Axiom & Element Power Cable w/NMEA 2000 Connector - 1.5MAxiom Power Cable, 1.5M Straight with NMEA 2000 Connector Specifications: Type: Power Cords Box Dimensions: 2"H x 6"W x 7"L WT: 0.4 lbs UPC: 723193817292

Read more less

Mark 15 Sextant#026This model has many great features including seven large sunshades, a 3 mm x 27 mm star scope, and easy-to-read micrometer drum vernier scale that reads to 2/10 of a minute. The Mark 15 has a 7" (18 cm) frame radius graduated from 120° to -5° and comes with a traditional half-silvered mirror.Comes with instruction booklet. Owner's Manual (pdf)

Read more less

CLMD16-J2 Output Mating Connector with 1M LeadsOutput (J2) Mating Connector with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 3 Box Dimensions: 1"H x 6"W x 7"L WT: 0.8 lbs UPC: 873804004303

Read more less

20m Cable for HALO Dome Radar/NemesisThis 20m (65.6 ft.) cable is for the Simrad HALO Dome Radar/Nemesis. Specifications: Type: Cables Box Dimensions: 3"H x 9"W x 9"L WT: 4.4 lbs UPC: 9420024173916

Read more less

5M Extension Cable for HALO Dome Radar5-meter cable for HALO Dome Radar. Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 6"L WT: 1.1 lbs UPC: 9420064114061

Read more less

Sun Cover for HOOK2 7" SeriesKeep your HOOK2 safe from dirt and debris with a Lowrance Sun Cover Specifications: Type: Covers Box Dimensions: 2"H x 7"W x 12"L WT: 0.47 lbs UPC: 9420024168202

Read more less

Cable Pull-Thru Service ToolThe Cable Pull-Thru Service Tool is designed to simplify the installation of Navico Group products primarily for Lowrance, Simrad, and B & G products. Built to connect to common fish-stick/fish-tape cable pullers, the service tool includes three fittings making it easier to pull select cable types, including Navico Group xSonic transducer, 9-Pin Power, and HALO® 2000/3000 Power cables. Features: Minimize potential damage to cable ends Reduce snags for faster installation Supplied with 8-32 and 10-24 male/female threaded ends Includes:  Three fittings for easy connection to Yellow 5-pin Ethernet NMEA 2000® and Navico Group xSonic Transducer 9-Pin Power HALO 2000/3000 Power cables Specifications: Type: Tools Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9420064135707

Read more less

Submersible Pressure Transducer - 0-1.5 PSIThe submersible pressure transducers are used together with Maretron's Fluid Pressure Monitor (FPM100), which allows tank fluid level to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000® display. When used together with Maretron displays, alerts can be set to inform the user of low or high tank levels. Users can be notified through emails or text messages about their tank levels when not onboard the vessel. Additionally, the tank levels can be stored using Maretron's data recorder (VDR100) for later analysis.

Read more less

Suncover for NSS7 evo3Make sure your NSS7 evo3 continues to work like new by protecting it with the Simrad 7" Suncover. This sturdily made cover fits your system perfectly. It protects your unit from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 10"L WT: 0.4 lbs UPC: 9420024160862

Read more less

1.5" NPT Non-Displace Hull Focus TubeThe Maretron TFT-1.5NPT is a 1.5in NPT Non-Displacement Hull Focus Tube.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Extension Cable for 12-Pin Garmin Scanning TransducersExtend the cable length of your compatible 12-pin transducer with these 4.3 ft, 10 ft, or 30 ft cables. Supports 12-pin Airmar transducers with XID. Specifications: Type: Extension Box Dimensions: 2"H x 4"W x 11"L WT: 0.4 lbs UPC: 753759342227

Read more less

Waterproof USB Cable - 5M (16')USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your laptop. Because it locks into place it won't fall out due to vibration or shock.Features: 1 x Waterproof mini connector (IPx7 rated) 1 x Standard USB-A PC connector 5M (16') in length

Read more less

GPS021S DGPS AntennaFuruno's GPS/DGPS H-Field Antenna WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Antennas Box Dimensions: 7"H x 8"W x 11"L WT: 2.32 lbs UPC: 611679361257

Read more less

Stacking Mount for Garmin BlueNet™ NetworkUse this stacking mount to save space and enhance access to both the Garmin BlueNet™ 20 switch and Garmin BlueNet™ 30 gateway. 

