Fuel Flow Sensor with 10' cable & T-connectorFuel Flow Sensor Gasoline ONLY. 1 required per engine. Up to 3 engines supported. Outputs: Fuel Flow Tank Fuel Used Trip Fuel Used Seasonal Fuel Used Cable Length: 10'Fuel Line Diameter: 3/8" (9.5mm) Inside DiameterFlow Rate Measured: Optimized for 0.6-45 Gal/hr but can measure outside these valuesAdded Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hrInstallation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the linePackage: The Fuel Flow Sensor, N2K T and 2 (two) 1" hose clampsFuel Type: Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systemsHole required to route through a bulkhead: 22mm (7/8")Multiple Fule Flow sensors possible: Yes Specifications: Type: Misc Box Dimensions: 2"H x 4"W x 10"L WT: 0.6 lbs UPC: 9420024129852

Read more less

20M RayNet to RayNet Cable for e & c Series

Read more less

TA100 Wind Vane, bearing & stud kit

Read more less

A12X to Axiom 12 Adapter Plate to Existing Fixing HolesPowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12" multifunction displays in place of a A12x Series Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 0.6 lbs UPC: 723193821398

Read more less

ZG100 GPS AntennaThe B & G ZG100 GPS antenna provides precise and dependable position data making it the perfect partner for B & G chartplotters and instrument systems.The highly accurate 10 Hz GPS gives a precise and smooth update of position information during acceleration and maneuvering, rapid signal acquisition, and consistent position accuracy augmented by secondary satellite systems like WAAS, EGNOS, MSAS, and Galileo. It is also QZSS-ready.Features: Highly accurate position 10Hz update rate Sail Specific COG/SOG filtering for optimum performance GPS/Galileo support Augmented with WAAS, EGNOS, and more Integrated heading sensor Heel & Trim sensors Compact, waterproof (IP67) design NMEA 2000® What's in the Box? N2K-T-RD Network T-Connector NMEA 2000 6ft Network Extension Cable Specifications: Waterproof rating: IPX-7 Dimensions: Diameter3.54" (90mm) Weight: 0.30 lbs (0.14 kg) Operating Temperature Range: -13°F to 149°F (-25°C to 65°C) Compass Safe: 21.00" (518mm) Storage Temperature Range: -22°F to 158°F (-30°C to 70°C) Dimensions: W x H x D3.54" (90mm) x 1.50" (38mm) Warranty Period: 5 Years Supply Voltage: 9v-18v NMEA 0183 Sentences supported: no NMEA 2000 Connectivity: Yes

Read more less

GPS 24xd GPS Antenna w/ Heading Sensor - NMEA 2000 EXPLORE COASTAL WATERSThe GPS 24xd position receiver and antenna gives you precise location with multi-band GNSS and heading accuracy even at slow speeds. Navigate in more locations with expanded GNSS support.  Get high-sensitivity tracking with fast GPS update rate.  Accurately pinpoint your heading — regardless of speed. It’s water-resistant (IPX7) to withstand the elements. Install it easily with multiple mounting options.  The antenna is compatible with NMEA 2000® devices. Multi-Band GNSSMulti-band GNSS provides location accuracy to within 1 meter to compatible marine multifunction displays, instrument displays and autopilots.Magnetic HeadingThe magnetic heading sensor provides accuracy to within 3 degrees, stabilizing charts, radar overlay and MARPA even at slow speeds.High-Sensitivity GPSFast 10 Hz position update rates provide high-sensitivity position, velocity and time data.Expanded GNSS SupportGPS 24xd provides access to four key global navigation satellite systems (GPS, Galileo1, GLONASS and BeiDou1) to more accurately track in challenging conditions than GPS alone.Multi-SBAS CompatibleMulti-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of its signals.Mounting OptionsInstallation is easy with under-deck, pole and surface-mount options.In The Box: GPS 24xd NMEA 2000® Pole mount Surface mount Under deck mount NMEA 2000 backbone/drop cable (6 meters) NMEA 2000 T-connector Documentation Specifications: Type: Antennas Box Dimensions: 7"H x 7"W x 7"L WT: 2.15 lbs UPC: 753759248215 Owner's Manual (pdf)

Read more less

LANLink NMEA 2000 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.*This version ships with an iKonvertNMEA Certified gatewayFeatures: NMEA 2000 to ethernet gateway version The NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options) 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection Web user interface for easy setup from the connected device via browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm Owner's Manual (pdf)

Read more less

0.3M Daisy Chain Cable for Alpha DisplaysDaisy chain up to four Alpha Performance Displays together to create the ultimate data display. Daisy chain cables attach seamlessly to the back of each display.Features: 0.3-meter Daisy Chain Cable  Suitable for both 7” and 9” Alpha Displays Specifications: Type: Cables Box Dimensions: 1"H x 7"W x 11"L WT: 0.3 lbs UPC: 723193842775

