Kensaki 280 Jig - 7.25" - 9-7/8oz - SpookyThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Spooky Length: 7.25"/184mm Size: 280 Weight: 9-7/8oz/280g Specifications: Series: Kensaki Jig Size: 7-1/4" Box Dimensions: 1"H x 3"W x 11"L WT: 0.6 lbs UPC: 022677354330

Read more less

Kensaki 220 Jig - 6.75" - 7-3/4oz - Hot SauceThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Hot Sauce Length: 6.75"/171mm Size: 220 Weight: 7-3/4oz/220g Specifications: Series: Kensaki Jig Size: 6-3/4" Box Dimensions: 1"H x 2"W x 10"L WT: 0.6 lbs UPC: 022677354170

Read more less

Kensaki 280 Jig - 7.25" - 9-7/8oz - Candy FlossThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Candy Floss Length: 7.25"/184mm Size: 280 Weight: 9-7/8oz/280g Specifications: Series: Kensaki Jig Size: 7-1/4" Box Dimensions: 1"H x 2"W x 10"L WT: 0.6 lbs UPC: 022677354255

Read more less

Kensaki 280 Jig - 7.25" - 9-7/8oz - Silver BlinkThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Silver Blink Length: 7.25"/184mm Size: 280 Weight: 9-7/8oz/280g Specifications: Series: Kensaki Jig Size: 7-1/4" Box Dimensions: 1"H x 3"W x 11"L WT: 0.6 lbs UPC: 022677354316

Read more less

Kensaki 280 Jig - 7.25" - 9-7/8oz - Chartreuse BlinkThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Chartreuse Blink Length: 7.25"/184mm Size: 280 Weight: 9-7/8oz/280g Specifications: Series: Kensaki Jig Size: 7-1/4" Box Dimensions: 1"H x 2"W x 10"L WT: 0.6 lbs UPC: 022677354248

Read more less

Kensaki 220 Jig - 6.75" - 7-3/4oz - Blue LagoonThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Blue Lagoon Length: 6.75"/171mm Size: 220 Weight: 7-3/4oz/220g Specifications: Series: Kensaki Jig Size: 6-3/4' Box Dimensions: 1"H x 2"W x 10"L WT: 0.6 lbs UPC: 022677355030

Read more less

Kensaki 280 Jig - 7.25" - 9-7/8oz - Blue LagoonThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Blue Lagoon Length: 7.25"/184mm Size: 280 Weight: 9-7/8oz/280g Specifications: Series: Kensaki Jig Size: 7-1/4" Box Dimensions: 1"H x 2"W x 10"L WT: 0.6 lbs UPC: 022677350875

Read more less

Kensaki 280 Jig - 7.25" - 9-7/8oz - Mack DaddyThe asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.Specifications: Color: Mack Daddy Length: 7.25"/184mm Size: 280 Weight: 9-7/8oz/280g Specifications: Series: Kensaki Jig Size: 7-1/4" Box Dimensions: 1"H x 2"W x 10"L WT: 0.6 lbs UPC: 022677354286

Read more less

22mm Triple Micro Block with Becket - FishingLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in. Length: 64mm / 2.5in. Weight: 64g / 2.25oz. Maximum line: 6mm / 1/4in. Maximum working load: 227kg / 500lb Breaking load: 544kg/ 1200 lb