Read more less

Field Installable ConnectorsUse our waterproof male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on our gWindT family of transducers when stepping the mast.Compatible Devices: GND™ 10 Black Box Bridge gWind™ Race Transducer gWind™ Transducer gWind™ Wireless Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

GND™ 10 Black Box BridgeThe Garmin GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus network and NMEA 2000 to provide trouble-free compatibility between Nexus and Garmin products including gWind and gWind Race wind transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity eliminates need for user setup and system configuration.GND 10 allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks. It also enables GND 10 software updates over NMEA 2000. Existing NexusRace PC application can be used to update software, configure and calibrate Nexus devices over USB using the FDX protocol.Features: Converts data between the Nexus network and NMEA 2000 Provides trouble-free compatibility between Nexus and Garmin products Simple plug-and-play installation between Nexus, NMEA 2000 and USB No user setup or system configuration required Allows PC applications such as NexusRace, Expedition, Adrena, or SeaTrack, to communicate sailing specific functions between Nexus and NMEA 2000 networks Enables GND 10 software updates over NMEA 2000 Existing NexusRace PC application can be used to update software, configure, and calibrate Nexus devices over USB using the FDX protocol Lighting levels of Nexus Marine instruments can be set from equipment connected to NMEA 2000 Allow setting and resetting of race start timers and distance logs from Garmin equipment connected to the NMEA 2000 network In The Box GND 10 USB Mini-B cable NMEA 2000® drop cable (2 m) NMEA 2000 T-connector Nexus network cable (5 m; straight connector) Mounting hardware Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sidekick™ Thermal Tip-UpThe Vexilar Thermal Tip-Up is designed to work in conjunction with the exclusive Sidekick™ WiFi Sonar Transducer. Simply snap the Sidekick module into the designated slot on the tip-up, and you’re ready to fish. For the first time, you can monitor your tip-ups from a distance of up to 300ft with real-time sonar feedback via the Vexilar app or the Vision X10 head unit. The magnet on the tip-up flag also allows you to receive flag alerts when a bite triggers the flag. Never be left wondering if your bait is still on, if there has been any action near your tip-up, or if your flag is up.The thermal tip-up is insulated to keep your hole from freezing over, but requires the Sidekick integration to keep the hole fully protected from the elements. The red flag and black base are both highly visible from long distances. The tip-up is constructed from injection-molded ABS material, making it extremely durable and lightweight. Use the magnet on the spool to keep your hook from coming loose during transport and store your Sidekick cable or additional tackle in the storage compartment. The Vexilar Thermal Tip will literally change the way you view tip-up fishing!Features: Insulated Tip-up Exclusive Sidekick compatibility Storage compartment Hook keeper magnet Durable and lightweight ABS material

Read more less

Sidekick™ Mounting PlateThe Sidekick™ Mounting Plate is designed to work in conjunction with the exclusive Sidekick WiFi Sonar Transducer. The mounting plate can be mounted to the wall, floor, or countertop of your wheel house, making accessibility quick and easy. Built-in teeth help to manage your transducer cord when mounted vertically, and the cut-out allows your transducer cord to pass through the plate when mounted horizontally. Just snap the Sidekick module into the designated slot on the mounting plate, drop your transducer in the hole, and start fishing.Features: Mounting plate Exclusive Sidekick compatibility Cable management teeth Cable pass-through Durable and lightweight ABS material

Read more less

Sidekick™ Ice BaseThe Sidekick™ Ice Base is designed to work in conjunction with the exclusive Sidekick WiFi Sonar Transducer. Just snap the Sidekick module into the designated slot on the Ice Base, drop your transducer in the hole, and start fishing. Take the Ice Base wherever you go to actively fish with the base placed around your hole or use it to monitor set lines and rattle reels.Features: Ice Base Exclusive Sidekick compatibility Durable and lightweight ABS material

Read more less

Course Computer Unit (CCU) - Reactor™ 40 Steer-by-wireGarmin's CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to your boat's steering system and the NMEA 2000® network to communicate with your GHC™ 20 and optional NMEA 2000-compatible devices.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

