LightArmor Deck Mount Navigation Light - Stainless Steel - Port (red) - 2NMINTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.*LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Housing: Stainless Lens Color: Red Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12v LED: Yes Box Dimensions: 3"H x 5"W x 6"L WT: 0.2 lbs UPC: 022697013163

Read more less

Apelo A2 Blue White Underwater Light - 3000 Lumens - Bronze Housing - White Lens with Edge LightTurn up the party, select the mood, switch on the fish magnets. Apelo underwater lighting brilliance by Hella Marine lets you do it all. Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.Features: Intense white and vibrant blue illumination, or select Apelo RGB for complete control of the color spectrum Optical Intelligence: Wide horizontal illumination with a narrow vertical angle for a spectacular effect Corrosion-resistant thermal polymer housing and Grilamid high strength nylon lens Completely sealed and electronically protected Robust surface mount design Advanced thermal management ensuring ongoing protection and no damage by operation out of the water Charcoal or white lens Suitable for hulls of any material Specifications: Color: White/Blue Material: Bronze Mounting Style: Surface Voltage - Input Range (Volts): 12/24 Box Dimensions: 4"H x 6"W x 7"L WT: 1.5 lbs UPC: 4082300826555 Brochure (pdf)

Read more less

8" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 1.2 Lumens: 94 Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs UPC: 786142416502

Read more less

4" LED Light Strip - White with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companion ways, or for step illumination.Features: 12VDC, 1.2W 6 EA 2835 LEDs Daylight white (4500K) IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 786142416403

Read more less

2" LED Light Pod - Scene Optics - Black Housing - Pro Series 3.0This 2-inch LED POD uses 10-watt Cree XM-L2 LEDs, making it one of the highest performers in its class. The Scene LED POD light for trucks delivers extreme IP69K durability to match its high performing LEDs, giving users confidence that their lights are going to perform when needed.The Scene Light Pod throws light at a 120-degree beam angle, giving users extremely widespread dispersion without a hot spot. This 2-inch LED POD mounts virtually anywhere, and with all the hardware needed in the box, this LED work light is ready to go.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Scene optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Deck or spreader lights Trailer lighting Rear bumper lights Work lights Mower lights Area light for agricultural equipment Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.80" x 3.20" In the Box: 2" scene LED light pod Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Amps - Draw: 2.8 Bulb Type: LED Bulb Watts: 40 Waterproof: Yes Wireless: No Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 850044517176

Read more less

LED Low Profile Task Light with Touch On/Off/Dimmer Switch - 304 Stainless SteelLED Low Profile Task Light with touch dimmer features 24 warm white LEDs @ 0.19A (145 lumens). Integral touch controlled on/dim/off operation, activated by pressing the center button. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant, polished 304 stainless steel. Installs with two #6 FH fasteners (included). 12-28 VDC. IP65 rating. CE compliant.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Dimming: Yes Housing: Stainless LED Color: White Voltage - Input Range (Volts): 12/24v Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 035514404648

Read more less

Razor Light Bar - Flood - Black Housing - Flush MountFeatures: 10,000+ TRUE lumens output Surface mountable on top or inverted Dimmable with no additional dimmer switch required Available with two beam patterns (spot or flood) Low profile (1.5”) with a sleek streamlined design Powder-coated die-cast aluminum construction Voltage: 10-30VDC Specifications: Beam Pattern: Flood Housing: Black Length (Inches): 18" Voltage - Input Range (Volts): 12/24v Box Dimensions: 5"H x 5"W x 25"L WT: 2.4 lbs UPC: 089300015884

Read more less

Caprera3 Spreader Light - Spectrum - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Series 201-011 - Masthead Light - 3NM - Vertical Mount - White - Silver HousingLopolight started out back in 2004, offering many solutions and neat combinations for all size boats and yachts. The tradition continues. Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant,  compact and precise solution with good value for money.  Features:Single Light - MastheadTechnical Specifications: Visibility - 3NM Vessel size - 39.37' to 65.62' (12 to 20M) Operating Voltage - 10 - 32 VDC Number of LED Bulbs - 1 Light Color - White Mounting - Vertical Materials - Anodized aluminum Connection - 2.3' (.7M) cable  IP rating - IP68 Weight - 15.17oz Certifications: U.S.C.G. EN14744 COLREG72 In the Box: Navigation light w/2.3' (.7M) cable  Mounting hardware Installation guide *Sold as an Individual Specifications: Housing: Silver Lens Color: White Visible Range (Miles): 3NM Voltage - Input Range (Volts): 10 - 32 LED: Yes Box Dimensions: 3"H x 6"W x 8"L WT: 0.95 lbs UPC: 879343009700 Quick Guide (pdf)Brochure (pdf)