Read more less

Black Retrofit Bezel for i50, i60, i70, p70 & p70RBlack Bezel for Raymarine's i50, i60, i70, p70 and p70R (Spare). Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 5"L WT: 0.2 lbs UPC: 723193812341

Read more less

25M Digital Radar Cable w/ Raynet Connector f/HD & Super HD Color Radar Scanners Specifications: Type: Cables Box Dimensions: 3"H x 25"W x 25"L WT: 6.25 lbs UPC: 723193770610

Read more less

Suncover for Cruise 7Protective suncover for Cruise 7" displays. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 10"L WT: 0.25 lbs UPC: 9420064105274

Read more less

Power CableRaymarine Power Cable for SeaTalkng Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs UPC: 723193060490

Read more less

10M Digital Radar Cable w/RayNet Connector on one end.

Read more less

RayNet to RJ45 Male Cable - 10MPart #: A80159RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 10M (32.81') RayNet to SeaTalkhs (RJ45) cable

Read more less

Paddle Wheel Kit for Raymarine ST40, 60, 60 PLUS, 365/470/750Kit contains: Paddle wheel Stainless axle  Rubber o-rings

Read more less

Adapter Plate for GPSMAP® 9x2 to 9x3 SeriesThis adapter bezel kit allows you to install a new GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus chartplotter in your dash. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 8"W x 11"L WT: 0.3 lbs UPC: 753759250836

Read more less

Protective Cover for STRIKER™/Vivid 5" UnitsUse our cover to protect your compatible STRIKER™ from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 1"H x 4"W x 8"L WT: 0.4 lbs UPC: 753759275600

Read more less

Protective Cover for ECHOMAP Plus/UHD 7" UnitsUse our cover to protect your compatible ECHOMAP Plus from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 2"H x 4"W x 11"L WT: 0.55 lbs UPC: 753759275563

Read more less

Adapter CableRaymarine Adapter Cable for SeaTalk (1) to SeaTalkng Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 7"L WT: 0.05 lbs UPC: 723193060476

Read more less

Protective Cover for STRIKER™ Plus/Vivid 4" UnitsUse our cover to protect your compatible STRIKER Plus from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 2"H x 4"W x 10"L WT: 0.55 lbs UPC: 753759275594

Read more less

Adaptor Plate for Axiom 9 to C80/E80 Size Cutout *Will Require New HolesThe Axiom 9 adapter plate is used when replacing an existing legacy C80 or E80 Classic Multifunction Display with an Axion 9 or Axion 9 RV requires new fixing holes. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1.05 lbs UPC: 723193824955

Read more less

Power Cable - 10M with Bare Wires for QuantumQuantum 10M power cable with Bare wires. Specifications: Type: Power Cords Box Dimensions: 2"H x 10"W x 12"L WT: 2.2 lbs UPC: 723193793404

Read more less

Suncover for Cruise 9Protective suncover for Cruise 9" displays. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 12"L WT: 0.35 lbs UPC: 9420064105281

Read more less

Suncover for i70s & Retrofitted i50, i60, i70 & p70Raymarine Grey protective suncover for the i70s and retrofitted i50, i60, i70 and p70. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 5"L WT: 0.3 lbs UPC: 723193812365

Read more less

AS GPSThe AS GPS is an adapter cable that allows APEX chartplotters to connect with a Humminbird external GPS receiver. Combined with an external GPS receiver, users will get extremely accurate position readings with AS GRP receiver (sold separately), or choose to get both accurate GPS readings and a constant compass heading with AS GPS HS (sold separately). AS GPS cable measures 30" in length and connects to the MFD via a waterproof, twist-lock connector.  Compatible with: All APEX models Cable length: 30" (76 cm) 1-Year Limited Warranty Specifications: Type: Antennas Box Dimensions: 2"H x 8"W x 9"L WT: 0.3 lbs UPC: 082324055508

Read more less

GPS160 TriNav Sensor with SeaTalk Interface BundleThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonass and Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14TPI threaded mount Brochure (pdf)

Read more less

GM H910 Gimbal Mount BracketGimbal mount for HELIX 9 and HELIX 10 SeriesWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 12"L WT: 0.95 lbs UPC: 082324048418

