Show previous products

• 

  Quantity Add to cart

  Maretron Maretron RAA100-01 Rudder Angle Adapter

  $309.00

  Quantity Add to cart

• 

  View options

  Maretron Maretron TMP100-01 Temperature Module

  Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20 C to 80 C or -4 F to 176 F) cover a wide range of applications including cabin air temperature, engine room air temperature, refrigerator/freezer temperature, under bolt temperature (inverters, charges, pumps, motors, etc.), tank temperatures (live well bait, hot water, etc.), and air duct temperatures. The optional thermocouple probes (0 C to 900 C or 32 to 1652 F) are used to measure Exhaust Gas Temperature (EGT) as part of a comprehensive fuel management system. Best of all, the TMP100 is NMEA 2000®certified so you can view any and all temperature information anywhere on the vessel using a compatible NMEA 2000® display. The TMP100 is a key component of Maretron's N2KView® vessel monitoring and control system. FEATURES Six External Temperature Probes are Measured and Broadcast Over NMEA 2000 Network Four Channels for Thermistor Probes and 2 Channels for High Temperature Thermocouple Probes Wide Variety of Applications Supported with Optional Temperature Probes APPLICATIONS Cabin Temperature Engine Room Temperature Under Bolt Temperature (Inverters, Chargers, Pumps, etc.) Refrigerator/Freezer Temperature Tank Temperatures (Live Well Bait, Hot Water, etc.) Air Duct Temperature Exhaust Gas Temperature

  Read more less

  $305.00

  View options

• 

  View options

  Maretron Maretron RIM100-01 Run Indicator Module

  Maretron?s Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000® network, whether or not the electrical circuit is energized and running. The RIM100 works equally as well for monitoring manually switched loads (e.g., running lights, anchor lights, or deck lights) as it does for automatically switched loads. Monitoring automatically switched loads (e.g., bilge pumps, engine exhaust/intake fans, and transfer pumps) via the RIM100 is especially useful because you know exactly when equipment is, or isn't running. Best of all, the RIM100 is NMEA 2000® certified so you can view any and all run indicator status anywhere on the vessel using a compatible NMEA 2000® display. The RIM100 is a key component of Maretron's N2KView® vessel monitoring and control system. APPLICATIONS Monitors and reports the running status of connected devices Works with both AC and DC loads Works with both automatically and manually switched loads Can indicate the status of a wide variety of loads Bilge Pumps Winches Running Lights Transfer Pumps Exhaust/Intake Fans

  Read more less

  $300.00

  View options

• 

  Quantity Add to cart

  Maretron Maretron GPS200-01 N2K GPS Antenna Waas Capable

  GPS200 - NMEA 2000® GPS Antenna/Receiver Maretron's GPS200 is a state-of-the-art 32 channel GPS antenna and receiver capable of providing five position fixes per second, accurate boat speed four times per second, and precision time once per second. An additional benefit of the GPS200 is that it broadcasts precision magnetic variation information using the current position and world magnetic model (WMM-2010). The GPS200 antenna/receiver is a plug-and-play device that is fully compliant and certified to the NMEA 2000® Standard. It will directly connect to any NMEA 2000® network and communicate with navigational software, chart plotters, autopilots and dedicated instrument displays ? such as Maretron's N2KView® Vessel Monitoring and Control system or DSM250 graphical display ? and its compact, waterproof housing provides years of reliable performance. The GPS200 automatically decodes GPS correction signals from Satellite Based Augmentation Systems (SBAS) including the North American Wide Area Augmentation System (WAAS), the European Geostationary Navigation Overlay System (EGNOS), or the Asian Multifunctional Transport Satellite-based Augmentation System (MSAS) to provide better than 2.5m accuracy. The GPS200 is easily mounted to any 1? standard marine mount with its standard 1??14 male threads. It can also be mounted directly to a deck, or even (due to it's unprecedented sensitivity) underneath a fiberglass deck. FEATURES Latitude Longitude Time Date Course Over Ground Speed Over Ground Magnetic Variation Satellite Status APPLICATIONS Navigation Autopilot AIS

  Read more less

  $295.00

  Quantity Add to cart

• Sale -$18.01

  View options

  Maretron Maretron RAA100 Rudder Angle Adapter [RAA100-01]

