1.25" BSP Displacement Hull Tank AdapterAdapter from Maretron for displacement hull tanks.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Micro-C Female to SimNet Cable Simrad's Micro-C Female to SimNet 1M Cable Specifications: Type: Cables Box Dimensions: 1"H x 4"W x 4"L WT: 0.15 lbs UPC: 809190312579

Read more less

DST-810 Bronze Triducer Multisensor NMEA 2000 N2K - 6M CableThe DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC-based software.Besides water temperature, depth and newly upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive and is independent of the onboard instruments.All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays. Specifications: Temperature: Yes Speed Included: Yes Pins: 5 Mounting Style: Thru-Hull Imaging: N/A Chirp: No Cable Length (Feet): 20' Box Dimensions: 4"H x 8"W x 10"L WT: 1.48 lbs UPC: 9420064117901

Read more less

Honda 8, 9.9, 15 & 20 (2001-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Integrated Rudder Feedback UnitsOC15SUK27ETypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 628309166595

Read more less

Integrated Rudder Feedback UnitsOC15SUK27BTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs UPC: 628309166571

Read more less

Helmsman AdapterUsed to retrofit existing mounting hole sizes 4-1/4" - 5" in diameter.Includes: Adapter Ring Gasket Mounting Screws Instructions and addendum For use with: HF-742, HF-743 or SS-1002

Read more less

Explorer CompassFeatures: 2 3/4″ (70 mm) Easy to Read Direct Reading Dial Compact Low-Profile Design Quick Push-Button Removal of Compass Module for Storage and Security Choice of Colors Internal Green Night Illumination Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield High Temperature Composite Construction for Extended Operating Range 100% Repairable Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1 lb. (454g) Notes:Comes standard with 12 volt lighting. 6 & 24 volt lighting options are available.Some custom built OEM models may have different lighting.  Specifications: Read: Front Mounting Style: Surface Lubber Lines: Yes Backlight: Yes Box Dimensions: 4"H x 6"W x 9"L WT: 0.7 lbs UPC: 010342160508 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Explorer CompassFeatures: 2 3/4″ (70 mm) Easy to Read Direct Reading Dial Adjustable and Removable with Bracket and Thumbscrews Internal Green Night Illumination Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield High Temperature Composite Construction for Extended Operating Range 100% Repairable Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1lb (454g)Notes: Comes standard with 12v lighting. 6 & 24v lighting options are available.Some custom built OEM models may have different lighting.  Specifications: Backlight: Yes Mounting Style: Bracket Lubber Lines: Yes Read: Front Box Dimensions: 5"H x 5"W x 6"L WT: 1 lbs UPC: 010342160102 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Navigator CompassFeatures: 4 1/2″ (115 mm) Open Face Dial with Large Numerals Easily Installed, Fits 4.75″ (121 mm) to 5.125″ (130 cm) Mounting Hole Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Powerful DirectiveForce Magnets for Fast Heading Lock-on 12v Green LED lighting Standard Built-in Compensators to Easily Adjust for Deviation Movable Sun Shield 45 Degree Lubber Lines High Temperature Construction for Extended Operating Range 100% Repairable Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 2 lbs 10oz (1.19kg)Notes:Comes standard with 12v lighting. 24 & 32v lighting options are available. Some custom built OEM models may have different lighting. Specifications: Backlight: Yes Lubber Lines: Yes Read: Rear Mounting Style: Flush Box Dimensions: 7"H x 8"W x 8"L WT: 2.9 lbs UPC: 010342150004 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Explorer CompassFeatures: 2 3/4″(70 mm) Direct Reading Dial Easily Installed, Fits 3″ Instrument Hole. Bezels Styled to Match Popular Gauge Packages 12v Night Illumination Viewing is adjustable to 30 degrees Choice of Traditional Black or Designer White Colors Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Built-in Compensators to Easily Adjust for Deviation Hi-Temperature Construction 100% Repairable Exclusive 5-Year Warranty Approx. Shipping Weight: 1lb (454g)Notes:All compasses come standard with 12v lighting. 24v lighting option is available. Some custom built OEM models may have different lighting. Specifications: Read: Front Mounting Style: Dash Backlight: Yes Lubber Lines: Yes Box Dimensions: 5"H x 6"W x 6"L WT: 0.8 lbs UPC: 010342160614 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

GT20-TM Transom Mount DownVü 500W (CHIRP 455/800kHz); Traditional 500W (77/200kHz) Transducer w/Temp - 8-PinGet ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 8-pin transducer.This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and 0 to 70 transom angle.Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Pins: 8 Imaging: Standard/Down Chirp: Non Traditional Cable Length (Feet): 20' Mounting Style: Transom Box Dimensions: 3"H x 7"W x 7"L WT: 1.5 lbs UPC: 753759152765

