Automatic Submersible Bilge Pump - Electromagnetic Switch01604-00 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 12-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty Specifications: Gallons Per Hour: 1600 GPH Operation: Automatic Outlet Size: 1-1/8" or 1-1/4" Volts: 12v Type: Electric Box Dimensions: 8"H x 8"W x 8"L WT: 4.25 lbs UPC: 729321916431

Read more less

Spare Motor for CartridgeUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 4"H x 6"W x 7"L WT: 0.71 lbs UPC: 729321285728

Read more less

Brass Snap Handle Drain Plug - 1" Snap-handle drain plugs feature cam action for easy installation and a leak proof seal. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Durable stamped brass and nitrile rubber construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

In-Line Check Valve - 1/2" BarbsThis check valve allows water to flow in only one direction helping to safeguard against back surge pressure up to 100 PSI.Features: Allows flow in one direction only Safeguards against backsurge up to 100 PSI Small size, easy installation This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24" Diameter: 1-3/4" Strokes/Gal: 6 Capacity: 10GPM Hose Length: 72" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 GPM Type: Manual Box Dimensions: 2"H x 8"W x 30"L WT: 1.55 lbs UPC: 021083000084

Read more less

Beckson Screw Type 1" Drain PlugScrew-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.

Read more less

Talulah High Flow Ballast Pump - 30 GPM - 12VWith an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world.Features: Built in Thermal Overheat Protection: Automatic reset after cooling down Monitor Filling: Tanks must have overfill protection Retrofit Possible: Important to have full bore hoses – without restriction Dry Run Impeller* Intermittent Duty Important to have good electric installation and proper wire size (Acc. to ISO 10133) Recommend fresh batteries and engine running (alternator running) to ensure power supply *Dry Run

Read more less

Dual Rocker Switch PanelFor use with Jabsco 37045/37245 Quiet Toilets.

Read more less

1100GPH Electronic Sensing Bilge Pump - 12VIn the next generation sensing bilge pumps, the 1100GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!!Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 100 GPH Operation: Automatic Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 1 lbs UPC: 042237104809

Read more less

Service Kit f/Electric Toilet 37010 SeriesIncludes: Joker Valve O-Ring Washer, Fiber Gasket Flexible Impeller Seal & Retainer WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 7"W x 7"L WT: 0.4 lbs UPC: 671880032827

Read more less

DC 150 CFM Flexmount 3" BlowersFeatures: Tough Reinforced Plastic Housing Universal flexmount bracket permits outlet to face any direction Slip-On Inlet and Outlet Ducting Connection Efficient High Volume Air Flow Low Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection Complies with Complies with ISO 9097 MARINE WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 3" Open Flow (CFM): 150 CFM Volts: 24v Box Dimensions: 7"H x 8"W x 9"L WT: 4.75 lbs UPC: 671880031998 Owner's Manual (pdf)

Read more less

Par-Max 2 Water Pressure Pump - 12V - 2 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 35 Gallons Per Minute: 2 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.9 lbs UPC: 671880841764 Brochure (pdf)

Read more less

ARG-500 Series 1/2" Raw Water Strainer with Non-Metallic Plastic BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic/Plastic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D  Specifications: Material: Plastic Box Dimensions: 5"H x 5"W x 10"L WT: 4.35 lbs UPC: 742985106864

Read more less

Non-Metallic Strainer Cap Fits ARG-500 & ARG-750Features: Non-Metallic Strainer Cap  Fits ARG-500 & ARG-750

Read more less

1" NPS NPT Combo Stainless Steel Thru-Hull Fitting with NutFeatures: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available Specifications: Hose Size: 1" Material: Stainless Steel Box Dimensions: 3"H x 3"W x 5"L WT: 0.7 lbs UPC: 742985146471

