Service Kit for 50890 Series PumpThe Jabsco SK890 Waste Pump Service Kit is designed for rebuilding the Jabsco 50890 Single Diaphragm Design.Kit Includes: (1) Cover #7 (1) Diaphragm #8 (4) Hex Head Screws #10 (1) Recessed Pan Head Screw #12 (1) Washer #14 (2) Pump Joker Valves #16 (2) Pump Ports #17 WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Valve Kit VitonThe Jabsco's Valve Kit Viton is a check valve kit, Viton for a Jabsco diaphragm pump.

Read more less

Twist MK2 Shower Mixer - WhiteThe original, integrated handset, with easy wrist-twist temperature and flow control, featuring a flexible mark-resistant hose.Features: Mixer handset available in black and white options, with color-matched angled housing, and chrome straight housing options are available Lighter and more flexible mark-resistant hose for easier operation and stowage Easy to use – streamlined ergonomic design using high-quality UV-resistant ASA materials Easily retrofittable to existing Twist installations End cap creates a splash proof seal

Read more less

Sta-Plug Emergency PlugSta-Plug™ is Forespar’s new form fitting emergency plug.  A soft cone shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull.  Unique edge gripping riblets help hold the plug in a hole, keeping water out.  The riblets help Sta-Plug™ conform to the shape of the hole, sealing a leak near the edge where a tight fit is crucial, and holding the plug more securely in place. Different by design, Sta-Plug’s™ shape includes a series of concentrically larger riblets stepped along the length of the cone.  These riblets offer two big advantages over traditional straight edged emergency plugs: They help Sta-Plug™ conform to the hole near the edge where a tight fit is most crucial They help hold it more securely in place Twist and compress by hand to insert into hole Expands after insertion to hold in place Intended for temporary emergency use with continuous monitoring only, it gives the skipper greater peace-of-mind to allow them to focus on getting the boat to safety.Made from high density foam, Sta-Plug™ will remain soft and ready to go for years and will not mold or swell up like conventional wood plugs. Can be cut with a knife to use in irregular shaped holes, or torn by hand near the riblets to make smaller diameter plugs for smaller holes   Tearing at the 8th riblet creates a plug with a 2” diameter base Made from high density foam that is not susceptible to mold or swelling Bright orange color allows it to be quickly located in an emergency Dimensions: 9” High x 5” Diameter at base Made right here in the USA Not for Fuel Leaks

Read more less

Thermostat for Nautic BoilersReplacement thermostat for Quick brands of water heaters.Features: 15 Amps 270mm

Read more less

Mounting Bracket for Series 970 Portable Toilets Stainless Steel hold-down brackets/fasteners for Series 970 portable toilets.  Secures toilet to the floor.Mounting screws not included.*Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 7"W x 8"L WT: 0.3 lbs UPC: 713814067885

Read more less

Water Valve Kit for Push Pedal Toilet Replacement water valve and fasteners for most SeaLand, Traveler, VacuFlush and Dometic™ pedal-flush toilets.*Does not replace water valve on 300, 310, 320 series Dometic™ toilets.In the Box: Water Valve Assembly Mounting Screws *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 3"W x 5"L WT: 0.24 lbs UPC: 087735102483

Read more less

Piston Rod Assembly with O-RingRaritan's Piston Rod Assembly includes the O-Ring and is made specifically for Raritan's PHII and PHEII.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 7"L WT: 0.47 lbs UPC: 085462000423

Read more less

Service Kit F4B-8 -9Johnson Pump Service Kit specifically for F4B-8 and F4B-9.

Read more less

Chrome Euro Sprayer with 6' Black Nylon HoseEuro ELBOW Sprayers are equally versatile, but with a modern look. The included countertop holder leaves the sprayer in a ready-for-action position. Available in a variety of hose materials and lengths. Sprayer handle features a trigger sprayer for on/off control or a flip-up lock for continuous water flow.Specifications: Water Connection: 1/2” NPS-F fitting Material: ABS sprayer with nylon or chrome-plated brass hose Mounting Hole: 1-1/16” Shipping Weight: 4 lbs.

Read more less

Replacement Pull-Out ABS HandleReplacement pull-out sprayer handle. Features an adjustable spray pattern, faucet flow, or shower spray.

