Show previous products

• 

  View options

  Navpod Navpod AG127 Angleguard 9.5" Wide 1.25" Tube Double Bend

  Angle Guards are designed to upgrade sailboats steering systems and accommodate mounting of electronics onto NavPods. For a clean and secure method of concealing wires and to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter Angleguards. NavPods supplies Polished Stainless Steel feet with all 1.25" AngleGuards.

  Read more less

  $420.48

  View options

• 

  View options

  Navpod Navpod AG126 Angleguard 9.5" Wide 1.25" Tube Double Bend

  Angle Guards are designed to upgrade sailboats steering systems and accommodate mounting of electronics onto NavPods. For a clean and secure method of concealing wires and to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter Angleguards. NavPods supplies Polished Stainless Steel feet with all 1.25" AngleGuards.

  Read more less

  $420.48

  View options

• 

  View options

  Navpod Navpod AG118 Angleguard 9.5" Wide 1.25" Tube Single Bend

  Angle Guards are designed to upgrade sailboats steering systems and accommodate mounting of electronics onto NavPods. For a clean and secure method of concealing wires and to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter Angleguards. NavPods supplies Polished Stainless Steel feet with all 1.25" AngleGuards.

  Read more less

  $411.71

  View options

• Sale -$71.00

  Quantity Add to cart

  NavPod NavPod PED5100-01 PedestalPod Pre-Cut f/Humminbird HELIX 10 HELIX 9 Series - Carbon Black [PED5100-01-C]

  PED5100-01 PedestalPod Pre-Cut f/Humminbird HELIX 10 & HELIX 9 Series - Carbon BlackPedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Deck Box Dimensions: 10"H x 17"W x 28"L WT: 8 lbs UPC: 659988113372

  Read more less

  $489.99 $418.99

  Quantity Add to cart

• Sale -$58.00

  Quantity Add to cart

  NavPod NavPod SuperSailPod Uncut f/4 Instruments & Up To A 9" MFD f/12" Wide Guard [NPT2000]

  SuperSailPod Uncut f/4 Instruments & Up To A 9" MFD f/12" Wide GuardSuper SailPod Series is used for mounting 8" and 9" Chartplotters plus 4 instruments. The Super SailPod needs an angle flat length of at least 15"All SailPod's Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets Sizing Chart:Top Usable Face: 9"H x 13"W x 5.25"D Max Cut-Out: 9"H x 10.5"W Bottom: Usable Face: 4.5"H x 20.25"W x 2.5"D Max Cut-Out: 4.5"H x 20.25"W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 13"W x 9"H (Upper Section); 20.25"W x 4.5"H (Lower Section) Box Dimensions: 9"H x 19"W x 24"L WT: 11.1 lbs UPC: 659988105193

  Read more less

  $399.99 $341.99

  Quantity Add to cart

• Sale -$52.00

  Quantity Add to cart

  NavPod NavPod GP2500 SystemPod Uncut f/12" Wide Guard [GP2500]

  GP2500 SystemPod Uncut for 12" Wide GuardGP2500 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Sizing:Usable Face: 15"W x 6"HAll SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensionsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Usable Face: 15"W x 6"H Mounting Style: Pedestal Cut/Uncut: Uncut Box Dimensions: 7"H x 10"W x 19"L WT: 5.6 lbs UPC: 659988108002 Quick Guide (pdf)

  Read more less

  $359.99 $307.99

  Quantity Add to cart

• Sale -$62.00

  View options

  NavPod NavPod GP2050 SailPod Uncut f/12" Guard [GP2050]

  Part #: GP2050Description: UncutNavPod Protects Your Electronics In HarshConditionsUncut Flush FrontUsable Face = 12.75"w x 8.75"h Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (15.125"w x 10.88"h x 6.125"d) Centimeters (38.42w x 27.62h x 15.56d).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 12.75"W x 8.75"H Box Dimensions: 9"H x 13"W x 17"L WT: 6.1 lbs UPC: 659988103137

