Base Valve Gasket for 29090 & 29120 Series ToiletsJabsco Base Valve GasketCompatible Models: 29090 Series Toilets 29120 Series Toilets

Read more less

Neoprene Impeller Kit with Cover, Gasket or O-Ring - 6-Blade - 5/16 Shaft DiameterJabsco's Neoprene Impeller Kit is used specifically in Jabsco's Water Puppy, Part #6617.Included: Cover Gasket O-Ring WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Impeller KitMaterial:NeopreneDrive Type:Slotted Shaft - Pin DriveNumber of Blades:6Dimensions: Diameter:1-9/16" Shaft Width:15/32" Shaft Diameter:3/4" Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Fine Mesh PumpgardIn-Line StrainerCompact pre filter prevents particles jamming valves and causing pump breakdowns - we've given them a screw off, transparent housing for easy inspection and quick, in place cleaning. Our new Universal model makes it easier than ever to install your pump by fitting directly into diaphragm pump inlet port as well as benefiting from swivelled angled inlet port on a rotating body so inlet hose can approach from any direction!WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Pumpguard In-Line Strainer - 1/2" NPTHandy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning.Accommodations: For 1/2" Line For Use With: In-Line Material: Plastic & Stainless Screen Type: StrainerWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Pumpguard In-Line Strainer - 1/2" NPT PortHandy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning.Prevents dirt from entering pump intake. Works in any position. Easy to install and clean. Has transparent housing and stainless steel mesh filtering screen. Jabsco Pumpguard in-line strainers make great filtering agent.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Impeller KitMaterial:NitrileDrive Type:Single Flat DriveNumber of Blades:6Dimensions: Diameter:2" Shaft Width:5/16" Shaft Diameter:7/8" Insert Material:PlasticJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is =possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

In-Line Non-return ValveNon-return valves help priming and prevent backflow of water into the bilge. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Inlet Size: 3/4" Outlet Size: 3/4" Type: Misc Box Dimensions: 2"H x 4"W x 6"L WT: 0.2 lbs UPC: 671880551397 Quick Guide (pdf)

Read more less

Replacement Belt Kit for Lite FlushSpecifications: 9mm Drive Belt Packaged Dimensions: L:5.00 x H:5.00 x W:5.00cm Actual Weight: 0.10 Kg  (Approx. 0.30 Kg packed)

Read more less

Service Kit f/Quiet Flush 37045/37245 SeriesWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 5"L WT: 0.05 lbs UPC: 671880520959

Read more less

4-Blade Chopper Kit with Lock Nut for 18590 Series Macerator PumpsThe Jabsco 4-Blade Chopper Kit replaces a worn, broken, or malfunctioning macerator chopper in the 18590 Series. The chopper is designed with 4 heads, each with its own blade to break up large debris before it enters the pump and other fluid lines. Includes a lock nut to secure it in place.

Read more less

In-Line Non-Return Check Valve - 1"In-line non-return valve. Connections for 25mm (1”) bore hose.Features: Connections: - for 25mm (1”) bore hose Dimensions: - 108mm long, 55mm wide, 50mm high (in-line configuration) Aids pump priming, prevents backflow from pump into bilge Fits into pump suction line Robust plastic construction with nitrile rubber valve Adjustable port configuration for convenient hose angle Actual Weight: 0.11 Kg  (Approx. 0.31 Kg packed) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Bolt Kit for Older 18590 Series Macerator PumpsReplaces bronze studs and acorn nutsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 1"H x 1"W x 4"L WT: 0.1 lbs UPC: 671880624688

Read more less

Joker Valve KitFits Models 29090/29120/29200/58040/58060/58080/58260/58240/58280/58500

Read more less

Seal Kit for Quiet Flush ToiletsA replacement seal and retainer for Jabsco pumps and heads.

Read more less

Joker/Check Valve KitFor use with 37010, 37045, 37075, 37085, 37245, 37275 Series Marine Toilets, and 37055, and 37255 Series Electric Conversion Kits.Fits inside the discharge elbow and the connection of the pump cylinder.

Read more less

Port Kit 90-Degree Elbow 1/2" Hose Fitting - PairSpecifications: Pair of ports EDPM O-Ring Actual Weight: 0.01 Kg  (Approx. 0.21 Kg packed)

Read more less

Slinger Kit *3-PackJabsco toilet slinger.

Read more less