MF 839 Vented Loop - 1-1/4"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/4" (28.57mm) Height: 7" (177.8mm) Width: 9" (228.6mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 7"W x 9"L WT: 1 lbs UPC: 028026190703

Read more less

VersiJet 4 Chamber Diaphragm Pump - 24V, 3.5 GPM, 50 PSIFlojet VersiJet Series industrial diaphragm pump. It is engineered for durability and longevity. This Flojet pump is perfect for applications such as liquid transfer, spraying, cooling, circulation, filtration, dispensing, and more! Glass-filled polypropylene hose is resistant to corrosion. Viton seals and a Santoprene diaphragm provide resistance to chemicals and corrosion. It has quick-connect ports and includes two 1/2" straight hose barbs.Features: Heavy-duty, coated motor Long-life co-molded diaphragm Efficient, quiet operation Self-priming Runs dry without damage 4-chamber diaphragm Quick-connect ports TENV permanent magnet motor Noise-dampening baseplate Thermal motor protection (TCO) Applications: Liquid Transfer Spraying Cooling Circulation Filtration Dispensing Specifications: Product Number: Q352F-16N7-2P Port Fittings: 2 x 1/2" (13mm) straight hose barb Open Flow Rate: 3.5 GPM open flow (13.2 LPM) Pressure Switch Cut-Off: No switch Max Operating Pressure: 50 PSI (3.4 BAR) Max Inlet Pressure: 30 PSI (2.2 BAR) Internal Bypass: Yes Fluid Temperature Range: 32° F - 140° F (0° C - 60° C) Self-Priming Capability: Up to 8ft (2.4m) dry prime Run-Dry Capable: Yes Nominal Voltage: 24 VAC Max Current Draw: 5.3 Amps @ 50 PSI (3.4 BAR) Fuse Size: 7 Amps (not included) Duty Cycle: Intermittent Leads: 12" (305mm), 14 AWG (2.5mm^2) Wire Connection: Stripped wire Weight (pump only): 5.1 lbs. Materials: Upper Housing: Glass-filled polypropylene Lower Housing: Cast aluminum Check Valve Retainer: Polypropylene Diaphragm: Santoprene Check Valves: Viton Switch diaphragm: Viton Bypass Diaphragm: Viton PH Seals: Viton PH Fasteners: Stainless steel Baseplate: Nylon with Rubber Feet Motor Casing: Cast aluminum; coated steel

Read more less

Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter x 2-1/2" W, 1" Shaft DiamterFeatures: Material: Nitrile Drive Type: Single Flat Drive Number of Blades: 9 Dimensions: Diameter:3-3/4", Shaft Diameter:1", Shaft Width:2-1/2" Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Compass Touch Toilet - High, White - 12VThe narrow footprint and smart back of the Compass toilet give maximum space and maximum flexibility wherever it is installed on board. It can go straight to a wall or even further towards the hull thanks to the cutaway. The Compass is not limited by a vertical back. This way, the visual installation remains perfect with whatever installation space you have. The small footprint and the hose design facilitate a very easy installation. The discharge pipes can easily be connected either below the step or surface-mounted in all directions. By having both a high and a short profile, the Compass range offers maximum flexibility on board.The performance of the macerator pump meets all quality standards, while the technology inside the toilet has been further developed to keep the sound emission to the lowest level possible, while limiting the water and electrical consumption to minimal levels. The installation, plumbing, and wiring are easy and fast, with virtually no maintenance.Both the Compass High and Short versions are equipped with an innovative soft closing system. A gentle finger touch to the lid activates the soft-close damper mechanism, which controls the closing speed of the cover. In addition to user convenience, a slow-closing lid keeps noise to a minimum and prevents potential damage to the toilet seat.The soft-close damper mechanism is a design original to Tecma.Features: Italian ceramic Wide range of control panels (Touch SFT panel included, others sold separately) Silent flush Low consumption Technical Specifications: Weight - 47.4 lbs Water Usage - 0.5-2L/0.1-0.5 gal per flush Color - White Seat and Cover - Thermosetting with soft closing Outlet Pump - MAC 4 12/24V Inlet Device - Solenoid This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Inlet Size: 1/2" Operation Method: Electric Outlet Size: 1/4" Rinse Water: Fresh Size: Compact Size Suction Lift (ft.): 13' Type: Toilet Volts: 12v Box Dimensions: 19"H x 24"W x 25"L WT: 56.3 lbs UPC: 028985983064