Read more less

NMEA 2000 3M Drop CableThis Digital Yacht cable is a 3m (9ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 3m (9ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 3m Box Dimensions: 1"H x 6"W x 8"L WT: 0.4 lbs UPC: 703791696345 Quick Guide (pdf)

Read more less

veKonvert NMEA 2000 GatewayveKonvert brings NMEA 2000 connectivity to Victron’s popular SmartShunt battery monitoring system. Now a navigation multi-function display becomes a sophisticated battery and energy management system.FeaturesveKonvert is a stand-alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors, and MPPT Solar Charge Controller range into NMEA 2000 systems.This functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower-cost, simpler solution for smaller installations that just need the electrical data displayed on a multi-function display.Boaters and boat builders like a clear and uncluttered dash or nav area, so integrating electrical data into the main navigation display is a popular and cost-saving option.The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.Victron solar charge controllers (MPPTs) and battery monitors can now also interconnect to your NMEA 2000 MFD via the veKonvert interface.InstallationInstallation is simple – just "T" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt, and you've got battery and electrical data on your NMEA 2000 network!  Note that one veKonvert is required for each battery bank.Specifications: Universal NMEA 2000 gateway for Victron products with a VE.Direct interface Enables battery management or solar charge monitoring on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc) Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm Easy installation, plug ‘n’ play connectivity, and self-powering from the NMEA 2000 bus Generates NMEA 2000 alerts from any BMV or SmartShunt Alarms Supports multiple SmartShunts for a larger multi-battery system VeKonvert Is Compatible with the Following Victron Products:BMV-700, BMV-702, BMV-700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge ControllersThe veKonvert will automatically detect what Victron device it is connected to and adjust the NMEA 2000 data that it outputs accordingly. Below is a list of the PGNs that the veKonvert outputs for the different Victron Devices and different modes that they can operate in:  All MPPTs PGN 127506 DC Detailed Status (DC Type set to MPPT) PGN 127508 Battery Status (MPPT Output Voltage and Current) PGN 130900 Proprietary Solar Controller (All solar panel data) All SmartShunts and BMVs PGN 127506 DC Detailed Status (DC Type set to Battery, SOC and A/h consumed) PGN 127508 Battery Status (Output Voltage and Current) NOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.

Read more less

GPS160 TriNav Sensor with USB OutputThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonassand Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount Specifications: Type: Antennas Box Dimensions: 4"H x 7"W x 10"L WT: 1 lbs UPC: 703791696048 Brochure (pdf)

Read more less

6-Pin Female to 8-Pin Male AdapterThis adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 753759976279

Read more less

B164 1kW Tilted Element 20° - 8-PinGarmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Pins: 8 Mounting Style: Thru-Hull Imaging: Standard Cable Length (Feet): 39' Chirp: No Box Dimensions: 8"H x 10"W x 12"L WT: 11 lbs UPC: 753759971908 Owner's Manual (pdf)Brochure (pdf)

Read more less

IDMK X12 XPLORE 12 In-Dash Mounting BracketIn-dash mounting kit for the Humminbird XPLORE Series fish finder is made with rugged, high-strength aluminum for a quick and easy install. This kit includes mounting hardware.Features: Allows for quick and easy in-dash installation Rugged, high-strength aluminum design Contains all necessary mounting hardware 1-Year Limited Warranty

Read more less

NMEA 2000 Drop Cable - 2MThis 2 meter NMEA 2000 drop cable offers connection between a NMEA 2000 device and T-connector. The couplers connect to the corresponding T-connectors, creating a simplified installation.Features: Includes (1) NMEA 2000 drop cable Cable length: 2 meter (3.25 ft) 1-Year Limited Warranty