  RAA100 NMEA 2000®Rudder Angle AdapterThe RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200.The RAA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the RAA100 can be calibrated for any resistance between 0 and 300 ohms.You can also use the RAA100 with existing analog gauges so you don't have to give up your existing analog gauges to enjoy the advantages of digitally networked information.Features:Rudder AngleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

  Read more less

  $309.00 $290.99

  View options

• Sale -$18.01

  Quantity Add to cart

  Maretron Maretron TMP100 Temperature Module [TMP100-01]

  Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20 deg. C to 80 deg. C or -4 deg. F to 176 deg. F) cover a wide range of applications including cabin air temperature, engine room air temperature, refrigerator/freezer temperature, under bolt temperature (inverters, charges, pumps, motors, etc), tank temperatures (live well bait, hot water, etc) and air duct temperatures. The optimal thermocouple probes (0 deg. C to 900 deg. C or 32 deg. F to 1652 deg. F) are used to measure Exhaust Gas Temperature (EGT) as part of a comprehensive fuel management system.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

  Read more less

  $305.00 $286.99

  Quantity Add to cart

• Sale -$18.01

  Quantity Add to cart

  Maretron Maretron RIM100 Run Indicator Module [RIM100-01]

  RIM100 Run Indicator ModulePart #: RIM100-01Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit is energized and running. The RIM100 works equally as well for monitoring manually switched loads (running lights, anchor lights, or deck lights) as it does for automatically switched loads. Monitoring automatically switched loads (bilge pumps, engine exhaust/intake fans, and transfer pumps) via the RIM100 is especially useful because you know exactly when equipment is, or isn't running.Features: Monitors and reports the running status of connected devices Works with both AC and DC loads Works with both automatically and manually switched loads Can indicate the status of a wide variety of loads: Bilge bumps, Winches, Running lights, Transfer pumps, Exhaust/intake fans WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

  Read more less

  $300.00 $281.99

  Quantity Add to cart

• Sale -$17.01

  View options

  Maretron Maretron Submersible Pressure Transducer - 0-1.5 PSI [PTS-0-1.5PSI-02]

  Submersible Pressure Transducer - 0-1.5 PSIThe submersible pressure transducers are used together with Maretron's Fluid Pressure Monitor (FPM100), which allows tank fluid level to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000® display. When used together with Maretron displays, alerts can be set to inform the user of low or high tank levels. Users can be notified through emails or text messages about their tank levels when not onboard the vessel. Additionally, the tank levels can be stored using Maretron's data recorder (VDR100) for later analysis.

  Read more less

  $296.00 $278.99

  View options

• Sale -$17.01

  Quantity Add to cart

  Maretron Maretron GPS200 NMEA 2000 GPS Receiver [GPS200-01]

  GPS200 - NMEA 2000 GPS Antenna/ReceiverMaretron's GPS200 provides reliable position fixes 10 times per second, accurate boat speed four times per second, and precision time once per second. The GPS200 antenna/receiver is a plug-and-play device that is fully compliant and certified to the NMEA 2000 Standard. It will directly connect to any NMEA 2000 network and communicate with navigational software, chart plotters, autopilots and dedicated instrument displays - such as Maretron's N2KView Vessel Monitoring and Control system or DSM250 graphical display - and its compact, waterproof housing provides years of reliable performance.The GPS200 automatically decodes GPS correction signals from Satellite Based Augmentation Systems (SBAS) including the North American Wide Area Augmentation System (WAAS), the European Geostationary Navigation Overlay System (EGNOS), or the Asian Multifunctional Transport Satellite-based Augmentation System (MSAS) to provide better than 3m accuracy.The GPS200 is easily mounted to any 1" standard marine mount with its standard 1"-14 male threads. It can also be mounted directly to a deck.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 4"H x 7"W x 10"L WT: 0.9 lbs UPC: 873804000268 Quick Guide (pdf)Owner's Manual (pdf)