  Read more less

  $429.99 $367.99

  View options

• Sale -$64.00

  View options

  NavPod NavPod GP1040 SailPod Uncut f/9.5" Pedestal Guards [GP1040]

  PART #: GP1040 Description: Uncut (usable face = 17.5"w x 7.375"h) W x H x D: 20.25" x 9.5" x 6.125" NavPod Protects Your Electronics In Harsh ConditionsUn-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.Watertight Silicone SealKeeps rain and salt water spray off electrical connections on the back of electronicsTamperproofSpecial fasteners and wrench are included that provide security and convenience to leave electronics on-boardConcealed WiringNo loose wires are exposed to corrosion and UV damageClean InstallationThe clean look of flush mounting. Mount your display where you can best see and reach it.Pre-Cut ModelsCome with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Usable Face: 17.5"W x 7.35"H Mounting Style: Pedestal Cut/Uncut: Uncut Box Dimensions: 8"H x 12"W x 23"L WT: 6.9 lbs UPC: 659988102574

  Read more less

  $439.99 $375.99

  View options

• Sale -$74.00

  View options

  NavPod NavPod PowerPod Pre-Cut f/Garmin GPSMAP 8412xsv/8612xsv [PP5050-33]

  PowerPod Pre-Cut for Garmin GPSMAP 8412xsv/8612xsv PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Dash Cut/Uncut: Cut Box Dimensions: 9"H x 15"W x 17"L WT: 7.65 lbs UPC: 659988120813

  Read more less

  $509.99 $435.99

  View options

• Sale -$71.00

  View options

  NavPod NavPod PowerPod Pre-Cut f/Garmin GPSMAP 923, 923xsv, 943 943xsv [PP4800-14]

  PowerPod Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 & 943xsvPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $489.99 $418.99

  View options

• Sale -$72.00

  View options

  NavPod NavPod SailPod Precut 15.18W x 9.85H (38.6cm W x 25cm H) f/Garmin GPSMAP 1223/1243xsv - 9.5 Wide Guard [GP1200-20]

  SailPod Uncut Usable Face 15.18″w x 9.85″h (38.6cm w x 25cm h) for Garmin GPSMAP® 1223/1243xsv - 9.5″ Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $499.99 $427.99

  View options

• Sale -$65.00

  View options

  NavPod NavPod SailPod Pre-Cut f/Garmin 8612xsv/8412xsv f/9.5" Wide Guard [GP1050-33]

  SailPod Pre-Cut for Garmin 8612xsv/8412xsv for 9.5" Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips… “Where you need it, when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 8"H x 12"W x 17"L WT: 5.4 lbs UPC: 659988120356 Quick Guide (pdf)

  Read more less

  $449.99 $384.99

  View options

• Sale -$71.00

  Quantity Add to cart

  NavPod NavPod PowerPod Pre-Cut f/Garmin GPSMAP 8410xsv/8610xsv [PP4800-10]

  PowerPod Pre-Cut for Garmin GPSMAP 8410xsv/8610xsv PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Dash Cut/Uncut: Cut Box Dimensions: 9"H x 13"W x 14"L WT: 5.8 lbs UPC: 659988120776

  Read more less

  $489.99 $418.99

  Quantity Add to cart

• Sale -$65.00

  View options

  NavPod NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5 Wide Guard [GP1050-15]

  SailPod Pre-Cut for Raymarine AXIOM 12 for 9.5″ Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 8"H x 12"W x 17"L WT: 5.1 lbs UPC: 659988114430

  Read more less

  $449.99 $384.99

  View options

• Sale -$65.00

  View options

  NavPod NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12 Wide Guard [GP2050-16]

  SailPod Pre-Cut for Raymarine AXIOM 9 f/12″ Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 8"H x 11"W x 16"L WT: 5.8 lbs UPC: 659988114591

  Read more less

  $449.99 $384.99

  View options

• Sale -$72.00

  View options

  NavPod NavPod SailPod Pre-Cut f/Simrad NSS12 evo BG Zeus 12 f/9.5" Wide Guard [GP1200-14]