Read more less

 Talulah High Flow Ballast Pump Impeller KitFor the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced. A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Read more less

Aqua Jet Wash Down PumpsThe new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.CE-ApprovedFeatures: Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Inline strainer and trigger nozzle included as standard Long service life Capacity:20 l/min - 5.2 GPM Pressure Cut Off: 5 bar - 70 psi Fuse Size: 20 A Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb, Motor: WD 5.2 - 185 W, 12/24V DC Body: PA/PPA Valves: Nitrile Diaphragm: Santoprene Specifications: Gallons Per Minute: 5.2 GPM Max PSI: 70 Volts: 12v Box Dimensions: 6"H x 7"W x 11"L WT: 7.3 lbs UPC: 729321406079 Owner's Manual (pdf)

Read more less

304 Stainless Steel Strainer Basket Only Size 8 for 1-1/2" StrainerFeatures: Perko 049300899D 304 Stainless Steel Strainer Basket For #8 (1-1/2"-npt) Basket Measures 3-5/16"-dia. X 8-7/16"-high

Read more less

0543 Vented Fill f/1-1/2" Hose - Straight Neck - Gas - BlackBlack Polymer Cap with Black Polymer Body Black Polymer Strap Integral Tank Vent with Flame Arrestor and Anti Surge Valve Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-5/8" Neck Length: 2-7/16" Mounting Hole Dia.: 2-1/8" Screw Size: #8

Read more less

Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1700 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs UPC: 022697437044 Quick Guide (pdf)Brochure (pdf)

Read more less

Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs UPC: 022697476043 Quick Guide (pdf)Brochure (pdf)

Read more less

Perko 1-1/8" Thru-Hull Connection f/ use with Hose Chrome Plated BronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versons Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumRegular Length - Chrome Plated Bronze Technical Information: Hose Size Inches: 1-1/8 Mounting Hole Diameter Inches: 1-5/16 Maximum Hull Thickness Inches: 1-3/4 O.D. Flange Inches: 2-1/4 Model Number: 035006ADPC Ship Weight: 4.6/8.9 lbs. Made in the USA Specifications: Hose Size: 1-1/8" Material: Bronze Box Dimensions: 3"H x 3"W x 5"L WT: 0.9 lbs UPC: 085226036118

Read more less

Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions:Diameter:2-1/4"Shaft Width:5/8"Shaft Diameter:2Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Diverter Y Valve with FittingsRaritan’s Diverter Y-Valve allows for easy installation as it can be configured using any port as input. Port connections are National Pipe Thread allowing the use of the many stock fittings available in local marine and hardware stores.The flexibility of configuring each port with a different fitting allows the installer to easily connect to hoses without having to run new lines or change runs just to enable the connection. The body is constructed of ABS and allows a full flow of water through the valve body.This full-flow design helps to eliminate some of the common problems caused by a restriction in the line created by Y-valves. The valves do allow re-configuration of which ports are open or closed in the event the valve must be rotated a certain way for proper installation.In addition, Raritan supplies labels to place on the mounting straps so that the port is clearly labeled as to where the flow is directed. To satisfy No Discharge regulations the valve must be directed to a holding tank while in a No Discharge Zone and the handle removed. The handle easily detaches by simply lifting it up.Features: Full flow Diverter Y Valve The valve body is constructed of durable, high-strength ABS Any port can be easily configured as an Input All female ports are standard 1 ½ National Pipe Thread (NPT) A removable handle helps satisfy No Discharge Zone requirements Mounting clamps are included for easy bulkhead mounting Labels included for clear port identification WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pressure Reducing City Water Entry - In-Line - CreamThis combination pressure reducing city water entry and check valve diaphragm design prevents high-pressure damage often caused by city water systems. This high performance water entry limits water pressure safely to 50 PSI while meeting or surpassing all check valve code requirements. This in-line pressure reducing water entry includes a check valve. 3/4" GSH Female swivel inlet. 1/2" NPSM - Male Outlet.Features: Small size, easy installation Continuous protection from high pressure surges Hose mounting eliminates need for permanent installation Fits standard 3/4" hose fittings Built-in check valve 50 PSI This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