Read more less

Spooling Station Track MountDo you want to efficiently re-spool your fishing line without any hassle? Look no further than the Spooling Station Track Mount! This one-person solution offers an easy, compact way to re-spool your reel with ease. The Spooling Station is adjustable in width and height, so it fits a wide range of spools. Plus, its pivoting base allows it to respond to the movement at the tip of your rod. We’ve also included an integrated brake that provides extra force to avoid major knots in the line.The RAILBLAZA Spooling Station Track Mount can easily be installed on tracks found on aluminum fishing boats including Tracker VersaTrack, Crestliner, LUND Sport Trak, LOWE Boats, Princecraft, PrinceTrak, Xpress, and Alumicraft– all without any tools required! Our product is guaranteed to make your job simpler, so you can say goodbye to tiring half days spent in between boats and twisting lines! Order yours today and see how convenient re-spooling can be.Re-spooling your fishing line just got so much easier with the RAILBLAZA Spooling Station Track Mount! This one-person solution offers an easy, compact way to re-spool your reel while being adjustable in width and height to fit a wide range of spools. Plus, its integrated brake provides extra force to avoid major knots. Get ready for more time spent fishing and less time trying to spool your line - get yours today!Spooling Station Track Mount Overview:Get Back To Fishing With Ease - Installing the RAILBLAZA Spooling Station Track Mount is simple! This one-person solution offers an easy, compact way to re-spool your reel with ease. The Spooling Station is adjustable in width and height, so it fits a wide range of spools. Plus, its pivoting base allows it to respond to the movement at the tip of your rod. We’ve also included an integrated brake that provides extra force to avoid major knots in the line.Easily Installed on Tracks - Our product can easily be installed on tracks found on aluminum fishing boats including Tracker VersaTrack, Crestliner, LUND Sport Trak, LOWE Boats, Princecraft, PrinceTrak, and X – all without any tools required! So whether you’re fishing on a lake or stream, our RAILBLAZA Spooling Station Track Mount will have you prepared for whatever fish you reel in.Simplify Your Fishing Job - Fishing can be frustrating enough without having to worry about re-spooling your line. With our RAILBLAZA Spooling Station Track Mount, you can quickly and easily re-spool your reel without any drama. This one-person solution makes things simpler so you can get back to fishing quickly.Features: Easily installs on tracks found on aluminum fishing boats No tools are required! Adjustable in width and height to fit a wide range of spools A pivoting base allows it to respond to the movement at the tip of your rod Integrated brake provides extra force to avoid major knots in the line Specifications: Weight: 0.54 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included:1 x Spooling StationTrack Mount Hardware Specifications: Type: Track Mount Box Dimensions: 3"H x 3"W x 6"L WT: 0.55 lbs UPC: 814162021762

Read more less

Elite Screwless Stainless Steel 0° Rod & Cup Holder - Drain - Oval Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Oval Top 0º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.75 lbs UPC: 857515002247 Quick Guide (pdf)

Read more less

Tritanum Plus™ - 30lb - Dark Green - 450 ydsSufix Tritanium Plus™ is an advanced copolymer that is tough as nails, incredibly strong, and easy to handle. Advanced anti-abrasion copolymer formula for maximum durability. High tensile and knot strength as well as special anti-friction agents reduce abrasion and improve casting. A long casting line perfectly suited for surfcasting.Specifications: Color: Dark Green Test (lb): 30 Capacity: 450yds Spools (1/4lb) Features: Advanced anti-abrasion copolymer formula for maximum durability High tensile and knot strength Special anti-friction agents reduce abrasion and improve casting An ideal line for flipping and pitching into dense cover Specifications: Break Strength: 30 lb. Color: Green Length: 450 yds Series: Tritanum Plus Box Dimensions: 3"H x 4"W x 4"L WT: 0.4 lbs UPC: 024777994355

Read more less

Large Stainless Steel Bolt-less Swivel Rod Holder - 15°2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever!Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. These larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Aluminum Clamp-On Rod Holder - Vertical - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009762

Read more less

Heavy-Duty Adjustable Rod Holder with Combo Mount - White This rod holder is designed for use with baitcasting and spinning reels.Features: An ergonomic design and easy-to-find rapid-release latch Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings Specifications:Color: White*Sold as an Individual Quick Guide (pdf)

Read more less

Stand-Off Mount Rod HolderFeatures: White UV-Stabilized Polyethylene Front Access Hole & Integrated Stand-Offs for Easy Mounting Stainless Hardware Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Triple Threat™ Rod Holder - Track MountThe Triple Threat™ Rod Holder is the one-stop shop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT Triple Threat™ Rod Holder.Features: The quarter-turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 3"H x 10"W x 13"L WT: 0.98 lbs UPC: 035514326315 Brochure (pdf)

Read more less

Triple Threat™ Rod Holder - Surface MountThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!Features: The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon Specifications:Fastener: 1/4 “ FHWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Mounting Style: Surface Box Dimensions: 3"H x 10"W x 13"L WT: 1 lbs UPC: 035514326964 Brochure (pdf)

Read more less

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 9" Mounting Style: Side Box Dimensions: 3"H x 6"W x 18"L WT: 1.5 lbs UPC: 035514325783

Read more less

1157 Stainless Steel Thimble KitIncludes: 2 stainless steel thimbles 4 heavy-duty brass connector sleeves 4 brass connector sleeves