Read more less

Mirage - Flush Mount Down Light - Glass Finish/Polished Stainless Steel Bezel - 2-Color White/Blue DimmingLumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens).Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes Housing: Stainless LED Color: White/Blue Box Dimensions: 2"H x 3"W x 3"L WT: 0.2 lbs UPC: 089300103734 Brochure (pdf)

Read more less

Illusion Flush Mount LED Down Light - Spectrum RGBW - Warm WhiteThe Illusion Series is designed to have an ultra-thin profile with a seamless, clean look and incorporating industry-first materials and processes.  Unique in styling and highly versatile in appearance the Illusion Down Light will launch the series. A bezel-free design allows for a wafer-thin profile with a shallower mounting depth than the current Mirage light, but it still incorporates the convenient butterfly clip mounting system with no exposed fasteners. The Illusion Down Light will be compatible with our new Intelligent  “Sound-to-Light” feature when paired with a Poco 4 module. Color output options will be warm white/spectrum, cool white/spectrum, and single color white and warm white output. A proprietary finishing process allows for unique industry-first designs incorporating metallic colors and many other styling options. This unparalleled flexibility adds a new level of customization to the downlight category to meet the contemporary design and color pallets of today’s boats.Ultra Thin ProfileThe Illusion Down Light is designed with a wafer-thin profile for a seamless, clean look. Chemically hardened glass reduces the thickness of the light's face, while a shallow housing further reduces the space required to mount it on hardtops and interior ceilings.Unique Finishing OptionsA proprietary finishing process was developed for the Illusion Down Light that allows unique finishes to be applied to the face of the light. The customizable options are endless, from the illusion of a bezel to contemporary metallic colors and wood grain and metal finishes.Butterfly Mount ClipThe Illusion Down Light will retain the convenient butterfly mount clip system found on the Mirage series of downlights for easy installation with no exposed fasteners. This tried and tested mounting system will speed up the installation process while reducing overall complexity.Poco CompatibilityThe Illusion Down Light is PLI-enabled, meaning the internal "Power Line Instruction" technology built into the light makes it compatible with our award-winning Poco Digital Lighting Control system. This will allow for lighting control when paired to a Poco module for precise color selection, dimming, and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Features: Power line instruction 2-wire hookup Dimming IP Rated RGBW Full-Color 3-Year Warranty Specifications: 12v DC Amps: 430mA 24v DC Amps: 230mA Correlated Corrected Temperature (CCT): 5000 CE Certified: Yes Color Match Commitment (CM): Yes Color Output: Spectrum RGBW - Warm White Color Rendering Index (CRI): 80+ Depth: 0.7 in (1.77cm) Diameter: 2.5in (6.35cm) Finish/Housing: White IP Rating: 67 Lumens: 285 Op. Temp F/C: -31/35 to + 131/55 F PLI Enabled: Yes Related Watts: 6W Sub Category: Dome & Down Lights Third-Party Dimmer Compatibility (3PD): No Timed Toggled Protocol (TTP): Yes UL Certified: No Voltage: 10-30 VDC

Read more less

LightArmor Fast Action Bi-Color Pole Light - 14" & 2-PinPremium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today’s boat designs.Features: ISO 19009:2015 Certified Impact-resistant polycarbonate lens Water-resistant Corrosion and UV-resistant LED light engines last for 50,000 hours 2-pin and locking collar  Specifications:Pole Length (inch): 14"*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications: Housing: Black LED: Yes Lens Color: Red/Green Box Dimensions: 3"H x 6"W x 22"L WT: 0.45 lbs UPC: 022697021625 Quick Guide (pdf)

Read more less

Apelo A2 RGB Underwater Light - 3000 Lumens - Bronze Housing - White Lens with Edge LightTurn up the party, select the mood, switch on the fish magnets. Apelo underwater lighting brilliance by Hella Marine lets you do it all. Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.Features: Intense white and vibrant blue illumination, or select Apelo RGB for complete control of the color spectrum Optical Intelligence: Wide horizontal illumination with a narrow vertical angle for a spectacular effect Corrosion-resistant thermal polymer housing and Grilamid high strength nylon lens Completely sealed and electronically protected Robust surface mount design Advanced thermal management ensuring ongoing protection and no damage by operation out of the water Charcoal or white lens Suitable for hulls of any material Specifications: Material: Bronze Mounting Style: Surface Voltage - Input Range (Volts): 12/24 Box Dimensions: 4"H x 4"W x 6"L WT: 1.7 lbs UPC: 4082300826548 Brochure (pdf)

