FREE SHIPPING ON ORDERS OVER $100.0 Dollars!

  • Sale -$45.01 Newmar 1-3-70 Battery Isolator [1-3-70]

    Newmar Power Newmar 1-3-70 Battery Isolator [1-3-70]

    1-3-70 Battery IsolatorThis heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems. Features: Conservatively rated diodes and a rustproof anodized aluminum heat sink case. Heavy-duty construction Rated for systems up to 48 volts DC, negative ground Rust-proof anodized aluminum case Stainless steel mounting hardware is provided Protective covers are provided for terminals Specifications: Alternator Sources: 1 Battery Bank: 3     Max. Amperage Input Capacity: 70 Stud Terminal Size: 6mm     Dimensions (L x W x H): 3.25 x 4.5 x 3.1 inches Weight: 2 lbs. Operating Temperature: -40 to +80 degrees Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C. Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling) Voltage Drop: 0.7V @ 50% load, 0.9V @ full load *Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configurationThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

    $240.00 $194.99

  • Sale -$56.01 Newmar SS Switch - 7.5 AC Selector Switch [SS SWITCH7.5]

    Newmar Power Newmar SS Switch - 7.5 AC Selector Switch [SS SWITCH7.5]

    SS Switch - 7.5 AC Selector SwitchThis AC source selector switch is an essential item for any vessel with an onboard AC generator and/or inverter. By isolating power source inputs, the switch eliminates the safety hazard and/or damage that can occur if two AC sources are applied to the same circuit simultaneously.The switch is fitted with a compact escutcheon plate with engraved switch position nomenclature.The switches carry cUL approval, are CE-marked, and feature heavy-duty contacts and a positive step cam mechanism for low-resistance contact closure. Features:Maybe rear-mounted in a panel with a thickness of up to 1/4”Specifications: Amperage @ 115/230V: 63 Number of Poles: 2 Switch Positions: 2 + “OFF” Standard Plate Markings: SHIP-OFF-SHORE     Depth Dimensions: 2-3/8 in.

    $236.00 $179.99

  • Sale -$41.01 Newmar 1-2-120 Battery Isolator [1-2-120]

    Newmar Power Newmar 1-2-120 Battery Isolator [1-2-120]

    1-2-120 Battery IsolatorThis heavy-duty isolator allows multiple batteries to charge automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt, negative ground DC systems. This model is a 120-amp alternator.Features: Conservatively rated diodes and a rustproof anodized aluminum heat sink case Heavy duty construction Rated for systems up to 48 volts DC, negative ground Rust-proof anodized aluminum case Stainless steel mounting hardware provided Protective covers provided for terminals Specifications: Operating Temperature: -40 to +80° Duty Cycle: Continuous rating to 50° C Derate linearly to 70% @ 80° C Temp. Rise: 5° C at full rated current (mount vertically for optimum cooling) Voltage Drop: 0.7V @ 50% load, 0.9V @ full load Alternator Sources: 1 Battery Bank: 2 Max. Amperage Input Capacity: 120 Stud Terminal Size: 6mm Dimensions (L x W x H): 6.5" x 4.5" x 3.1" Weight: 3 lbs. Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration

    $216.00 $174.99

  • Sale -$37.01 Newmar 24-12-3 DC Converter [24-12-3]

    Newmar Power Newmar 24-12-3 DC Converter [24-12-3]

    24-12-3 DC ConverterConvert 17-32 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features: Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating The heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments Numerous Converter and Load Protection Circuits: Current limiting Automatic thermal shutdown Short circuit proof Reverse polarity Overvoltage protection Carries CE mark Specifications: Input Voltage: 17-32 Output Voltage: 13.6 Output Amps (Intermittent): 3 Output Amps (Continuous): 3 Case Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters) Weight: 1 lb. (.45 kg) Output: 13.6 VDC (internally adjustable 12.6 -14.5)  Ripple: 150 mV P-P maximum Regulation: 1% Line/Load Switching Frequency: 40 kHz Efficiency: 85% – Typical. Isolation: Output/Chassis; Input/chassis: 250 VDC Duty Cycle Ratings*: Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating. Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time Idle Current: Less than 100 mA (including power “ON” light) Operating Temp Specifications: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature Model 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C Mechanical Specifications: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal coated PC board Options:Operation as battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $199.00 $161.99

