Par-Max HD6 Heavy Duty Water Pressure Pump - 12V - 6 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 9 lbs UPC: 671880841979 Brochure (pdf)

Read more less

LoPro 900GPH Bilge Pump - Non-AutomaticThe Rule LoPro™ 900 non-automatic is a low profile Bilge Pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4".It features a threaded discharge nozzle to which you can attach either a straight or a 90° fitting (included). In addition, you may use the tricuspid check valve {included} on the straight fitting to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose attached can also swivel 360° to route the hose perfectly. Features: 900 GPH Low Profile Bilge Pump Fits into hard to reach places Non-automatic, requires float and or panel switch to automate Threaded discharge ports with mulitiple fittings available Features a tricuspid check valve to minimize back flow of water WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Operation: Non-Automatic Gallons Per Minute: 15 GPM Gallons Per Hour: 900 GPH Type: Electric Box Dimensions: 4"H x 8"W x 10"L WT: 1.5 lbs UPC: 042237114365 Brochure (pdf)

Read more less

MegaPress 316 FKM 3/4" 90 Degree ElbowFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 4"L WT: 0.4 lbs

Read more less

MegaPress 316 FKM Tee - 2" x 2" x 2"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 6"W x 8"L WT: 2.6 lbs

Read more less

MegaPress 316 FKM 2" Coupling with StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 5"L WT: 1.3 lbs

Read more less

MegaPress 316 FKM 3/4" CapFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 3"L WT: 0.3 lbs

Read more less

SuperSwitch™ Float SwitchNow backed by a 5 year warranty, the non-mercury SuperSwitch is designed for the toughest applications. Design includes marine grade 14 gauge blocked wire, larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 Amps.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24/36v Type: Switches Box Dimensions: 3"H x 6"W x 8"L WT: 0.4 lbs UPC: 042237095497 Owner's Manual (pdf)

Read more less

MegaPress 316 FKM 1-1/4" UnionFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:AFM flat gasket, FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 7"L WT: 2.5 lbs

Read more less

Mini Accumulator TankPart #: 30573-0003This accumulator tank is intended for installation in any pumped water system controlled by a pressure switch, and may also be used with air-driven pumps. The tank can serve as a storage vessel as well as a pulsation dampener for pressurized fluid. The accumulator tank smoothes water flow and reduces on/off switch cycling of the pump by lessening the variation in pressure and flow between the pump and the system discharge points.The even flow of water gives better control of hot water temperature with systems using instant water heaters.Features: Internal bladder Smoother flow Quieter water system Longer pump life Easily fitted to new or existing systems Compact size Quick-connect/disconnect port flttings Mounting point for optional pressure switch Food grade materials, NSF Standard 18 listed Volume: 21.5 oz Dimensions: 8.4 x 4.7 inches Max Pressure: 125 psi Weight: 0.96 lb Pre charged pressure: 10 psiWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Accumulator/Pressure Tanks Box Dimensions: 5"H x 8"W x 12"L WT: 1.35 lbs UPC: 671880582834 Brochure (pdf)

Read more less

HotShot HD5 Heavy Duty Washdown Pump Kit with 25' HoseCoil - 12V - 5GPM - 70PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (heavy-duty) models include a wider diameter motor with a powder-coated shell, cast aluminum endbells, and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy-duty, motors and cast aluminum lower housings which allow for long life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions are available which include a 25' (7.6m) HoseCoil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hose barb and GHT fittings 90° 20 mesh Quick Connect strainer Trigger nozzle & Quick Connect hose adapters

Read more less

500GPH Standard Bilge Pump - 24VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 500GPH pump will produce this flow at just 24V rather than 27.2V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104748 Brochure (pdf)

Read more less

MegaPress 316 FKM 1" CapFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 3"L WT: 0.5 lbs

Read more less

1-1/8" Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix - Sold by the FootTrident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required. Features: Sold by the foot Flexible, but the 147 series is less flexible than the 149 series of hoses Application:Bilge and live well hoseSpecifications: Tube & Cover: Clear vinyl reinforced with black helix  Color: Clear with black helix Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-49°C)  Inner Diameter: (inch) 1-1/8" / (mm) 28.6 Outer Diameter: (inch) 1.39" / (mm) 35.4 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.45 Bend Radius: (inch) 3.5" / (mm) 8.9 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/8" Length (Feet): Sold By The Foot Box Dimensions: 2"H x 2"W x 2"L WT: 0.28 lbs Quick Guide (pdf)

Read more less

High Flow Dual Pump System - 24 VDC - 10.0 GPMThe most advanced system available. This fully-automatic, quiet unit delivers water smoothly and consistently.Features: Replaces 5907 System Delivers up to 10 GPM at Open Flow Includes the AQUA KING II Supreme 5.0 Pump and PRO BLASTER II Ultimate 5.0 Pump 24 VDC 55 PSI Shut-off Pressure Built to Withstand the Harsh Marine Environment with Electro-Coated Motor, O-ring Seals and Fully-Sealed Wire Entries This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 24v Max PSI: 55 Gallons Per Minute: 10 GPM Box Dimensions: 7"H x 7"W x 24"L WT: 16.1 lbs