Read more less

Low Profile Marine Bar - Flood - Undermount - BlackTHE LOWEST PROFILE MARINE LED LIGHT BAR ON THE MARKETThe Black Oak Low Pro Light Bar – the lowest profile light bar on the market, designed with a streamlined look that mounts flush to your boat. Engineered with built-in dimming, adjustable feet to set the light at the perfect angle, and an IP69 rating for ultimate resistance against saltwater and extreme conditions.With 18 ultra-bright LEDs delivering an impressive 12,000 lumens, this light bar defies its slim size with massive light output. Backed by Black Oak's comprehensive lifetime warranty, the Low Pro Light Bar offers the perfect fusion of style, performance, and durability.Adjustable FeetSet your light at the perfect angle to avoid bow glare and direct the beam exactly where you want it, even if you plan on under-mounting, we have a wide variety of angled feet available to suit your vessel perfectly.Dimmable LEDs Easily control Lowpro's 12,000+ true Lumens with the flip of a switch—there's no need for third-party remotes or dimming controls. Our cool core heat sync keeps OSRAM LEDS cool to allow maximum output for as long as you need it.IP-69 Waterproof HousingThis light bar was engineered to withstand the harshest marine elements, it has been thoroughly tested and has achieved an industry-best IP-69 rating, allowing it to be completely submerged without an issue.Easy to InstallThe Lowpro Light Bar is designed to mount to any type of boat or T-top and is thoughtfully crafted with long cords for easy integration into your boat's power supply. Need more light? Lowpro can be mounted in an array pattern.Do It At NightSee more than your competition, Turn night into day, and put your mind at ease with the ability to see channel markers, boats, buoys, and other hazardous objects. The Lowpro Light Bar is 20% brighter than any other low-profile light on the market.Marine RatedThe Lowpro Light Bar is built to last. Its die-cast aluminum housing and DuPont powder coating is designed to withstand heavy doses of salt water, and UV radiation and can even be immersion up to 3 feet for over 60 hours.What's In The Box? Surface Mount Light 4' Attached Tinned Copper Cord 2 Standard Foot Mounts 316 Stainless Steel Hardware Features: Insanely Bright - 12,000+ TRUE measured lumens Dimmable intensity Adjustable angled foot attachments Lifetime Warranty Powered by 18 OSRAM LEDs 4 Foot cord for easy installs Marine-grade waterproof housing Baricoat Ceramic Shield Technology Lifetime Support Powder-Coated Die Cast Aluminum Construction Available in flood or spot configurations Marine grade IP69K waterproof housing Specifications: Beam Pattern: Flood Housing: Black Length (Inches): 19" Voltage - Input Range (Volts): 12v Box Dimensions: 3"H x 6"W x 21"L WT: 4 lbs UPC: 850044517794

Read more less

Oval 2-Pin Base f/Angled Pole - BlackPart #: 91022-7These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.Features: Oval 2-Pin Base specifically for angled pole Black WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Illusion Flush Mount LED Down Light - Warm White - Dimming - White HousingThe Illusion Series is designed to have an ultra-thin profile with a seamless, clean look and incorporating industry-first materials and processes.  Unique in styling and highly versatile in appearance the Illusion Down Light will launch the series. A bezel-free design allows for a wafer-thin profile with a shallower mounting depth than the current Mirage light. However, it still incorporates the convenient butterfly clip mounting system with no exposed fasteners. The Illusion Down Light will be compatible with our new Intelligent  “Sound-to-Light” feature when paired with a Poco 4 module. Color output options will be warm white/spectrum, cool white/spectrum, and single color white and warm white output. A proprietary finishing process allows for unique industry-first designs incorporating metallic colors and many other styling options. This unparalleled flexibility adds a new level of customization to the downlight category to meet the contemporary design and color pallets of today’s boats.Ultra Thin ProfileThe Illusion Down Light has a wafer-thin profile for a seamless, clean look. Chemically hardened glass reduces the thickness of the light's face, while a shallow housing further reduces the space required to mount it on hardtops and interior ceilings.Unique Finishing OptionsA proprietary finishing process was developed for the Illusion Down Light that allows unique finishes to be applied to the face of the light. The customizable options are endless, from the illusion of a bezel to contemporary metallic colors, wood grain, and metal finishes.Butterfly Mount ClipThe Illusion Down Light will retain the convenient butterfly mount clip system found on the Mirage series of downlights for easy installation with no exposed fasteners. This tried and tested mounting system will speed up the installation process while reducing overall complexity.Poco CompatibilityThe Illusion Down Light is PLI-enabled, meaning the internal "Power Line Instruction" technology built into the light makes it compatible with our award-winning Poco Digital Lighting Control system. This will allow for lighting control when paired to a Poco module for precise color selection, dimming, and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Features: Power line instruction 2-wire hookup Dimming IP Rated Warm White 3-Year Warranty Specifications: 12v DC Amps: 430mA 24v DC Amps: 230mA Correlated Corrected Temperature (CCT): 5000 CE Certified: Yes Color Match Commitment (CM): Yes Color Output: Warm White Color Rendering Index (CRI): 80+ Depth: 0.7 in (1.77cm) Diameter: 2.5in (6.35cm) Finish/Housing: White Housing IP Rating: 67 Lumens: 285 Op. Temp F/C: -31/35 to + 131/55 F PLI Enabled: Yes Related Watts: 6W Sub Category: Dome & Down Lights Third-Party Dimmer Compatibility (3PD): No Timed Toggled Protocol (TTP): Yes UL Certified: No Voltage: 10-30 VDC