  SailPod Pre-Cut for Simrad NSS12 evo³ & B&G Zeus³ 12 for 9.5" Wide GuardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to QualityWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 8"H x 11"W x 17"L WT: 5.8 lbs UPC: 659988113785

  Read more less

  $499.99 $427.99

  View options

• Sale -$64.00

  View options

  NavPod NavPod GP1900-01 SailPod Pre-Cut f/Raymarine Axiom Pro 9/Axiom 2 Pro 9/eS95/eS97/eS98 f/9.5" Wide Guard [GP1900-01]

  GP1900-01 SailPod Pre-Cut for Raymarine Axiom Pro 9/Axiom 2 Pro 9/eS95/eS97/eS98 for 9.5" Wide GuardGP1900 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.All SailPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 7"H x 9"W x 14"L WT: 4.3 lbs UPC: 659988110784

  Read more less

  $439.99 $375.99

  View options

• Sale -$75.00

  View options

  NavPod NavPod PP5200 PowerPod Uncut [PP5200]

  PP5200 PowerPod Uncut PP5200 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.Sizing: Usable face: 9.85"H x 15.18"W All PowerPods Include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Swivel Base with large pass-through for wire harness This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Usable Face: 15.18"W x 9.85"H Mounting Style: Dash Cut/Uncut: Uncut Box Dimensions: 11"H x 16"W x 17"L WT: 10.3 lbs UPC: 666285222522

  Read more less

  $519.99 $444.99

  View options

• Sale -$55.00

  Quantity Add to cart

  NavPod NavPod GP1301 InstrumentPod Precut w/3-3.6" Holes f/9.5" Guard [GP1301]

  GP1301 InstrumentPod Precut w/3-3.6" Holes f/9.5" GuardNavPod's InstrumentPod GP1301 for 9.5" Guard is used for mounting three instruments in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 6"H x 8"W x 18"L WT: 4 lbs UPC: 659988107838

  Read more less

  $379.99 $324.99

  Quantity Add to cart

• Sale -$55.00

  View options

  NavPod NavPod AG218 12" Wide AngleGuard - Single Bend - 1.25" Diameter [AG218]

  AG218 12" Wide AngleGuard - Single Bend - 1.25" DiameterPart #: AG218NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Sailpod sold separately Features: 1.25" Diameter Single Bend 12" Angled Flat Length 1.25" Tubing Diameter 12" Center to Center All 1.25” include stainless steel feet (1” does not include feet) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $469.99 $414.99

  View options

• Sale -$51.00

  View options

  NavPod NavPod AG18 9.5" Wide AngleGuard - Single Bend - 1" Diameter [AG18]

  AG18 9.5" Wide AngleGuard - Single Bend - 1" DiameterPart #: AG18NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Sailpod sold separately Features: 1" Diameter Single Bend 9.5" Center to Center 12" Angled Flat Length This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $429.99 $378.99

  View options

• Sale -$55.00

  View options

  NavPod NavPod SG10 Pedestal Guard [SG10]

  SG10 Pedestal Guard SG10 StraightGuard has no bends and is designed to fit a single InstrumentPod. 1” diameter stainless steel tubes. No feet included on 1″ StraightGuards.Features: 316 grade stainless steel 065 gauge wall thickness Mirror polished finish All 1.25” include stainless steel feet (1” does not include feet) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $379.99 $324.99

  View options

• Sale -$29.00

  Quantity Add to cart

  NavPod NavPod TP125 Top Plate Adaptor [TP125]

  PART #: TP125 Description: Top Plate Adaptor for 1.25" AngleGuard on Edson Steering System W x H x D: 9.5" x 9.5" x 1.25" NavPod Protects Your Electronics In Harsh ConditionsTop Place AdaptorNavPod AngleGuards are designed to upgrade sailboat steering systems to accommodate mounting of electronics onto NavPods.Edson is a popular manufacturer of steering systems who has always used a 9.5" wide pedestal guard. Most of their pedestal guards are 1" in diameter. Lewmar (formally Whitlock) also has manufactured steering systems that use the 9.5" wide format. NavPod supplies the SG10 and AG10 as a easy retrofit onto either of these systems.Because of the clean and secure method of concealing wires and the need to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter AngleGuards. Often the existing Top Plate needs to be bored out or replaced with the TP125 to accommodate the larger diameter. NavPod supplies Polished Stainless Steel feet with all 1.25" AngleGuards.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $199.99 $170.99

