Stud Catch Length: 2-1/4" Width: 7/16" Fastener: #8(4) Material: Brass Quick Guide (pdf)

Read more less

Slam LatchIncludes Striker PlateStainless SteelFlange:2-3/8"Depth:1-1/2"Fastener: Provided

Read more less

Compression Handle Replacement KeyMolded Key for Hexagonal Lock Fits: 6136, 6236, 6738, S-0251, S-0336, S-0436, S-0536.

Read more less

Swivel Eye Hasp - 3" - Chrome PlatedZincFeatures: Chrome Plated Zinc Alloy Padlock eye swivels to act as a latch Specs: Closed Length: 3" Width: 1" Padlock Clearance: 11/32" Screw Size: 6

Read more less

Push Button Rim Latch - Square - Stainless Steel/Plastic HousingPush Button Rim Latch housings feature a streamlined, positive-action closure, ensuring cabinets and drawers stay closed until the button is deliberately pushed. Suitable for left-side or right-side use. Mortise mount for a sleek, finished appearance. Constructed of sturdy plastic with a corrosion resistant 304 stainless steel knob. Latch installs with two #6 RH fasteners, strike plates require two #4 FH fasteners (fasteners not included). Display version comes with both flat and 90° strike plates for inset or overlay mounting. When ordering bulk, please order strike plates (224320 flat, or 224321 90°) separately. Hole spacing on flat strike plate (224320) is 1-7/8". Hole spacing on 90° strike plate (224321) is 1-3/16". For OEM applications, varying combinations of rosettes/buttons are available.Specifications: Finish: Stainless Fastener: #6 RH

Read more less

Locking Push Button LatchFeatures: Cut-Out: 1” Use for door/hatch where want to use forefinger and thumb to open Locking Great for glove boxes, electronic boxes, plexiglass doors

Read more less

Flush Hatch PullThe new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments, and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.

Read more less

Concealed Soft Draw Latch with Keeper - Black RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical

Read more less

Cam BarThis cam bar is a spare part of Perko’s Flush Hatch Dog with a rectangular flange.  More specifically, it’s the cam bar for size #2. Quick Guide (pdf)

Read more less

Non-Locking Nylon T-Handle - White/WhiteWhitecap's Non-Locking White Nylon T-Handle.Specifications: Overall Dimensions: 3" Cut-Out - 2-1/2" Surface depth - 1/8" - 3/4" Fastener Included

Read more less

Grabber Catch Latch - Side Mount - Black - Pull-Up Force 22N (5lbf)Features: Spring-loaded over-center latching One assembly includes catch and keeper Material and Finish: PC/ABS, black Performance Details: Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF) Flammability rating: UL94-HB Installation Notes: Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching. Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)

Read more less

Latch-tite™ Lifting Handle - 2-1/2" Round - Stainless SteelStainless Steel Type 316Deluxe PolishedLatch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Round design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.The Latch-tite™series is for applications that require a heavy-duty, high performance construction and high quality appearance.Features: Cast stainless steel Deluxe polish finish Unique patented stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration Over center anti-rattle handles provide quiet operation Concealed fasteners Mold plugs available upon request for boat builders Specifications: Dimensions: 2-1/2" Diameter Edge Thickness: 5/32" Adjust Depth: 1-3/4" Hole Size: 2-1/16" Overall Depth: 2-5/8" Screw: #8 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Flush Pull Ring Size: 3" x 2" Fastener:#8(4) Material:Chrome Plated Brass WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T-Handle Latch - Nylon Black/Black - Non-LockingFeatures: Threaded offset cam bar with set screw included Neoprene O-Ring Shaft is 1-3/8" long unless otherwise noted Specifications: Outer Diameter: 3" Cut-Out: 2-1/2" Surface Depth: 1/8" - 3/4" Fastener: Included

Read more less

Barrel Bolt Chrome Plated Bronze Body and Keeper 3/8" Diameter Bolt Bulkhead Keeper Easily Installs in a 5/8" Hole Includes Friction Pad to Eliminate Rattle and Provide Smooth Operation

