Gulper Grouper Fishbox Evacuation Pump 24VNon clog no filter waste pumps built on more than a decade of market leading pump technology.Replace your macerator with the ultimate fishbox waste pump - Gulper Grouper - the non choke fishbox waste box suits standard 1"/ 1 1/2" hose connectionsFeatures You can depend on diaphragm pump technology : No impeller to clog or burn Non-choke valves - easily handle fishbox waste Save money - Single pump for multiple wells Easy to install - 360 degree head rotation and choice of 1" or 1 1/2" hose connections to suit your installaton needs Easy to maintain and clean Ideal replacement for macerator pumps Fast pump out - up to 6.75 US gals/ 25.5 ltrs per minute Long term durability - runs dry without damage Fit in convenient locations - Multi-directional head position Save battery - Low power consumption WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Minute: 6.75 GPM Inlet Size: 1" or 1-1/2" Outlet Size: 1" or 1-1/2" Suction Lift (ft.): 1.7' Volts: 24v Box Dimensions: 7"H x 8"W x 12"L WT: 5.35 lbs UPC: 766478942401

Read more less

Stainless Steel Debris StrainerExtra measure of protection for use on round based Rule pumps up to 3700 GPH (14010 LPH). Installs directly into existing strainer. Filters out excess debris and helps prevent jamming and failure.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 1"H x 3"W x 6"L WT: 0.05 lbs UPC: 042237084293

Read more less

1-1/2" x 50' Box White Bilge HoseExtremely flexible corrugated polyethylene hose for bilge intake and discharge. Cuffed every foot for clamping. Resists oily bilge and seawater. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. Operating temperatures -40° to +200° F (-40° to +93°C).Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: White Packaging: Bulk Box: 1000' (305m) to 150' (46m), Boxed: 100' (30.5m) & 50' (15m) Specifications: ID Diameter (inches): 1-1/2" Length (Feet): 50 Box Dimensions: 10"H x 22"W x 23"L WT: 5.8 lbs UPC: 704917005270

Read more less

1" x 50' Box Black HD Water Hose 200 PSICost-effective, Hi Temp, EPDM rubber, polyester reinforced, and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat, and serve a variety of boat and plant pressurized applications (water & air delivery) #132 is 2 spiral, 200PSI (1.38MPa) W.P. Operating Temp. -40°F to 212°F (-40°C to 100°C).Specifications: Sizes: 1/4" to 1-1/2", 6.3mm to 25mm Colors: Black Packaging: Reels 750’-250’ (230-75m), Boxed 50’ (15m) Specifications: ID Diameter (inches): 1" Length (Feet): 50 Box Dimensions: 5"H x 22"W x 23"L WT: 22.1 lbs UPC: 704917005768

Read more less

1" x 50' Box Bilge & Live Well Hose Clear with Black HelixHeavy-duty bilge, drain, and live well hose. Clear vinyl (FDA) corrugated with black hard PVC helix and smooth tube. Provides exceptional flexibility and bend radius. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100' (30.5m) Coil, 50' (15m) Boxed Specifications: ID Diameter (inches): 1" Length (Feet): 50 Box Dimensions: 6"H x 22"W x 23"L WT: 9.2 lbs UPC: 704917017815

Read more less

5/8" x 50' Box VAC XHD Bilge & Live Well Hose Black - Soft Plasticizer Wall149-Black ”Extra Flexible”. Smooth extra heavy wall vinyl hose. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100’ (30.5m) Coil, 50’ (15m) Boxed Specifications: ID Diameter (inches): 5/8" Length (Feet): 50 Box Dimensions: 5"H x 18"W x 18"L WT: 8.3 lbs UPC: 704917010373

