Simrad SimNet Product to NMEA 2000 Network Adapter CableThe Simrad SimNet Product to NMEA 2000® Network Adapter Cable, manufactured by Simrad, is used to connect a Simrad SimNet product like the NMEA 2000®/NMEA 0183 Adapter (AT10) or CX NavStation Series products to an NMEA 2000® network as shown in the following diagram. The cable is 0.5 meters in length and has a female SimNet connector on one end and a standard male NMEA 2000® Micro Series connector on the other end. Specifications: Data Interface: NMEA 2000 Box Dimensions: 1"H x 5"W x 6"L WT: 0.1 lbs UPC: 809190303485

Read more less

Devicenet Female ADP Cable - SeaTalkng - NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems.Female: 15.7" (0.4m) Specifications: Connection Gender: Female Box Dimensions: 1"H x 4"W x 7"L WT: 0.3 lbs UPC: 723193060452

Read more less

AXIOM Power Cable 1.5M Right Angle & NMEA 2000 ConnectorFeatures: AXIOM Power Cable 1.5M Right Angle NMEA 2000 Connector 90° Specifications: Data Interface: NMEA 2000 Cable Length (Meters): 1.5m Box Dimensions: 1"H x 7"W x 7"L WT: 0.5 lbs UPC: 723193819210

Read more less

NMEA Starter Kit Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with all Red network devices. Compatible With: GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, LCX-112C, LCX-113C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Starter Kits Box Dimensions: 2"H x 4"W x 9"L WT: 1 lbs UPC: 042194533490

Read more less

NMEA 2000 Single Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a single device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each) item# 270105 and 270106 One single tee connector, item# 270101 One 2 meter drop cable, item# 270302 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Starter Kits Box Dimensions: 3"H x 5"W x 8"L WT: 0.8 lbs UPC: 091887982381 Brochure (pdf)

Read more less

NMEA 2000 Dual Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a dual device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each), item# 270105 and 270106 One dual tee connector, item# 270103 Two 2 meter drop cables, item# 270302 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Starter Kits Box Dimensions: 3"H x 5"W x 8"L WT: 1 lbs UPC: 091887982398 Brochure (pdf)

Read more less

NMEA 2000 Power Isolator Ancor's NMEA 2000 Power Isolator can be used for isolating power between 2 independent NMEA 2000 networks. Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues on long networks. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation. Color coded for easy installation and component identification Compatable with all NMEA 2000 micro devices WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Power Isolators Box Dimensions: 2"H x 3"W x 5"L WT: 0.06 lbs UPC: 091887990713 Brochure (pdf)

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Data Interface: NMEA 2000 Cable Length (Meters): 400mm Box Dimensions: 1"H x 6"W x 8"L WT: 0.05 lbs UPC: 723193060339

Read more less

NavLINK Blue NMEA 2000 to Bluetooth GatewayFeatures: NMEA 2000 to Bluetooth Gateway bringing NMEA 2000 connectivity to BT sensors plus phones, tablets, and PCs DY SDK available for quick deployment of BT connectivity Wireless set up of device via browser interface for easy interfacing Turn your iPad into a sophisticated & attractive NMEA 2000 instrument display with NMEA Remote Connect Bluetooth sensors from Ruuvi for wireless pressure, humidity, and temperature monitoring on your NMEA 2000 system

Read more less

ST-Ng to DeviceNet MaleSeaTalkng backbone cable to DeviceNet (Male) - 400mm

Read more less

ST-Ng to DeviceNet FemaleSeaTalkng backbone cable to DeviceNet (Female) - 400mm

Read more less

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network. The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including: SeaTalk 1 to SeaTalkng converter SeaTalkng Terminators (x2) SeaTalkng Blanking Plugs (x2) 400mm (15") SeaTalk 1 to SeaTalkng converter cable SeaTalkng power cable 1m (3.3') SeaTalkng spur cable Features: Easy plug-and-play connectivity with SeaTalkng networks. Works with select SeaTalk 1 instruments, GPS sensors and LifeTag. Included SeaTalkng components establish basic backbone connectivity. Easily expanded using Raymairne SeaTalkng network components. Owner's Manual (pdf)

Read more less

NMEA 2000 1M Drop CableThis Digital Yacht cable is a 1m (3ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 1m (3ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 1m Box Dimensions: 1"H x 7"W x 7"L WT: 0.2 lbs UPC: 703791696338 Quick Guide (pdf)

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Cable Length (Meters): 9m Box Dimensions: 1"H x 7"W x 9"L WT: 0.95 lbs UPC: 091975004841

Read more less

NMEA 2000 Drop Cable - 1MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. The drop cables are available in four lengths from 0.5 meter (1.6 feet) to 5 meters (16.4 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Super flexible 22 AWG power conductors for ease of installation and wire routing NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 1m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs UPC: 091887988420 Brochure (pdf)