Read more less

**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.MDA-5 Hi-Power 5W SOTDMA Class B AIS Transceiver w/Built-In Antenna Splitter & Long Range Wi-FiFeatures: The MDA-5 is the world's most sophisticated fully certified 5-Watt SOTDMA Class B AIS Moble on the market 5-Watt transmitter power, Higher Output power means your vessel will be seen at longer ranges by other vessels and via AIS websites SOTDMA Class A Priorities means that your vessel will always transmit and be seen in very congested Commercial Harbors and Ports where traditional Class B units don"t have network priority. Intergrated zero loss VHF antenna splitter - no second antenna needed Built-In 802.11 b/g/n Long Range WIFI allows unit to send AIS and Position data to any WIFI connected devices NMEA-0183 data port, NMEA-2000 & USB intelligent connectivity to all bridge systems Built-In GPS & GLONASS satellite navigation receiver Water Proof certified to IPX7 Dual Receivers decodes all DSC & AIS messages, including MOB & SART Ultra-power efficient IEC-62287-2, FCC and USCG certified 2 Year Warranty Package Includes: Commercial Grade External GPS Antenna with Coax Cable Mounting hardware Power & Data Interface cable VHF Radio Connection cable Product Information DVD, with ProAis2 Software for Programming & Troubleshooting User Manual & Quick Start Guide Specifications: Transmitter Output Power: 5 Watts VHF Antenna Connector SO-239 UHF GPS Antenna Connector TNC Frequency Range: 156.025-162.025 Mhz Input Voltage: 9.6-31.2 VDC Current Draw: 220mA average power consumption Operating Temperature Range: -25C to +55xC Ingress Protection: IP67 Dimensions (transceiver): 6.8" W x 5.0" H x 2.0" D Weight 0.8 lbs. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B GPS Included: Yes Function: Receive/Transmit Display Included: No Antenna Included: No Box Dimensions: 5"H x 10"W x 14"L WT: 3.5 lbs UPC: 010407510705 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

The XN10A/3.5 is a well designed 3.5' open array Antenna. The XN10A has a 2.2 horizontal beam width. Its range is 48 nautical miles. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Array Size (Inches): 42" Box Dimensions: 18"H x 18"W x 44"L WT: 14 lbs UPC: 611679249173

Read more less

Bail Mount with Knobs for echoMAP™ 70dv/70s & GPSMAP® 741/xsSurface mount your echoMAP™ or GPSMAP® using our bail mount with knobs. The mount tilts for optimum viewing.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 6"W x 9"L WT: 0.35 lbs UPC: 753759998363

Read more less

CCU Extension Cable 5MMount your CCU farther than 3 m (9.8') away from the ECU with a 5 m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 7"W x 9"L WT: 0.8 lbs UPC: 753759102685

Read more less

N2KEXT-15RD 15' NMEA 2000 Cable15' NMEA 2000 Cable Specifications: Data Interface: NMEA 2000 Connection Gender: Male-Female Cable Length (Meters): 4.5m Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs UPC: 042194529745

Read more less

Elite FS 10 with Active Imaging 3-In-1The Elite Fishing System (FS) gives you access to the full line-up of Lowrance fishfinding tools – including ActiveTarget™ 2 live sonar, Active Imaging™ and Active Imaging™ HD*, and preloaded C-MAP® Discover Onboard charts – to help you make the most of your time on the water. Target Fish Live With ActiveTarget 2 Live SonarFish smarter when you know exactly what fish are doing – in real-time – with ActiveTarget™ 2 Live Sonar. Enjoy high-resolution views of fish movements, tracking them as they swim in and around the cover.Watch their real-time response to your lure and you will know if your current technique is working or if it’s time to switch things up.  Note: No ActiveTarget 2 split screen options in 10 & 12 models Find More Fish With Active Imaging 3-In-1See structure and cover with a new level of refined detail and at a range unmatched by any other structure imaging technology with Active Imaging™  and Active Imaging™ HD* 3-in-1 sonar featuring CHIRP, SideScan, and DownScan Imaging™ with FishReveal™.Get the best of CHIRP sonar and DownScan Imaging™ on one screen with FishReveal, a Lowrance exclusive that helps you easily recognize fish from structure and cover on high-detailed DownScan images.Find Key Fishing Areas With C-MAP Discover OnboardSpend more time trying to catch fish and less time trying to find them with the high-resolution detail of C-MAP® Discover Onboard inland and coastal charts built into Elite FS displays.From finding key fishing areas, like ledges, drop-offs, and ditches to navigating with precision to fish-holding areas, you will have more success on the water with high-resolution 1-foot contours on 19,000 lakes across the U.S. and more than 9,400 in Canada.Features: ActiveTarget™ 2 Live Sonar ready  Active Imaging 3-in-1 ready  Active Imaging HD 3-in-1 ready with a S3100 Sonar Module  FishReveal™  Preloaded C-MAP Discover Onboard with 1-foot contours 19,000 lakes across the U.S. and more than 9,400 in Canada, plus mapping options including C-MAP, Navionics®, and more C-MAP® Easy Routing, Navionics® Autorouting™ capability  C-MAP Genesis Live onscreen mapping  High-resolution multi-touch touchscreen   Integrated wireless, NMEA 2000® and Ethernet connectivity  Full touchscreen control of Recon™ and Ghost® Trolling Motor, as well as Power Pole® Anchors  Sirus XM weather compatibility with WM4 *Active Imaging HD requires S3100 Module  Specifications: Cartography Brand: Navionics/C-Map/Lowrance Included Transducer: 000-14489-001 Screen Size: 10" Touchscreen: Yes Transducer Included: Yes Box Dimensions: 6"H x 14"W x 16"L WT: 11.7 lbs UPC: 9420064137459