Read more less

Cabin Door HookLength: 2"Fastener: #6(4)Material: Polished Brass*Hooks pre-drilled for #6 screwsWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Compression Lever Latch - Flush - LockingFeatures: Material: Zinc Alloy Finish: Powder Coat Color/Appearance: Black Access Restriction: Key Locking Sealed: No Gasketed: No Grip Range: 1.000-24.000mm (0.04-0.94") Door Thickness Range: 5.000mm (0.20") Head Style: Raised Trigger Profile: Flush Operation: Hand Operated

Read more less

Entry Door Lock SecureSpecifications: Color/Appearance: White Pawl Style: Short Access Restriction: Key Locking Sealed: No Grip Range: 12.700mm (0.50") Operation: Right Swing Flush Handle: No

Read more less

Ball Catch Adjustable - 316 Stainless SteelFeatures: Material: 316 Stainless Steel Adjustable: Yes Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Chrome Plated Zinc Cabin Door Hook - 2"Features:Chrome Plated Zinc Alloy

Read more less

Surface Mount Locking Ring Pull - Stamped 304 Stainless Steel/Die Cast Zinc LockThis Surface Mount Locking Ring Pull is recessed for a flush, clean installation. Includes two locking arms for flush or offset installations. Ideal for hatches, deck plates, cabinets, and drawers. Designed to keep your valuables protected, it includes two matching keys. Keys are random, so requesting multiple ring pulls keyed alike is not possible. Constructed of corrosion-resistant stamped 304 stainless steel with a die-cast zinc lock. Installs with a back-mounted threaded nut.

Read more less

Latch-tite™ Lifting Handle - 3" Round - Stainless SteelStainless Steel Type 316Deluxe PolishedLatch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Round design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.The Latch-tite™series is for applications that require a heavy-duty, high performance construction and high quality appearance.Features: Cast stainless steel Deluxe polish finish Unique patented stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration Over center anti-rattle handles provide quiet operation Concealed fasteners Mold plugs available upon request for boat builders Specifications: Dimensions: 3" Diameter Edge Thickness: 3/32" Adjust Depth: 2-7/8" Hole Size: 2-9/16" Overall Depth: 3-13/16" Screw: #8 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Chrome Plated Zinc Cabin Door Hook - 3"Features:Chrome Plated Zinc Alloy

Read more less

Offshore Swing Door Latch Key LockingSpecifications: Material: Aluminum Alloy Pawl Style: Short Access Restriction: Key Locking Sealed: No Gasketed: Yes Grip Range: 12.500 - 15.000mm (0.49-0.59") Operation: Right Hand Out Flush Handle: No

Read more less

Door Catches - Black Nylon - PairSpecs: Black Polymer Stud Dimensions: 1-1/8" x 3/8" Catch Dimensions: 1-3/8" x 7/8" Mounting Screw Size: 4 R.H.

Read more less

Cupboard Bolt Surface mounted to the front of a cupboard door, these Cupboard Bolts are used to secure cabinet doors while underway. Corrosion resistant chrome plated extruded brass construction. Installs easily with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Anti-Rattle Hold DownLength: 3-15/16"Width: 1-13/16"Lock Hole:1/4"Fastener: #10(4)Material: Polished Brass

Read more less

Barrel Bolt - Chrome Finish - 1-1/2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Pull Ring Size:1-1/2" x 1-3/4" Fastener:#6(4) Material:Chrome Plated Brass WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Anti-Rattle Hold DownLength: 3-15/16"Width: 1-13/16"Lock Hole:1/4"Fastener: #10(4)Material: Chrome Plated Brass

Read more less

Flush Pull Ring Size:1-1/2" x 1-7/8" Fastener:#8(4) Material:316 Stainless Steel

Read more less

Chrome Plated Zinc Cabin Door Hook - 1-3/4"Features:Chrome Plated Zinc Alloy

Read more less

Fixed Keeper for Pull to Open Latches - Stainless SteelFeatures:Material: Stainless SteelSouthco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