Read more less

Low Pro™ Marine Spreader Light - Flush Mount - White Housing - Amber LEDThe Most Advanced Marine Spreader Light! The Low Pro™ Spreader is crafted for maximum functionality and ease of use, giving you complete control over your lighting with three built-in settings. Operated through any standard or digital switch, you can toggle between 100% brightness, 50% brightness, or halo-only without needing separate dimmers or specialty switches. These integrated features make achieving the perfect lighting for any situation effortless.The Low Pro™ Spreader Light enhances your boat's style with its sleek and bold design, offering functionality and sophistication. The integrated halo ring lighting adds a clean, modern touch, making it a standout feature for any marine vessel. More than just an aesthetic upgrade, the halo accent light is practical too—providing subtle, ambient lighting that’s perfect for nighttime docking, fishing, or creating a refined atmosphere. Whether you're looking for the best customizable marine lighting or a way to elevate your boat's appearance, the Low Pro™ Spreader delivers on all fronts.Select the Setting You WantEasily customize your lighting with a simple toggle of the switch. The first toggle activates the spreader at 100% brightness for full illumination. The second toggle on/off reduces it by 50% for a softer glow, and the third toggle on/off powers only the halo ring for a stylish accent or subtle nighttime visibility. Not Just for LooksThe halo feature is more than just a bold accent for your boat - it's also a practical lighting solution. Power up the halo at night to softly illuminate the deck without compromising your night vision. Ready to light up your whole boat?Built to LastEngineered to endure the harshest environments, these lights are designed to meet IP69K standards - the highest level of protection against water, dust, salt, condensation, and extreme temperatures. Whether facing salt spray, blazing sun, snow, or high-pressure water, they deliver reliable performance every time. Built for durability and backed by our lifetime warranty, trust you're investing in quality that lasts as long as your adventures! Brightest Spreader on the MarketThe Low Pro™ Spreader delivers unparalleled brightness for its size, making it the brightest marine spreader available, ideal for professional and recreational boaters. With an impressive 2,000 lumens and a wide 120-degree beam pattern, it ensures maximum visibility for every task.Features: Customizable Light Settings: Easily toggle between 100%, 50%, or Halo-only modes to suit your needs. Accent Halo Options: Available in white, blue, red, or amber to match your style or function.  High-Performance Brightness: Produces 2,000 lumens for superior illumination.  Wide Coverage: Features a 120° beam spread to light up large areas with ease.  Marine-Grade Durability: Built with IP69K waterproof housing to withstand harsh marine environments. Easy Integration: Connect seamlessly to your digital or physical switch for hassle-free control.  Versatile Power Compatibility: Operates on a wide range of 9-36V DC inputs.  High-Grade Polycarbonate Bezel: Designed to easily snap on, the bezel conceals all mounting hardware for a clean, seamless finish. Unlike a powder-coated finish, it resists fading and flaking over time, even in the toughest saltwater environments. Plug-and-Play: Engineered with a footprint similar to most standard spreader lights, allowing for easy easy installation without the need for custom modifications. What's in the Box? Flush-Mount Low Pro™ Spreader Light 3/16 Stainless Steel Mounting Screws