Read more less

1/4" x 50' Box Black HD Water Hose 200 PSICost-effective, Hi Temp, EPDM rubber, polyester reinforced, and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat, and serve a variety of boat and plant pressurized applications (water & air delivery) #132 is 2 spiral, 200PSI (1.38MPa) W.P. Operating Temp. -40°F to 212°F (-40°C to 100°C).Specifications: Sizes: 1/4" to 1-1/2", 6.3mm to 25mm Colors: Black Packaging: Reels 750’-250’ (230-75m), Boxed 50’ (15m) Specifications: ID Diameter (inches): 1/4" Length (Feet): 50 Box Dimensions: 3"H x 18"W x 18"L WT: 5.4 lbs UPC: 704917005645

Read more less

1" x 50' Box VAC XHD Bilge & Live Well Hose Black - Soft Plasticizer Wall149-Black ”Extra Flexible”. Smooth extra heavy wall vinyl hose. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100’ (30.5m) Coil, 50’ (15m) Boxed Specifications: ID Diameter (inches): 1" Length (Feet): 50 Box Dimensions: 6"H x 22"W x 23"L WT: 14.5 lbs UPC: 704917010410

Read more less

1-1/2" x 50' Box Bilge & Live Well Hose Clear with Black HelixHeavy-duty bilge, drain, and live well hose. Clear vinyl (FDA) corrugated with black hard PVC helix and smooth tube. Provides exceptional flexibility and bend radius. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100' (30.5m) Coil, 50' (15m) Boxed Specifications: ID Diameter (inches): 1-1/2" Length (Feet): 50 Box Dimensions: 10"H x 22"W x 23"L WT: 15.2 lbs UPC: 704917006079

Read more less

5/8" x 50' Box Bilge & Live Well Hose Clear with Black HelixHeavy-duty bilge, drain, and live well hose. Clear vinyl (FDA) corrugated with black hard PVC helix and smooth tube. Provides exceptional flexibility and bend radius. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100' (30.5m) Coil, 50' (15m) Boxed Specifications: ID Diameter (inches): 5/8" Length (Feet): 50 Box Dimensions: 5"H x 18"W x 18"L WT: 6.9 lbs UPC: 704917005997

Read more less

3/4" x 50' Box Black HD Water Hose 200 PSICost-effective, Hi Temp, EPDM rubber, polyester reinforced, and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat, and serve a variety of boat and plant pressurized applications (water & air delivery) #132 is 2 spiral, 200PSI (1.38MPa) W.P. Operating Temp. -40°F to 212°F (-40°C to 100°C).Specifications: Sizes: 1/4" to 1-1/2", 6.3mm to 25mm Colors: Black Packaging: Reels 750’-250’ (230-75m), Boxed 50’ (15m) Specifications: ID Diameter (inches): 3/4" Length (Feet): 50 Box Dimensions: 5"H x 18"W x 18"L WT: 15.8 lbs UPC: 704917005744

Read more less

3/8" x 50' Box Black HD Water Hose 200 PSICost-effective, Hi Temp, EPDM rubber, polyester reinforced, and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat, and serve a variety of boat and plant pressurized applications (water & air delivery) #132 is 2 spiral, 200PSI (1.38MPa) W.P. Operating Temp. -40°F to 212°F (-40°C to 100°C).Specifications: Sizes: 1/4" to 1-1/2", 6.3mm to 25mm Colors: Black Packaging: Reels 750’-250’ (230-75m), Boxed 50’ (15m) Specifications: ID Diameter (inches): 3/8" Length (Feet): 50 Box Dimensions: 3"H x 18"W x 18"L WT: 7.5 lbs UPC: 704917005683

Read more less

Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:12Dimensions: Diameter:3-3/4" Shaft Width:1" Shaft Diameter:3-9/16" Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12V Flush PumpA silent and robust flush pump to be used with any toilet with any 12V external flush system. Port connections inlet/ outlet 19mm (3/4").Specifications: Weight: 0.9kg/1lb Voltage: 12V Port connections inlet/ outlet 19mm (3/4") *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Read more less