3/4" Water Strainer w/Bracket & Fittings - 50 Mesh ScreenSHURFLO's family of Raw Water Strainers are built to keep your bait tank, livewell and washdown pumps protected from harmful debris. The Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. An integral o-ring creates a tight seal, eliminating possible leaks. Keep your pumps and components lasting longer by protecting them with the SHURFLO Raw Water Strainer. 1 Year WarrantyFeatures: 50 Mesh Screen Protects Pumps from Harmful Debris High Capacity Rugged Nylon Housing with Clear Twist Off Polyamide Bowl Easy to Clean Slide Out Screen This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Heating Element with GasketThe WH1A-S is a screw in heating element that is 1250w at 120v designed to quickly and efficiently heat the water via electricity in a Raritan water heater. These elements must be installed, and the tank filled prior to applying any power or they will burn out. Raritan does offer an element that can last a bit longer if power is applied without water in the tank.Features: Includes Gasket Screw-In Type 120v WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 7"W x 8"L WT: 0.5 lbs UPC: 085462011269

Read more less

1-1/2" VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black - Sold by the FootTrident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.Features: Sold by the foot 149 series of hoses is extra flexible  Application:Bilge and live well hoseSpecifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 1.792" / (mm) 45.5 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 22 / (Kg/m) 9.98 Bend Radius: (inch) 4" / (mm) 101.6 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/2" Length (Feet): Sold By The Foot Box Dimensions: 3"H x 3"W x 12"L WT: 0.46 lbs Quick Guide (pdf)

Read more less

C.H. Cleans Hoses for Tanks & MSD - 1 GallonC.H. dissolves scale and calcium build-up and adds life to your boat's sanitation system while providing less maintenance and less cost over time. C.H. is specifically designed to remove uric scale and calcium carbonate from black water systems - from the toilet to the holding tank - without having to remove hoses.  Features:  Dissolves clogs which can cause odors and poor flushing performance Non-toxic, biodegradable, and safe to use with all materials commonly found in black water systems Safe and effective alternative to hazardous muriatic acid treatments Recommended for Lectra/San and Electroscan systems Best toilet cleaner WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AquaMax® Holding Tank Treatment - 32oz - Spring Shower ScentAquaMax® Holding Tank Treatment’s advanced enzyme-powered formulas neutralize odors and accelerate waste digestion to prevent clumping, clogging, and tank residue, all at the same time. Thetford’s beneficial probiotic treatments are Bronopol and Formaldehyde free.Features:  Enzyme-based holding tank treatment Breaks down waste and eliminates offensive odors Bottles with child-resistant caps Available in a one-gallon jug, 64-oz. bottle, 32-oz. bottle, and 6 pack of 8-oz. bottles Easy dosing system: 8-oz of AquaMAX® treats a 40-gallon holding tank Formaldehyde free Bronopol free Neutralizes odor Breaks down waste to prevent clumping, clogging, and tank residue Enzymes optimized for MAX performance Beneficial probiotics; good bacteria Septic system safe Campground and marina friendly Compliant with all current regulations Available as a liquid, dry granule or Toss-Ins® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Perko 5/8" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad FlangeTechnical Information: Hose Size Inches: 5/8 Mounting Hole Diameter Inches: 13/16 Maximum Hull Thickness Inches: 1-1/4 O.D. Flange Inches: 1-1/2 Model Number: 0328DP4A Ship Weight: 1.0/6.1 lbs. MADE IN THE USA Specifications: Hose Size: 5/8" Material: Plastic Box Dimensions: 2"H x 2"W x 6"L WT: 0.07 lbs UPC: 085226000065