Read more less

D-Series Lens Cover - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

Radiance + Curved 40" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ Curved RBGW light bars. The latest addition to the Radiance light family provides the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ Curved RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary RDS-Series but include a stylish color-changing backlight.Inside, the Radiance+ Curved RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ Curved RGBW light bars take the customization of your vehicle to the next level. Own the night in style with Radiance+ RBGW lighting.Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits All RDS-Series Light Covers And Mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 40-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 40"  Weight (Lbs): 11.50 Optics: Spot drive Watts: 179 Amp Draw: 12.8     Raw Lumens: 16632 Specifications: Beam Pattern: Spot-Driving Combo Housing: Black Length (Inches): 40" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 9"W x 45"L WT: 14.85 lbs UPC: 849774034213

Read more less

D-Series Lens Cover - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

E-Series, RDS-Series & Radiance+ Lens Cover 10" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

Zephyr LED Spreader/Deck Light - Brushed, Black Base - White Non-DimmingLumitec's spreader light is equally well suited to lighting the foredeck of an elegant sloop or the cockpit of a sport yacht. Mounted on spreaders, spars, radar arches or towers and flybridges at a mounting height of 16 feet, our spreader light brightly illuminates an area nearly 24 feet in diameter with more than 1,000 lumens+. Positionable, sleek and versatile with unsurpassed reliability - meaning no more costly and complex bulb replacements.Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 4.49in (11.41cm) Depth: 2.83in (7.20cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 5"H x 5"W x 5"L WT: 0.6 lbs UPC: 089300013262

Read more less

LED Chart/Map Light - FlexiblePolished Aluminum & Chrome BaseProduct DescriptionDon't get caught in the dark when trying to navigate! Our new NAV station light offers both Red and Warm White in one. Both colors put out plenty of light to read by and look elegant too. RED AND WHITE LIGHT IN ONE Ultra Bright LED's Stylish Modern Design Includes built in Switch Uses only 1W Input Voltage: 12, 24, and 32V systems Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24/32v Housing: Stainless LED Color: White/Red Dimming: No Box Dimensions: 3"H x 7"W x 11"L WT: 0.79 lbs UPC: 854760002374

Read more less

Square Mirage Down Light - White Dimming, Red/Blue Non-Dimming - Polished BezelFeatures: Blends harmoniously with today's contemporary designs Boasts incredible output & is among the slimmest in the industry Exceeds the output of 20W halogens by up to 300% Water sealed for interior or exterior use Spring Mounting Clips for easy installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes LED Color: White/Blue/Red Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs UPC: 089300161185

Read more less

Mini Mount Plug-In Type Base(1049) Plain Black Cap Insert and Waterproof Snap-On Cover Black Plastic Base Pigtail Leads Cap Type Black# of Pins 2O.D. Base Dims 1-15/16Fits Figs. 1401, 1441, and 1461 Series All-Round Pole Lights and 1614 Series Bi-Color Pole Lights Quick Guide (pdf)

Read more less

Surface Mount Dome Light(0300) Bronze Base Brass Body Polished Chrome Plated for 12, 24 and 32 Volts Tech InfoO.D. Globe Base: 4"O.D. Base: 5"Depth: 1-7/8"Wattage of Bulb: 11wMax Wattage: 17w Specifications: LED: No Voltage - Input Range (Volts): 12/24/32v Dimming: No Housing: Chrome Plated LED Color: White Bulb Watts: 11w Box Dimensions: 3"H x 7"W x 10"L WT: 0.85 lbs UPC: 085226095061 Quick Guide (pdf)

Read more less

A3 Downlight - Surface/Flush Mount - Stainless SteelThis Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off). Features: 316 stainless steel trim 6 x 0.5-watt warm white LED 242 Lumens 2.2 Watt 12 Volt   IP67 Applications: A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture *The "P" within the part number indicates retail packaging Specifications: Bulb Watts: 0.5 Housing: Stainless LED Color: Warm White LED: Yes Box Dimensions: 2"H x 5"W x 7"L WT: 0.2 lbs UPC: 786142413730

Read more less

Pro Series 3.0 Curved Double Row 20" LED Light Bar - Combo Optics - White HousingFrom the second Black Oak's 20" LED light bar is used, users will never hit the open waters without it. This is the perfect marine light bar for docking, interior, exterior, search, and navigation. This waterproof light bar comes in a white or black powder-coated color scheme and will give users a fantastic look and even better functionality!With Black Oak's IP69K rating, users don't have to worry about ever getting moisture inside any part of this curved LED light bar. Backed by Black Oak's limited lifetime warranty, users won't have to even take the risk.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant Activities & Uses:  Marine Spot light T-Top boat light Jeep hood light UTV dune riding Lower bumper truck lights Technical Specifications: Total Wattage: 200W Amp. Draw: 8.4 LED Quantity: 40 Weight: 7.8 lbs. Raw Lumens: 26,400 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height) – 21.4" x 4.125" In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: White Length (Inches): 20" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 6"W x 25"L WT: 8 lbs UPC: 860470002207