APK™ 10 Autopilot Keyboard - VerticalGAIN PRECISE CONTROL OF YOUR AUTOPILOTGet easy-to-use control of your Reactor™ 40 autopilot, and put simple, intuitive knob and button activation, heading changes, and more at your fingertips.Rotary KnobThe LED-encircled knob provides precise heading control and colored reference of autopilot status.Autopilot ButtonsDedicated engage and standby buttons make starting and stopping your autopilot easy.Multipurpose ButtonsAdd more autopilot control functions based on your vessel type and setup preferences.Simple InstallationConnect to your NMEA® 2000 network with a single port and cable for integration and power.Compact DesignA low-profile design matches the height of your GHC 50 instrument and GPSMAP® chartplotter. The APK 10 keypad accessory comes in horizontal and vertical mounting options to suit your new or existing helm.In The Box: APK 10 autopilot keypad (vertical) Backbone/drop cable (2 m) and T-connector for the NMEA 2000® Network Mounting hardware (flush and surface) Documentation Specifications: Dimensions (WxHxD): Flush mount: 1.6” x 6.2” x 0.28” (40.1 x 157.0 x 7.0 mm)Surface mount: 1.6” x 6.2” x 0.65” (41.1 x 158.0 x 16.4 mm) Weight: Vertical: 3.5 oz (100 g) Temperature range: From 5° to 158°F (from -15° to 70°C) Material: Fully-gasketed, high-impact plastic Water rating: IPX7 Compass-safe distance: 4.5” (114 mm) Powered input: Powered supplied from the NMEA 2000® network

Read more less

Power Cable for GPSMAP® 7x2, 9x2, 10x2 & 12x2 SeriesPower and connect your compatible GPSMAP device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 5"L WT: 0.35 lbs UPC: 753759172664

Read more less

DRS Signal/Power Cable - 15MFuruno's DRS Signal/Power Cable, 15 Meter. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Power Cable - 10M with Bare Wires for QuantumQuantum 10M power cable with Bare wires. Specifications: Type: Power Cords Box Dimensions: 2"H x 10"W x 12"L WT: 2.2 lbs UPC: 723193793404

Read more less

C12x/e12x to Axiom Adapter Plate to Existing Fixing HolesPowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12″ multifunction displays in place of a C12x/e12x Series Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 16"L WT: 0.4 lbs

Read more less

20M RayNet to RayNet Cable for e & c Series

Read more less

RMK-10 System Remote Control Portrait KeypadRemote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location.The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displaysThe RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere.Utilising Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.Mounting OptionsThe RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.Specifications: PoE classClass 1 Nominal supply voltage12 / 24 V dc Operating voltage range10.8V dc to 31.2V dc Power consumption3.84W Environmental: Operating temperature-25ºC to +55ºC (-13ºF to 131ºF) Storage temperature-30ºC to +70ºC (-22ºF to 158ºF) Relative humidityMaximum 75% Waterproof ratingIPX6 Wired Connections: Network / power1 x RayNet connector | (gS Series - 1000 Mb/s plus PoE) | (aSeries , cSeries, eSeries - 100 Mb/s) Alternate power1 x power connector

Read more less

Right-Angle Single Keyway Power Cable - 10MFLIR's 10M M232 Right Angle Single Keyway Power Cable. Specifications: Type: Power Cords Box Dimensions: 2"H x 10"W x 10"L WT: 1.15 lbs UPC: 723193818145

Read more less

Ethernet Cable - 1.8M - M12 to M12 for NEP-3The Navico Ethernet Extension cable measures 1.8M and is designed for M12 to M12 connections for the NEP-3. Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 8"L WT: 0.4 lbs UPC: 9420064130634

Read more less

Simrad adapter cable, Ethernet Yellow 5 pin male to RJ45 female 2 m (6.5 ft)*needed when hooking up a WM-2 to a NSE series Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 5"L WT: 0.5 lbs UPC: 042194533872

Read more less

Black Suncover for i50, i60, i70, i70s, p70 & p70s (eS/AXIOM style)Sun covers for your electronics serve a very important purpose. When the equipment is not in use, they prevent UV damage to the screen and face of the unit. They also reduce the likelihood of screen damage and other surface damage. They are also the first defense line if something drops on the screen.Features: Black Raymarine instrument sun cover Protects instruments with square eS-style bezels Applications: Raymarine i50, i60, i70, i70s, p70 and p70s (eS / AXIOM style) *Note: For instruments using the a/c/e style rounded bezels, use A80357