  • Sale -$35.01 Newmar ERC-12-15 Emergency Relay [ERC-12-15] Newmar ERC-12-15 Emergency Relay [ERC-12-15]

    Newmar Power Newmar ERC-12-15 Emergency Relay [ERC-12-15]

    ERC-12-15 Emergency RelayThe Emergency Relay/Charger is a device for assuring immediate backup power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition, it will allow the power supply to act as a “trickle” battery charger without any additional modification.When loss of DC voltage is sensed by the ERC, it employs a fast-acting S.P.D.T. relay to automatically switch the equipment’s DC input over to a standby battery to allow continued operation. When the power supply is returned to service, the ERC disengages the battery and puts the supply back online to provide DC voltage. While the power supply is operating normally, a small portion of the output current is directed to the battery to trickle-charge and maintain it at full voltage. (Note: Battery float voltage will be maintained at .7 volts lower than the power supply voltage.)Note: If the power supply is down for an extended period, the backup battery may become significantly discharged while powering the radio. When the supply returns to service, the trickle charge rate of the ERC may be insufficient to restore the battery to full charge in a timely manner. In the event this occurs, a supplemental charger may be necessary to bring the battery to full charge.InstallationSelect a suitable location as close to the battery as possible where there is no likelihood of accidental contact and shorting of the terminals. The ERC may be mounted vertically, horizontally, or even upside-down, if necessary, without affecting its operation. Two # 10 sheet metal or wood screws will be needed. Mounting on a metal surface is acceptable as the inputs and outputs are isolated from the mounting bracket.Note: If the battery is stored in an unventilated enclosure, it is not recommended that users mount the ERC within the same enclosure. As with any relay, it should not be in an area where there may possibly be battery gases or any other potentially explosive gases present.WiringThe wiring should be as direct as possible. Ensure that the battery posts are free from corrosion. Determine the correct gauge wire using the information below. The wire length is the total length of the run (ERC-to-Radio + Power Supply-to-ERC) or (ERC-to-Radio + Battery-to-ERC), whichever is longer. 5 ft. wire length = #14 AWG 10 ft. wire length = #12 AWG 15 ft. wire length = #10 AWG 20 ft. wire length = #10 AWG Use the provided crimp ring lug connectors to secure wiring to the ERC. Models ERC-12-15 and ERC-24-15 are provided with yellow plastic terminal covers, which must be reinstalled after wiring to prevent accidental shorting.Specifications: Input Range: 10.0-14.5 VDC (12V) Relay Rating: 10 amps continuous & 15 amps intermittent Float Trickle (typical): 0.1 amps Dimensions (inches): 5-1/8" x 2-7/8" x 2-3/8" Weight: 0.5 lbs. Owner's Manual (pdf)

    $189.00 $153.99

  • Sale -$31.01 Newmar APS-70 Automatic Power Selector - 70A [APS-70]

    Newmar Power Newmar APS-70 Automatic Power Selector - 70A [APS-70]

    APS-70 Automatic Power Selector - 70AThe Automatic Power Selector (APS) is a solid-state device that enables the installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two independent DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, and the operation continues uninterrupted.Two independent power sources are wired to the APS and routed as a single output to the vital load. Alarm sense wires can be easily attached to input studs, providing a loss of power source signal. Features: Easy installation Rugged, rust-proof anodized aluminum case Specifications: Max Loads: 70 amps Voltage Rating: 6 – 50 VDC, neg. ground Stud Terminal Size: 6mm Dimensions (inches): 3.25 x 4.5 x 3.1 Weight (lbs): 2 Quick Guide (pdf)

    $168.00 $136.99

  • Sale -$30.01 Newmar AC-II Panel [AC-II]

    Newmar Power Newmar AC-II Panel [AC-II]

    AC-II PanelEssential control and protection whenever AC from shore power or generators is on board. A double-pole master breaker with a power-on indicator light protects both the hot and neutral legs of the AC circuit. A reverse polarity light provides a clear warning when wiring is reversed and poses a shock hazard.AC-II has a 30 Amp master breaker (15A or 50A* optional). Specifications: Cut-Out Dimensions: 4 x 2.5 inches (10.2 x 6.4 centimeters) Weight: 1 lb. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Max Breaker Quantity: 5 Box Dimensions: 6"H x 7"W x 9"L WT: 1 lbs