  Read more less

  $295.00 $277.99

  Quantity Add to cart

• 

  Quantity Add to cart

  Maretron Maretron ALM100-01 Alarm Module

  Maretron ALM100-01 Alarm ModuleModel: ALM10001 NMEA 2000 Network Interface Super loud 105dB audible alarm Bright Red LED visual alarm Green LED status indicator Multiple selectable alarm patterns Waterproof - Can be mounted indoors or outdoors Maretron's Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105 dB SPL Piezoelectric sounder, along with a red high-brightness LED to indicate an alarm condition. A second green LED incidates that the Alarm Module is powered and ready to be triggered. The audible alarm can sound any one of 32 distinct pre-programmed patterns to indicate different alerts.The Alarm Module can be triggered by alarms generated by Maretron's N2KView Vessel Monitoring System, or by Maretron's DSM250 Color Graphics Display.The Alarm Module mounts in a standard electric box or can be flush mounted on any surface. Completely waterproof, the Alarm Module can be mounted inside or outside the vessel. Best of all, the ALM100 is NMEA 2000® certified so you can install alarms anywhere on the vessel. The ALM100 is a key component of Maretron's N2KView® vessel monitoring and control system.What's in the Box:Maretron ALM100-01 Alarm Module

  Read more less

  $269.00

  Quantity Add to cart

• Sale -$16.01

  View options

  Maretron Maretron IRHT-01 Indoor Humidity/Temperature Sensor [IRHT-01]

  Indoor Humidity/Temperature SensorThe IRHT-01 is used in conjunction with Maretron's Current Loop Monitor (CLM100), which allows indoor humidity and temperature to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000® display. When used together with a Maretron displays, alerts can be set so the user can be informed of abnormal or detrimental conditions. And when not onboard the vessel, users can be notified through emails or text messages. Additionally, the relative humidity and temperature can be stored using Maretron's data recorder (VDR100) for later analysis.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

  Read more less

  $282.00 $265.99

  View options

• 

  Quantity Add to cart

  Maretron Maretron TLA100-01 Tank Level Adapter

  TLA100 - NMEA 2000 Tank Level AdapterThe TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM200. The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the TLA100 can be calibrated for any resistance between 0 and 300 ohms. Unlike most tank senders that only work with rectangular tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of the tanks. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information. FEATURES Tank Level Tank Capacity Fluid Type APPLICATIONS Fuel Tanks Fresh Water Tanks Grey Water Tanks Black Water Tanks Live Well Tanks Oil Tanks

  Read more less

  $263.00

  Quantity Add to cart

• 

  View options

  Maretron Maretron TLM150-01 Gasoline Tank Level Monitor 24" Depth

  Maretron's TLM150 is used to sense gasoline fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM150 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Once the TLM150 calculates and broadcast the fluid level over the NMEA 2000® network, you can observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM250. The TLM150 is capable of sensing gasoline levels in tanks up to 24? (0.61m) in depth (see TLM100 for fluid types other than gasoline in tanks up to 40" or the TLM200 for tanks up to 104"). Unlike most tank senders that only work with rectangular tanks, the TLM150 can be calibrated for irregular tank shapes so you can know the true fluid level in your tanks. The TLM150 is mounted directly to the top of tanks using the industry standard SAE J1810 5-hole mounting pattern. The TLM100 can also be mounted to tanks with threaded tank openings using optional adapters that include both a 1.5" NPT and a 1.25" BSP adapter. The other important optional accessory for the TLM150 is the focus tube to permit use on boats with planing hulls, which is required if the vessel spends a significant amount of time with the bow pitched up. Most importantly, the TLM150 is NMEA 2000® certified so you can view any and all tank levels anywhere on the vessel when using a compatible NMEA 2000® display. The TLM150 is another key component of Maretron's N2KView® vessel monitoring and control system.

  Read more less

  $260.00

  View options

• Sale -$16.01

  Quantity Add to cart

  Maretron Maretron Alarm Module [ALM100-01]

  Maretron's Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105 dB SPL Piezoelectric sounder, along with a red high-brighness LED to indicate an alarm condition. A second green LED indicated that the Alarm Module is powered and ready to be triggered. The audible alarm can sound any one of 32 distinct pre-programmed patterns to indicate different alerts. The Alarm Module can be triggered by alarms generated by Maretron's N2KView Vessel Monitoring System, or by Maretron's DSM250 Color Graphics Display. The Alarm Module mounts in a standard electric box or or can be flush mounted on any surface. Completely waterproof, the Alarm Module can be mounted inside or outside the vessel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

  Read more less

  $269.00 $252.99

  Quantity Add to cart

• Sale -$15.01

  Quantity Add to cart

  Maretron Maretron TLA100 NMEA 2000 Tank Level Adapter [TLA100-01]

