1700 Series Water Heater120v20 GallonWith Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 20 Heat Exchanger: Yes Volts: 120v Box Dimensions: 22"H x 22"W x 28"L WT: 73 lbs UPC: 085462001628 Owner's Manual (pdf)Brochure (pdf)

Read more less

TD40 Cellular LTE - Cat - M1 4'-18' Tall - Works with All Non-Pressurized FluidsWith Mopeka, you can monitor your tank levels from your smartphone, tablet, or computer using the freely downloadable Co-Pilot App or via www.mopeka.cloud. Mopeka sensors work on 20lb cylinders to >90,000 gallon bulk storage tanks.Specifications: Sensor: TD40 Commodity: Non-Pressurized Liquids Mounting Location: Tank Top UL, UCL, ATEX Certifications: Class 1, Division 1, Group D Class 1, Zone 1, Group IIA Tank Type: Any Tank Orientation: Any Tank Size: Depths from 4' to 20' Operating Temperature Range: -50° TO 60°C -55° TO 140°F Default Communications: Global SIM 4G LTE CAT M1, NB-IoT, Boosted Bluetooth Battery Life: 4-6 years, replaceable Battery Type/Hard-Wired: Energizer Lithium AA Warranty: 3 years Specifications: Color: Black Box Dimensions: 5"H x 6"W x 6"L WT: 1.05 lbs

Read more less

PRO+ Bulk Cellular LTE - Cat - M1 for Over 4' TallThe PRO+ Sensor combines all the best technology of our ultrasonic sensing for the best sensor performance ever, using long-range Bluetooth communications to monitor tanks from the Mopeka App.  Approximately 3x the range of a normal Bluetooth sensor, this sensor is ideal for tanks located a long distance from the house. It can also be used in conjunction with a MopekaIoT Wifi Bridge to monitor tanks when outside of Bluetooth range.*Should your tank have a horizontal seam along the bottom length of your tank, please see the Mopeka Seam Adapter for Pro PlusFeatures: Mopeka PRO+ Bulk Cellular Sensor For Storage Tanks Cellular Communications LP Gas Tank Monitor For Bulk Storage Tanks Battery Powered Magnetically Attaches To Tank

Read more less

TD200 Cellular LTE - Cat - M1 4' Tall or Less - Works with All Non-Pressurized FluidsWith Mopeka, you can monitor your tank levels from your smartphone, tablet, or computer using the freely downloadable Co-Pilot App or via www.mopeka.cloud. Mopeka sensors work on 20lb cylinders to >90,000 gallon bulk storage tanks.Specifications: Sensor: TD200 Commodity: Non-Pressurized Liquids Mounting Location: Tank Top UL, UCL, ATEX Certifications: Class 1, Division 1, Group D Class 1, Zone 1, Group IIA Tank Type: Any Tank Orientation: Any Tank Size: Depths up to 4' Operating Temperature Range: -50° TO 60°C -55° TO 140°F Default Communications: Global SIM 4G LTE, CAT M1, NB-IoT, Boosted Bluetooth Battery Life: 4-6 years, replaceable Battery Type/Hard-Wired: Energizer Lithium AA Warranty: 3 years

Read more less

Siphon-Mate Siphon PumpSpecialty Transfer PumpSafety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle. Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.Features Use for diesel, oil, water Length: 11-1/2" (28.4cm) Diameter: 1-1/4" (32mm) Lifts: 4 oz (.12 L) per stroke WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 2"H x 9"W x 14"L WT: 1 lbs UPC: 021083000299

Read more less

Seaward 11 Gallon Hot Water Heater with Front Heat Exchanger - White Epoxy - 120V - 1500WWhale Electric Water Heaters includes models with the very latest technology. All heaters are manufactured from only highest quality materials and designed to specifically withstand harsh marine conditions.The White Epoxy Coated Aluminium cases are well-suited to install in many of today's engine rooms. Their white appearance blends in well with existing equipment and the coated aluminium material offers corrosion resistance.Features and Benefits Multiple versions to suit your installation Robust Manufacturing Safety controls Magnesium anodes available separately Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1" x 50' Clear Reinforced PVC Hose Tubing - Red & Blue TracerNylon reinforced. FDA compounded PVC for pressurized drinking water systems, etc. No taste or odor. #162=175 PSI (1.21Mpa). Operating temperatures +20° to +150° F (-7° to +66°C). NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. CA Prop 65 Compliant. Specifications: ID Diameter (inches): 1" Length (Feet): 50 Box Dimensions: 6"H x 22"W x 23"L WT: 15.5 lbs UPC: 704917006932

