Lewmars EVOTM Winch Range evolution from the renowned Ocean winch. Features Easy Servicing - No tools required User friendly direction arrows All the benefits of the EVOTM range Choice of three finishes. Convertible to electric <font size="1 in>5/16 - 9/16

Read more less

The Pro-Series windlass from Lewmar is simply the professionals' choice. Lewmar windlasses are chosen by more boat builders than any other manufacturer. The Pro-Series extends Lewmar's commitment to provide quality products for boats from 6m-14 (20-45ft). The Pro-Series is deisgned for easy installation and the housing is made from 100% 316 Stainless Steel, making the product well protected and durable. For additional ease of use, the Pro-Series has a Manual Recovery system built in. Windlass supplied in kits including the following: 700 model: Windlass, Base gasket seal, Fast mounting studs, Installation wrench, toggle switch and circuit breaker 1000 model: Windlass, Base gasket seal, Fast mounting studs, Installation wrench, rocker switch, contactor and circuit breaker Powerful motor providing fast line speed Manual recovery operation-all you need is a common 1/2 in(12mm) socket wrench Strong 100% 316 Stainless steel, including control arm and stripper Maximum pulling power: 700lbs (320Kg) for the 700 and 1000lbs (454Kg) for the 1000 Convenient above deck installation 5-year warranty 700 Series uses the 503 Gypsy for 1/4 in G4 Chain and 1/2 in line 1000 Series uses the 516 Gypsy for 5/16 in G G4 Chain and 9/16 in line.

Read more less

Lewmar ProFish 700Model: 6656211967-310 Automatic freefall Powerful motor providing fast line speed Manual emergency recovery equipped all you need is a common 1/2 socket wrench Strong 100% 316 stainless steel, including control arm and stripper Convenient above-deck installation 5-year warranty For boats up to 12m (38ft) Lewmar's Pro-Fish model is the ultimate windlass for fishermen. The Pro-Fish has an automatic freefall that allows you to pull right up over a wreck or ledge, and drop anchor with speed and precision. No more running your motor or wasting fuel while you hover fish. You can retrieve your anchor just as easily, with the push of a button. Plus, the Pro-Fish is DIY ready and made of durable 100% 316 stainless steel.The gypsy has been specially designed to suit leaded lines up to 16mm in diameter and a revised control arm and new Pro-Guard plate prevent the rope from jumping out of the windlass or snagging during operation.SpecificationsVoltage12vDC Motor Power 500 watt Normal Current draw 35 Amps Circuit breaker 50 Amps Works With Chains 6mm DIN 766 / 7mm DIN 766 / 1/4 ISO G4 / 1/4 in BBB Works with Rope 12mm 1/2 in 3-strand and 8-plait Maximum Pull 700lbs Maximum Line Speed 105 Feet per minute Working Load Limit 175lbs Weight 19lbs What's in the Box: Profish 700 Windlass 50A Circuit Breaker Rocker Switch Contactor Documentation"

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 23.8 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 27 5/16 27 5/16 1 11/16 3 3/16 19 3/16 24 1/2 24 1/2 1 11/16

Read more less

Lewmars EVOTM Winch Range evolution from the renowned Ocean winch. Features Easy Servicing - No tools required User friendly direction arrows All the benefits of the EVOTM range Choice of three finishes. Convertible to electric <font size="1 in>5/16 - 9/16

Read more less

Lewmar Pro Series 700 Horizontal Windlass 6-7 mm- 1/4 in Kit Model: 6656011967-310 Powerful motor providing fast line speed Manual emergency recovery equipped all you need is a common 1/2 socket wrench Strong 100% 316 stainless steel, including control arm and stripper Maximum pulling power: 320kg (700 lb) for the 700 Convenient above-deck installation 5-year warranty Free Fall conversion kits available as an option Praised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmars commitment to provide quality products for boats from 6m-11.5m (20-38ft). Its DIY-ready, easy to install and housed in 100% 316 stainless steel, making it well protected and durable. And with push-button control and a built-in manual emergency recovery system, anchoring has never been easier. SpecificationsSupported Chains6mm DIN 766 / 7mm DIN 766 / 1/4 in ISO G4 / 1/4 in BBB Support rope 1/2 in 3-strand and 8-plait Input Voltage 12V Dimensions 5 3/4 in H x 9 5/8 in D x 7 in W What's in the Box: Windlass Base gasket Fast mounting studs Installation wrench Circuit Breaker Dual-direction solenoid Rocker switch