  TLA100 NMEA 2000®Tank Level AdapterThe TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200.The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the TLA100 can be calibrated for any resistance between 0 and 300 ohms.Unlike most tank senders that only work with rectangular tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of the tanks. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information.Features: Tank Level Tank Capacity FLuid Type WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 2"H x 7"W x 10"L WT: 0.9 lbs UPC: 873804000091 Quick Guide (pdf)Owner's Manual (pdf)

  Read more less

  $263.00 $247.99

  Quantity Add to cart

• 

  Quantity Add to cart

  Maretron Maretron NF-NM4P-NF Mini Powertap Female-Female with Fuses

  Maretron NF-NM4P-NF Power TapModel: NF-NM4P-NF Connects power supply to NMEA 2000® Trunk Line in convenient plug/play fashion Replaceable fuses to protect bus and connected components from excessive current A Powertap is connected to a network backbone just like any Tee but rather than connecting a device, its purpose is to provide "bus" power. Typically a Powertap is placed as central as possible between total devices on backbone. Maretron Powertap uniquely provides two power inputs permitting doubled power provision for devices.

  Read more less

  $247.70

  Quantity Add to cart

• Sale -$15.01

  Quantity Add to cart

  Maretron Maretron TLM150 Tank Level Monitor [TLM150-01]

  The TLM150 is used to sense levels of gasoline tanks using ultrasonic technology and transmit the gasoline levels over the NMEA 2000 network. This allows you to observe gasoline tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM250. The TLM150 is capable of sensing gasoline tanks up to 24" in depth. Unlike most tank senders that only work with rectangular tanks, the TLM150 can be calibrated for irregular tank shapes so you can know the true level of your tanks. It is desigend to operate within the harsh demands of the marine environment.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

  Read more less

  $260.00 $244.99

  Quantity Add to cart

• Sale -$15.01

  View options

  Maretron Maretron High-Temperature Smoke/Heat Detector Kit [SH-003]

  High-Temperature Smoke/Heat Detector KitMaretron's High-Temperature Smoke/Heat Detector Kit is an intelligent NMEA 2000® networked solution, designed to alert you of unusually fast rises in temperature or smoke.This kit contains a smoke/heat detector, auxiliary relay, and sounder that are designed to work in high-temperature marine environments, such as engine rooms. The components in this kit are rated from -25°C (-13°F) to +70°C (158°F). This system is designed to work with a 24 VDC power supply.Features: Kit contains a smoke/heat detector, auxiliary relay, and sounder Designed to work in high-temperature marine environments, such as engine rooms Connects to an NMEA 2000® network via a Maretron SIM100 Switch Indicator Module (sold separately) Rated from -25°C (-13°F) to +70°C (158°F) For use with a 24 Volt DC power supply

  Read more less

  $252.00 $236.99

  View options

• Sale -$14.71

  Quantity Add to cart

  Maretron Maretron Mini Powertap [NF-NM4P-NF]

  Mini PowertapA powertap is connected to a network backbone just like any Tee but rather than connecting a device their purpose is to provide "bus" power. Typically a Powertap is placed as central as possible between total devices on backbone. Maretron Powertap uniquely provides two power inputs permitting doubled power provision for devices. Connects power supply to NMEA 2000® Trunk Line in convenient plug/play fashion Replaceable fuses to protect bus and connected components from excessive current Provides LED status indication of power and correct polarity connection for simple diagnostics. Power cord not included   

  Read more less

  $247.70 $232.99

  Quantity Add to cart

• 

  Quantity Add to cart

  Maretron Maretron Starter 2 Kit NMEA200 NMEA 2000 Starter Kit

  Maretron Micro Cable Starter Kit2Model: CABLESTARTER2What's in the Box: Micro Powertap Micro Male terminators x 2 Micro Tees x 2 Micro 2m Cable x 2 Micro 10m Cable x 1c

  Read more less

  $225.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Maretron Maretron TLM100-01 Tank Level Monitor 40" Depth Tanks