Read more less

Radiance + 50" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ RBGW light bars. The latest addition to the Radiance light family provides you with the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series but include a stylish color-changing backlight.Inside, the Radiance+ RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ RGBW light bars take customization to the next level. Own the night in style with Radiance+ RBGW lighting.Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits all E-Series light covers and mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 50-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 50"  Weight (Lbs): 14.00 Optics: Spot drive Watts: 230 Amp Draw: 16.4 Raw Lumens: 21384 Lux at 10m: 3015.09 Beam Distance at 1Lux: 549.1 Beam Distance at .25 Lux: 1098.2 Peak Beam Intensity (cd): 301509 Horizontal Beam Angle: 19.7 Specifications: Beam Pattern: Spot-Driving Combo Housing: Black Length (Inches): 50" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 7"W x 54"L WT: 17.1 lbs UPC: 849774034183

Read more less

Wireless Remote Spot Light Universal 12/24V circuit with bright 100W, H3 halogen bulb UV resistant, IP56 Weatherproof ABS housing and Lexan® lens O-ring sealed housing, designed for the harsh marine environment - moisture, salt, shock and vibration tested Universal snap-in mounting system (can be mounted upside down) Super-quiet, all-weather motor with limit stops provides a full range of coverage 370° sweep and 120° Tilt (75° up and 45° down) One touch auto sweep and S.O.S. function Wireless dash mount remote standard; (hard wired & handheld remotes are optional) 3-Year limited warranty Bulb: 100W, H3 HalogenPower (Input voltage): 12/24V Current draw (idle/in use): 0.03 amps / 7.0 ampsPeak Beam Intensity: 210,000 CpPeak Beam Distance: 917' (280M)Lux @ 66' (20M): 525 LuxCoverage at 66' (20M): 132 sq ft (12 sq m)Rotation: 370° (built in limit stops)Tilt: 120° Tilt (75° up & 45° down)Wireless range: 200' (65M)Dimensions: 7.5"W x 7.5"H x 9.25"D (19cm x19cm x 23.5cm)Weight: 3.30lbs (1.5 kg)Housing material: UV resistant PC/ASALens material: UV resistant Lexan®Operating temp range: 5°F - 113°F (-15°C -45°C)IP Rating: IP56WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Wireless: Yes Voltage - Input Range (Volts): 12/24v Candle Power: 210,000 Bulb Watts: 100w LED: No Box Dimensions: 8"H x 9"W x 10"L WT: 4.6 lbs UPC: 093344050947 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Slim 5" Dome Light - Warm White/Blue - 10-30VThis low-profile dome light has warm white and blue LEDs.Features: 12/24V, 6W 390 Lumens 26 Color LED (blue) Surface mount IP65 Touch switch Switch glows blue Specifications:Dimensions: 5 in. diameter & 1/2 in. height*The "P" within the part number indicates retail packaging Specifications: Bulb Watts: 6 LED Color: White/Blue LED: Yes Box Dimensions: 1"H x 7"W x 10"L WT: 0.35 lbs UPC: 786142414614

Read more less

Radiance + 40" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ RBGW light bars. The latest addition to the Radiance light family provides you with the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series but include a stylish color-changing backlight.Inside, the Radiance+ RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ RGBW light bars take customization to the next level. Own the night in style with Radiance+ RBGW lighting.Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits all E-Series light covers and mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 40-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 40"  Weight (Lbs): 11.30     Optics: Spot drive Watts: 179 Amp Draw: 12.8 Raw Lumens: 16632 Lux at 10m: 2595.99 Beam Distance at 1Lux: 509.5 Beam Distance at .25 Lux: 1019     Peak Beam Intensity (cd): 259599 Horizontal Beam Angle: 18.5 Specifications: Beam Pattern: Spot-Driving Combo Housing: Black Length (Inches): 40" Voltage - Input Range (Volts): 12v Box Dimensions: 7"H x 7"W x 44"L WT: 14.15 lbs UPC: 849774034176