  Quantity Add to cart

• Sale -$65.00

  Quantity Add to cart

  NavPod NavPod SailPod Pre-Cut f/Raymarine Axiom 12 Axiom+ 12 f/12 Wide Guard (Pre-Cut f/Surface Mount Using Rear Mounting Brackets) [GP2050-15]

  SailPod Pre-Cut for Raymarine Axiom 12 & Axiom+ 12 for 12″ Wide Guard (Pre-Cut for Surface Mount Using Rear Mounting Brackets)SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $449.99 $384.99

  Quantity Add to cart

• Sale -$82.00

  Quantity Add to cart

  NavPod NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/BG Zeus3 9 Fits 1" or 1.25" Tubing [RMX4600-06]

  RailMount Pre-Cut for Simrad NSS9 evo3/B & G Zeus3 9 Fits 1" or 1.25" TubingRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1” or 1.25” diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal – All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Rail Box Dimensions: 8"H x 12"W x 17"L WT: 6.7 lbs UPC: 659988114393 Quick Guide (pdf)

  Read more less

  $569.99 $487.99

  Quantity Add to cart

• Sale -$71.00

  Quantity Add to cart

  NavPod NavPod PowerPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/1022 [PP4900-11]

  PowerPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Dash Cut/Uncut: Cut Box Dimensions: 9"H x 15"W x 17"L WT: 6.5 lbs UPC: 659988114294

  Read more less

  $489.99 $418.99

  Quantity Add to cart

• Sale -$80.00

  View options

  NavPod NavPod PowerPod Pre-Cut f/Garmin GPSMAP 8416xsv/8616xsv [PP5030-02]

  PowerPod Pre-Cut for Garmin GPSMAP 8416xsv/8616xsvPowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Dash Cut/Uncut: Cut Box Dimensions: 10"H x 17"W x 19"L WT: 9.25 lbs UPC: 659988120790

  Read more less

  $549.99 $469.99

  View options

• Sale -$78.00

  View options

  NavPod NavPod PowerPod Pre-Cut f/Simrad NSS12 evo BG Zeus 12 [PP5200-14]

  PowerPod Pre-Cut for Simrad NSS12 evo³ & B&G Zeus³ 12PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods – Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Dash Box Dimensions: 9"H x 15"W x 17"L WT: 7.85 lbs UPC: 659988114331

  Read more less

  $539.99 $461.99

  View options

• Sale -$62.00

  View options

  NavPod NavPod GP1800-07 SailPod Pre-Cut f/Raymarine AXIOM 9 f/9.5" Wide Guard [GP1800-07]

  SailPod Pre-Cut f/Raymarine AXIOM 9 f/9.5" Wide Guard(Pre-Cut is for Surface Mount using rear mounting brackets)GP1800 Series for 9.5" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen.  A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Gen3 Family FeaturesThe Hi-Gloss MaterialNavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.The Waterproof SealAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.The Nickel Chrome Plated ScrewsWe use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!The Manufacturing ProcessHeavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. For 2015 we have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.Our Commitment to QualityWe are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 7"H x 10"W x 14"L WT: 3.8 lbs UPC: 659988114539

  Read more less

  $429.99 $367.99

  View options

• Sale -$62.00

  Quantity Add to cart

  NavPod NavPod GP1800-13 SailPod Pre-Cut f/Simrad GO9/BG Vulcan 9 f/9.5" Wide Guard [GP1800-13]

  GP1800-13 SailPod Pre-Cut for Simrad GO9/B&G Vulcan 9 for 9.5" Wide GuardGP1800 Series for 9.5" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.The Hi-Gloss MaterialNavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.The Waterproof SealAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.The Nickel Chrome Plated ScrewsWe use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!The Manufacturing ProcessHeavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.Our Commitment to QualityWe are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 7"H x 10"W x 14"L WT: 4.1 lbs UPC: 659988113600