  Maretron's TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Once the TLM100 calculates and transmits the fluid level over the NMEA 2000® network, you can observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM250. The TLM100 is capable of sensing fluid levels in tanks up to 40? (1.02m) in depth. It can be used for diesel, fresh water, waste water, black water, and oil tanks (see TLM150 for gasoline tanks or TLM200 for deeper tanks). Unlike most tank senders that only work with rectangular tanks, the TLM100 can be calibrated for irregular tank shapes so you can know the true fluid level in your tanks. The TLM100 is mounted directly to the top of tanks using the industry standard SAE J1810 5-hole mounting pattern. The TLM100 can also be mounted to tanks with threaded tank openings using optional adapters that included both a 1.5" NPT and a 1.25" BSP adapter. There are other important TLM100 optional accessories including an airlock for black water applications, which keeps the face of the ultrasonic transmitter from fouling and an optional focus tube to permit use on boats with planing hulls, which is required if the vessel spends a significant amount of time with the bow pitched up. Most importantly, the TLM100 is NMEA 2000® certified so you can view any and all tank levels anywhere on the vessel when using a compatible NMEA 2000® display. The TLM100 is another key component of Maretron's N2KView® vessel monitoring and control system.

  Read more less

  $225.00

  Quantity Add to cart

• Sale -$12.96

  View options

  Maretron Maretron Pressure Transducer - 0 to 5000 PSI [PT-0-5000PSI-01]

  Pressure Transducer - 0 to 5000 PSIThis pressure transducer is designed to connect to the NMEA 2000® network via a Maretron FPM100 Fluid Pressure Module.Specifications: Range: 0 to 5000 PSI (344.74 bar) Accuracy: +/- 0.5% Full Scale Type: Absolute (no vent tube) Installation:All Maretron pressure transducer assemblies are equipped with a 1/4 in. NPT male threaded fitting. Install the pressure transducer to a 1/4 in. NPT female fitting on the system or tank is to be monitored with a maximum torque of 150 in-lbs (16.95 Nm).If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.

  Read more less

  $229.95 $216.99

  View options

• Sale -$13.01

  Quantity Add to cart

  Maretron Maretron NMEA 2000 Starter Kit 2 [CABLE-STARTER-2]

  NMEA 2000 Starter Kit 2 Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network.   Contacts are gold-plated brass and couplings are nickel-plated brass for durability and reliability.Included in the Box: (1) 5-Meter Micro Powertap Cable (CF-SPWR05-CF) (1) 10-Meter Micro Trunk/Backbone Cable (CM-CG1-CF-10.0) (2) Micro Tees (CM-CF-CF) (2) 2-Meter Micro Drop Cables (CM-CG1-CF-02.0) (2) Micro Terminators (TR-CM) *Sold as a Kit

  Read more less

  $225.00 $211.99

  Quantity Add to cart

• Sale -$13.01

  View options

  Maretron Maretron TLM100 Tank Level Monitor - 40" Depth Max - No Gas [TLM100-01]

  The TLM100 is used to sense levels of liquid tanks using ultrasonic technology and transmit the liquid levels over the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM250. The TLM100 is capable of sensing tanks up to 40" (1.02m) in depth. It can be used for diesel, fresh water, grey water, black water, and oil tanks. Unlike most tank senders that only work with rectangular tanks, the TLM100 can be calibrated for irregular tank shapes so you know the true level of your tanks. The TLM100 can be mounted on tanks with a SAE J1810 5-hole mounting pattern, or to tanks using 1.5" NPT or 1.25" BSP threaded openings via available adapters. The TLM100 has an optional airlock for black water applications to keep the face of the ultrasonic transmitter from fouling, and an optional focus tube to allow use on boats with planing hulls when the vessel spends a significant amount of time with the bow pitched up. Best of all, the TLM100 is NMEA 2000 certified so you can view any and all tank levels anywhere on the vessel using a compatible NMEA 2000 display. The TLM100 is a key component of Maretron's N2KView vessel monitoring and control system. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

  Read more less

  $225.00 $211.99

  View options

• 

  View options

  Maretron Maretron 0-5000 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $210.00

  View options

• 

  View options

  Maretron Maretron 0-50 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $203.00

  View options

• 

  View options

  Maretron Maretron 0-1000 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $202.00

  View options

• 

  Quantity Add to cart

  Maretron Maretron USB100-01 N2K To USB Gateway

  Maretron's USB100 is a gateway for bridging USB equipment using NMEA 0183 sentences - such as an on-board computer running navigational software - with an NMEA 2000&reg network. The gateway automatically converts incoming NMEA 2000&reg messages to NMEA 0183 sentences so you can continue benefiting from navigational and charting software that you already own while enjoying the many benefits of networked NMEA 2000&reg instruments. The USB100 translates a multitude of NMEA 2000&reg messages to NMEA 0183 sentences including GPS data, Speed Over Ground (SOG), Course Over Ground (COG), vessel heading, rudder angle, depth, speed, distance log, weather, wind and more. Maretron's USB100 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment). Its compact waterproof housing will provide years of reliable performance.