Read more less

Ballast PumpThis Wake/Surf boat Ballast pump is the same one utilized by most major boat builders. The Jabsco pump comes standard with a green Run Dry Impeller. This pump has the standard electrical quick connector installed. Just connect your hoses, mount the pump into the boat, in its orginal position, plug the power leads together and your surfing and wakeboarding again. Impeller # 6303-0007-P - Always Carry a Spare Orignial OEM Ballast Pump Replacement Run Dry Impeller - Green Same electrical connection as Original OEM Same mounting as the OEM unit, no need to drill more holes The leader for Flexible Impeller Ballast Pumps WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Utility PumpThe 6050-Series pumps are the highest capacity, self-priming, portable Utility Pumps offered by Jabsco Bronze pump head 23 GPM output at 10ft total head Continuous duty motor with thermal over-load protection Motor wired to operate with 115v and can be converted to 230v Open drip proof motor 8' power cord with grounded plug convenient carrying handle WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 23 GPM Volts: 115v Box Dimensions: 12"H x 12"W x 13"L WT: 28.75 lbs UPC: 671880004374 Owner's Manual (pdf)

Read more less

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 6"L WT: 3.1 lbs UPC: 042237083326 Owner's Manual (pdf)

Read more less

1-1/8" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black HelixTrident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required. Features:Flexible, but the 147 series is less flexible than the 149 series of hosesApplication:Bilge and live well hoseSpecifications: Tube & Cover: Clear vinyl reinforced with black helix  Color: Clear with black helix Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-49°C)  Boxed: 50ft. / (15.24m) Inner Diameter: (inch) 1-1/8" / (mm) 28.6 Outer Diameter: (inch) 1.39" / (mm) 35.4 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.45 Bend Radius: (inch) 3.5" / (mm) 8.9 *Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 1-1/8" Box Dimensions: 8"H x 23"W x 23"L WT: 14.2 lbs UPC: 704917006192 Quick Guide (pdf)

Read more less

1-1/2" Stainless Steel Extra Long Thru-Hull Fitting w/Nut Features: Extra long NPSM / NPT combination thread #316 Stainless Steel Specifications: Hose Size: 1-1/2" Material: Stainless Steel Box Dimensions: 5"H x 6"W x 7"L WT: 2.1 lbs UPC: 742985175181

Read more less

1" Fresh Water Strainer with Plastic Basket Features: Protect fresh water pumps from debris.   White nylon strainer head and clear plastic sight glass.  Glass unscrews for filter basket cleaning.  Mount bracket included. Use WSB-P for salt-water or continuous duty AC or genset.  Specifications: Material: Plastic Box Dimensions: 5"H x 6"W x 8"L WT: 1.2 lbs UPC: 742985138858

Read more less

1-1/4" NPS NPT Combo Stainless Steel Thru-Hull Fitting with NutFeatures: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available Specifications: Hose Size: 1-1/4" Material: Stainless Steel Box Dimensions: 5"H x 5"W x 5"L WT: 1.25 lbs UPC: 742985146488

Read more less

1" Bronze Pipe Nipple Check ValveFeatures: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C) Specifications: Construction: Bronze Box Dimensions: 1"H x 1"W x 3"L WT: 0.4 lbs UPC: 742985168374 Brochure (pdf)

Read more less

Bronze Slotted Hull Scoop Strainer with Access Door for Up to 3" Thru HullFeatures: Access door design allows easy access to Thru Hulls C84400 bronze body and door Cast filter slots Pressure relief holes in door casting Specifications: Construction: Bronze Box Dimensions: 8"H x 8"W x 15"L WT: 13.4 lbs UPC: 742985119079

Read more less

Thermostatic Mixing Valve Kit for Nautic Boiler B3A thermostatic mixing valve is a valve that blends hot water with cold water to ensure constant, safe shower and bath outlet temperatures, preventing scalding. The Quick thermostatic mixing valve is suited perfectly for the Quick and Sigmar brands of water heaters. This kit is sold complete with the valve, hose, and fittings.For use with Quick Nautic Boiler B3.