  Read more less

  $429.99 $367.99

  Quantity Add to cart

• Sale -$65.00

  View options

  NavPod NavPod GP1600 SystemPod Uncut f/9.5" Wide Guard [GP1600]

  GP1600 SystemPod Uncut for 9.5" Wide GuardGP1600 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Usable Face: 19.75"W x 6"HAll SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensionsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Usable Face: 19.75"W x 6"H Mounting Style: Pedestal Cut/Uncut: Uncut Box Dimensions: 7"H x 12"W x 22"L WT: 6.8 lbs UPC: 659988108071 Quick Guide (pdf)

  Read more less

  $449.99 $384.99

  View options

• Sale -$52.00

  View options

  NavPod NavPod GP1500 SystemPod Uncut f/9.5" Wide Guard [GP1500]

  GP1500 SystemPod Uncut for 9.5" Wide GuardGP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.A SystemPod is best mounted on a Single Bend AngleGuards.SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.Usable Face for Uncut15"W x 6"H*See Literature tab for an image with dimensionsThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Usable Face: 15"W x 6"H Mounting Style: Pedestal Cut/Uncut: Uncut Box Dimensions: 7"H x 10"W x 19"L WT: 5.6 lbs UPC: 659988107937 Quick Guide (pdf)

  Read more less

  $359.99 $307.99

  View options

• Sale -$65.00

  Quantity Add to cart

  NavPod NavPod AG27 9.5" Wide AngleGuard - Double Bend - 1" Diameter [AG27]

  AG27 9.5" Wide AngleGuard - Double Bend - 1" DiameterPart #: AG27NavPod Protects Your Electronics In Harsh ConditionsInstrumentPods and SailPods can be mounted together on a double bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.Sailpod sold separately Features: 9.5" Center to Center 1" Diameter Double Bend 10" Angled Flat Length 8" Upper Vertical Flat Length This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $449.99 $384.99

  Quantity Add to cart

• Sale -$81.00

  View options

  NavPod NavPod StarPod 3 System f/Starlink Gen3 Standard Dish *Starlink Dish Not Included [SPS3000]

  StarPod 3 System for Starlink Gen3 Standard Dish *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board large boats with a hardtop, radar arch, or other flat mounting surface. The waterproof housing incorporates a 10-degree polyethylene wedge that is CNC routed to fit the internal swivel tube and allows the dish to be rotated to optimize the view of Starlink satellites if necessary. The angle also facilitates rainwater runoff that can degrade a signal if water accumulates on a flat-mounted Starlink dish. The StarTower base is solidly built with 8 mm thick aluminum and powder coated with a high gloss white finish. The bottom base of the StarTower measures 7″ square.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of the signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The kickstand base that comes with a Starlink Gen3 Standard dish is not utilized when mounting inside a StarPod; only the dish itself is used. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup/installation guide for this process). Once the initial Starlink setup process is complete, the dish can be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).Features: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for matching to the NavPod wrench for better holding ability when tightening. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. Specifications: Starlink Gen3 Standard dish; 23.04 x 15.07″ dish size Starlink Dish Not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $799.99 $718.99

  View options

• Sale -$1.00

  Quantity Add to cart

  NavPod NavPod TPK300 Tamperproof Wrench Set [TPK300]

  Part #: TPK300NavPod Protects Your Electronics In HarshConditionsTamper-Proof Wrench SetAvailable in 2.5", 6" and 6" T Handle.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $24.99 $23.99

  Quantity Add to cart

• Sale -$55.00

  Quantity Add to cart

  NavPod NavPod AG118 Pedestal Guard [AG118]

  AG118 Pedestal Guard Single Bend AngleGuard 9.5″ Wide by 1.25″ diameter for all SailPods and SystemPods.Features: 316 grade stainless steel 065 gauge wall thickness Mirror polished finish All 1.25” include stainless steel feet (1” does not include feet) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Read more less

  $469.99 $414.99

  Quantity Add to cart

Back to top