Read more less

Lewmar V700 Verticle Anchor Windlass12v, 6/7mm gypsyModel: 6670011108-312UPC: 743683302930 The V700 now comes with a gypsy able to accept both 6mm and 7mm (1/4) inch chains. Fits calibrated chains: 6mm DIN766, 1/4 G4 or BBB

Read more less

Easy Installation Simple operation Unique Hinge system Brown leather fitted as standard Dual Hub version enables fitting to standard Lewmar tapered steering shaft or 1 in parallel steering shaft

Read more less

Lewmar 35lb DTX Stainless Steel AnchorModel: 0057216 Manufactured from 316 stainless steel Self launching Ordinary Holding Power certified Guaranteed for 3 years against breakage Every DTX anchor is certified to Lloyd's Ordinary Holding Power standard. The new DTX anchor fills the gap between the existing galvanised and stainless Delta(R) anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of our Delta(R) anchors have come to expect.

Read more less

Easy Installation Simple operation Unique Hinge system Brown leather fitted as standard Dual Hub version enables fitting to standard Lewmar tapered steering shaft or 1 in parallel steering shaft

Read more less

Stern thruster tunnel kit for 185TT thruster. Thruster sold separately.

Read more less

Easy Installation Simple operation Unique Hinge system Brown leather fitted as standard Dual Hub version enables fitting to standard Lewmar tapered steering shaft or 1 in parallel steering shaft

Read more less

Lewmar VX1 verticle Windlass with 6/7mm Gypsy 300 Watt Motor Model: 69100030 VX1- Robust worm wheel gearbox IP67 cover as standard Stylish stainless steel and composite construction Same footprint as V1 model During 2015, Lewmar undertook an aggressive development program to renew its market-leading vertical windlass range. Their engineering team is continually exploring, evaluating and testing new materials to ensure we offer cutting edge products that are lighter, stronger and optimised for best performance. The VX1 is the first in the expansive new range of windlass. Using a new product development team solely working on new ways to design, develop and manufacture, Lewmar has been able to offer new age technologies to refine our windlass design. This makes our VX range lighter, stronger & more efficient than any competitor on the market. SpecificationsMax Pull400 Kg Working Load 100 Kg Max Line speed 25 meters minute What's in the Box: Windlass 50Amp breaker Contactor Guarded rocker switch

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

The Lewmar 'Wavespring' self-tailer combines their renowned and gentle wave grip feature with self adjusting springs. It handles today's smaller diameters, as well as the traditional larger Dacron composite ropes. A sleek, minimum-friction feeder arm provides absolute snag-free operation. Specifications Gear Ratio Power Ratio Weight(lb) 2:1 15.8:1 8.6 Dimensions Drum Diameter D(in) Base Diameter B(in) Height H(in) Line Entry L(in) Line Size(in) 2 9/16 4 3/4 5 3/4 2 5/16 5/16-1/2

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 17.6 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 22 5/8 22 5/8 1 11/16 3 3/16 14 7/16 19 15/16 19 15/16 1 11/16

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Flat base hatches cannot be used with Trim kits or Roller shades Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Flat Base Smoke Grey 17.6 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 22 5/8 22 5/8 1 11/16 3 3/16 14 7/16 19 3/4 19 3/4 1 9/16

Read more less

Stern thruster tunnel kit for 140TT thrusters. Must purchase 140TT thruster separately.

Read more less

Lewmars EVOTM Winch Range evolution from the renowned Ocean winch. Features Easy Servicing - No tools required User friendly direction arrows All the benefits of the EVOTM range Convertable to electric Notes:Mounting Instructions 5 x M6 (1/4 in) c'sk head screws on 94mm (3 11/16 in) PCD

Read more less

Lewmar Pro-Sport 550G Horizontal Windlass mm-7mm-1/4 in Gypsy Model: 6656811967-303 UPC: 743683306471 Powerful motor providing superior line speed Low power consumption / current draw Dual direction powered operation Maximum pulling power: 250kg (550 lb) Convenient above-deck installation For boats up to 9m (28ft) Lewmars Pro-Sport rope/chain windlass is designed as an economical package for rope and chain applications, without compromise to quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful permanent magnet motors. The unit has manual freefall and two gypsy sizes to choose from. It is DIY-ready and easy to install. Its rugged aluminum center case and durable composite side covers make Pro-Sport the perfect choice. Complete with push-button control, anchoring has never been easier. SpecificationsChain Size1/4 in G4, 1/4 in BBB, 7mm DIN 766 Rope 12mm 3-strand and 8-plait Input Voltage 12v Dimensions 8 7/16 in L x 7 1/8 in W x 5 5/8 H What's in the Box: Windlass Base gasket fast mounting studs Installation Wrench Toggle switch Circuit Breaker

