large center consoles or sport fishing boats. The purpose and function is to keep the proper tension on the outrigger lines and maintain them fully extended and tight.Features: Stainless Steel Type 316 construction 18-8 Stainless Steel mounting hardware Quick and easy installation using 3/4” drill bit through the gunnel Mushroom head threaded bolt Adjustable for boats with 1” to 2-1/2” gunnel thickness Easy Ronstan medium cam cleat for 1/8” to 1/2” rope Heavy-duty lock washer to prevent loosening from excess vibration Electro polished bracket with countersunk mounting holes This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Product Class: Rigging Box Dimensions: 3"H x 4"W x 7"L WT: 0.8 lbs UPC: 630879088757 Brochure (pdf)

Read more less