Read more less

Thermostat for Nautic BoilersReplacement thermostat for Quick brands of water heaters.Features: 15 Amps 270mm

Read more less

EBSN 15 Amp Electric Switch for Bilge PumpFeatures: Operation managed by microcontroller Advanced digital filter to distinguish the presence of water. Extended power supply range Remote indication of operation status by LED or remote control panel (optional). Manual remote pump switch-on by button or remote control panel (optional). Signal for prolonged bilge pump switch-on (if LED or remote control panel is installed). Protection against excessive battery rundown. Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat. Functioning over a wide range of environmental temperatures. Resin-coated watertight casing Easy installation Specifications: Type: Switches Volts: 12/24v Box Dimensions: 3"H x 5"W x 7"L WT: 1.12 lbs UPC: 1111111122228

Read more less

Rule-Mate® 800 Fully Automated Bilge Pump - 12VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 800 GPH/3028 LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Operation: Automatic Gallons Per Hour: 800 GPH Volts: 12v Box Dimensions: 4"H x 7"W x 9"L WT: 1.2 lbs UPC: 042237106223

Read more less

In-Line Non-return ValveNon-return valves help priming and prevent backflow of water into the bilge. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Inlet Size: 3/4" Outlet Size: 3/4" Type: Misc Box Dimensions: 2"H x 4"W x 6"L WT: 0.2 lbs UPC: 671880551397 Quick Guide (pdf)

Read more less

In-Line Non-Return Check Valve - 1-1/2"In-line non-return valve. Connections for 38mm (1½”) bore hose. Features: Connections: - for 38mm (1½”) bore hose Dimensions: - 108mm long, 55mm wide, 50mm high (in-line configuration) Aids pump priming, prevents backflow from pump into bilge Fits into pump suction line Robust plastic construction with nitrile rubber valve Adjustable port configuration for convenient hose angle Actual Weight: 0.11 Kg  (Approx. 0.31 Kg packed) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

1201R 3/4" Port - 90° BarbPort Fitting - 19mm (3/4") 90° Hose Barb

Read more less

1-1/4" NPT x 1-1/4" ID Bronze Pipe to Hose Straight FittingFeatures: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 3"L WT: 0.47 lbs UPC: 742985004948

Read more less

Electric Marine Toilet - Regular Bowl with Soft Close Lid - 12VThis versatile toilet brings the luxury of electric flushing aboard your vessel. It offers two options: a household size bowl for all the convenience of home, and a compact bowl where space is a premium.Features: An integral self-priming rinse pump designed to bring sea, river or lake water into the bowl comes standard A flexible design makes it suitable for overboard or holding tank discharge A built-in backflow preventer guards against flooding and waste return Corrosion-resistant materials throughout permit fresh or salt water service Can be mounted 3' (1m) above or below the waterline with appropriate plumbing For use with sea, river or lake water only Regular Bowl size Composite - Soft Close lid Raw water Integral/Rinse Pump Specifications: Size: Household Size Operation Method: Electric Color: White Volts: 12v Type: Toilet Box Dimensions: 17"H x 21"W x 21"L WT: 29.6 lbs UPC: 671880628334

Read more less

Flexmount BlowerHigh volume air intake or extraction blowers for engine room, fuel compartment, galley or headsFeatures: Flexmounting for 360° adjustable outlet Slip-on inlet and outlet ducting connection Low current draw Dimensionally stable quiet running Delrin rotors Corrosion resistant materials throughout Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) ISO 9097 MARINE (Electric Fans) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 3" Open Flow (CFM): 105 CFM Volts: 12v Box Dimensions: 7"H x 8"W x 9"L WT: 2.9 lbs UPC: 671880030526 Owner's Manual (pdf)

Read more less

Electrode Pack - 12vRaritan's 12v Electrode Pack is energized during the treatment cycle as electricity passes through the conductive salt water. Hypochlorous acid, a powerful bactericide and oxidizing agent, is produced on the surface of the plates.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 7"H x 7"W x 11"L WT: 0.85 lbs UPC: 085462002458