Read more less

JCU3 Compact Joystick for M100/200 - Raymarine RayNet NetworkFLIR’s JCU-3 Joystick Controller works with select Thermal Camera Systems to allow full access to the camera’s pan, tilt, zoom and menu settings.  The JCU-3 features 9 buttons plus a rotary controller and joystick trackpad in a compact housing the fits just about anywhere.  The JCU-3 can be mounted either horizontally or vertically using either of the 2 supplied key faces.The JCU-3 is rugged and waterproof for mounting in the pilothouse or on-deck.  It can be surface or flush mounted to your helm, console or bulkhead.  Multiple JCU-3 controllers can be installed to allow control of a single camera from several different locations onboard.The JCU-3’s keypad and rotary knob are backlit for easy viewing at night.  The JCU-3 can bepowered over Ethernet from the vessel’s onboard network, or connected directly to a 12V DC power source and interfaced to the camera with an Ethernet connection.    The JCU-3 is compatible with FLIR M100, M200 (M132, M232) M300, (M300, M332, M354, M364c, M364C LR.

Read more less

Suncover for Cruise 5Protective suncover for Cruise 5" displays. Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 9420064105267

Read more less

ST60+ Sun CoverFits standard surface mounted ST60+ instruments

Read more less

Protective Cover for STRIKER™/Vivid 9" UnitsUse our cover to protect your compatible STRIKER™ from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 2"H x 7"W x 14"L WT: 0.55 lbs UPC: 753759275624

Read more less

Eagle 5" SuncoverThis 5-inch cover is designed for Lowrance Eagle displays.Features:Protects the marine environment Specifications: Type: Covers Box Dimensions: 2"H x 6"W x 10"L WT: 0.35 lbs UPC: 9420064135158

Read more less

White Replacement Bottom Housing Section for NightwaveReplacement bottom housing section (Housing Only). Available in multiple colors, including white, black, and grey. This is a SIONYX official accessory.

Read more less

Honda 5, 8, 9.9. 15 (1980-2000)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Mercury 15, 20 Remote Shift/Throttle & Tiller (2011-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Wind Vane & CupsCompatible Devices: Raymarine ST60 ST60+ i60 ST290 Egg-Shape Masthead Transducers

Read more less

SeaTalk Interconnect Cable, 3ft. (1m)SeaTalk Interconnect cable for linking SeaTalk devicesSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end.

Read more less

RCR-SD/USB-Card ReaderRear - Charging, external storage device for Axiom & Axiom Pro Units

Read more less

Sun Cover for HOOK2 9" SeriesKeep your HOOK2 safe from dirt and debris with a Lowrance Sun Cover Specifications: Type: Covers Box Dimensions: 1"H x 8"W x 11"L WT: 0.4 lbs UPC: 9420024168219

Read more less

iKonvert with USB InterfaceThe iKonvert NMEA2000-0183 Gateway/Converter is an intelligent and flexible gateway for allowing software applications to read/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.Every popular Marine Navigation application that runs on PC/MAC/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.For developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its “RAW Mode” where data can be read/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.Digital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male).  Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in “RAW mode” and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.iKonvert’s USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows/Mac/LINUX/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.Features: Small but powerful bi-directional NMEA2000 Gateway/Converter Powered from the NMEA2000 network High Speed USB 2.0 USB Interface (FTDI) Compatible with Windows, OSX, LINUX and Android Can be configured to operate in “Raw Mode” (Binary PGN data) Converts all of the key navigational data Integral USB (Type A) and NMEA2000 Micro (Male) cables Simple configuration of data modes using DIP switches Full galvanic isolation

Read more less

ST-Ng Right Angle AdapterThis is a 90°, right angle spur connector. Used for the multifunction displays.

Read more less

RayNet to RJ45 Male Cable - 1mRayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 1m (3.28ft.) RayNet to SeaTalkhs (RJ45) cable The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch.When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.

Read more less

E120 Classic To Axiom Pro 12 Adapter PlatePowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120 Classic Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1.05 lbs UPC: 723193824962

Read more less

Bail Mount with Knobs Use our replacement bail mount with knobs to surface mount your GPSMAP® device.Compatible Devices:GPSMAP® 720GPSMAP® 720sGPSMAP® 740GPSMAP® 740sWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 9"L WT: 0.33 lbs UPC: 753759102456

Read more less

20M Power & Ethernet Cable for HALO 2000 & 3000 SeriesSimrad's power and ethernet 20-meter cable specifically for the HALO 2000 and 3000 series.

Read more less

Power Cable for GMS™ 10Garmin's Power Cable specially for the GMS™ 10 Network Port Expander that allows you to connect multiple chartplotters and sensors over the Garmin Marine Network.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 753759046156

Read more less

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier, and prevents crush/bend damage to the cable/connector joint. The cable pullers are reusable, and come in packages of 5 pullers.

Read more less

175 2.25" Ball System Top Plate for 10-12" ScreensFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 15"L WT: 0.85 lbs UPC: 062017001753

Read more less