Stainless Steel Replacement Screen f/APHS-2000 - Size 3 (.188") Perforation DiameterFeatures: Replacement Screen Stainless Steel Size 3 (.188") Perforation Diameter Specifications: Material: Stainless Steel Box Dimensions: 0"H x 4"W x 6"L WT: 0.1 lbs UPC: 742985128637

Read more less

1100 GPH Livewell Pump Angled Thru-Hull InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 1100 GPH Inlet Style: Angled Thru-Hull Inlet Size - NPT: 3/4" NPSM Thread Discharge Size - Hose Barb: 1-1/8" Voltage: 12VDC Amp Draw @ 12VDC: 4.7 AMP Fuse Size: 7.5 AMP Replacement Motor Cartridge PN: 67DR Quick Guide (pdf)

Read more less

Impeller KitMaterial:NeopreneDrive Type:Key DriveNumber of Blades:12Dimensions:Diameter:2-7/16"Shaft Width:5/8"Shaft Diameter:1-1/4Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Perko 8" x 5-1/8" Scoop Strainer BronzeCast bronzeMachine slotsTechnical Information: For Thru-Hull Size Inches: 3/8 & 1/2 Dimensions Strainer Inches: 3-1/2 X 2-1/2 Model Number: 0066DP1PLB Ship Weight: 2.0/1.8 lbs. Screw Size: #8 Specifications: Material: Bronze Box Dimensions: 2"H x 6"W x 8"L WT: 1.7 lbs UPC: 085226337413

Read more less

4-Zone Dry Bilge System Add-OnThe 4-Zone Splitter is the perfect companion to the Dry Bilge System, enabling powerful suction from up to four separate zones to keep your bilge dry and clean. Designed for ease of use and durability, this splitter is ideal for marine and yacht applications, ensuring efficient water removal to prevent mold, mildew, odors, and hull damage. Its quick-connect fittings allow for simple and seamless installation, while the ignition-protected design ensures safe use in marine environments.With its high-impact, durable plastic housing and precise engineering, the 4-Zone Splitter is a long-lasting addition to your dry bilge system. Note that this splitter must be paired with the Dry Bilge System (CM-33-DBS) to operate effectively.CAUTION: This product is designed as a supplemental low-flow system and is not a replacement for conventional bilge pumps. It should never be relied upon to maintain vessel flotation.Features: 4-Zone Suction Capability: The splitter connects your COMMODORE Dry Bilge System to up to four separate zones, ensuring comprehensive water removal and a cleaner, drier bilge. Quick-Connect Fittings for Easy Installation: Designed with quick-connect fittings, the splitter makes plumbing connections seamless and efficient, saving you time during setup. High-Impact Durable Plastic Housing: Built to withstand harsh marine environments, the housing ensures durability and long-lasting performance. Prevents Mold, Mildew, and Odors: Keeps your bilge dry to prevent the growth of mold and mildew while eliminating musty odors and protecting hull integrity. Compact Design for Tight Spaces: Its lightweight and compact form allows for flexible installation in limited spaces on marine vessels and yachts. Safe for Marine Environments: The splitter is ignition-protected to meet ISO 8846 Marine standards, ensuring safe use in engine compartments and other critical areas. Works Exclusively with Commodore Dry Bilge Systems: Specifically engineered to integrate seamlessly with the CM-33-DBS for optimal performance and reliability. Specifications:Weight: 1.00 lbs Specifications: Gallons Per Minute: 3 Volts: 12 Box Dimensions: 8"H x 9"W x 12"L WT: 8.3 lbs UPC: 817683023215

Read more less

Dry Bilge System 3.0 GPMKeeps your bilge bone-dry!Features: Equipped with built-in programmable timer for automatic usage Removes all still water from the bilge Simple installation Keeps your bilge clean and dry Preserves hull integrity Helps prevent mold, mildew, mustiness, odors, and rot 25' self-priming suction allows the system to be remotely mounted User programmable timer allows the user to activate the system as much, or as little, as needed  A thin 8mm suction hose allows for easy bends and fits into tight spaces An Automatic-Off-Manual toggle switch allows the user to activate the system manually in addition to automatically Quick-connect fittings allow for simple plumbing installation High absorption suction base ensures a dry bilge Ignition Protected - ISO 8846 Marine/SAE J1171 Marine Can suction up to 4-zones with a multi-zone splitter (sold separately) Specifications: Gallons Per Minute: 3 Operation: Automatic Volts: 12 Box Dimensions: 7"H x 8"W x 13"L WT: 8 lbs UPC: 817683023208