Read more less

3" x 50' Blue Polyduct Blower HoseTrident Polyduct is the most flexible, crush proof and rugged blower duct hose for heat, ventilation, and air conditioning* (HVAC). Heavy Duty polypropylene hose, reinforced with a flexible polypropylene rod helix.Features: Excellent flexibility & compressibility Excellent resistance to crushing, flex fatigue, tearing, and moisture  Stomp on it and it returns to shape without damage  Shove it thru tight openings and overheads and it delivers full airflow Application:Rugged blower duct hose for heat, ventilation and air conditioningSpecifications:  Temperature Range: -40°F to +225°F (-40°C to 107°C) (when insulated) Length (feet): 50' Boxed Inner Diameter (inch): 3" *Meets FMVSS 302 flame resistance Specifications: ID Diameter (inches): 3" Length (Feet): 50' Box Dimensions: 20"H x 20"W x 20"L WT: 9.5 lbs UPC: 704917017518

Read more less

Perko Garboard Drain & Drain Plug Assy Cast Bronze/BrassCast bronze flange with brass plug. Technical Information: Pipe Size Inches: 1/2 O.D. Flange Inches: 2 Model Number: 0714DP1PLB Screw Size: 8 Ship Weight: 1.6/12.9 lbs. MADE IN THE USA

Read more less

Aqua Void Electro-Magnetic Combo 800 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.This pump is combined with a non-clogging electro-magnetic float switch for automatic operation. The switch reacts to the level of water present in the bilge and automatically activates and deactivates the pump.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with SwitchesThis cartridge pump combines an electro-magnetic float switch Specifications: Pump Size: 800 GPH Capacity Straight (12V): 785 GPH (50 I/min) Voltage: 12V Amp: 3.7A Fuse: 5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 17.3 oz (0.49 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 3.88 x 4.69 x 6.17 inches (99 x 120 x 157 mm) Specifications: Gallons Per Hour: 800 GPH Operation: Automatic Outlet Size: 3/4" Type: Electric Volts: 12v Box Dimensions: 4"H x 6"W x 6"L WT: 1.2 lbs UPC: 7330717017965 Quick Guide (pdf)

Read more less

Bronze Strainer Cap - Fits ARG-1000 & ARG-1250This bronze strainer cap fits GROCO water strainers ARG-1000 and ARG-1250.Specifications:Material: Bronze*Does not come with O-rings Specifications: Material: Bronze Box Dimensions: 2"H x 4"W x 4"L WT: 0.85 lbs UPC: 742985134188

Read more less

Blow Out Plug - Brass - Quick-Connect StyleCompletely clear your water lines with RV blow-out plugs. Screw the plug into the city water inlet, open all drains and faucets, attach and activate air pump until all lines are clear.

Read more less

304 Stainless Steel Basket Strainer Only Size 7 for 1-1/4" StrainerFeatures: Perko 049300799D 304 Stainless Steel Strainer Basket For #7 (1-1/4"-npt) Basket Measures 2-5/8"-dia. X 6-1/4"-high

Read more less

Perko 3/4" Intake Strainer BronzeCast bronzeMachined SlotsTechnical Information: Maximum Pipe Size Inches: 3/4 Maximum Hull Thickness Inches: 2-3/16 Dimensions Strainer Inches: 3 x 4 Model Number: 0065DP5PLB Ship Weight: 5.2/10.6 Screw Size: #8 Spare Flanged Nut: 0075 Specifications: Material: Bronze Hose Size: 3/4" Box Dimensions: 3"H x 4"W x 4"L WT: 1.1 lbs UPC: 085226031700

Read more less

2"" NPT x 2" ID Stainless Steel Pipe to Hose Straight Fitting Features: Male NPT x Hose connection #316 Stainless Steel Sizes from 1/2" to 3" Standard Flow NSF-61 compliant Suitable for use in potable water systems Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 4"W x 5"L WT: 1 lbs UPC: 742985143401