Read more less

Flexible Adaptor 1-1/2" F to 3/4"1-1/4" F to 3/4" - 1" Hose Barb

Read more less

Chrome Folding Spout MixerCompact folding mixer with a high-reach spout. Features: Chrome finish Spout is about 5.75 in. tall Can 90 degrees one way or the other.  Specifications: Water Connection: 3/8 in. BSP-M threaded shafts, (1/2 in. NPS-M adapters included) Material: Chrome-plated brass Mounting Hole: 2 each 5/8 in., 2-5/16 in. center to center Shipping Weight: 3 lbs. *The "P" within the part number indicates retail packaging

Read more less

Heavy-Duty Basin Mixer - Chrome PlatedThis heavy-duty basin mixer is chrome-plated brass and has quarter turn ceramic valves.Specifications: Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings Material: Chrome-plated brass Mounting Hole: 1-1/4 in. Shipping Weight: 5 lbs. *The "P" within the part number indicates retail packaging

Read more less

Straight Handle Pull Out Sprayer - White with 6' HoseThis straight-handled sprayer is as reliable as it is functional.Features: White sprayer with 6 ft. white nylon hose Included counter-top holder leaves the sprayer in a ready-for-action position Sprayer handle features a trigger sprayer for on/off control or a flip-up lock for continuous water flow Specifications: Water Connection: 3/8 in. BSP-F fitting Material: Glass reinforced plastic sprayer with nylon or chrome plated brass hose Mounting Hole: 1-1/16 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

White Container & Cap for Scandvik Part Numbers 10055,10275,10298, & 10826This is a replacement cap and cup for horizontally mounted recessed showers. Horizontally mounted showers can be distinguished by the shower on the cap. This specific model is a kit (one #10252 cap and one #10253 cup).Note: Pull-out shower/sprayer handle uses cups #10253 (white) or #10264 (black) and a white cap #10252 or a black cap #10263 Mixer valves use the white cup #10335 and the same white cap, #10252 *The "P" within the part number indicates retail packaging

Read more less

Stainless Steel Sink Basin - 9" x 4" - Brushed FinishThis is the smallest Scandvik basin sink. Same great quality as the mirror finished version. Specifications:Material: 18/10 Stainless Steel (brushed finish) Flange Profile: B Flange Width: 5/8 in. Depth: 4 in. Drain Opening: 2-1/16 in. Shipping Weight: 4 lbs.

Read more less

Recessed Shower with 6' White Hose - Push-ButtonThis part is part of the fifth generation of Scandvik recessed showers. Also, this recessed shower has an easy-to-use push-button.Features: White handle, cup, and cap with a 6 ft. white hose Improved UV protection and a better water seal when the cap is closed Built-in grab ring for easy deployment Mounts vertically or horizontally Mounting hardware is included Specifications: Water connection: 3/8 in. BSP-F threaded fitting Material: ABS and chrome-plated brass (push-button) Mounting Hole: 2-3/4 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

electro scan® Treatment System - 12vThe simple and basic operation of this system is as follows: the system needs salt water in order to operate properly and salt can be added when not in full seawater conditions. When the system is activated the electrical charge applied to the patented plates generates the disinfectant to kill viruses and bacteria. As that disinfectant is generated the high speed macerator breaks apart the waste allowing greater contact between waste and disinfectant.  If your toilet uses freshwater we recommend considering the Purasan.The Electroscan is a flow through device so once the toilet is flushed it pushes out previously treated waste and begins treating the flush that has just entered the first macerating chamber.Features: Most popular USGC certified Type 1 MSD (Marine Sanitation Device) Power requirements have been reduced by 36% - each cycle uses only 1.2 amp hours of power Generates its own natural disinfectant from salt water Coated electrodes use salt water to kill bacteria and viruses without using harmful chemicals Records each treatment cycle and stores key information in non-volative memory that can be summarized on the LCD display or downloaded to a PC Single button operation is possible Requires sea water salinity or salt feed tank Benefits: Can be used with both manual and electric toilets Treats each flush as waste is generated Discharges with treatment levels that are safe for environmentally sensitive areas Easy installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Holding Tank Treatment Box Dimensions: 11"H x 17"W x 18"L WT: 23 lbs UPC: 085462018688 Owner's Manual (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 6.30"-6.74" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 6.30" to 6.74"

Read more less

Lower Housing Replacement Kit - 3.0 CAMIncludes diaphram and drive assemblyFor the Following Pumps: Silencer - 12VDC Premium - 12VDC Standard Blaster™ - 12VDC Standard Blaster™ - 24VDC ProBlaster™ - 12VDC Pro Baitmaster™ - 12VDC Pro Baitmaster™ - 24VDC This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Service Kits Box Dimensions: 2"H x 7"W x 9"L WT: 0.7 lbs UPC: 752324001200

Read more less

316 Stainless Steel T-Bolt Clamp 3/4" Band - Range 8.25" to 8.69"Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation. These clamps can be used on any hose connection with peace of mind that they will last you a very long time. These clamps are sold in 2 configurations; part numbers ending in “L” signify that a long T-Bolt is being used and is for our Rubber Hose products. The part number without the “L” is for our Silicone and PVC products. 3-Year Warranty. Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 1-7/8" to 2" Hose Outer Diameter (inch): 2.28" to 2.59" Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 11/32"-25/32" Clamping Range - 10-Pack - SAE Size 6Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 6 Hose Inner Diameter: (inch) 5/16" - 3/8" Clamping Range: (inch) 11/32" – 25/32" / (mm) 13-20 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