Read more less

SF100B 100W/120VAC - Underwater Dock Light - Blue Anchored To BottomFire up a fish-feeding frenzy with the original SF100B Underwater FishLight. This powerful light features our IntesiTech Right Bright LEDs that deliver unmatched intensity—the exact light frequency fish recognize and respond to.The SF100B is designed to anchor to the bottom, projecting upward. Protected by our shatter-resistant HydroDome and Elude eco-friendly barnacle-resistant coating, it's built with rugged aluminum and sealed with Impervia no-porosity marine epoxy for lasting performance in harsh environments.Each light includes a 50' cord (extra lengths available) and is perfect for creating a "See The Light" Safe Zone that attracts fish to your dock, waterfront dining area, or favorite fishing spot. The SF100B also helps "Bring 'Em Up" from deeper waters during warm summer months when fishing is typically more challenging.Made in America. Built right. Backed by our "Proven Attraction" Performance Guarantee.Technical Specifications:SF model lights should not be turned on in the air for longer than 2 minutes. 96 high-power LEDs are used to better illuminate an area from underwater in a 120deg field. For a wider spread of light, place the light deeper in the water. The SF series uses a 48V driver, which is IP67 rated with a 6’ cord on the input side and needs to be plugged into 120VAC. This driver can be left outside in the rain without worry.  Voltage: 48VDC (With 100W 120VAC driver) Current Draw: 0.42A Power Draw: 50W Lumen Output 84 lumen/LED with 96LEDs = 8080 total lumen output in one direction Length 9” total length including 4” cord grip Diameter 4” Wavelength 525 nm Weight: 4.2 lbs 50 foot cord included with an IP68 waterproof locking connector to the driver. Driver has 1’ of length on output side and 6’ length on input side. Specifications: Color: Blue Watts: 100 Voltage - Input Range (Volts): 120 Box Dimensions: 7"H x 8"W x 9"L WT: 4.6 lbs UPC: 814347001022

Read more less

Full Spectrum Hub - 2 OutputsOur F-HB-2-FS5 Hub simplifies installation allowing for 2 RGBW fixtures to be connected to one power source. It also allows you to daisy-chain the data signal between those 2 fixtures, as well as between additional fixtures on other hubs.  Features: ABYC Compliant IP68 & IPX8 Tested

Read more less

Radioray GT Series Permanent Mount - White Halogen - Hard Wired Dash Mount RemoteThe GT series is the culmination of our dedication to continual improvement. The GT series incorporates all of the features that have made Golight the industry standard in remote control lighting, but incorporates upgrades that enhance the lamp’s durability as well as the overall user experience. GT SERIES UPGRADES: Updated exterior housing design Higher torque drivetrain and more precise pan / tilt control  Increased Ingress protection from dust/water (IP56)  Permanent mount models boast a robust 14 gauge stainless steel mounting bracket Portable magnetic models have 2X magnetic grip Enhanced resistance levels associated with shock, vibration, and impact 10 High Flux LED’s GT SERIES FEATURES: Wireless or Hardwired Remote Control Options Permanent or Portable Mounting Options Halogen or LED Light Head 370° Rotation x 135° Tilt UV Ray and Saltwater Resistant 3 Year Limited Warranty Specifications: Wireless: No Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 8"H x 8"W x 9"L WT: 6 lbs UPC: 793523000038

Read more less

Radioray GT Series Permanent Mount - Black Halogen - Wireless Handheld RemoteThe GT series is the culmination of our dedication to continual improvement. The GT series incorporates all of the features that have made Golight the industry standard in remote control lighting, but incorporates upgrades that enhance the lamp’s durability as well as the overall user experience. GT SERIES UPGRADES: Updated exterior housing design Higher torque drivetrain and more precise pan / tilt control  Increased Ingress protection from dust/water (IP56)  Permanent mount models boast a robust 14 gauge stainless steel mounting bracket Portable magnetic models have 2X magnetic grip Enhanced resistance levels associated with shock, vibration, and impact 10 High Flux LED’s GT SERIES FEATURES: Wireless or Hardwired Remote Control Options Permanent or Portable Mounting Options Halogen or LED Light Head 370° Rotation x 135° Tilt UV Ray and Saltwater Resistant 3 Year Limited Warranty Quick Guide (pdf)

Read more less

High-Output Elongated Underwater Light with Intelligent Monochromatic LED's - Blue, 90° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Blue light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BME1-H-B3-90 is a superior underwater Blue LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 45.5W Dimensions - 7.23" (W) x 2.91" (H) x 1.09" (D) Weight - 2.42 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: Blue Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 45.5w Box Dimensions: 5"H x 9"W x 10"L WT: 4.8 lbs UPC: 850050884262