  Read more less

  $195.00

  Quantity Add to cart

• 

  View options

  Maretron Maretron CO-CO1224T Co Sensor

  Maretron CO-CO1224T Carbon Monoxide DetectorModel: CO-CO1224T listed to UL standard 2075 4 wire, system monitored Locals sounder Low current draw Alarm relay, form C trouble relay, Form A Dual LED's test/Hush button SEMS wiring terminals Specifications Volatage Nominal 12/24vDC Average standby current 20mA Maximum alarm current 40mA (75mA Test) Dimensions 5.1 x 3.3 x 1.1

  Read more less

  $195.00

  View options

• 

  Quantity Add to cart

  Maretron Maretron 0-5 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $189.00

  Quantity Add to cart

• Sale -$11.01

  Quantity Add to cart

  Maretron Maretron Carbon Monoxide Detector f/SIM100-01 [CO-CO1224T]

  Attaches to Maretron SIM100 for NMEA 2000 network monitoring Real Test technology allows for functional testing in the field Trouble relay for circuit trouble or detector end of life notification Provides wiring supervision 4-wire detector; mounts to wall or ceiling WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

  Read more less

  $195.00 $183.99

  Quantity Add to cart

• Sale -$11.01

  Quantity Add to cart

  Maretron Maretron USB100 NMEA 2000 USB Gateway [USB100-01]

  USB100 NMEA 2000® / USB GatewayMaretron's USB100 is a gateway for bridging USB equipment using NMEA 0183 sentences - such as an on-board computer running navigational software - with an NMEA 2000® network. The gateway automatically converts incoming NMEA 2000® messages to NMEA 0183 sentences so you can continue benefiting from navigational and charting software that you already own while enjoying the many benefits of networked NMEA 2000® instruments. The USB100 translates a multitude of NMEA 2000® messages to NMEA 0183 sentences including GPS data, Speed Over Ground (SOG), Course Over Ground (COG), vessel heading, rudder angle, depth, speed, distance log, weather, wind and more. Maretron's USB100 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment). Its compact waterproof housing will provide years of reliable performance. Features: Bearing Orig. to Dest. (BOD) Bearing to Waypoint (BTW) Distance to Waypoint (DTW) Velocity Made Good (VMG) Est. Time of Arrival (ETA) Time to Go (TTG) Cross Track Error (XTE) Set / Drift WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 5"H x 9"W x 12"L WT: 1.45 lbs UPC: 873804000039 Quick Guide (pdf)Owner's Manual (pdf)

  Read more less

  $195.00 $183.99

  Quantity Add to cart

• Sale -$11.01

  View options

  Maretron Maretron Pressure Transducer 0 to 1.5 PSI [PT-0-1.5PSI-01]

  Pressure Transducer 0 to 1.5 PSIFor use with FPM100 Fluid Pressure MonitorWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

  Read more less

  $189.00 $177.99

  View options

• Sale -$10.21

  View options

  Maretron Maretron Micro Double-Ended Cordset - 3M - *Case of 6* [CM-CG1-CF-03.0CASE]

  Micro Double-Ended Cordset - 3M - *Case of 6*Mechanical Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59" Electrical Current Rating: 4.0 Amps Voltage Rating: 250 VCable Outer Jacket Mat/Color: PVC/Gray Conductor Insulation Material: HDPE (data pair), SRPVC (power pair) Number of Conductors: 4X22 AWG, 22 AWG Drain Wire Shielding (3-Levels): FOIL (Overall), FOIL (Power Pair), FOIL (Data Pair) Environmental Protection Class: IEC IP68, NEMA 1,3,4,6P Temperature Rating: -40 deg C to 80 deg C to (-40 deg F to 176 deg F)Approvals (Cable) UL: PLTC 75 deg C Sunlight Resistant E90625,AWM 80 deg C 300V (Cable) CSA: CMX-OUTDOOR-CMG LL54185 75 deg C,AWM I/II A/B 80C 300V FT4 NMEA: NMEA 2000 Approved Specifications: Cable Length (Feet): 10' Box Dimensions: 1"H x 6"W x 8"L WT: 3.3 lbs