Read more less

800 GPH Livewell Pump Replacement Motor CartridgeThe innovative GPH Livewell Pumps feature removable motor cartridges, which are fast and convenient to replace.Features: 800 GPH Replacement Specifically for GPH Livewell Pumps Quick Guide (pdf)

Read more less

11811 - 6 Gallon Water Heater - 120VKuuma's Premium 6 Gallon Water Heater is perfect for a new installation or as a replacement to an existing water heater.   Constructed of corrosion-resistant, marine-quality aluminum and heats water with the use of an electrical power or integrated heat exchanger.Features: Ignition protected controls Mounting tabs Manual reset Technical Specifications: Capacity - 6 Gallon Electrical Input - 120V Orientation - Horizontal Mounting Brackets - Front and Rear Heating Source - Front heat exchange Maximum Water Temperature - 210°F T & P Valve Type - 100psi and 210° F Wiring Configuration - L1 and N Dimensions (W x H x D) - 13-3/4" x 13-5/8" x 19-3/4" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: Yes Volts: 120 Box Dimensions: 16"H x 17"W x 22"L WT: 21.7 lbs UPC: 014717118118 Owner's Manual (pdf)Brochure (pdf)

Read more less

Raw Water System Eco Kit with Rocker Switch, Wire Harness & Fitting12V Raw Water Flush Kit is specifically designed for EasyFit, Nano, and Compass Eco Toilet models. This kit is essential for vessels that already have a pressurized raw water system onboard, providing an efficient raw water flushing solution without the need for a pump (if a pump is needed, refer to Thetford part number T-PF.P27 for 12V applications and T-PF.P28 for 24V applications). It's a perfect choice for those who wish to conserve fresh water on their boat.Features: Compatible with EasyFit, Nano, and Compass eco toilets Includes wall-mounted flush control switch Included 12' wire harness This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

4-Blade Chopper Kit with Lock Nut for 18590 Series Macerator PumpsThe Jabsco 4-Blade Chopper Kit replaces a worn, broken, or malfunctioning macerator chopper in the 18590 Series. The chopper is designed with 4 heads, each with its own blade to break up large debris before it enters the pump and other fluid lines. Includes a lock nut to secure it in place.

Read more less

Raw Water Inlet Pump - 12VThetford's 12V raw water pump delivers 3.2 gallons of water per minute with the ability to supply 3-4 outlets.15mm quick-connect port fittings are suitable for 15mm rigid tubing systems. An included fine, 50 mesh inlet filter, with its own 15mm port, connects directly to the pump inlet. Also included are (2) WX1584 quick-connect fittings for 1/2" flexible hose, and (2) WX1587 1/2" BSP male threaded quick-connect fittings for threaded attachments.Features: Suitable for saltwater and freshwater systems Low power consumption Self-priming up to 3m (10 ft); max head 30m (98 ft) Cushioned, universal/adjustable mounting feet allow for easy retrofit to any existing pump location Will run dry without damage Internal pressure switch Splash proof This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Seal Kit for Quiet Flush ToiletsA replacement seal and retainer for Jabsco pumps and heads.

Read more less

Minimalistic Compact Single Level Mixer - Faucet & Shower Combo - ChromeThe minimalist single-lever design of the combination faucet and shower mixer combines modern lines with elegance. Press the button on the back of the handle to switch between aerated water flow and shower spray.Features: Inward-opening valve handle to prevent accidental opening in rough conditions while underway Cutting template included 5 ft. Nylon Braided Hose Specifications: Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings Material: Chrome -plated brass body with chrome ABS sprayer handle Mounting Hole: (2) 1-1/4 in. holes, 1-1/16 in. center to center.  Shipping Weight: 5 Lbs.