Read more less

Elite FS 9 Chartplotter/Fishfinder with Active Imaging™ 3-in-1 Transom Mount TransducerThe Elite Fishing System (FS) combines the power of Lowrance’s proven and newest fishfinding tools with a more affordable display that’s easier to use and install. From ActiveTarget™ live sonar and extreme high-resolution Active Imaging™ with Lowrance CHIRP sonar, SideScan and DownScan Imaging™ to preloaded C-MAP® Contour+ Fishing Maps, Elite FS gives you all the tools you need to find and catch more fish.Key Features 9" Display ActiveTarget™ Live Sonar ready with optional ActiveTarget™ live sonar and transducer (000-15593-001) Active Imaging™ 3-in-1 transom mount transducer included FishReveal™ Preloaded C-MAP® Contour+ with 1-foot contours on 8,900 lakes Other mapping options including C-MAP, Navionics® and more C-MAP® Easy Routing, Navionics® Autorouting capability C-MAP Genesis Live onscreen mapping High-resolution multi-touch touchscreen  Integrated wireless, NMEA 2000® and Ethernet connectivity Full touchscreen control of Power Pole® anchors and Ghost® Trolling Motor C-Map Contour+ Mapping PreloadedYou will spend more time trying to catch fish and less time trying to find them with the high-resolution detail of the C-MAP Contour+ charts built into Elite FS displays. From finding key fishing areas, like ledges, drop-offs and ditches to navigating with precision to fish-holding areas, you will have more success on the water with high-resolution 1-foot contours on 8,900 lakes.Key Features Custom depth shading Easy routing, Lowrance presentation for icons High-Resolution, Bathymetric 1-foot contours on 8,900 U.S. lakes Standard navigation data Fishing POIs Specifications: Transducer Included: Yes Touchscreen: Yes Screen Size: 9" Included Transducer: 000-14489-001 Cartography Brand: Navionics/C-Map/Lowrance Box Dimensions: 6"H x 14"W x 16"L WT: 10.65 lbs UPC: 9420064116942 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

10" Protective Cover - PlasticKeep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 2"H x 10"W x 11"L WT: 0.4 lbs UPC: 753759219116

Read more less

Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 0° Tilt, 8-Pin - Airmar B175HWStep up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage.The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, high, and high wide versions provide maximum flexibility for the choice of frequencies.An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 600'; an operating frequency of 150-250 kHz; a beamwidth of 25°; and a 0 to 7° deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Pins: 8 Mounting Style: Thru-Hull Chirp: High Wide Cable Length (Feet): 39' Imaging: Standard Speed Included: No Box Dimensions: 8"H x 10"W x 12"L WT: 11 lbs UPC: 753759123536

Read more less

Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 7"L WT: 2.6 lbs UPC: 753759298517

Read more less

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm LengthFresh Water Level Sensor (capacitive) with adjustable dip, sealing kit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Temperature Sender 1/8" NPTF Cylinder Head TempFeatures: Temperature Sender 1/8" NPTF NPTF Cylinder Head This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

3-3/8" (85MM) OceanLink® NMEA 2000® Tachometer - 7000 RPM - Black Dial & BezelThe new OceanLink® Tachometer automatically presents all the key data ranging from oil pressure and fuel consumption to operating hours – on a generously proportioned inverted dot matrix digital display. Besides a CAN interface with NMEA 2000® certified and SAE J1939 data protocol it features two inputs for analog sensors. The innovative EasyLink data connection makes the installation easy and cost effective. Satellite instruments for further dynamic measurement values receive updates from the central instrument every 20 msecOcean Link Technical Information: 1x NMEA 2000® input 1x J1939 and analog input Reverse polarity protection Protection rating IPX5 Operating temperature range -20 °C / +70 °C 12/24V WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/System Check Voltage - Input Range (Volts): 12/24v Gauge Size: 3-3/8" Box Set: No Series: OceanLink Box Dimensions: 4"H x 8"W x 8"L WT: 0.85 lbs UPC: 7640178720985