  Read more less

  $184.20 $173.99

  View options

• 

  View options

  Maretron Maretron 0-500 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $164.00

  View options

• 

  View options

  Maretron Maretron 0-10 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $164.00

  View options

• 

  Quantity Add to cart

  Maretron Maretron Starter 1 Kit NMEA200 NMEA 2000 Starter Kit

  Maretron Micro Cable Starter Kit1Model: CABLESTARTER1What's in the Box: Micro Powertap Micro Male terminators x 2 Micro Tee Micro 2m Cable Micro 6m Cable

  Read more less

  $161.00

  Quantity Add to cart

• 

  Quantity Add to cart

  Maretron Maretron 0-3 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $160.00

  Quantity Add to cart

• Sale -$10.01

  View options

  Maretron Maretron Current Transducer w/Cable f/DCM100 - 400 Amp [LEMHTA400-S]

  Current Transducer w/ cable - 400 amp - f/DCM100 WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

  Read more less

  $168.00 $157.99

  View options

• 

  View options

  Maretron Maretron 0-100 PSI Transducer

  Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge PT-0-10PSI-01 0 to 10 PSI (0.69 bar) ± 2% Full Scale Gauge PT-0-50PSI-01 0 to 50 PSI (3.45 bar) ± 1% Full Scale Gauge PT-0-100PSI-01 0 to 100 PSI (6.89 bar) ± 0.5% Full Scale Gauge PT-0-500PSI-01 0 to 500 PSI (34.47 bar) ± 0.5% Full Scale Absolute PT-0-3000PSI-01 0 to 3000 PSI (206.84 bar) ± 0.5% Full Scale Absolute Specification Value Operating Temperature -40°C to 105°C Storage Temperature -40°C to 105°C Proof Pressure 2.4 Full Scale Burst Pressure 2.4 Full Scale Reverse Voltage Protection ± 16V over 5 Minutes Construction 304L stainless steel Pressure/Temperature Cycles 0 to FS @ 8Hz; and ?40°C to 105°C for > 1.8x106 cycles Thermal Shock 105°C to ?40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles Vibration 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours EMC Compatibility 10 Volts/meter per EN 61000-4-3 Humidity 85°C and 90% to 95% R. H. for 250 hours Weight 85g

  Read more less

  $153.00

  View options

• Sale -$9.01

  Quantity Add to cart

  Maretron Maretron NMEA 2000 Starter Kit 1 [CABLE-STARTER-1]

  NMEA 2000 Starter Kit 1Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network.   Contacts are gold-plated brass and couplings are nickel-plated brass for durability and reliability.Included in the Box: (1) 5-Meter Micro Powertap Cable (CF-SPWR05-CF) (1) 10-Meter Micro Trunk/Backbone Cable (CM-CG1-CF-10.0) (1) Micro Tees (CM-CF-CF) (1) 2-Meter Micro Drop Cables (CM-CG1-CF-02.0) (2) Micro Male Terminators (TR-CM) *Sold as a Kit

  Read more less

  $161.00 $151.99

  Quantity Add to cart

• Sale -$9.01

  Quantity Add to cart

  Maretron Maretron Pressure Transducer 0 to 3 PSI [PT-0-3PSI-01]

  Pressure Transducer 0 to 3 PSI - for the FPM100 Fluid Pressure MonitorWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

  Read more less

  $160.00 $150.99

  Quantity Add to cart

• Sale -$9.21

  View options

  Maretron Maretron Micro Double-Ended Cordset - 1M - *Case of 6* [CM-CG1-CF-01.0CASE]