Read more less

Bilge Pump Heavy Duty 1750 GPH - 12VSubmersible heavy duty bilge pump 12V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. Features: Heavy Duty Submersible For pleasure or commercial boats above 10m (30Ft) length  Interchangeable with Rule 1500, Johnson Pump 16004-00 /32-1600-01 Specifications: Weight: 0.7 kg/1 lb Dimensions: 150/6L x 170/6.7H x 130/5W mm/in  Fuse: 6A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 1750 GPH Gallons Per Minute: 29 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 12v Box Dimensions: 6"H x 7"W x 8"L WT: 4.6 lbs UPC: 7340176600103

Read more less

Perko 1-1/2" Seacock Ball Valve BronzeThese valve bodies are offered to meet the needs of applications thatrequire extra long, scoop or flush type thru-hulls.Cast Bronze.Technical Information: Flange Diameter Inches: 5-1/2" Overall Height Inches: 4-1/2" Pipe Size Inches: 1-1/2" Model Number: 0805008PLB Ship Weight: 6.4 lbs. *Overall height is measured from the top of the hose adapter to the bottomof the flange. Specifications: Construction: Bronze Box Dimensions: 5"H x 8"W x 9"L WT: 6.75 lbs UPC: 085226238123 Quick Guide (pdf)

Read more less

ARG-500 Series 1/2" Raw Water Strainer with Stainless Steel BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D Specifications: Material: Stainless Steel Box Dimensions: 5"H x 5"W x 10"L WT: 4.15 lbs UPC: 742985060616

Read more less

Deluxe Flush 14" Straight Back 12V Freshwater Electric Marine Toilet with Solenoid Valve & Soft Close LidYou can experience all the comforts of home at sea with Jabsco Deluxe Flush electric marine toilet. Designed for the discerning owner looking for luxury and comfort, the Deluxe Flush portfolio features a space-saving, stylish design with minimal water usage and virtually silent operation.Features: 14" Straight back Space-saving stylish design Household size soft closing seat Virtually silent operation Fresh water rinse model Powerful non-clogging large bore flush pump macerates waste Specifications: Bowl Size: Domestic Lid: Soft close Rinse Type: Freshwater Rinse Pump/Solenoid Valve: Solenoid valve Voltage DC: 12V DC Recommended fuse Size (AMP): 25 Flush control Switch: 4-Button Touch Panel Height: (inch) 14.4” / (mm) 366 Width: (inch) 14.8” / (mm) 375 Depth: (inch) 17.7" / (mm) 450 Weight: (LBS) 55.1" / (kg) 25 One-Touch Control Pad:All Deluxe Flush marine toilets come complete with a multi-function, one-touch control pad. The control pad is supplied with a standard surface mount unit with a clean white bezel. The control pad offers four options: fill, quick flush, flush, or empty. In addition, the owner can set the control at any time so that the bowl is always left either dry or wet after flushing. The recommended dry setting minimizes total water usage. If water usage is not a concern, the wet setting automatically fills the bowl after flushing, ready for the next user. Simultaneously holding down both the quick flush and flush buttons for 5 seconds switches between bowl always left dry and bowled always left wet modes.Control Pad Options: Fill may be touched when the bowl is dry add 1 quart (1 liter) of water before use, if necessary Quick Flush first rinses and then empties the bowl after light use. On the dry setting, this uses less than 1 quart (1 liter) of water Flush rinses and empties the bowl twice after heavy use. If the bowl is dry, touching the fill before use is recommended. This uses just 2.5 quarts (2.5 liters) of water Empty does exactly what it says without adding any water, whenever desired. Even when the bowl appears to be dry, there is an anti-odor water lock in the pump housing Rinse Options: Supplied with a solenoid valve assembly for connection to any existing pressurized water system capable of delivering 2.9 GPM (11 LPM) or more The solenoid valve features dual non-return valves to protect the freshwater system from possible black flow from the toilet into the water system Specifications: Color: White Gallons Per Minute: 2.9 Operation Method: Electric Rinse Water: Fresh Volts: 12 Box Dimensions: 20"H x 23"W x 25"L WT: 62.6 lbs UPC: 671880638692 Owner's Manual (pdf)