Read more less

NavAlarm NMEA 2000 Audio AlarmFeatures: Universal NMEA 2000 alarm – guaranteed to wake even the deepest sleeping crew member! Ultra loud 102dB sounder for any NMEA 2000 alert Compatible with standard NMEA 2000 alert PGNs  – becoming mandatory for MFDs from all manufacturers Dual volume alert levels Ultra rugged and IPx5 waterproof protection Integrated silence/reset switch Ideal accessory for CO Alert, MOB Alert, or NavAlert products and any other NMEA 2000 device generating Alert PGN – EG: Sea AI, Talos lightening alert etc

Read more less

NMEA 2000® Backbone/Drop CableExtend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone/drop cable.Compatible Devices: AIS™ 300/600 Blackbox Transceiver GBT™ 10 GCL™ 20 Low-light Imaging Camera GDL™ 40 GET™ 10 GFL™ 10 GFS™ 10 GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™ GHP™ 20 Marine Autopilot System with SmartPump GMI™ 10/20 Marine Instrument GPS 19x NMEA 2000® GPSMAP® Series VHF 200/300 Marine Radio VHF 300 AIS WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Cable Length (Meters): 0.3m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 1"H x 5"W x 7"L WT: 0.09 lbs UPC: 753759078447

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Data Interface: NMEA 2000 Cable Length (Meters): 1m Box Dimensions: 1"H x 5"W x 6"L WT: 0.05 lbs UPC: 723193060346

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Data Interface: NMEA 2000 Cable Length (Meters): 5m Box Dimensions: 1"H x 7"W x 7"L WT: 0.55 lbs UPC: 723193060360

Read more less

Spur CableRaymarine 3 meter Spur Cable for SeaTalkng Specifications: Cable Length (Meters): 3m Box Dimensions: 1"H x 7"W x 8"L WT: 0.5 lbs UPC: 723193060407

Read more less

NMEA 2000 terminator - femaleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Female Data Interface: NMEA 2000 Box Dimensions: 1"H x 1"W x 1"L WT: 0.02 lbs UPC: 753759078171

Read more less

NMEA 2000 Backbone Cable - 10MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 10m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 9"W x 10"L WT: 2.8 lbs UPC: 091887982251 Brochure (pdf)

Read more less

NMEA 2000 6M Drop CableThis Digital Yacht cable is a 6m (20ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 6m (20ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 6m Box Dimensions: 2"H x 7"W x 10"L WT: 0.75 lbs UPC: 703791696352 Quick Guide (pdf)

Read more less

Maretron NM-NM Mini Gender Changer, Male to MaleMaretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets reversed and a gender changer can be used to get back to the desired connector type.Waterproof seals for reliable connections Easily swap connector gender to get back to desired connector type Specifications: Connection Gender: Male-Male Box Dimensions: 1"H x 2"W x 5"L WT: 0.21 lbs UPC: 873804002392

Read more less

NMEA 2000 right angle cableWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 2m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 1"H x 4"W x 5"L WT: 0.4 lbs UPC: 753759078270

Read more less

NMEA 2000 90° Elbow ConnectorAncor's NMEA 2000 Approved 90 degree elbow makes cable routing easier. The connector is installed between two cables to reduce stress on the cables and create a compact installation.Features: Color coded for easy installation and component identification NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 1"H x 3"W x 5"L WT: 0.06 lbs UPC: 091887982336 Brochure (pdf)

Read more less

NMEA 2000 Backbone Cable - 5MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 5m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 7"W x 8"L WT: 1.4 lbs UPC: 091887982244 Brochure (pdf)

Read more less

NMEA 2000 Single Device Backbone Starter KitBasic starter kit for adding a new NMEA 2000 network to your boat.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 3"H x 7"W x 7"L WT: 1.9 lbs UPC: 091887991338

Read more less

Attaches to Maretron SIM100 for NMEA 2000 network monitoring Real Test technology allows for functional testing in the field Trouble relay for circuit trouble or detector end of life notification Provides wiring supervision 4-wire detector; mounts to wall or ceiling WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

GPS160 TriNav Sensor w/iKonvert NMEA 2000 Interface BundleThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonass and Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system – when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount Specifications: Data Interface: NMEA 2000 Box Dimensions: 4"H x 7"W x 10"L WT: 1.5 lbs UPC: 703791696055 Brochure (pdf)

Read more less

NMEA 2000 Drop Cable - 5MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. The drop cables are available in four lengths from 0.5 meter (1.6 feet) to 5 meters (16.4 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Super flexible 22 AWG power conductors for ease of installation and wire routing NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 5m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 7"W x 8"L WT: 0.8 lbs UPC: 091887988468 Brochure (pdf)

Read more less