Read more less

Rudder Angle Sensor f/ Single Station Technical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 3 - 180 Ohm Resistance value -  3 - 180 Ohm Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire system Sensor Signal - Insulated Return *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Box Dimensions: 3"H x 4"W x 6"L WT: 0.5 lbs UPC: 7640178725126

Read more less

iKreate NMEA 2000 Simulator with USBFor anyone involved in designing, manufacturing, or installing marine electronics, the ability to simulate or replay NMEA2000 data is a real advantage and can accelerate software development, demonstrate NMEA2000 devices, or help diagnose network issues.With more and more modern boats having an NMEA2000 network at the heart of their navigation system, it is really important that you have the tools to investigate the devices and data on the network should things not work as planned.Consisting of an iKreate USB interface and an HTML5-based web app, the iKreate simulator can generate any number of NMEA2000 PGNs or replay saved log files of real-life network data from any NMEA2000 system, regardless of brand.This package includes iKreate to connect to the NMEA 2000 network and the simulator software to generate any number of NMEA2000 PGNs.Just like our NMEA2000 Display App, the iKreate Simulator takes a new approach and is the World’s first multi-platform, browser-based NMEA2000 Simulator App that will run on Windows, LINUX, Mac OS X, and Raspbian. There is no installation, and if you can save a file and find it again, then that is as complex as it gets with just a single HTML5 file to worry about (less than 0.5MB in size).You need to use the app with a browser that supports the Web Serial API, which currently includes Chrome, Chromium, MS Edge, and Opera. We also plan to support Firefox going forward (with its WebSerial Extension), but this was not possible for the first release of the app.Features: Create individual NMEA 2000 PGNs from a drop-down list populated with the data you enter, or play back a NMEA 2000 log file captured by a Digital Yacht NMEA 2000 product, etc, from an on-board system Multiple PGN groups can be created and even saved for future use The data variance function can synthesise changing values No complicated software to install – just a simple file for Chrome, Edge, Opera or Chromium Functions on PC, MAC, and Linux platforms – simple USB connection Set SRC address and instance Integrated 0.8m NMEA 2000 and 0.8m USB cable Available with USB-C connector (USB-A option) What's In The Box? iKreate USB Interface Software to download via link Owner's Manual (pdf)

Read more less

LANLink NMEA 0183 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.Features: NMEA 0183 to ethernet gateway version 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection The web user interface for easy setup from the connected device via the browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm

Read more less

HELIX 7 GPS CHIRP MSI G4The HELIX 7 MEGA SI GPS G4 fish finder features MEGA Side Imaging, MEGA Down Imaging, Dual Spectrum CHIRP Sonar, AutoChart Live, Internal GPS, and Humminbird Basemap built-in. An upgraded high-definition 7" display will give you the best view of the many pre-loaded split screen view options, so users never miss a fish.Features: Keypad control: Master HELIX at the touch of a button. Access the pre-loaded views from the user-friendly menu system, operated by softkey controls that allow you to reliably operate your fish finder in any condition. MEGA Side Imaging: See the world below like never before with crystal-clear viewing out to 125 feet on either side of the boat. Users unlock new details with up to 3X more detail than standard Side Imaging sonar. MEGA Down Imaging: Get unprecedented underwater clarity with coverage down to 125 feet below your boat. Unlock new details with up to 3X more detail than standard Down Imaging sonar. Dual Spectrum CHIRP sonar: Before you cast, know what's down there thanks to highly-detailed fish arches and a clear view of the fish-holding structure and the bottom. Powered by our proprietary, Low-Q CHIRP transducer, Dual Spectrum CHIRP 2D sonar offers two ways to search; Wide Mode for maximum coverage and Narrow Mode for focusing on the slightest detail. Internal GPS and Humminbird Basemap: Our enhanced basemap provides you with a clear view of underwater terrain and surrounding points of interest so you can fish and navigate with total confidence. Identify buoys, day markers, hazards, marinas, contours, depth markers, and much, much more. Includes charts of more than 10,000 lakes, plus coastal coverage for the continental U.S. Premium Chart Compatible: Humminbird provides the most complete offering of premium chart options to anglers everywhere. Get a complete view of the world below with optional charts from Humminbird's LakeMaster® and CoastMaster™ products, as well as your choice of compatible Navionics® charts. AutoChart Live: Create real-time maps of your fishing spots, with access to patented Humminbird® LakeMaster® features. Map depth contours, bottom hardness, and vegetation as you drive your boat. Comes standard with eight (8) hours of built-in recording time and is compatible with AutoChart Zero Line SD cards for virtually endless AutoChart Live mapping capacity. Includes control head, transom-mount transducer, power cable, gimbal mounting bracket, and mounting hardware. 1-Year Limited Warranty Specifications: Display Size - Diagonal: 7" Display Pixel Matrix: 1024H x 600V Transducer Included: XNT 9 HW MSI 150 T Compatible With: Minn Kota US2 Sonar, Minn Kota Built-In MEGA DI, AIS, AutoPilot Features: Down Imaging, Built-In GPS, Side Imaging, Dual Spectrum CHIRP, Built In Mapping, MEGA Imaging Memory Card Slot: Single Micro SD Sonar-Standard: Dual Spectrum CHIRP, MEGA Down Imaging, MEGA Side Imaging Sonar-Coverage: 20°, 42°, 60° & (2) 86° @ -10dB Sonar-Optional: 53 kHz, 50/Low Airmar CHIRP CHIRP - Frequencies Supported: Narrow Mode (180-240 kHz), 83/200 (75-155/130-250 kHz), Wide Mode (140-200 kHz), Full Mode (150-220 kHz) Sonar-Frequencies Supported: 50/83/200/455/800 kHz & 1.2 MHz Depth-Sonar: 3,500' (optional 50 kHz), 1,200 ft (standard transducer) CHIRP - Imaging Frequencies Supported: 455 kHz (440-500 kHz), MEGA SI (1075-1150 kHz), MEGA DI (1075-1150 kHz) Depth-Down Imaging: 75 ft (MEGA), 400 ft (455 kHz) Range-Side Imaging (Side-To-Side): 800 ft (455 kHz), 250 ft (MEGA) Interface: Keypad Control Power Draw: 800 mA Power Input: 10.8-20 VDC Power Output Peak-to-Peak: 4000 Watts Power Output RMS: 500 Watts Screen Snap Shot: Included Sonar Recording: Included Mount-Standard: Gimbal Mount-Standard Size: 10.54 in W x 5.8 in H x 3.68 in D Mount-Optional: In-Dash Mounting Kit Mount-Optional Size: 10.54 in W x 5.44 in H x 1.13 in D Transducer Mount Location: Transom GPS Chartplotting: Included GPS Receiver: Internal GPS Trackplotting: Included Waypoints, Routes, Tracks/Points: 2,750, 47, 50/20,000 360 Imaging Compatibility: No MEGA Live Compatibility: No Humminbird Basemap: Included LakeMaster Compatibility: Yes CoastMaster Compatibility: Yes Navionics Gold/HotMaps Compatibility: Yes Navionics Platinum+ Compatibility: Yes Platinum Compatibility: Yes Minn Kota i-Pilot Link Compatibility: No Minn Kota Talon Shallow Water Anchor Compatibility: No Radar Compatibility: No 5-Port Ethernet Switch Compatibility: No AIS Compatibility: Optional Autopilot Compatibility: Yes Heading Sensor GPS Compatibility: Yes Target Separation: 2.5" Interference Rejection: 6 Modes Noise Rejection: 10 Steps Upgradable Software: Yes View Preset Keys: No X-Press Menu System: Yes Custom Digital Readout: Yes Custom View Selections: No Display Colors Grayscale: 16-Bit Display Type: Color TFT Speed: Included Temperature: Built In Temperature Alarm: Yes Temperature Graph: Yes HDMI Compatible: No Warranty: One-Year Warranty Specifications: Cartography Brand: Humminbird/Navionics Included Transducer: XNT-9-HW-MSI-150-T Screen Size: 7" Touchscreen: No Transducer Included: Yes Box Dimensions: 5"H x 14"W x 17"L WT: 5.2 lbs UPC: 082324058295 Owner's Manual (pdf)

Read more less

i40 Depth DisplayCompact and feature-packed instruments, the i40 series instruments are smart choice for boaters looking high performance and great value.The i40 series is simple to operate thanks to the use of just three control buttons, i40 has extra-large digits and razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. These SeaTalk® compatible instruments offer full integration with Raymarine autopilots and navigation equipment. The ultra-sleek design of i40 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. All i40 Instruments come with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i40 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 0.4 watts for superior run-time and excellent green credentials. The i40 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i40 Depth Instrument Raymarine's i40 Depth Instrument is available as a complete system with a thru-hull transducer, Transom Mount or as a display-only kit enabling you to monitor your boat's depth at a remote location. The i40 Depth Instrument offers easy-to-read displays of current depth, and minimum depth recorded. The unit also offers a convenient shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. The i40 Depth Instrument offers convenient depth offset controls allowing you to calibrate the readout to compensate for projections (rudders, props, skegs etc.) or to display the depth from the waterline of the vessel.i40 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. High contrast LCD displays with large digits for excellent visibility. Red backlighting for outstanding night-time visibility. Simple SeaTalk networking with other Raymarine instruments, autopilots and MFDs. Built-in transducer connections simplify installation. Small form factor saves space at the helm without sacrificing features. Specifications: Transducer Type: Not Included Shape: Rectangular Screen Size: 3.7" Instrument Function: Depth Depth - Max (Feet): 400' Frequency: 200Khz Box Dimensions: 3"H x 7"W x 10"L WT: 1.8 lbs UPC: 723193730843 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