Read more less

LED Tube Insert for Existing Rod Holders 11' Long Cut To Fit Any AngleRetrofit your existing rod holder with the LED RGB Tube Insert. Just remove your existing liner, install the LED RGB Tube Insert, and cut to your mounting face angle. A Bluetooth Smart Phone Controller (403051-1, sold separately) lets you operate this RGB LED Rod Holder Tube Insert from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB rod holders with an optional terminal block (426624, sold separately). Patented.Features: 10" x 1-5/8" x 12" Weight: 0.25 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LED Rod Holder Cap Light - 2" DiameterLED RGB Rod Holder Cap attaches to the bottom of any 2” diameter rod holder. A Bluetooth Smart Phone Controller (403051-1) lets you operate this RGB LED Rod Holder Cap from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB Rod Holder Caps with an optional terminal block (426624). Specifications: Lumens: 200 Watts: 2.4W Voltage: 12V Light Color: RGB LEDs: 12 Patented  * Sold in PairsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LED RGB Rod Holder with Tube InsertThese LED RGB Rod Holders to have translucent tube inserts with bright RGB LEDs and a 30° angle. Or retrofit your existing rod holder with the LED RGB Tube Insert (325189, sold separately). Just remove your existing liner, install the LED RGB Tube Insert, and cut to your mounting face angle. A Bluetooth Smart Phone Controller (403051-1, sold separately) lets you operate this RGB LED Rod Holder from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB rod holders with an optional terminal block (426624, sold separately). Specifications: Constructed of formed 304 stainless steel Patented Watts: 2.6W Voltage: 12V WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010614

Read more less

The Original "Snapper" Line Release104718" leader with cannonball snapThe fishing line is gripped between the soft pads with variable release tension attained by moving the line in or out of the jawsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Cap for Round Plastic Rod HoldersFeatures For use with P1000B, P1000DW, P1015DB and P1015DW For plastic rod/cup holders with round top

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5001GLColor:   GoldFits:      1.050" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.75 lbs UPC: 096811500129

Read more less

3-Rod Poly Rod Rack Deluxe Durable polyethylene to withstand the harsh marine environment Flared rod holder for easy rod handling Slotted rod holders lock in most conventional & spinning outfits Deluxe racks feature convenient integrated slots for knife & pliers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Diameter (Inches): 1-3/4" Length (Inches): 18" Box Dimensions: 3"H x 12"W x 18"L WT: 1.6 lbs UPC: 045038543334

Read more less

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 1-1/2" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010904

Read more less

70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - BoxedThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296010331 Quick Guide (pdf)

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.05" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 11"W x 14"L WT: 1.6 lbs UPC: 768296009694

Read more less

22mm Triple Micro Block with Cam Cleat - FishingLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in. Length: 51mm / 2in. Weight: 99g / 3.5oz. Maximum line: 6mm / 1/4in. Maximum working load: 227kg / 500lb Breaking load: 544kg/ 1200 lb

Read more less

Power Grip Plus Planer Board ReleaseA line release is the critical link between the downrigger and the fishing rod. If it does not preform properly you will loose both valuable fishing time and fish. The fishing line is gripped between the soft pads with variable release tension attained by moving the line in or out of the jaws. The line release is attached to either the weight or the cable. Patented "tension adjuster" doubles the holding power.

Read more less

2-In-1 Non-Adjustable Rod Holders *2-PackThese two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear. Features: Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter  The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter Specifications: Mount: Side Color: Black *Includes two-rod holders Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296011109 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296010836 Quick Guide (pdf)

Read more less

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Swivel Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-9/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Swivel Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in. Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 15"L WT: 5.5 lbs UPC: 768296011048 Quick Guide (pdf)

Read more less

70 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner - BoxedThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 11"L WT: 4 lbs UPC: 768296010317 Quick Guide (pdf)