Read more less

1-1/2" Bronze Extra Long Thru-Hull Fitting w/Nut Features: Extra long NPSM / NPT combination thread C83600 Bronze Specifications: Hose Size: 1-1/2" Material: Bronze Box Dimensions: 3"H x 3"W x 6"L WT: 1.65 lbs UPC: 742985141773

Read more less

1" Stainless Steel Extra Long Thru-Hull Fitting w/Nut Features: Extra long NPSM / NPT combination thread #316 Stainless Steel Specifications: Material: Stainless Steel Hose Size: 1" Box Dimensions: 5"H x 6"W x 7"L WT: 1.15 lbs UPC: 742985175174

Read more less

Stainless Steel Replacement Screen f/APHS-2000 - Size 2 (.125") Perforation DiameterFeatures: Replacement Screen Stainless Steel Size 2 (.125") Perforation Diameter Specifications: Material: Stainless Steel Box Dimensions: 0"H x 4"W x 6"L WT: 0.1 lbs UPC: 742985128620

Read more less

1-1/4" Hose Barb Stainless Straight Deck Drain Features: Scuppers are installed flush with the deck and have a removable drain. #316 Stainless Steel Thru Deck Drain with Bronze Hose Connection Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 8"L WT: 1.5 lbs UPC: 742985175112

Read more less

Rule-Mate® 800 Fully Automated Bilge Pump - 24VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 800 GPH/3028 LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Gallons Per Hour: 800 GPH Operation: Automatic Volts: 24v Box Dimensions: 4"H x 7"W x 9"L WT: 1.25 lbs UPC: 042237106254

Read more less

Replacement Cartridge for Tsunami 500 MK2Attwood replacement motor cartridge for T500 model Tsunami series bilge pumps. Sold per each.

Read more less

AQUA KING™ II Supreme Fresh Water Pump - 12 VDC - 5.0 GPMSHURFLO's AQUA KING II fresh water pump is designed for boats with multi-fixtures providing "Just like home" shower pressure, and can operate at lower flow conditions with low cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With a heavy duty motor built to withstand the tough marine environment, this motor features an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING II fresh water pump can run dry without damage. Inlet strainer and 1/2" hose barb fittings are included. Ignition protected. Thermally protected.Features: 5901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-In Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 55 Gallons Per Minute: 5 GPM Box Dimensions: 6"H x 6"W x 12"L WT: 7.8 lbs UPC: 752324011865

Read more less

Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design.Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Open Flow (CFM): 120 CFM Volts: 12v Box Dimensions: 4"H x 5"W x 6"L WT: 1 lbs UPC: 022697173348 Quick Guide (pdf)Brochure (pdf)

Read more less

High Water Bilge Alarm with Switch & Gauge - 24VUsing a compact float switch and dash mounted alarm, Rule provides boaters with a warning to high bilge water levels. Ideal for larger yachts and commercial vessels larger than 26' with unmanned compartments that have to comply with CFR 182.530. A bright LED indicator light provides a visual alarm when ambient noise levels exceed alarm volume. Constantly monitor your bilge for water and stay compliant to Coast Guard regulations with a Hi-Water Bilge Alarm from Rule.Features: Visible and audible alarm to monitor bilge water levels Includes mercury-free float switch and dash mounted alarm Complies with CFR 182.530 24V WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Ballast King Bronze DC Pump with Reversing Switch - 15 GPMWakeboard and Ski Boat Ballast PumpFeatures: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). Applications:The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty. Specifications: Body Materials: Bronze Impeller: Jabsco Neoprene compound Seal: Lip Type Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb  Voltage: 12 (Vdc) Amp Draw: 19 (amp) Fuse Size: 25 (amp) Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible  Duty Cycle: 30 Minutes Max Dimensions: 3 5/8 x 8 x 4 3/4 (inches) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 15 GPM Volts: 12v Box Dimensions: 6"H x 6"W x 12"L WT: 8.6 lbs UPC: 671880628846 Brochure (pdf)