High-Temperature Smoke/Heat Detector KitMaretron's High-Temperature Smoke/Heat Detector Kit is an intelligent NMEA 2000® networked solution, designed to alert you of unusually fast rises in temperature or smoke.This kit contains a smoke/heat detector, auxiliary relay, and sounder that are designed to work in high-temperature marine environments, such as engine rooms. The components in this kit are rated from -25°C (-13°F) to +70°C (158°F). This system is designed to work with a 24 VDC power supply.Features: Kit contains a smoke/heat detector, auxiliary relay, and sounder Designed to work in high-temperature marine environments, such as engine rooms Connects to an NMEA 2000® network via a Maretron SIM100 Switch Indicator Module (sold separately) Rated from -25°C (-13°F) to +70°C (158°F) For use with a 24 Volt DC power supply

Read more less

ICE PTC CHIRP H5 FB - Portable Ice Kit with CHIRP Ice Transducer for HELIX 5The ICE PTC CHIRP H5 FB is a portable ice fishing kit for Humminbird HELIX 5 models with CHIRP sonar technology. Convert your HELIX 5 model for ice fishing with the included accessories: portable shuttle with carrying handle, premium Humminbird bag, Dual Spectrum CHIRP ice transducer with float, gimbal mounting brackets, HELIX power cable, and installation hardware. This kit will require a battery and charger to operate the HELIX fish finder (sold separately).Features: Compatible with: HELIX 5 G2/G3 Kit includes: Portable shuttle with carrying handle, bag, Dual Spectrum CHIRP ice transducer with float, HELIX power cable, and installation hardware. 1-Year Limited Warranty Quick Guide (pdf)

Read more less

GM H7R2 Gimbal Mount for HELIX 7 G4N ModelsThe GM H7 is a gimbal mount for HELIX 7 G4N products. This includes the gimbal mount, knobs, and mounting hardware. Features: Compatible with: HELIX 7 G4N models Includes gimbal mount, knobs, and mounting hardware 1-Year Limited Warranty Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 12"L WT: 0.8 lbs UPC: 082324056451

Read more less

Adapter Cable SeaTalk (1) to SeaTalkNG - 1MAn adapter spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70.SeaTalkNGRaymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkNG connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adapters and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adapters.

Read more less

GPS160 TriNav Sensor with NMEA 0183 OutputThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonassand Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount Specifications: Data Interface: NMEA 0183 Box Dimensions: 4"H x 7"W x 10"L WT: 1.2 lbs UPC: 703791696031 Brochure (pdf)

Read more less

CPT-S Thru-Hull - High Chirp - Plastic - 0°Connects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downvision element.Features: High Chirp Sonar Max Depth: 900' CPT-S 0° plastic is perfect for a sailboat application MFD must have version 16 software or later Specifications: Speed Included: No Mounting Style: Thru-Hull Imaging: Standard Chirp: High Box Dimensions: 6"H x 7"W x 12"L WT: 2.2 lbs UPC: 723193813096