Read more less

Straight Discharge AdapterRaritan's Straight Discharge Adapter is for 90° to Straight.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 4"L WT: 0.21 lbs UPC: 085462000560

Read more less

3/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 3/4" / (mm) 20 Outer Diameter: (inch) 1.15" / (mm) 29 Working Pressure: (Psi) 100 / (bar) 6.9 Bend Radius: (inch) 1" / (mm) 25 Weight: (Lb./50ft.) 23 / (Kg/m) 10.3 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 3/4" Length (Feet): Sold By The Foot Box Dimensions: 2"H x 2"W x 12"L WT: 0.44 lbs Quick Guide (pdf)

Read more less

Gusher Titan Manual Bilge Pump Thru Deck/BulkheadGusher Titan is Whale's tough lightweight proven pump. A design that has been tried tested and trusted by sailors for decades.Whale's high performance lightweight model.Features High flow rate: 105 ltrs (28 US gals) per minute Clamp ring easily removed for pump head rotation Tough yet lightweight proven design 2 mounting options - bulkhead and thru deck models Quick maintenance - Clamp ring easily removed for pump head rotation Typical Uses: bilge pump out, Holding tank pump out, Toilet flush Ease of operation - Self priming and spring assisted outlet valve Straight forward installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1680 GPH Gallons Per Minute: 28 GPM Type: Manual Box Dimensions: 8"H x 9"W x 12"L WT: 5 lbs UPC: 766478441003

Read more less

ECO-SwitchThe Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no moving internal parts, all wiring is out of the water, and there are no submerged electrical connections at all. Offering complete reliability and outstanding performance, the Rule ECO-Switch offers a viable alternative to traditional float switches.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Type: Switches Box Dimensions: 4"H x 6"W x 10"L WT: 0.6 lbs UPC: 042237085184 Owner's Manual (pdf)

Read more less

1-1/2" Ocean-Flex Multipurpose Hose - Sold by the FootThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.Provides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.Specifications: Construction: Tube Black Nitrile, Cover Black Nitrile Reinforcement: Multiple Textile Spirals, Dual Steel Wire Helix Temperature Range: -20°F to 212°F (-29ºC to 100ºC) Lengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1/2” ID.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/2" Length (Feet): Sold By The Foot Box Dimensions: 2"H x 2"W x 12"L WT: 0.5 lbs Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.30"-8.87" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 8.30" to 8.87"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 4.28"-4.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 4.28" to 4.59"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 3.78"-4.09" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 3.78" to 4.09"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 2.78"-3.09" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 2-3/8" to 2-1/2" Hose Outer Diameter (inch): 2.78" to 3.09" Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.62"-9.19" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: long T-Bolt is being used and is recommended for rubber hose products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band Long T-Bolt & Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 8.62" - 9.19"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.30"-8.87" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 8.30" - 8.87"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 6.53"-7.10" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: long T-Bolt is being used and is recommended for rubber hose products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band Long T-Bolt & Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 6.53" - 7.10"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 6.30"-6.74" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 6.30" - 6.74"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 5.37"-5.94" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: long T-Bolt is being used and is recommended for rubber hose products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band Long T-Bolt & Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 5.37" - 5.94"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 5.28"-5.59" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: For our Silicone and PVC products Can be used on any hose connection with a piece of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 5.28" - 5.59"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 4.37"-4.94" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: long T-Bolt is being used and is recommended for rubber hose products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band Long T-Bolt & Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 4.37" - 4.94"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 4.28"-4.59" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 4.28" - 4.59"

Read more less