SmartStart III Single Phase Soft Starter for 115V GT10/GT16 Marine Air ConditionerReduces boat air conditioning startup spikes.Features: Water-resistant Prevents voltage spikes when starting, helps prevent power outages Problem-free air conditioner start-up at moorings with low-quality electrical circuit protection Reduces startup amps by up to 65% Brochure (pdf)

Read more less

Service Kit Waste Tank Replacement Lid with Sensor - GreyThe Grey Waste Tank enables the user to manage all grey waste onboard easily, through one skin fitting. The Intelligent Control sensor integrated into the tank lid provides automatic operation of the grey waste pump. The sensor will detect water in the grey waste tank at a pre-determined level, and will automatically activate the grey waste pump. When the tank is emptied, the switch will automatically turn the grey waste pump off. The 2 sensor models include a second sensor that can be used to control a second grey waste pump. It is factory set to activate at a higher water level and will provide additional pumping capacity during periods of high inflow to the grey waste tank. Alternatively, the second sensor can be wired to a high-level alarm, warning of a high water level within the grey waste tank. Brochure (pdf)

Read more less

Raw Water System Eco Kit with Rocker Switch, Wire Harness & Fitting12V Raw Water Flush Kit is specifically designed for EasyFit, Nano, and Compass Eco Toilet models. This kit is essential for vessels that already have a pressurized raw water system onboard, providing an efficient raw water flushing solution without the need for a pump (if a pump is needed, refer to Thetford part number T-PF.P27 for 12V applications and T-PF.P28 for 24V applications). It's a perfect choice for those who wish to conserve fresh water on their boat.Features: Compatible with EasyFit, Nano, and Compass eco toilets Includes wall-mounted flush control switch Included 12' wire harness This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Multiframe SFT 2-Button Control PanelThe control panel that gives the possibility of mounting any bezel on the market, the chameleon of the control panels.Compatible with all commercial bezels.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 5"H x 6"W x 6"L WT: 1.95 lbs UPC: 850080338698

Read more less

Halo LPG Cylinder Foot Ring CoverThe Mopeka Halo is a thermoplastic rubber foot ring for standard cylinders. Designed for 20, 30, or 40 lbs USA Cylinders. Protects your car, RV tray, and floor surfaces from the rust and grime that builds up on cylinders. Halo also provides the benefit of creating space and improving wireless range when used with a sensor. Specifications: Type: Parts Box Dimensions: 1"H x 8"W x 9"L WT: 0.3 lbs

Read more less

Treatment System Relay Box - 12V-38XXX SeriesThis black treatment system relay box is part of Jabsco’s Waste Management System, 12V-38XXX Series.Features:Relay Box Color: Black

Read more less

Sonic Grease Single Use Packet *4-PackMopeka Sonic Grease is applied to the sensor face to improve ultrasonic performance. This is a 4-pack of 1cc single-use units.Note: All sensors are shipped with 1 grease pack. Order this package for use when sensors must be removed from the tank frequently, or when grease has otherwise been removed from the sensor. Specifications: Type: Parts Box Dimensions: 0"H x 3"W x 4"L WT: 0.01 lbs

Read more less

PUREWATER+All-In-One Water Filtration System 5 Micron Replacement Filters - 2-PackFeatures: Simple filter change by twisting off faucet head simply dropping filter into cartridge without crawling under sink On-demand ultra-clean tasting water from your tank Elegantly styled Simple to install Compact filter housing maximizes under sink storage

Read more less

Check Valve - 3/4"Features:Size: 3/4"Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 5"W x 5"L WT: 0.1 lbs UPC: 085462045066

Read more less

Crown Head™ CD Series Repair KitThe Deep Draft Crown Head was last made in 1990 but some still exist out in the field today. While many of the parts are similar to today’s Crown Head there are some that are no longer available. For this reason we now include the macerator retro-fit for the old Deep Draft units to make the Centrifugal Discharge series.This repair kit will update the older style Deep Draft toilets to the new CD series. For those not wishing to tear apart units Raritan still offers a Crown Head Exchange program that allows users to swap their old base for a new one at a reduced cost over buying new.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 3"H x 4"W x 6"L WT: 0.4 lbs UPC: 085462007033

Read more less

MF 842 Vented Loop - 3/4"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 3/4" (19.05mm) Height: 4-1/2" (114.3mm) Width: 3-3/4"" (95.25mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 4"W x 5"L WT: 0.1 lbs UPC: 028026148728

Read more less

MF 843 Vented Loop - 5/8"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 5/8" (15.87mm) Height: 4-1/2" (114.3mm) Width: 4" (101.6mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 5"W x 5"L WT: 0.15 lbs UPC: 028026148742

Read more less

MF 840 Vented Loop - 1-1/2"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/2" (38.1mm) Height: 5-1/4" (133.35mm) Width: 7-3/4" (196.85mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 6"W x 8"L WT: 0.45 lbs UPC: 028026148711

Read more less

Hold Down Kit for 550P & Campa XTThetford hold-down kit is produced for 550P and Campa XT models.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Cam 3 Cam & Bearing KitThe Jabsco 18913-0003 is a cam/bearing kit for a Jabsco diaphragm pump.