Read more less

Raymarine i70s Sailing System Pack, Wind, Depth, Speedi70s Multi Display E70327Maximum Visibility and Maximum VersatilityThe i70s multifunction gives you the flexibility to display instrument andnavigation data that is most important to you. Equipped with a bold andbright 4.1_ display, the i70s is easy-to-customize with digital, analogueand graphical displays of depth, speed, wind and more. Add the i70s to yourexisting Raymarine instrument system or create a network of i70s displaysand sensors, the choice is yours.Features: 4.1" super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brightercolors, sharper contrast, and a wide viewing angle Glass bridge industrial design compliments Raymarine eS and gS Seriesmultifunction displays Simple user interface with sculpted rubber keypad for precise operationin all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems andNMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIStargets Combine the i70s with the ITC-5 instrument transducer convertor andconnect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70ssmart transducer Supplied with both black (eS Series style) & (e Series style) gunmetalbezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is requiredfor connecting the i70s to NMEA2000 backbone.Intuitive LightHouse User InterfaceThe i70s places frequently used navigation functions right at yourfingertips. The LightHouse instrument interface is consistent with RaymarineLightHouse multifunction displays, so Raymarine MFD users will feel right athome with the i70s.NetworkingRaymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkngadapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s featuresuser-selectable data sources, for integration with multi-sensornetworks. AIS RepeaterDisplay AIS targets from NMEA 2000 AIS receivers. View the closest 25AIS-equipped vessels and select individual targets to obtain vesselinformation.iTC5 Transducer Converter E70010The iTC5 Instrument Transducer Converter enables the use of common analogtransducer signals with new digital instrument displays like Raymarine's i70and ST70 Plus. The ultra-compact iTC5 has connections to host the five mostcommon analog transducers; depth, speed/temperature, wind, compass andrudder. The iTC5 instantly converts these 5 analog signals to digitalSeaTalkng protocol.In addition to providing analog-to-digital conversion, the iTC5 provides allof the necessary power and communications connections to the transducers.This greatly simplifies the installation of new systems, and also provides asimple and cost-effective means for owners of older analog instrumentdisplays to upgrade to the latest digital display technology. The iTC5eliminates the need for expensive "smart" transducers or individualinstrument pods. Complete control for calibration and alarms is performedthrough the i70 or ST70 Plus instruments.The iTC5 connects to Raymarine's SeaTalkng network and works withmost analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80and ST290 series instruments. Additionally the iTC5 works with Raymarinefluxgate compass modules as well as rotary and linear rudder feedbacktransducers to support compass heading and rudder angle instruments.Features: All-in-one analog to digital converter for depth,speed/temperature, wind, compass and rudder transducers Outputs SeaTalkng and NMEA2000 data to digital instruments,MFDs and more Enables easy upgrade of legacy analog instrument displays withoutreplacing transducers SeaTalkng network provides all necessary power and dataconnections Ideal for use with Raymarine i70 and ST70 Plus digital instrumentsystems Wind Vane E22078Standard Forward Wind Transducer, Standard Length: 14 1/2" Includes 100ft. Cable.DST800 Nylon Thru hull A22154Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp forST60, ITC-5PACKAGE CONTAINS:1ea E70327 i70s Instrument1ea E70010 ITC-51ea A22154 DST800 Transducer1ea E22078 Standard Wind Transducer1ea A06031 Backbone Terminator1ea A06074 Inline Terminator1ea A06068 Backbone Cable 9M1ea A06049 Power Cable Specifications: Instrument Function: Multifunction Box Dimensions: 12"H x 12"W x 24"L WT: 12.3 lbs UPC: 723193854075 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

i40 Bidata DisplayCompact and feature-packed instruments, the i40 series instruments are smart choice for boaters looking high performance and great value.The i40 series is simple to operate thanks to the use of just three control buttons, i40 has extra-large digits and razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. These SeaTalk® compatible instruments offer full integration with Raymarine autopilots and navigation equipment. The ultra-sleek design of i40 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. All i40 Instruments come with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i40 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 0.4 watts for superior run-time and excellent green credentials. The i40 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i40 Bidata Instrument The Raymarine i40 Bidata offers all of the functionality of the Depth and Speed instruments combined in a single space-saving display. Like the other i40 Instruments, the Bidata is available as a complete system with depth and speed transducers or as a display-only solution for remote readout of depth and speed at another location.The i40 Bidata's depth capabilities include easy-to-read displays of current speed, maximum speed, average speed, distance log, trip log as well as water temperature. Bidata also offers depth-related alarms and adjustments including shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm, and depth offset controls. Its speed capabilities include displays of current speed, maximum speed, average speed, distance log, trip log as well as water temperature.i40 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. High contrast LCD displays with large digits for excellent visibility. Red backlighting for outstanding night-time visibility. Simple SeaTalk networking with other Raymarine instruments, autopilots and MFDs. Built-in transducer connections simplify installation. Small form factor saves space at the helm without sacrificing features. Specifications: Shape: Rectangular Screen Size: 3.7" Instrument Function: Multifunction Box Dimensions: 3"H x 7"W x 10"L WT: 1.8 lbs UPC: 723193730867 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SeaTalkng Backbone Extender for extending blue SeaTalkng Backbone Cables.

Read more less

Spur CableRaymarine 400MM elbow Spur Cable for SeaTalkng Specifications: Cable Length (Meters): 400mm Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 723193060421

Read more less

5M Cable for HALO Dome Radar/Nemesis™5M cable for HALO Dome Radar. Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 8"L WT: 1.2 lbs UPC: 9420024173893

Read more less