Read more less

1-1/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller i.d.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1-1/4" / (mm) 31.8 Outer Diameter: (inch) 1.40" / (mm) 32 Working Pressure: (Psi) 70 / (bar) 4.8 Bend Radius: (inch) 1.5" / (mm) 38 Weight: (Lb./50 ft.) 35 / (Kg/m) 15.7 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/4" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 1"L WT: 0.64 lbs Quick Guide (pdf)

Read more less

Gulper Toilet Pump - 24VA non-clog, no filter waste pump to deal with unmacerated toilet waste.  Gulper pumps are built on more than two decades of leading technology.Features: Virtually unblockable  Pumps a mixture of air and waste Runs dry without damage Specifications: 3 Year Warranty CE certified Meets IAO 10133, ISO 8846, IP45

Read more less

Gulper 220 Grey Waste Pump 24VGulper valve technoloogy handles shower waste such as hair and gel. No clog, no filter waste pump built on more than a decade of market leading pump technology.Features Up to 14 ltrs (3.7 US gals) per minute Will run dry without damage and pump a mixture of air and water Specially designed to pump waste water Large single diaphragm Virtually non-choke valves No filter required Self-priming up to 3 m (10 ft) Easy to install in confined spaces Double outlet valve ensuring continuous flow Multi directional head Can be mounted almost anywhere Low power consumption WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 204 GPH Gallons Per Minute: 3.4 GPM Inlet Size: 3/4" Outlet Size: 3/4" Suction Lift (ft.): 10' Volts: 24v Type: Waste Pumps Box Dimensions: 6"H x 8"W x 13"L WT: 4.1 lbs UPC: 766478155405

Read more less

Bronze AC Motor Pump UnitFlow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 7.8ftFeatures: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance - seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow. APPLICATIONSMARINE:Bait tank circulation, transfer oil, wash down, and utility dock pumps.INDUSTRIAL:Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump.FOOD, BEVERAGE, & DAIRY:Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump.HOME:Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners.PLUMBING:Empty clogged sumps, drains, sinks and tubs, and pump out water closets.FARM:Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens.CONTRACTORS:Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9.6 GPM Max PSI: 17.3 Volts: 115v Box Dimensions: 10"H x 11"W x 11"L WT: 22.45 lbs UPC: 671880007573 Owner's Manual (pdf)

Read more less

Double Barb Inline Scupper Check Valve - 1-1/8" - BlackA great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper Specifications: Construction: Polymer Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs UPC: 733572065008

Read more less

Perko 5" X 3-1/4" Scoop Strainer BronzeCast bronzeMachine slotsTechnical Information: For Thru-Hull Size Inches: 3/4 & 1 Dimensions Strainer Inches: 5 X 3-1/4 Model Number: 0066DP2PLB Ship Weight: 4.4/4.3 lbs. Screw Size: #8 Specifications: Material: Bronze Box Dimensions: 1"H x 3"W x 5"L WT: 0.85 lbs UPC: 085226337390

Read more less

Perko 1" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad FlangeTechnical Information: Hose Size Inches: 1 Mounting Hole Diameter Inches: 1-1-5/16 Maximum Hull Thickness Inches: 1-1/2 O.D. Flange Inches: 2-1/4 Model Number: 0328DP6 Ship Weight: 2.0/7.3 lbs. MADE IN THE USA Specifications: Hose Size: 1" Material: Plastic Box Dimensions: 2"H x 2"W x 4"L WT: 0.15 lbs UPC: 085226768507