Read more less

Holding Tank Vent FilterDometic™ goes that extra mile so that you don't have to and reducing the use of chemicals is always our aim, especially in a marine environment.  The Dometic™ DVF vent filter ensures just that and is designed to absorb odors from a holding tank vent and keep the surrounding air clean and pleasant.  The vent filter eliminates the need for any holding tank chemicals since it is manufactured with superbly effective odor-absorbing filter material. Adapters for different vent hose sizes are included in the kit.Features: No chemicals needed Absorbs odors Environmental awareness Brochure (pdf)

Read more less

SmartStart III Single Phase Soft Starter for 115V GT6 Marine Air ConditionerReduces boat air conditioning startup spikes.Features: Water-resistant Prevents voltage spikes when starting, helps prevent power outages Problem-free air conditioner start-up at moorings with low-quality electrical circuit protection Reduces startup amps by up to 65% Brochure (pdf)

Read more less

Touch SFT 2-Button Control PanelTouch control panel made of hi-tech glass and LED backlighting with a proximity sensor. Design and high technology combined with respect for the budget.Ultimate touch control panel made of hi-tech tempered glass and LED back lighting with Smart Flush Technology: mooring and sailing mode, water amount trim, overfill protection, and tank monitoring.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 5"H x 6"W x 6"L WT: 2.15 lbs UPC: 850080338728

Read more less

Pressure Switch for Parmax Water Pumps 25 PSIThe pressure switch service kit provides a multi-voltage (12V and 24V) 25 PSI pressure switch solution for compatible Jabsco Par-Max freshwater delivery pumps. Supplied as an installation-ready kit, it includes a switch assembly, wire leads, a switch diaphragm, heat shrink butt connectors, and screws, making it a practical replacement package for maintaining consistent pump pressure control.

Read more less

Motor Group 12V for Silent Electric ToiletsJohnson Pump's 12V motor group (silent electric).

Read more less

Seat Lid & Seat for 960 Series Portable Toilet - ParchmentReplacement seat and lid for 960 Series toilets.Features:Color - Parchment*Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 2"H x 15"W x 16"L WT: 1.82 lbs UPC: 713814067632

Read more less

Upper Assembly Replacement for 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 Washdown PumpsThis Shurflo upper assembly replacement is for the 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 washdown pumps listed below: Shurflo Pro Blaster II Deluxe 4.0 (4248-153-A09 [4248-153-E09]) Shurflo Pro Blaster II Deluxe 4.0 24 VDC (4248-163-A09 [4248-163-E09]) Shurflo Pro Blaster II Ultimate 5.0 (4258-153-A09 [4258-153-E09]) Shurflo Pro Blaster II Ultimate 5.0 24 VDC (4258-163-A09 [4258-163-E09]) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Stainless Steel Constant Torque Clamp 5/8" Band, Hose I.D. - 4", Hose O.D. - 4.25" TO 5.125"Virtually all rubber hose compresses (cold flow) after installation of a clamping device, resulting in an almost immediate torque loss that can exceed 80% of installation torque. Similarly, virtually all metal connections expand as a system heats up, and then contract as the system cools. Conventional worm gear, T-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for without re-tightening or loosening the clamps. This clamping system is an “active” clamping mechanism, which monitors and then compensates for the changes by actually changing diameter through a unique worm gear Belleville assembly.Specifications:  Recommended max. torque - smaller ID. Sizes up to 730-3000: 30 to 70 in.-lbs, larger ID. Sizes above 730-3000: 50 to 120 in.-lbs. Hose I.D. - 4", Hose O.D. - 4.25" TO 5.125" Construction: Band & Housing: 304 Stainless Steel 5/8” Wide Band Bellville Spring Washers & Screw: 401 Stainless Steel

Read more less

Quick Connect Clips 6 GPM *PairThe clip set is a spare part designed to provide a secure, reliable attachment solution for selected Jabsco and Flojet pump models. Made with durable materials, it supports dependable installation and serviceability in pump systems where a correct-fitting clip is required.Compatibility: Jabsco PAR-MAXplus 82600 Jabsco PAR-MAXplus 82605 Jabsco PAR-MAXplus 82906 Flojet VersiJet R8600XXX Flojet VersiJet R8600-XXX Alternative to Flojet 20408700

Read more less