Read more less

veKonvert NMEA 2000 GatewayveKonvert brings NMEA 2000 connectivity to Victron’s popular SmartShunt battery monitoring system. Now a navigation multi-function display becomes a sophisticated battery and energy management system.FeaturesveKonvert is a stand-alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors, and MPPT Solar Charge Controller range into NMEA 2000 systems.This functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower-cost, simpler solution for smaller installations that just need the electrical data displayed on a multi-function display.Boaters and boat builders like a clear and uncluttered dash or nav area, so integrating electrical data into the main navigation display is a popular and cost-saving option.The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.Victron solar charge controllers (MPPTs) and battery monitors can now also interconnect to your NMEA 2000 MFD via the veKonvert interface.InstallationInstallation is simple – just "T" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt, and you've got battery and electrical data on your NMEA 2000 network!  Note that one veKonvert is required for each battery bank.Specifications: Universal NMEA 2000 gateway for Victron products with a VE.Direct interface Enables battery management or solar charge monitoring on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc) Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm Easy installation, plug ‘n’ play connectivity, and self-powering from the NMEA 2000 bus Generates NMEA 2000 alerts from any BMV or SmartShunt Alarms Supports multiple SmartShunts for a larger multi-battery system VeKonvert Is Compatible with the Following Victron Products:BMV-700, BMV-702, BMV-700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge ControllersThe veKonvert will automatically detect what Victron device it is connected to and adjust the NMEA 2000 data that it outputs accordingly. Below is a list of the PGNs that the veKonvert outputs for the different Victron Devices and different modes that they can operate in:  All MPPTs PGN 127506 DC Detailed Status (DC Type set to MPPT) PGN 127508 Battery Status (MPPT Output Voltage and Current) PGN 130900 Proprietary Solar Controller (All solar panel data) All SmartShunts and BMVs PGN 127506 DC Detailed Status (DC Type set to Battery, SOC and A/h consumed) PGN 127508 Battery Status (Output Voltage and Current) NOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.

Read more less

EV-2 Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.Features & Benefits: Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options - Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays EV-2 has been designed for the latest drive-by-wire steering systems and connects directly to Raymarine's SeaTalkng bus. EV-2 also has a dedicated CAN Bus port for direct connection to steer-by-wire steering systems - such as ZF Pod Drives, Yamaha Helm Master, Volvo IPS and SeaStar Solutions Optimus systems. A single CAN Bus connection to the EV-2 eliminates the need for an Autopilot Control Unit (ACU) further simplifying installation.

Read more less

Flush Mount Bezel001-156-750The 001-156-750 is a flush mount bezel for the GP33 and RD33 display unit. This bezel should be used when the display is flush mounted in a space previously occupied by a GP30/RD30 style display.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 8"W x 9"L WT: 1.1 lbs UPC: 611679341501

Read more less

CLMD16-J3 I/O Mating Connector KitJ3 (I/O Gen Purpose) Harness Kit with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Ethernet Cable - 5M - M12 to M12 for NEP-3The Navico Ethernet Extension cable measures 5M and is designed for M12 to M12 connections for the NEP-3. Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 8"L WT: 0.6 lbs UPC: 9420064130641

Read more less

16" Protective Cover - MagneticKeep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this magnetic protective cover. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 2"H x 10"W x 15"L WT: 1.2 lbs UPC: 753759219161

Read more less

Electronic Control Unit (ECU)Garmin's Electronics Control Unit (ECU) is made specifically for the GHP™ 12 Autopilot System.Compatible Devices: GHP™ 12 Autopilot System GHP Reactor™ Mechanical/Retrofit/Solenoid Corepack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

OTG Adapter Cable for GPSMAP® 8400/8600Charge USB devices from your GPSMAP® 8400 or 8600 series chartplotter with this 6-foot adapter cable. The waterproof and secure connection allows you to power an external device via USB, such as a phone or media player, from your Garmin chartplotter. You can also power your Chromecast or Roku - with a coupler and HDMI cable (sold separately) - and then stream video wirelessly to your chartplotter.Compatible Devices: GPSMAP® 8400 GPSMAP® 8600 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

High-Speed HDMI CableUse this 15-foot cable to connect your compatible Garmin marine product to an HDMI device. The water-resistant and secure connection supports 4K video and audio playback. Refer to your device owner’s manual for more information on supported A/V features.