Read more less

iL500 Plus In-Line & Submersible Pump 12V Suitable for diesel, fresh and salt water Quick diesel transfer with no spillage Water transfer, deck shower, or deck wash Continuous rating but should not be run dry for long periods Specifications Output: up to 31.8 litres/minute at up to 1bar (7 gallons/minute at 14psi) Connections: 3/4" (19mm) Hose Dimensions: 165mm long, 38mm diameter Amp Draw: 6 (amp) Weight: 560 (g) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 7 GPM Volts: 12v Type: Electric Box Dimensions: 4"H x 9"W x 13"L WT: 1.5 lbs UPC: 042237109828 Owner's Manual (pdf)

Read more less

Bilge Pump Heavy Duty 2250 GPH - 12VSubmersible heavy duty bilge pump 12V with pump capacity 140 L/min (2250 GPH) and 120 L/min (1900 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. Features: Heavy Duty Submersible For pleasure or commercial boats above 12m (36 Ft) length  Interchangeable with Rule 2000, Johnson Pump 22004/32-2200-01 Specifications: Weight: 0.9 kg/1 lb Dimensions: 150/6L x 170/6.7H x 130/5W mm/in  Fuse: 8A  *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 2250 GPH Gallons Per Minute: 37 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 12v Box Dimensions: 5"H x 6"W x 8"L WT: 4.45 lbs UPC: 7340176600127

Read more less

Bilge Float Switch - 12/24/30VThe 12/24/30V bilge float switch activates your bilgepump automatically when water exceeds the acceptable level and deactivate when water has been removed.For a fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Safe removal of bilgewater when nobody is onboard, approved for 500 000 cycles. 14A fuse.Features:Electric SwitchSpecifications:Weight: 0.13 kg/.25 lbs*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Switches Volts: 12/24/32v Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 7340176600240

Read more less

General Purpose Pump FIP F4 (12 GPM) - 12VDC 12V F4 size FIP pump with capacity 45 L/min (12 GMP). Used for pumping water, oils and chemicals.Features: Pump body in brass, stainless steel shaft and high quality impeller Self priming up to 5m vertical lift Reversible flow direction by changing polarity Interchangeable with Johnson Pump 10-24689-01 Specifications: Weight: 1 lg/2 lbs Dimensions: 180/7L x 90/3.5H x 120/4.7W mm/in  Port Connections: 19mm (1/2″) Fuse: 12,5A  *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Gallons Per Minute: 12 GPM Volts: 12v Box Dimensions: 4"H x 5"W x 8"L WT: 6.45 lbs UPC: 7340176600936

Read more less

2-Way Waste Manifold 12' Cable 1-1/2" Ports2-way manifold with Whale Intelligent Control built in. The waste manifold can be used with a Whale Gulper pump to create a greywater disposal system. The manifold accepts two waste inputs and senses water through the wall. This relays information to the Gulper IC pump to turn on and pump the wastewater.This Whale WM3884B IC manifold has 12 feet of cable and 1-1/2" ports.Specifications: Height: 115mm (4-1/2") Length Cable: 12' Cable Voltage: 12V - 24V DC Width: 139mm Hose Size Outlet: 25mm (1") & Inlet: 38mm (1-1/2") Model: WM3884B Depth: 102mm (4")

Read more less

Temperature & Pressure Relief Valve1/2" NPT pressure/temperature relief valve for 6 and 11-gallon hot water heaters.Features:  Maximum PSI: 100 Threads: 1/2" NPT

Read more less

Design Marine Toilet Silent Electric - 12VDesign silent electric compact toilet with seperated flushing and waste disposal cycle. Including electronic 3 function control panel, before use, after use and short use plus a trimmer to regulate the flow rate.Water is from existing pressurized water system onboard with 12V solenoid valve (PN 07-66-030) or 12V flush pump (PN 07-66-032)- not included!Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Silent operation and low water consumption.Easy to clean white ceramic design bowl and white wooden seat. Robust, stable and compact with a preferred appearance like a home toilet.Specifications: Weight: 15.2 kg/39 lbs Dimensions: 405/15.9L x 410/16.14H x 340/13.4W mm/in  Type: Design Dual Operation Electric *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Color: White Size: Compact Size Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" or 1-1/2" Rinse Water: Fresh Volts: 12v Type: Toilet Box Dimensions: 15"H x 18"W x 18"L WT: 40.5 lbs UPC: 7340176601902