Read more less

Manual Marine Toilet - Regular Bowl with Soft Close LidFrom best-selling manual toilets to household-style luxury models, Jabsco marine toilets are both simple and reliable. Popular worldwide for more than two decades, Jabsco‘s sturdy manual toilet ensures peace of mind thanks to the intuitive, simple to use Twist ‘n‘ Lock feature. It provides protection against siphonic flooding and waste backflow with one easy, 90° turn of a handle. Features: A powerful self-priming pump allows installation above or below the waterline A reversible mounting gives the option to install the pump on the right or left A flexible design makes it suitable for either overboard or holding tank discharge Corrosion-resistant materials throughout permit salt and fresh water service Fastenings face front or top for ease of maintenance For use with sea, river or lake water only Raw water Composite Soft Close lid Regular bowl size Specifications: Size: Household Size Operation Method: Manual Color: White Type: Toilet Box Dimensions: 17"H x 20"W x 21"L WT: 28.75 lbs UPC: 671880628297

Read more less

2000 Bilge Pump - 24VDC, 1500GPH - 1-1/8" Port SubmersibleHeavy duty and built to last. SHURFLO®'s 2000 GPH nylon bilge pumps offer a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our swivel base and 6' tinned wire assembly. 3 Year WarrantySpecifications: 24 VDC, 1500 GPH [5677 LPH] 4 Amps (Max.) Bilge Applications Continuous Duty Submersible with 6' [1.8M] Wire Assembly Swivel Baseplate Commercial Duty Ignition Protected 1- 1/8" [29mm] Outlet Dimensions: 7.2" [184mm] X 6" [154mm] This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 24v Outlet Size: 1-1/8" Gallons Per Hour: 2000 GPH Type: Electric Box Dimensions: 6"H x 7"W x 9"L WT: 5.6 lbs UPC: 752324010578

Read more less

SHURFLO PRO WASHDOWN KIT™ II Deluxe - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' HoseSHURFLO's PRO WASHDOWN KIT II Deluxe includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Deluxe 4.0), fittings, nozzle, raw water strainer and a 25' coiled hose.Features: Replaces 4903 Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Max PSI: 60 Volts: 12v Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 11"W x 18"L WT: 10.65 lbs UPC: 752324011995

Read more less

1" Water Strainer - 50 Mesh ScreenSHURFLO's family of Raw Water Strainers are built to keep your bait tank, livewell and washdown pumps protected from harmful debris. The Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. An integral o-ring creates a tight seal, eliminating possible leaks. Keep your pumps and components lasting longer by protecting them with the SHURFLO Raw Water Strainer. 1 Year WarrantyFeatures: 50 Mesh Screen Protects Pumps from Harmful Debris High Capacity Rugged Nylon Housing with Clear Twist Off Polyamide Bowl Easy to Clean Slide Out Screen This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

3/4" NPT Bronze Inline Fuel ValveFeatures: Selectable handle rotation Full flow Mount foot included C83600 bronze construction Stainless steel handle and hardware 400 WOG PTFE seats and seals UL listed for fuel or water Specifications: Construction: Bronze Box Dimensions: 3"H x 4"W x 6"L WT: 1.05 lbs UPC: 742985142206

Read more less

Fresh Water Filter Strainer Cover with O-Ring AssemblyFeatures: Strainer Cover For filters used with freshwater pumps