Read more less

The Lewmar 'Wavespring' self-tailer combines their renowned and gentle wave grip feature with self adjusting springs. It handles today's smaller diameters, as well as the traditional larger Dacron composite ropes. A sleek, minimum-friction feeder arm provides absolute snag-free operation. Specifications Gear Ratio Power Ratio Weight(lb) 2:1 15.8:1 6.4 Dimensions Drum Diameter D(in) Base Diameter B(in) Height H(in) Line Entry L(in) Line Size(in) 2 9/16 4 3/4 5 3/4 2 5/16 5/16-1/2

Read more less

Panel mount AutoAnchors. Suitable for DC electric windlasses using all-chain or rope/chain rode and hydraulic or AC powered windlasses using all-chain rode. It works with the Lewmar prefitted reed switch sensors It has additional diagnostics to help troubleshooting the windless Large LCD display shows at a glance how much anchor is out "One touch" automatic function deploys and retrieves a preset length of anchor rode Docking alarm and pre-set stopping point help protect the boat during anchor retrieval Adjustable red backlighting ensures clear night operation Choice of feet or metres rode measurement Safety lock reduces unwanted windlass operation Easy installation and set up Install up to 2 units on the boat Weather cover to protect the console unit Console colour grey

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 11 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 20 1/16 20 1/16 1 11/16 3 3/16 11 7/8 17 3/8 17 3/8 1 11/16

Read more less

Lewmars EVOTM Winch Range evolution from the renowned Ocean winch. Features Easy Servicing - No tools required User friendly direction arrows All the benefits of the EVOTM range Convertable to electric Notes:Mounting Instructions 5 x M6 (1/4 in) c'sk head screws on 94mm (3 11/16 in) PCD <font size="1 in>5/16 - 9/16

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 10.5 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 19 1/8 19 1/8 1 9/16 2 15/16 3/16 11 3/4 16 9/16 9/16 1 11/16

Read more less

Lewmar 22lb Epsilon Stainless Steel AnchorModel: 0057510 Super-High Holding Power Galvanised and stainless steel versions Anti-snagging design Optional roll bar for sailboat application Ballasted tip for fast setting Fully compatible with Lewmar bow rollers The Epsilon super-high holding power anchor builds upon the legendary Delta(R) anchor's robustness and quality. Its concave fluke and ballast keel ensure market-leading holding power and rapid setting, while maintaining self-launching characteristics with Lewmar bow rollers and retaining the same shank geometry as the original Delta(R).Time-proven materials are used throughout the range: manganese steel or 316 stainless steel for maximum strength.

Read more less

The sleekly designed Low Profile Hatch is ideal for use on a powerboat. Smaller ventilation hatches are a better fit for sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid size yachts. Lewmar hatches feature Lewmar's unique sealing system allowing easy acrylic replacement. All sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom). <table cellpadding="0 in style="border-collapse: collapse" border="1 in> Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 12.8 3/8 Dimensions <table cellpadding="0 in style="border-collapse: collapse" border="1 in> Diameter Ø (in) Height Z (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Diameter Ø1 (in) 23 1/8 1 23 1/4 6 13/16 20 3/8

Read more less

Lewmar 10kg/22lb DTX Stainless Steel AnchorModel: 0057210 Manufactured from 316 stainless steel Self launching Ordinary Holding Power certified Guaranteed for 3 years against breakage Every DTX anchor is certified to Lloyd's Ordinary Holding Power standard. The new DTX anchor fills the gap between the existing galvanised and stainless Delta(R) anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of our Delta(R) anchors have come to expect.

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 9.09 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 15 3/8 20 1/2 1 9/16 2 15/16 3/16 13 3/16 12 7/8 18 1 11/16

Read more less

Lewmar Size 30 Ocean Hatch with Flat BaseModel: 39630050 Friction levers hold the lid open in any position up to 95 deg Anodised aluminium frame for corrosion resistance Suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom). With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face.SpecificationsOverall Dimensions L x W x H15 3/8 x 20 1/2 in x 1 9/16 in Cut-Out Dimensions L x W x H 12 11/16 in x 17 13/16 in x 1 9/16 in Hidge Width 13 3/16 in Acrylic Window Thickness 3/8 in "

Read more less