    $160.00 $129.99

  • Sale -$29.01 Newmar GS-2-25 Grounding Strap - 2" x 25' [GS-2-25]

    Newmar Power Newmar GS-2-25 Grounding Strap - 2" x 25' [GS-2-25]

    GS-2-25 Grounding Strap - 2" x 25'This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.Features: Flexible (easily conforms to vessel contours) .01 in. (25mm) thick Specifications: Width (in./cm): 2/5.1 Length (ft./m): 25/8 Weight (lbs/kg): 3/1.4

    $157.00 $127.99

  • Sale -$29.01 Newmar BB-8 Bus Bar [BB-8]

    Newmar Power Newmar BB-8 Bus Bar [BB-8]

    BB-8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 8 Size (inches): 9-1/16” x 1-1/2”

    $156.00 $126.99

  • Sale -$38.01 Newmar SS Switch - 3 AC Selector Switch [SS SWITCH3]

    Newmar Power Newmar SS Switch - 3 AC Selector Switch [SS SWITCH3]

    SS Switch - 3 AC Selector SwitchThis AC source selector switch is an essential item for any vessel with an on-board AC generator and/or inverter. By isolating power source inputs, the switch eliminates the safety hazard and/or damage that can occur if two AC sources are applied to the same circuit simultaneously.The switch is fitted with a compact escutcheon plate with engraved switch position nomenclature.The switches carry cUL approval, are CE-marked, and feature heavy-duty contacts and a positive step cam mechanism for low-resistance contact closure. Features:May be rear-mounted in a panel with a thickness up to 1/4”Specifications: Amperage @ 115/230V: 30   Number of Poles: 2 Switch Positions: 2 + “OFF” Standard Plate Markings: SHIP-OFF-SHORE     Depth Dimensions: 2-1/8 in.

    $163.00 $124.99

  • Sale -$29.01 Newmar ACCY-IBX Blank Panel [ACCY-IBX]

    Newmar Power Newmar ACCY-IBX Blank Panel [ACCY-IBX]

    ACCY-IBX Blank PanelThis versatile panel is ideal when only a limited number of electrical circuits are needed or for larger systems where their modular design makes for an easy and attractive expansion of existing system capacity.Stock panels with breakers installed come standard with DC indicator lights but may be specially ordered with AC indicator lights. Blank versions of the panels have all the necessary hardware to install indicator lights and breakers. All panels are provided with a circuit identification label set of 22 common on-board electrical functions. ACCY-IBX is a blank version of ACCY-IX. No breakers or indicator lights are provided. Label set, indicator light, and breaker mounting hardware are provided.Specifications: Cut-Out Dimensions: 4 x 6 inches (10.2 x 15.2 centimeters) Weight: 1 lb.

    $153.00 $123.99

  • Sale -$28.01 Newmar PC-25 Power Conditioner Noise Filter [PC-25]

    Newmar Power Newmar PC-25 Power Conditioner Noise Filter [PC-25]

    PC-25 Power Conditioner Noise FilterThe interference or electronic “noise” generated by alternators, ignition systems, motors, etc. can render a vehicle or vessel’s radio or other electronic equipment virtually useless. This interference takes the form of popping or static on radios or audio gear and garbled images or “hashes” on video displays.These specialized filters can be used singly or in combination to attenuate conducted line noise, either at the affected equipment or at the noise source.Features: Heavy-duty aluminum construction Operate on 6-48 VDC systems Integral mounting flanges for secure installation Nickle-plated, brass stud connectors on alternator filters accommodate high-current cables and terminals Color-coded wire leads on PC models make in-line installation easy Specifications: Filtered Frequencies: Audio – 200 MHz Rating: 25 amp Installation Location: At affected equipment in “+” and “-” leads     Dimensions (inches): 2 x 4.25 x 3.25 Weight (lbs): 2

    $148.00 $119.99

  • Sale -$22.01 Newmar BB-5 Bus Bar [BB-5]

    Newmar Power Newmar BB-5 Bus Bar [BB-5]

    BB-5 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 5 Size (inches): 6-1/16” x 1-1/2”