Read more less

Quiet Flush Electric Toilet - Rear Macerator with Solenoid Valve - Regular SizeThe Commodore Quiet Flush Electric Marine Toilet provides a superior onboard experience with a focus on comfort, quiet operation, and durability. Designed with a powerful yet whisper-quiet built-in macerator pump and a soft-close seat, this electric toilet operates as smoothly and silently as a household unit. Its freshwater flush connects seamlessly to any pressurized water system, offering efficient and clean flushing without contaminating the potable water supply, thanks to the included anti-siphon solenoid valve.Built with a high-quality white ceramic bowl, the CM3RMT ensures long-lasting durability and easy cleaning. The compact, space-saving design allows the bowl to be rotated 90° for flexible installation in tight marine spaces. Designed for above- or below-waterline use, this marine toilet is constructed with corrosion-resistant materials, ensuring reliability in harsh marine environments.Features: Ultra-Quiet Flush Operation: Designed to radically reduce noise levels, the quiet flush cycle provides a smooth and near-silent operation, delivering a household-like experience onboard. Built-In Macerator Pump: The upgraded macerator with a stainless steel chopper plate ensures efficient waste grinding and discharge, reducing clogs and improving reliability. Soft-Close Seat for Added Comfort: Features a soft-close seat that eliminates slamming and adds a touch of luxury, enhancing comfort for all passengers. Anti-Siphon Solenoid Valve: Equipped with a water control solenoid valve with an integrated anti-siphon breaker to prevent backflow contamination of your potable water supply. Easy-to-Clean Ceramic Bowl: The smooth, white vitreous china ceramic bowl is easy to clean, with crevice-free contours that enhance hygiene and reduce maintenance. Flexible Installation Options: The bowl can be rotated 90° for mounting in confined spaces, making it ideal for tight marine configurations above or below the waterline. Pressurized Water System Compatibility: Easily connects to any vessel’s pressurized water system capable of delivering a flow rate of 3.5 GPM (13.5 LPM). Corrosion-Resistant Construction: Built with all marine-grade materials, including a stainless steel motor shaft, to withstand harsh saltwater environments for long-lasting durability. Specifications: Voltage: 12V Max Draw: 16A Port: Inlet 3/4" Hose Barb, Outlet 1" Hose Barb Size: Regular Material: Ceramic bowl, Soft close seat Features: Built-in macerator Dimensions: 18.5"L x 14.01"W x 13.97"H Included Components: Commodore CM3RMT Electric Marine Toilet (Regular Size) Solenoid Valve with Anti-Siphon Breaker Single Button Flush Actuator with Water Level Control 3/4" Inlet and 1" Discharge Hose Adapters Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" Rinse Water: Fresh Type: Toilet Volts: 12v Box Dimensions: 16"H x 17"W x 21"L WT: 35.7 lbs UPC: 817683023437