One-Piece Flexible Handle Latch Rubber/Stainless Steel MountFeatures: Material: Rubber Material: Stainless Steel Finish: Natural Access Restriction: No Restriction Mounting Style: Front Mount Keeper Style: R Operation: Pull Series: 100 Series Latch Assembled: Yes Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Offset Long Cam BarFeatures: Zinc Replacement Cam Bar - Offset (Long) Length - 2-7/8" Shaft - 3/8" (metric threads)

Read more less

Push Button Cabinet Latch - RectangularThese corrosion resistant 316 stainless steel Cabinet Latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy to install by boring a single 3/4” hole. Suitable for left or right-hand side uses. Sleek, low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Keys for Compression LatchesSpecifications: Material: Steel Finish: Nickel Plated Series: Standard Type: Accessory Size: 13.5mm Quick Guide (pdf)

Read more less

Pop-Out Knob Latch w/Fixed Grip Threaded Body - Black PlasticFeatures: Material: Plastic Material Grade: ABS Finish: Natural Color/Appearance: Black Access Restriction: No Restriction Grip Type: Fixed Installation: Threaded body and nut Panel Thickness: 1.200-19.000mm (0.05-0.75") Profile: Low Profile

Read more less

T-Handle Locking Compression Latch Investment cast 316 stainless steel construction for corrosion resistance and durability. This latch features a T-handle to engage the offset locking arm. Handle is recessed for a flush, clean installation. Locking feature for secure hatches. Includes heavy duty stainless key. Requires a 2” size cutout hole and installs with a back mounted stainless cup.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Door Stop & Catch - Brass - 2" The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with a plain polished or chrome plated finish. These door stops are both decorative and functional. Installs with five #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Flush Pull - Small - BlackFeatures: Size: Small Length: 2-1/4" Width: 2-1/4" Fastener: #10(4) Requires cut-out for installation

Read more less

Twin Roller Door Catch - White Upgrade your cabinet or wardrobe with these Twin Roller Door Catches. Sturdy injection molded nylon construction these catches provide secure door closure. Installs with four #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Surface Mount Drawer Pull - Chrome Plated ZincSpecs: Chrome Plated Zinc Alloy Overall Width: 3-7/16" Inside Width: 2-5/16" Screw Size: 6

Read more less

Offset Short Cam BarFeatures: Zinc Replacement Cam Bar - Offset (Short) Size - 2-1/4" Shaft - 3/8" (metric threads)

Read more less

Latch-tite™ Stainless Steel 2-7/16" SquareLatch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Square design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.  The Latch-tite™ series is for applications that require a heavy-duty, high performance construction and high quality appearance.Features: Cast stainless steel Type 316 Deluxe polish finish Unique stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration Over center anti-rattle handles provide quiet operation Concealed fasteners Mold plugs available upon request for boat builders Adjustable depth Specifications: Dimensions: 2-7/16" x 2-7/16" Edge Thickness: 5/32" Adjust Depth: 1-3/4" Hole Size: 2-1/16" Overall Depth: 2-5/16" Screw: #8 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Barrel Bolt - Chrome Finish - 2-1/2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Chrome Plated Bronze Cabin Door Hook - 3"Features: Cast Bronze Chrome Plated

Read more less

T-Handle Latch with Keeper - Pull Draw Front Mount Black Flexible RubberLarge Size (70 Series) is 221mm (8.70") when latchedThese flexible handle latches adapt well to alignment irregularities in field use. But no matter how they are mounted or latched, their non-corrosive non-conductive UV-resistant thermoplastic elastomer handles provide consistent vibration-absorbing benefits for quiet and secure closure.The flexible, black thermoplastic elastomer handle is enhanced with a variety of additional features and options to provide smooth trouble-free performance under real-world conditions. Built-in drag keeps latch handle stationary when unlatched Curved T-handle style provides sure grip for operating latch Different sizes and mounting styles accommodate a range of panel thicknesses Indented keeper ensures positive latching Provides intuitive ease of operation Completely non-corrosive materials Standards and SpecificationsFlammability Rating: UL94-HBIndustry Applications Automotive, Trucks Construction Equipment, Off-Road Vehicles, Farm Equipment Exhibits/Signs Food Equipment Industrial Machinery, Machine Tools, Metal Cutting Lawn/Garden Equipment Marine

Read more less