Read more less

AquaT Toilet Silent Electric Comfort - 12V with PumpThe AquaT Silent Electric Marine Toilet combines competitive pricing, a fine finish, and thoughtful design in a quiet, robust, and easy-to-clean marine head. Features: Equipped with proven Aqua Jet diaphragm pump The toilet is quiet, hygienic, and reliable Made with corrosion-resistant components throughout The water inlet and outlet take place in two distinct steps Low water consumption (2 - 2.5 liter/flush) Two-way switch May be installed above or below the waterline Versatile plumbing connection options Automatic back-flow prevention Long service life Complies with ISO 8846, ignition protection, and EN 55014 EMC Specifications: Height: standard marine Bowl Style: Household Materials: vitreous porcelain bowl for ease of cleaning, robust wooden seat, and cover with baked enamel finish Water Supply: raw sea or lake water, Aqua Jet diaphragm pump Inlet Hose: 0.75" ID Discharge Hose: 1.50" ID Specifications: Type: Toilet Color: White Size: Household Size Operation Method: Electric Volts: 12v Box Dimensions: 16"H x 17"W x 19"L WT: 35.8 lbs UPC: 7330717009816

Read more less

SWEETANK Odor Neutralization System - 115VACTHE CONCEPTThe SWEETTANK concept has been developed to stop odors in yacht and RV holding tanks without the use of chemicals or filters. SWEETTANK is standard equipment on THERMOPURE-2 Type-I MSD, in GROCO Type-III MSD,  and is offered in several retrofit kits to fit existing holding tanks.HOW IT WORKSAerobic and anaerobic bacteria coexist naturally in raw sewage, but it is the anaerobic bacteria that produce undesirable odors. By inducing a constant flow of air into the holding tank through a submerged aeration tube, SWEETTANK produces an oxygen-rich environment in which the anaerobic bacteria cannot thrive, thus eliminating unpleasant odors. The heart of the SWEETTANK system is a compact module that operates continuously to deliver air to the holding tank. Specifications: Type: Misc Box Dimensions: 3"H x 9"W x 11"L WT: 3.05 lbs UPC: 742985138322

Read more less

Swim 'N' Rinse Shower Hose Assembly - 7'The Whale AS5148 is a replacement 7-foot (2.1-meter) hose assembly designed specifically for the Whale Swim 'N' Rinse transom and deck shower ranges.

Read more less

TST Pro RV Holding Tank Treatment Drop-Ins - American Pine *10-PackCamco's TST PRO RV Holding Tank Treatment Drop-INs are an incredible solution that will keep your RV fresh and odor-free. Now you can truly enjoy every moment of your adventure. Join the countless RVers who trust Camco’s powerful holding tank treatments, which are proudly made in the USA. Maintain balanced camper holding tanks with these TST PRO Drop-INs. The bio-enzymatic formulation outperforms the competition, providing superior waste digestion in your camper toilet. It's the ultimate solution for managing both your black and grey water tank needs! Let the refreshing pine scent of TST PRO infuse your camper, creating an inviting atmosphere that embodies the freshness of the great outdoors. Rest assured that this American-made RV essential is septic-safe and crafted with the highest quality standards. Elevate your travel experience with Camco's RV tank treatments. Don't settle for anything less— upgrade today and embrace even better RV adventures!

Read more less

TST Pro RV Holding Tank Treatment - American Pine - 32ozCamco's TST PRO RV Holding Tank Treatment is an incredible solution that will keep your RV fresh and odor-free. Now you can truly enjoy every moment of your adventure. Join the countless RVers who trust Camco’s powerful holding tank treatments, which are proudly made in the USA. Maintain balanced camper holding tanks with this 32 oz bottle of TST PRO. The bio-enzymatic formulation outperforms the competition, providing superior waste digestion in your camper toilet. It's the ultimate solution for managing both your black and grey water tank needs! Let the refreshing pine scent of TST PRO infuse your camper, creating an inviting atmosphere that embodies the freshness of the great outdoors. Rest assured that this American-made RV essential is septic-safe and crafted with the highest quality standards. Elevate your travel experience with Camco's RV tank treatments. Don't settle for anything less— upgrade today and embrace even better RV adventures!