Read more less

PH PowerFlush Electric/Manual Toilet - Marine Size - 12v - White PH Powerflush was designed to provide a unique option not available in any other marine toilet. Most toilets are either manual operation or electric macerating toilets. The Powerflush does not macerate but does offer the best of both worlds for those needing the option to switch to manual operation. The PH pump used on the PH Powerflush is a design that is timeless. The dual action pump is 66% larger in diameter than any competitive market. Because the housing is larger it more easily moves more water in and out of the bowl meaning you spend less time pumping and more time enjoying your time on the water. If water usage is a concern the intake water can easily be turned off and the unit can still be pumped to allow flushing with virtually no water being used. When installed as a Powerflush the simple push of a button activates the motor and arm that moves the piston up and down to flush the toilet. Should you lose power or need to conserve power the toilet converts easily to manual operation by removing the pin and inserting a handle into the pump.Features: PH PowerFlush electric model can be switched to manual superflush within minutes. Upgrading to PH SuperFlush and PowerFlush is fast and easy! Mounting base configuration matches the bolt pattern used on most competitive toilets. Clear the bowl with less strokes! Our robust double action piston pump is 66% larger than competitive models making its use quick, easy and efficient. Trouble free operation! Proprietary full size 1½” joker valve is specially designed to maintain pump performance. Slow close seat design - Seat locks in place while boat is rocking, no more slamming seats Full size joker valve which helps to prevent clogs and improves the flushing action WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Type: Toilet Size: Compact Size Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" Rinse Water: RAW Volts: 12v Box Dimensions: 16"H x 23"W x 24"L WT: 36 lbs UPC: 085462040955 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Sea Era QC Electric Toilet - Marine Size - Integral Pump - Straight & 90° Discharge - 12vThe SeaEra was designed to fit in small spaces and allows users to rotate the base in 90 degree increments when the floor space is oddly shaped or was designed for a manual toilet with a pump and long base. The “original” SeaEra has an integral intake pump so all connections are at the toilet. The SeaEra with integral pump has some design features that separate it from the competition. Our design separates the intake water from the discharge water by the full length of the motor. This ensures no possibility of cross contamination. Similar competitive units have the intake and discharge only separated by a seal which means a seal failure allows waste water back into the bowl. Another feature is the full size joker valve which provides better performance and substantially reduces the probability of clogs. This original design is only available in the SeaEra which Is the macerating base with an integral intake pump. The SeaEra QC offers the option of a remote intake pump or pressurized fresh water solenoid.Engineering has developed a new built-in discharge fitting that can accept either 1-1/2" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra's discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable 3/4" (19mm) hose barb fittings (two straight and one 90 Degrees), which are included.Features: Integral pump Straight and 90º discharge Marine style bowl Benefits: Uncompromising quality for the most demanding boaters Economical electric macerating marine toilet Simple and flexible installation for mounting above or below waterline Bowl can be rotated 90 Degrees for mounting into confined spaces and retrofit mounting Heavy-duty marine push-button switch included with all models Pressurized freshwater models include vacuum breaker Fits 1-1/2" (38mm) or 1" (25mm) discharge line with no adapters Easy to clean and maintain Can be run dry without damaging the pump Low power consumption and quieter operation for on-board pressurized freshwater models Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks Each unit is assembled by hand, individually tested and backed by Raritan's one-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Gallons Per Minute: 3 GPM Operation Method: Electric Rinse Water: RAW Suction Lift (ft.): 4' Volts: 12v Type: Toilet Size: Compact Size Box Dimensions: 17"H x 23"W x 24"L WT: 35 lbs UPC: 085462014123 Quick Guide (pdf)Brochure (pdf)

Read more less

Diaphragm Intake Pump - 24vRaritan's Diaphragm Intake Pump and Motor AssemblySpecifications:24 VoltsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 5"H x 5"W x 11"L WT: 5.2 lbs UPC: 085462016622

Read more less

Water Outlet Fitting(0504) Chrome Plated Bronze Standard Male Hose Connector Black Plastic Watertight Plug Stainless Steel Bead Chain For use with on-board washdown systemsPipe Size: 1/2"O.D. Flange: 2-3/4" Specifications: Construction: Chrome Plated Bronze Box Dimensions: 2"H x 4"W x 7"L WT: 0.35 lbs UPC: 085226007088