    $117.00 $94.99

  • Sale -$19.01 Newmar BB-2/8 Bus Bar [BB-2/8]

    Newmar Power Newmar BB-2/8 Bus Bar [BB-2/8]

    BB-2/8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. centers in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 2 plus 8 – #8 screws Size (inches): 6-1/16” x 1-1/2”

    $104.00 $84.99

  • Sale -$19.01 Newmar PA40/30 Deck Horn [PA40/30]

    Newmar Power Newmar PA40/30 Deck Horn [PA40/30]

    PA40/30 Deck HornClear, distortion-free, waterproof deck horns are ideal for shipboard paging, hailing, fog horns, and alarm systems. high-impact plastic construction and assembled with stainless steel hardware. 8 Ohm.Specifications: Output Nominal/Peak: 40 watts or 30 watts Weight: 5 lbs. Specifications: Power - Output (Watts): 40w Box Dimensions: 7"H x 9"W x 12"L WT: 3.3 lbs Quick Guide (pdf)

    $103.00 $83.99

  • Sale -$19.01 Newmar BX-3 Junction Box [BX-3]

    Newmar Power Newmar BX-3 Junction Box [BX-3]

    BX-3 Junction BoxThis BX Series splashproof box provides secure, protected wiring connections in wheelhouses or below decks and engine rooms. Features: IP rating 54 – “Splashproof” Rugged cast aluminum box with white enamel finish Metal box reduces electrical interference Easy wiring access through multiple grommeted cable entries Supplied with high-quality connector strips – secure wires with compression fittings – no terminals required – see matrix below for connector strips specifications per box Specifications: Number of Connector Strips: 2 Positions per Strip: 11 Max Wire Gauge: 14 Max Amps (per position): 10  Cable Entries: 2 Cable Diameter: 0.59 in. Box Size: 4.7 x 3.7 x 1.3 in. Box Size: 11.9 x 9.4 x 3.3 cm Specifications: Type: Junction Box Box Dimensions: 2"H x 6"W x 9"L WT: 0.7 lbs

    $102.00 $82.99

  • Sale -$19.01 Newmar PC-10 Power Conditioner Noise Filter [PC-10]

    Newmar Power Newmar PC-10 Power Conditioner Noise Filter [PC-10]

    PC-10 Power Conditioner Noise FilterThe interference or electronic “noise” generated by alternators, ignition systems, motors, etc. can render a vehicle or vessel’s radio or other electronic equipment virtually useless. This interference takes the form of popping or static on radios or audio gear and garbled images or “hashes” on video displays.These specialized filters can be used singly or in combination to attenuate conducted line noise, either at the affected equipment or at the noise source.Features: Heavy-duty aluminum construction Operate on 6-48 VDC systems Integral mounting flanges for secure installation Nickle-plated, brass stud connectors on alternator filters accommodate high-current cables and terminals Color-coded wire leads on PC models make in-line installation easy Specifications: Filtered Frequencies: Audio – 200 MHz Rating: 10 amp Installation Location: At affected equipment in “+” and “-” leads     Dimensions (inches): 1.25 x 4.25 x 3 Weight (lbs): 1

    $100.00 $80.99

  • Sale -$14.01 Newmar CCX-R Thru-Dex Fitting [CCX-R]

    Newmar Power Newmar CCX-R Thru-Dex Fitting [CCX-R]

    CCX-R Thru-Dex FittingThis waterproof fitting's entry hole is pre-drilled in seal with a slit edge allowing feed through of cable with a factory-installed connector attached. One CCX fitting is required for each cable.Features: Create a 100% waterproof seal when routing cables through decks and bulkheads Entry hole predrilled in seal with a slit to edge Allowing installation or removal with the connector still attached Rugged weatherproof nylon housing with neoprene seal Specifications: Cable Diameter Range (inches): .47-.59 Max Connector Diameter (inches): 1.57 Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs

    $75.00 $60.99

  • Sale -$13.01 Newmar PA-30/20 Deck Horn [PA30/20] Newmar PA-30/20 Deck Horn [PA30/20]

    Newmar Power Newmar PA-30/20 Deck Horn [PA30/20]