Read more less

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Blue, 45° Beam The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Blue light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BMR1-B3-45 is a superior underwater Blue LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° F  Specifications: Color: Blue Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 44w Box Dimensions: 4"H x 9"W x 10"L WT: 5.3 lbs UPC: 850050884019 Quick Guide (pdf)

Read more less

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Aqua, 45° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Aqua light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BMR1-A3-45 is a superior underwater Aqua LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: Aqua Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 44w Box Dimensions: 5"H x 9"W x 10"L WT: 5.25 lbs UPC: 850050884033

Read more less

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - White, 90° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BMR1-W3-90 is a superior underwater White LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: White Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 44w Box Dimensions: 5"H x 9"W x 10"L WT: 5.25 lbs UPC: 850050884064

Read more less

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Aqua, 90° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Aqua light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BMR1-A3-90 is a superior underwater Aqua LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: Aqua Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 44w Box Dimensions: 4"H x 9"W x 10"L WT: 5.3 lbs UPC: 850050884040

Read more less

High-Output Submersible Underwater Light with Intelligent Monochromatic LED's - Blue, 90° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Blue light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BMR1-B3-90 is a superior underwater Blue LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 44W Dimensions - 5.47" (Dia.) x 1.12" (D) Weight - 2.71 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122° F  Specifications: Color: Blue Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 44w Box Dimensions: 4"H x 9"W x 10"L WT: 5.2 lbs UPC: 850050884026 Quick Guide (pdf)

Read more less

High-Output Elongated Underwater Light with Intelligent Monochromatic LED's - White, 45° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BME1-H-W3-45 is a superior underwater White LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 45.5W Dimensions - 7.23" (W) x 2.91" (H) x 1.09" (D) Weight - 2.42 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: White Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 45.5w Box Dimensions: 5"H x 9"W x 10"L WT: 4.8 lbs UPC: 850050884293

Read more less

Single Color Hub - 4 OutputsOur F-HB-4-MC3 Hub simplifies installation allowing for 4 Single Color fixtures to be connected to one power source. It also allows you to daisy-chain the data signal between those 4 fixtures, as well as between additional fixtures on other hubs.  Features: ABYC Compliant IP68 & IPX8 Tested

Read more less

High-Output Elongated Underwater Light with Intelligent Monochromatic LED's - Aqua, 90° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Aqua light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BME1-H-A3-90 is a superior underwater Aqua LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 45.5W Dimensions - 7.23" (W) x 2.91" (H) x 1.09" (D) Weight - 2.42 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: Aqua Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 45.5w Box Dimensions: 5"H x 9"W x 10"L WT: 4.85 lbs UPC: 850050884286

Read more less

High-Output Elongated Underwater Light with Intelligent Full Spectrum LED's - RGBW, 45° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant color and color-changing light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. . Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 72 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important. Our F-Series RGBW Luminaires also integrate a separate white LED in each of the 18 individually optically lensed RGBW LED configurations, creating higher-quality whites and richer color blends than possible with traditional RGB+White fixtures.The F-BME1-H-FS-45 is a superior underwater RGBW LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 86W Dimensions - 7.23" (W) x 2.91" (H) x 1.09" (D) Weight - 3.41 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: Full Color RGBW Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 86w Box Dimensions: 5"H x 9"W x 10"L WT: 4.95 lbs UPC: 850050884316

Read more less

High-Output Elongated Underwater Light with Intelligent Monochromatic LED's - Aqua, 45° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Aqua light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BME1-H-A3-45 is a superior underwater Aqua LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 45° Input Voltage - 10VDC-30VDC  Power Consumption - 45.5W Dimensions - 7.23" (W) x 2.91" (H) x 1.09" (D) Weight - 2.42 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: Aqua Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 45.5w Box Dimensions: 5"H x 9"W x 10"L WT: 4.85 lbs UPC: 850050884279

Read more less

High-Output Elongated Underwater Light with Intelligent Monochromatic LED's - White, 90° BeamThe F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.The F-BME1-H-W3-90 is a superior underwater White LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.Clear Lens TechnologyOne of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!Anti-Condensation Assembly MethodologyCondensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!Technical Specifications: Beam Angle - 90° Input Voltage - 10VDC-30VDC  Power Consumption - 45.5W Dimensions - 7.23" (W) x 2.91" (H) x 1.09" (D) Weight - 2.42 lbs Lens Material - Clear Quartz Operating Temperature - -40 to 122°  Specifications: Color: White Material: AB2 Aluminum Bronze Mounting Style: Surface Voltage - Input Range (Volts): 10-30v Watts: 45.5w Box Dimensions: 5"H x 9"W x 10"L WT: 4.8 lbs UPC: 850050884309

Read more less