Read more less

Aqua Void 500 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency & Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with Switches Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 11.2 oz (0.32 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm) Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs UPC: 7330717015114 Quick Guide (pdf)

Read more less

Ultima Bilge PumpUltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve.The Ultima Bilge pumps may be manually operated via the Johnson Pump bilgecontrol panel.CE-ApprovedFeatures: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH Capacity straight (13.6 V): 64 l/min - 1000 GPH Amperage: 3.2 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz. Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 8"W x 9"L WT: 1.4 lbs UPC: 729321472609 Owner's Manual (pdf)

Read more less

Deck Scupper 90 Degree 1-1/2" Hose ConnectionFeatures: 90 Degree Barb Scuppers are installed flush with the deck and have a removable drain. #316 Stainless Steel Thru Deck Drain with Bronze Hose Connection 1-1/4" and 1-1/2" ID hose connections are offered in straight, 45 degree and 90 degree orientation.

Read more less

1/2" 5-Port Tank Selector ValveFeatures: For fuel or water Bottom port is common  Select between four outlets Full 1/2” flow Audible “click” at each handle position For thru panel mounting C83600 bronze construction Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 5"L WT: 1.95 lbs UPC: 742985173491

Read more less

Macerator Pump Housing KitJabsco Macerator Pump Housing Kit specifically for 18690.

Read more less

PRO+ Bulk BLE - Long Range for Over 4' TallThe PRO+ Sensor combines all the best technology of our ultrasonic sensing for the best sensor performance ever, using long-range Bluetooth communications to monitor tanks from the Mopeka App.  Approximately 3x the range of a normal Bluetooth sensor, this sensor is ideal for tanks located a long distance from the house. It can also be used in conjunction with a MopekaIoT Wifi Bridge to monitor tanks when outside of Bluetooth range.Features: Mopeka PRO+ Bulk Long Range Bluetooth Sensor For Storage Tanks Magnetically Attaches To Tank LP Gas Tank Monitor For Bulk tanks Battery Powered

Read more less

Replacement Blade for Ultimate 747 & 757 - BlackReplacement Blade specifically for Ultimate 747/757.Color: Black

Read more less

Replacement Blade for Sirocco - WhiteReplacement Blade specifically for Sirocco.Color: White

Read more less

1207R 1-1/8" Port - 90° BarbPort Fitting - 29mm (1-1/8") 90° Hose Barb

Read more less

Marine Elegance™The Marine Elegance is the ultimate in electric marine toilets. Offering the luxury of a full size seat in a one piece china bowl developed with a unique mounting system. It offers a super small footprint at just 8 ½” x 9 ¾”.  All toilets are now supplied with a slow close toilet seat that includes stops to help prevent the seat from shifting while in use during heavy seas. With the same Vortex-Vac technology also offered in the Atlantes Freedom, it creates a vacuum in the bowl, eliminating the need for extra vacuum generation equipment. Unlike typical vacuum toilet systems, a convenient, built-in shredder with stainless steel blades transforms waste into small particles to reduce clogs. The efficient action of the pump quickly and quietly pulls waste from the bowl with the ability to push the waste an amazing 10' vertically and 100' horizontally. Performing at a noise level less than 63 decibels it won’t alert everyone in the boat or on the dock that nature is calling. Benefits: Low water usage Small footprint for compact installation One piece vitreous china bowl Angled back for contoured fit Quiet operation Unmatched rinsing capabilities Low water consumption Built in shredder reduces clogs Can pump 10ft vertically, or 100ft horizontally Multi-Function Momentary Control:Provides momentary operation and independent momentary control of water and dischargeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Bone Gallons Per Minute: 3 GPM Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" Rinse Water: RAW Suction Lift (ft.): 4' Volts: 12v Type: Toilet Size: Household Size Box Dimensions: 18"H x 22"W x 24"L WT: 55 lbs UPC: 085462026225 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