Read more less

832® Advanced Superline® Braid - 20lb - Low-Vis Green - 300 ydsSufix® 832® Advanced Superline® is the strongest, most durable small diameter braid on the market. R8 Precision Braiding and fiber technology provide superior strength, roundness, and line consistency. 832 Advanced Superline has 8 fibers (7 HMPE fibers plus 1 GORE® Performance Fiber) and 32 weaves (pics) per inch. GORE® Performance Fibers improve abrasion resistance, increase casting distance & accuracy and reduce line vibration. HMPE fibers provide high strength & sensitivity, hydrophobic water-repellent protection, and small diameter.Features: 8 Fibers (Featuring one GORE® Performance Fiber and 7 HMPE Fibers) 32 pics (weaves) per inch R8 Precision Braiding Technology Ultimate Abrasion Resistance Unbeatable Strength Proven Castability Improvements TPG™ Technology Enhances Color Retention WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 20 lb. Color: Green Length: 300 yds Series: 832 Box Dimensions: 1"H x 4"W x 5"L WT: 0.15 lbs UPC: 024777662612

Read more less

Plastic 15° Rod & Cup Holder - Drain - Round Top - WhiteFeatures ABS Plastic with Round Top 15º Rod Angle Drain at Bottom Specifications: Angle: 15 Degrees Construction: Plastic Finish: White Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 10"L WT: 0.48 lbs UPC: 857515002278 Quick Guide (pdf)

Read more less

Bait & Casting Reel WrapA wraparound that is a fast, easy protective cover for your reels. Designed for all fresh-water bait-casting reels. Protects from dust, moisture and sun.

Read more less

Triple Threat™ Rod Holder Track Mount - Base OnlyThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This is a TRACK MOUNT BASE ONLY for the Triple Threat™ Rod Holder.Features: Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 2"H x 3"W x 5"L WT: 0.18 lbs UPC: 035514326360 Brochure (pdf)

Read more less

Stainless Steel 90° Flush Mount Rod Holder A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 8-1/4" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.15 lbs UPC: 035514325929

Read more less

Base Reducer - PairIf you currently have a set of TACO Marine outrigger poles from your GS-170 mounts, they can still be used if you upgrade your bases to our GS-280 or 380 series. Our TACO Outrigger Base Reducer is the perfect complement to allow your current poles to be used, by reducing the base without missing a beat.Features: Reduces Grand Slam base from 1-1/2" to 1-1/8" Allows the use of GS-170 Outrigger Poles with GS-200 and 300 Series Nylon, easy-to-install sleeve design 1-year Limited Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Rod Holder - Heavy Duty - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Surface Box Dimensions: 3"H x 6"W x 14"L WT: 2.6 lbs UPC: 096811530058

Read more less

Fish Stik - YellowFinally, a fish measurement board specialized for anglers in tight spaces. With limited space in the cockpit of a kayak, on the deck of a paddleboard, or in a gear bag when wade or bank fishing, the Fish Stik gives users back the fishing space by folding down and storing easily.The new design addresses the biggest problems with old-school measuring boards, poles, and tapes: it folds down to save space, and it floats. Stop compromising space and measurements. Get back to fishing; get back to measuring. At 36 inches long and folding to only 12 inches when stowed, The Fish Stik covers the full spectrum of necessity—from measuring trophy fish to stowing down under a raised seat, between tackle boxes, or in a storage crate.The Fish Stik also has a raised 3.5-inch bump board and line slot to improve measurement accuracy, increase angler efficiency, and minimize the stress on the fish. When measuring a fish off-the-line, hold the mouth/nose of the fish tightly against the bump board for the most accurate measurement.When measuring a fish on-the-line, the built-in line slot allows users to pull the line through the slot in the bump board and proceed with the measurement, uninterrupted by line adjustment.Features: 12 inches when stowed and 36 inches when expanded Easily store the Fish Grips Jr. inside the folded Fish Stik It comes with a marker for self-applied darkened measurement indicators for CPR photos and tournament submissions 1-year warranty Specifications:Color: YellowWarning: Do not add substantial weight to The Fish Stik, as the addition of weight may reduce its ability to float

Read more less

No. 350 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinIncludes No. 241 combination deck or side mount.Bolting dimensions: 1 5/16" x 3 3/16"

Read more less

Fishing Series HandlesThe Fishing Series handles are a unique new design that focus on the same quality as Shurhold?s original handles but also places emphasis on the handles aesthetic. The handles are sleek black with hand wrapped gold trim, and extra long foam fishing style grips for added comfort. This handle will match the look and feel of most fishing rods. The Fishing Series handle also features Shurhold?s exclusive SHUR-LOK quick release system which positively locks quickly and easily with any Shurhold accessory. 760FS - 5' (152 cm) Fixed Length HandleLightweight and convenient. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 61"L WT: 1.05 lbs UPC: 703485120484

Read more less