Read more less

Premium Drinking Water HosesHeavy Duty reinforced 5/8" ID drinking water hoses are 20% thicker than our standard hoses. Rated for 300 PSI and NSF listed. BPA free. Anti-kink design features machined fittings and strain-relief ends for added durability. Drinking water safe.

Read more less

Service Kit for Quiet Flush E2 ToiletsContains base cover screw (key 9a), waste pump housing o-rings (keys 13, 14a), joker valve (key 15), motor adaptor o-ring (key 19), washer seals (key 22), shaft seal (key 25), slinger (key 26).For the 38045 & 38245 Series Quiet Flush E2 toilets.

Read more less

1100GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 1100GPH pump will produce this flow at just 24V rather than 27.2V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104762 Brochure (pdf)

Read more less

1700 Series Water Heater120v12 GallonWith Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 12 Heat Exchanger: Yes Volts: 120v Box Dimensions: 21"H x 22"W x 23"L WT: 58 lbs UPC: 085462001550 Owner's Manual (pdf)Brochure (pdf)

Read more less

HotShot HD4 Heavy Duty Washdown Pump - 12V - 4 GPM - 60 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Max PSI: 60 Volts: 12v Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 8"W x 17"L WT: 8.8 lbs UPC: 671880841917 Brochure (pdf)

Read more less

Soft Close Household Style Seat & Cover - WhiteFeatures: Toilet seat and lid close slowly to prevent hard slamming Special stopper locks seat in place to prevent seat from sliding and potentially breaking hinges Fits all Raritan manual and electric toilets, except Atlantes elongated models Fits most other brands of marine compact and household style bowls Seat and lid made of high-density fiberboard (HDF) with durable plastic hinges Supplied with corrosion-resistant stainless steel fasteners Fits most household size bowls - 14" W x 15-7/16" D WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sealed MaceratorSelf-Priming Macerator Pump with Run-Dry ProtectionWaste EvacuationThe Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operationIt is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.Fish Box and Livewell Tank EvacuationThe Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.Features: Impeller: Jabsco Nitrile compound Macerator: Stainless Steel Cutter reduces particle size to 1/8" maximum. New 4 blade design Seal: Lip Type WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Inlet Size: 1-1/2" Outlet Size: 1" Volts: 12v Type: Waste Pumps Box Dimensions: 4"H x 5"W x 13"L WT: 5.3 lbs UPC: 671880564373 Owner's Manual (pdf)

Read more less

Impeller Kit - Neoprene - 10 Blade - 2" Diameter x 7/8" Wide - Slotted Shaft Pin Drive - Brass Insert - 15/32" Shaft DiameterThe Jabsco Neoprene Impeller Kit is a reliable replacement designed to keep your marine pump running smoothly. Featuring 10 flexible blades, a slotted shaft pin drive, and a durable brass insert, it delivers consistent water flow and dependable performance.

Read more less

Check Valve for 800/1100 Bilge 1-1/8" Straight PortsReplacement Check valves for the "new" Rule-Mate Bilge pumps. Helps prevent backflow of water into the bilge.Specifications:1-1/8" 

Read more less

EvoFlex 75' RV/Marine Drinking Water Hose - 5/8" IDCamco’s EvoFlex 75-Foot Drinking Water Hose with a 5/8-inch ID is ideal for RV and marine use. Its extra flexible construction holds no memory, making it easier to position and store. It features nickel-plated machined fittings and stainless steel strain reliefs on each hose end. Drinking water is safe with a lead-free, BPA-free, and phthalate-free formulation. The hose leaves no strong plastic taste in your water. UV stabilized for long life. Made in the USA.Features: Extra Flexible Design: Holds no memory, making it easier to position and store The Perfect Size Hose: 75-foot hose with 5/8-inch diameter Drinking-Water Safe: Contains a BPA-free, lead-free, and phthalate-free formulation Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water Durable Construction: Features nickel-plated machined fittings with stainless steel strain reliefs; UV Stabilized: For a long life Made in the USA: The product is proudly made in the USA

Read more less