Read more less

Mark 3 Marine SextantSometimes referred to as a "lifeboat" sextant, the Mark 3 is an inexpensive training sextant. Yet this model has taken sailors around the world, too! It is full-sized and has sunshades, but no optical magnification to help you find dim celestial bodies.Comes with instruction booklet. Owner's Manual (pdf)

Read more less

Artificial HorizonAnswers the need of every sextant user who cannot depend on a natural sea horizon. Use for backyard practice, finding exact positon when inland, and making exact sextant shot on foggy mornings. To use, fill with water and read the angle of the reflected sun with your sextant. Half your sextant reading is the sun's angle above the true horizon. Windproof and corrosion resistant, the reflecting surface is completely enclosed.Comes with two sun shades, a lid and full directions. Compact 6" x 4" x 1-1/2" (15 x 10 x 4 cm). Owner's Manual (pdf)

Read more less

Replacement Battery for WS320Features: High Performance No Compromise Wireless Easy installation

Read more less

Fuel Flow Sensor with 10' cable & T-connectorFuel Flow Sensor Gasoline ONLY. 1 required per engine. Up to 3 engines supported. Outputs: Fuel Flow Tank Fuel Used Trip Fuel Used Seasonal Fuel Used Cable Length: 10'Fuel Line Diameter: 3/8" (9.5mm) Inside DiameterFlow Rate Measured: Optimized for 0.6-45 Gal/hr but can measure outside these valuesAdded Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hrInstallation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the linePackage: The Fuel Flow Sensor, N2K T and 2 (two) 1" hose clampsFuel Type: Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systemsHole required to route through a bulkhead: 22mm (7/8")Multiple Fule Flow sensors possible: Yes Specifications: Type: Misc Box Dimensions: 2"H x 4"W x 10"L WT: 0.6 lbs UPC: 9420024129852

Read more less

5M Cable for HALO Dome Radar/Nemesis™5M cable for HALO Dome Radar. Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 8"L WT: 1.2 lbs UPC: 9420024173893

Read more less

Sun Cover for HOOK2 4" SeriesKeep your HOOK2 safe from dirt and debris with a Lowrance Sun Cover Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs UPC: 9420024168189

Read more less

iKreate NMEA 2000 Simulator with USBFor anyone involved in designing, manufacturing, or installing marine electronics, the ability to simulate or replay NMEA2000 data is a real advantage and can accelerate software development, demonstrate NMEA2000 devices, or help diagnose network issues.With more and more modern boats having an NMEA2000 network at the heart of their navigation system, it is really important that you have the tools to investigate the devices and data on the network should things not work as planned.Consisting of an iKreate USB interface and an HTML5-based web app, the iKreate simulator can generate any number of NMEA2000 PGNs or replay saved log files of real-life network data from any NMEA2000 system, regardless of brand.This package includes iKreate to connect to the NMEA 2000 network and the simulator software to generate any number of NMEA2000 PGNs.Just like our NMEA2000 Display App, the iKreate Simulator takes a new approach and is the World’s first multi-platform, browser-based NMEA2000 Simulator App that will run on Windows, LINUX, Mac OS X, and Raspbian. There is no installation, and if you can save a file and find it again, then that is as complex as it gets with just a single HTML5 file to worry about (less than 0.5MB in size).You need to use the app with a browser that supports the Web Serial API, which currently includes Chrome, Chromium, MS Edge, and Opera. We also plan to support Firefox going forward (with its WebSerial Extension), but this was not possible for the first release of the app.Features: Create individual NMEA 2000 PGNs from a drop-down list populated with the data you enter, or play back a NMEA 2000 log file captured by a Digital Yacht NMEA 2000 product, etc, from an on-board system Multiple PGN groups can be created and even saved for future use The data variance function can synthesise changing values No complicated software to install – just a simple file for Chrome, Edge, Opera or Chromium Functions on PC, MAC, and Linux platforms – simple USB connection Set SRC address and instance Integrated 0.8m NMEA 2000 and 0.8m USB cable Available with USB-C connector (USB-A option) What's In The Box? iKreate USB Interface Software to download via link Owner's Manual (pdf)

Read more less

173 2-1/4" Ball Mount for Fishfinder & ChartplotterFeatures: The Scotty 2.25″ Ball Mount enables anglers to mount larger fish finders on their watercraft It’s designed for 10″-12″ fish finders and offers sturdy and secure holding power Prefabricated holes on the top plate allow easy installation gimbal mount brackets that come with anglers’ fish finders Produced using corrosion proof reinforced nylon Brochure (pdf)

Read more less