  Micro Double-Ended Cordset - 1M - *Case of 6*Mechanical Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59"Electrical Current Rating: 4.0 Amps Voltage Rating: 250 VCable Outer Jacket Mat/Color: PVC/Gray Conductor Insulation Material: HDPE (data pair), SRPVC (power pair) Number of Conductors: 4X22 AWG, 22 AWG Drain Wire Shielding (3-Levels): FOIL (Overall), FOIL (Power Pair), FOIL (Data Pair) Environmental Protection Class: IEC IP68, NEMA 1,3,4,6P Temperature Rating: -40 deg C to 80 deg C to (-40 deg F to 176 deg F)Approvals (Cable) UL: PLTC 75 deg C Sunlight Resistant E90625,AWM 80 deg C 300V (Cable) CSA: CMX-OUTDOOR-CMG LL54185 75 deg C,AWM I/II A/B 80C 300V FT4 NMEA: NMEA 2000 Approved Specifications: Cable Length (Feet): 3' Box Dimensions: 1"H x 4"W x 5"L WT: 1.2 lbs

  Read more less

  $157.20 $147.99

  View options

• Sale -$9.01

  Quantity Add to cart

  Maretron Maretron Exhaust Gas Temp Probe [TP-EGT-1]

  Exhuast Gas Temperature Probe (0°C to 900°C or 32° to 1652°F)WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

  Read more less

  $157.00 $147.99

  Quantity Add to cart

• Sale -$9.01

  View options

  Maretron MaretronMicro Double-Ended Cordset - 0.5M - *Case of 6* [CM-CG1-CF-00.5CASE]

  Micro Double-Ended Cordset - 0.5M - *Case of 6*Mechanical Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59" Electrical Current Rating: 4.0 Amps Voltage Rating: 250 V Cable Outer Jacket Mat/Color: PVC/Gray Conductor Insulation Material: HDPE (data pair), SRPVC (power pair) Number of Conductors: 4X22 AWG, 22 AWG Drain Wire Shielding (3-Levels): FOIL (Overall), FOIL (Power Pair), FOIL (Data Pair) Environmental Protection Class: IEC IP68, NEMA 1,3,4,6P Temperature Rating: -40° C to 80° C to (-40° F to 176° F)Approvals (Cable) UL: PLTC 75° C Sunlight Resistant E90625, AWM 80° C 300V (Cable) CSA: CMX-OUTDOOR-CMG LL54185 75° C, AWM I/II A/B 80C 300V FT4 NMEA: NMEA 2000 Approved Specifications: Cable Length (Feet): 2' Box Dimensions: 1"H x 5"W x 5"L WT: 0.6 lbs

  Read more less

  $150.00 $140.99

  View options

• Sale -$8.51

  View options

  Maretron Maretron NMEA 2000 Starter Kit [MN2KKIT]

  Maretron NMEA 2000 Starter KitBuilding a New NMEA 2000 Network onboard? Save when buying this Maretron NMEA 2000 Starter Kit. Everything you need for a basic NMEA 2000 Bus/Network or to start a complex one. Please see the ACCESSORIES tab above if additional equipment is neededThe Kit Includes: One Micro/Mid Powertap Tee CF-SPWR05-CF Two Micro Tee CM-CF-CF Two Micro Terminators TR-CM One 3 meter Cordset CM-CG1-CF-03.0 Specifications: Data Interface: NMEA 2000 Box Dimensions: 1"H x 1"W x 1"L WT: 1.05 lbs

  Read more less

  $145.50 $136.99

  View options

• Sale -$7.81

  Quantity Add to cart

  Maretron Maretron Micro Tee - Male (Left), Female (Bottom) Female (Right) - *Case of 6* [CM-CF-CFCASE]

  Micro Tee - Male (Left), Female (Bottom) & Female (Right) - *Case of 6*Male (left)Female (right)Female (Bottom)A Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the network of the same connector style. Gold contacts for greatest reliability Keyed connectors for error-free connections

  Read more less

  $136.80 $128.99

  Quantity Add to cart

• Sale -$7.41

  View options

  Maretron Maretron Mid Bulk Cable - 20M Continuous [DB1-20]

  Mid Bulk Cable - 20M ContinuousMid bulk cable is primarily used as drop cable, but it can also be used at the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility as cables can be made on the job to exact lengths. Features: Meets and exceeds NMEA 2000® specifications for the highest reliability Used with field-attachable connectors to build exact length cables at the job site Optimized for voltage drop sensitive networks (long runs) because power pair wires have half the resistance of Micro cable

  Read more less

  $129.40 $121.99

  View options

---

Show more products