Read more less

MegaPress 316 FKM 1-1/2" Coupling with StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 5"L WT: 1 lbs

Read more less

Shower Drain Box with 800 GPH Pump - 24VThis compact, full-capacity shower drain system provides 800 GPH (3028 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer. Specifications: Type: Shower Drains Gallons Per Hour: 800 GPH Volts: 24v Box Dimensions: 6"H x 10"W x 14"L WT: 4.2 lbs UPC: 042237106568

Read more less

DC 150 CFM Flangemount 3" BlowersFeatures: Tough Reinforced Plastic Housing Mount to any surface Slip-On Inlet and Outlet Ducting Connection Efficient High Volume Air Flow Low Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted DC Models comply with USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection DC Models comply with Complies with ISO 9097 MARINE WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 3" Open Flow (CFM): 150 CFM Volts: 24v Box Dimensions: 6"H x 8"W x 9"L WT: 4.2 lbs UPC: 671880029377 Owner's Manual (pdf)

Read more less

MegaPress 316 FKM 1-1/2" UnionFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:AFM flat gasket, FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 7"L WT: 2.5 lbs

Read more less

MegaPress 316 FKM Tee - 1-1/2" x 1-1/2" x 1-1/2"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 5"W x 7"L WT: 1.9 lbs

Read more less

MegaPress 316 FKM 1-1/4" CapFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 3"L WT: 0.6 lbs

Read more less

MegaPress 316 FKM 2" CapFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 3"L WT: 0.95 lbs

Read more less

MegaPress 316 FKM 1-1/2" CapFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 3"L WT: 0.7 lbs

Read more less

MegaPress 316 FKM 3/4" UnionFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:AFM flat gasket, FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 5"L WT: 1.05 lbs

Read more less

MegaPress 316 FKM Reducer - 1-1/2" x 1-1/4"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 5"L WT: 1.1 lbs

Read more less

MegaPress 316 FKM Tee - 1" x 1" x 1"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 3"W x 5"L WT: 1 lbs

Read more less

MegaPress 316 FKM 1/2" UnionFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:AFM flat gasket, FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 5"L WT: 0.7 lbs

Read more less

Control Silent Electric Toilet Rocker Switch2 function rocker switch control panel 12/24V for waste disposal and flushing. Features:Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance 

Read more less

MegaPress 316 FKM FPT Adapter - 3/4" x 3/4" (FPT)Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, female pipe thread Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 3"L WT: 0.3 lbs

Read more less

MegaPress 316 FKM FPT Adapter - 1/2" x 1/2" (FPT)Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, female pipe thread Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 3"L WT: 0.3 lbs

Read more less

MegaPress 316 FKM Reducer - 1" x 3/4"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 2"W x 4"L WT: 0.5 lbs

Read more less

MegaPress 316 FKM 3/4" Slip Coupling without StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 3"L WT: 0.3 lbs

Read more less

MegaPress 316 FKM 1/2" Slip Coupling without StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 3"L WT: 0.25 lbs

Read more less

MegaPress 316 FKM MPT Adapter - 3/4" x 1/2" (MPT)Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, male pipe thread Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 2"W x 2"L WT: 0.3 lbs

Read more less

MegaPress 316 FKM 1-1/2" Slip Coupling without StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 5"L WT: 1 lbs

Read more less

MegaPress 316 FKM 1/2" CapFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 2"L WT: 0.2 lbs

Read more less

MegaPress 316 FKM 1-1/4" Slip Coupling without StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 5"L WT: 0.85 lbs

Read more less

MegaPress 316 FKM Reducer - 2" x 1-1/2"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 6"L WT: 1.3 lbs

Read more less

MegaPress 316 FKM MPT Adapter - 1-1/4" x 1-1/4" (MPT)Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, male pipe thread Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 4"L WT: 0.8 lbs

Read more less

MegaPress 316 FKM Reducer - 1-1/4" x 1"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 5"L WT: 0.8 lbs

Read more less

MegaPress 316 FKM Reducer - 3/4" x 1/2"Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 4"L WT: 0.35 lbs

Read more less

MegaPress 316 FKM 3/4" Coupling with StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 3"L WT: 0.3 lbs

Read more less

MegaPress 316 FKM 1" Slip Coupling without StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 4"L WT: 0.5 lbs

Read more less

MegaPress 316 FKM FPT Adapter - 2" x 2" (FPT)Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, female pipe thread Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 4"L WT: 1.3 lbs

Read more less

MegaPress 316 FKM 1/2" Coupling with StopFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings  Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 3"L WT: 0.3 lbs

Read more less

MegaPress 316 FKM 1/2" 90 Degree Street ElbowFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, street Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 4"L WT: 0.4 lbs

Read more less

MegaPress 316 FKM 1-1/2" 90 Degree Street ElbowFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, street Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 7"L WT: 1.5 lbs

Read more less

MegaPress 316 FKM 1-1/2" 45 Degree Street ElbowFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection, street Components:FKM sealing element, grip ring, separator ring Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 6"L WT: 1.2 lbs

Read more less

MegaPress 316 FKM 1/2" 90 Degree ElbowFeatures: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components:FKM sealing elements, grip rings, separator rings Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 3"L WT: 3.5 lbs

Read more less