Read more less

Rule In-Line Blower - 3" DuctingPart Number: 140Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule? in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets.Features Efficient high-volume air flow Quiet operation Low amp draw Slip-on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nickel-plated motor housing IMCI (CE) USCG 183.410 Compliant: Ignition protected Applications:Race cars and helmet ventilationBus ventilation (engine and bathroom fumes)Prison van ventilation (cooling, air-freshening)Blow-up signs and mascotsTanning boothsBuilding ventilationSpecifications Approvals: CE Dimensions (H x W x D): 76 x 127 x 81 (mm) ElectricalCharacteristics: 2.9 Amp Flow Rate (US gallons & litres): 135 CFM @ Open Flow Fuse Size: 4 (amp) Product Inlet Fitting: 3" (76 mm) Ducting Product Outlet Fitting: 3" (76 mm) Ducting Voltage: 13.6 (Vdc) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 3" Open Flow (CFM): 135 CFM Volts: 12v Box Dimensions: 5"H x 6"W x 6"L WT: 0.9 lbs UPC: 042237085412 Owner's Manual (pdf)

Read more less

Valve Kit VitonThe Jabsco's Valve Kit Viton is a check valve kit, Viton for a Jabsco diaphragm pump.

Read more less

Twist-On Water Strainer - 1/2" Barb Inlet - Clear BowlClean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly.Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PIRANHA™ Angled Port Aerator 800 Livewell Pump - 12 VDC, 800 GPHSmart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO Livewell Pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning. Features: Submersible Anti-Airlock Removable Cartridge High Density Nylon Housing Heavy Duty Water Cooled Motor Includes Hex Nut & Washer Ignition Protected ISO 8846 2 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Hour: 800 GPH Box Dimensions: 4"H x 9"W x 10"L WT: 1.4 lbs UPC: 752324007004

Read more less

Standard Utility Pump - 12 VDC, 1.5 GPMIncorporating SHURFLO's advanced motor technology that includes thermal overload protection, the general purpose pumps are self-priming, easy to install and are extremely versatile.Features: 12 VDC Ignition Protected BUNA Valves CE 7' [2.1m] Prime Hose kit Included Uses: Winterizing, Oil Change and Liquid Transfers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Minute: 1.5 GPM Box Dimensions: 5"H x 6"W x 11"L WT: 4.2 lbs UPC: 752324009190

Read more less

Marine Elegance Discharge Pump Assembly - 24VRaritan's Marine Elegance Discharge Pump Assembly, 24V.In the Box: M23A             #10 Lockwasher SS (5) 1108A            10-32 SS Nut 161123           Macerator Blade 31-102           Motor Shaft Seal 221110           Discharge Pump Seal Plate 221105           O-Ring 161115            Impeller 221115            Discharge Pump Macerator Housing 31-114             Lock Nut 10-32 W/Nylon(3) 221012            Discharge Motor 12 V or 221024 Discharge Motor 24V 221141W         Discharge Hose 221135W         Joker Valve (2) (Also includes #24) 221145            Discharge Adapter Fitting 221146            Joker Valve Insert 221160            Discharge Hose Clamp (small) 221165            Discharge Hose Clamp (large) VLVE               Vent Valve Assembly FC001             Vent Valve Hose Clamp WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PIRANHA™ Ballast 800 Pump - 12 VDC, 800 GPHEverything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.Features: Flow Rate 800 GPH Replaceable Cartridge Tough Nylon Construction Anti-Air Lock Feature Tinned 6 Feet Wire Assembly CE, Ignition Protected ISO 8846 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Minute: 800 GPH Box Dimensions: 3"H x 7"W x 9"L WT: 1.2 lbs UPC: 752324011902

Read more less

Perko 1/2" Thru-Hull Fitting w/ Pipe Thread BronzeFlange is machined to fit hull and grooved to retain bedding compound. Neckis threaded to approximately 3/8 inch from flange.Cast bronze.Technical Information: Pipe Size Inches: 1/2 Mouting Hole Diameter Inches: 13/16 Maximum Hull Thickness Inches: 1-3/8 O.D. Flange Inches: 1-1/2 Model Number: 0322DP4PLB Ship Weight: 1.8/7.9 lbs. MADE IN THE USA Specifications: Hose Size: 1/2" Material: Bronze Box Dimensions: 1"H x 1"W x 3"L WT: 0.3 lbs UPC: 085226035944

Read more less