TD200 BLE - LR 4' or Less Tall - Work with All Non-Pressurized FluidsWith the Mopeka TD200, you’ll be able to accurately measure the capacity of your non-pressurized Liquid Commodity Tanks … anywhere, anytime. The Mopeka TD200 Sensor will attach to the top of your tank and measure tanks to depths of 4’ (Feet). The sensor can be quickly calibrated on the Mopeka Tank Check or Mopeka Co-Pilot app to measure Water, Oil, Gas, Diesel, Chemicals, and other liquid commodities and beverages.*Installation will require a threaded 2″ port, or you must cut a hole 2″ (50.8mm) in diameter in the top of the tank at the chosen location.Features: The sensors work on Boosted Bluetooth. The average sensor’s battery life is 5 years*, so you don’t need to worry about continually changing the battery, and they’re replaceable. The latest in cloud-based software with our partner Amazon Web Services. The sensors are so accurate that they can read down to a .01 of an inch. The TD200 sensor is classified Class 1 Div 1 Easily select the liquid commodity you are measuring from the dropdown list in the “Tank Check” or “Co-Pilot” App 3-Year Warranty from the original date of purchase by the customer

Read more less

TD40 BLE - LR 4' to 18' Tall - Work with All Non-Pressurized FluidsSonar Tank Monitoring Solutions are the most reliable and accurate way to measure Propane, Butane, LPG, water, beverages, and other liquid volumes in both pressurized and non-pressurized tanks. The TD40 can work on tanks up to 16′ high and communicate via BLE (Long Range Bluetooth)*Installation will require a threaded 2″ port, or you must cut a hole 2″ (50.8mm) in diameter in the top of the tank at the chosen location.Features: The sensors work on Boosted Bluetooth. The average sensor’s battery life is 5 years*, so you don’t need to worry about continually changing the battery, and they’re replaceable. The latest in cloud-based software with our partner Amazon Web Services. The sensors are so accurate that they can read down to a .01 of an inch. The TD40 sensor is classified Class 1 Div 1 Easily select the liquid commodity you are measuring from the dropdown list in the “Tank Check” or “Co-Pilot” App 3-Year Warranty from the original date of purchase by the customer

Read more less

LCD Wireless Display for Pro Check, Universal, PRO200, Pro PlusThe Mopeka® LCD Display is the first and only remote LCD designed to seamlessly pair with up to two sensors, including the Pro Check, Universal, Pro200, and Pro Plus models. This compact display is both easy to use and highly portable, featuring a mounting bracket and built-in magnets, ensuring your sensors are always accessible when and where you need them. With a simple, rugged design, the Mopeka LCD Display delivers the precision and accuracy our customers expect.Boasting a battery life of up to 5 years and easily replaceable batteries, the Mopeka LCD Display allows you to control and configure your connected Mopeka sensors. You can switch between various commodities—such as water, oil, propane, diesel—and adjust screen time and brightness to suit your needs. The system also supports sensor configurations for both vertical and horizontal tanks, with preset options for tanks up to 1,000 gallons or an “Arbitrary” mode that lets you input custom tank dimensions, orientation, and volume.With the Mopeka LCD Display, you’ll always stay informed and in control.The display comes with 4 x CR2032 batteries that are pre-installed. To replace the batteries, remove the screws on the back of display and take off the backing cover. Place batteries double stacked, negative side down, on either side of the display. Ensure the batteries are secured in place. Replace the backing cover and screws.NOTE - The tank settings will default to 20 lb vertical propane tanks on start-up. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 4"L WT: 0.24 lbs

Read more less

ARG-750 Series 3/4" Raw Water Strainer with Non-Metallic Plastic BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D Specifications: Material: Plastic Box Dimensions: 5"H x 5"W x 10"L WT: 4.4 lbs UPC: 742985106871

Read more less

1-1/2" Ball Valve/Seacock & Raw Water Strainer ComboFeatures: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Space saving design with strainer and integral seacock Just one component to install and just one bilge location to access for winterization and maintenance No inside tie rods C84400 bronze construction Full flow ball valve with stainless steel ball and stem Strainer has screw on/off cap #304 stainless steel filter basket

Read more less

2" NPT #316 Stainless Steel In-Line Ball ValveFeatures: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves) Thumb-release locking mechanism assures the valve remains in the position selected 1000 WOG rated #316 SS body #304 SS handle and trim Bonding attachment PTFE seats and seals UL listed for fuel or water Full flow Fits IBVF-S for Seacock Application Specifications: Construction: Stainless Steel Box Dimensions: 7"H x 7"W x 15"L WT: 6.15 lbs UPC: 742985139831

Read more less