    PA-30/20 Deck HornClear, distortion-free, waterproof deck horns are ideal for shipboard paging, hailing, fog horns, and alarm systems. high-impact plastic construction and assembled with stainless steel hardware. 8 Ohm.Specifications: Output Nominal/Peak: 30 watts or 20 watts Weight: 3 lbs. Specifications: Power - Output (Watts): 30w Box Dimensions: 7"H x 9"W x 10"L WT: 2.7 lbs Quick Guide (pdf)

    $71.00 $57.99

  • Sale -$13.01 Newmar PX-3 Junction Box [PX-3]

    Newmar Power Newmar PX-3 Junction Box [PX-3]

    PX-3 Junction BoxThis waterproof junction box is ideal for making wiring connections above or below decks, even in areas subject to occasional spray.Connector Strips Installed in BoxesMolded nylon encases pairs of connectors that use screw compression to secure wires without the use of lugs. Ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel “finger” compressed by a screw. The screw does not make contact with the wires, protecting the copper strands from cuts and breakage and meeting ABYC standards.Features: Similar to BX Series junction boxes but made from rugged, non-corrosive, high-impact polypropylene The snap-on cover provides a watertight seal “Universal” cut-to-fit graduated diameter cable entries accommodate a wide cable range Multiple position connector strips with “captive” screw compression wire terminals installed, see matrix below for connector strip specifications per box Multiple knockouts are provided for conduit access (in addition to cable entries) IEC Waterproof Rating: IP55 – “Water projected in jets against the enclosure from any direction shall have no harmful effects.” Specifications: Number of Connector Strips: 2 Positions per Strip: 9 Max Wire Gauge: 16 Number of Cable Entry Ports: 7 Number of Cable Entries Installed: 7 Spare Cable Entries Provided: 0 Cable Diameter Range (inches): .14 – .99 Cable Diameter Range (mm): 3.5 – 25.5 Box Size (inches): 4.45 x 4.45 x 2.29     Box Size (cm): 11.3 x 11.3 x 5.8 Specifications: Type: Junction Box Box Dimensions: 3"H x 7"W x 9"L WT: 0.5 lbs

    $71.00 $57.99

  • Sale -$13.01 Newmar DX-3 Feed-Thru Waterproof Fitting [DX-3] Newmar DX-3 Feed-Thru Waterproof Fitting [DX-3]

    Newmar Power Newmar DX-3 Feed-Thru Waterproof Fitting [DX-3]

    DX-3 Feed-Thru Waterproof FittingProvided with a solid neoprene cable gland, the installer drills holes and slits as required to accommodate cable with or without a factory-installed connector. Multiple cables may be passed through this single fitting.Features: Similar to CCX Series except the installer drills holes in the seal to accommodate cable(s) Multiple cables may be routed through a single-fitting Specifications: Drill-Thru Aperture: 1.65 in. Max. Connector Diameter: 1.65 in.

    $69.00 $55.99

  • Sale -$13.01 Newmar BX-2 Junction Box [BX-2]

    Newmar Power Newmar BX-2 Junction Box [BX-2]

    BX-2 Junction BoxThis BX Series splashproof box provides secure, protected wiring connections in wheelhouses or below decks and engine rooms. Features: IP rating 54 – “Splashproof” Rugged cast aluminum box with white enamel finish Metal box reduces electrical interference Easy wiring access through multiple grommeted cable entries Supplied with high-quality connector strips – secure wires with compression fittings – no terminals required – see matrix below for connector strips specifications per box Specifications: Number of Connector Strips: 1 Positions per Strip: 12 Max Wire Gauge: 16 Max Amps (per position): 6  Cable Entries: 8 Cable Diameter: 0.37 in. Box Size: 4.4 x 2.4 x 1.2 in. Box Size: 11.2 x 6.1 x 3.1 cm Specifications: Type: Junction Box Box Dimensions: 2"H x 4"W x 8"L WT: 0.45 lbs

    $69.00 $55.99

  • Sale -$11.01 Newmar BB-2 Bus Bar [BB-2]

    Newmar Power Newmar BB-2 Bus Bar [BB-2]

    BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring terminals Insulated base (reinforced nylon resin with a clear protective cover) Specifications: Quantity of 5/16" Studs: 2 Size (inches): 1/16" x 1 1/2"

    $63.00 $51.99

  • Sale -$12.01 Newmar CCX-T Thru-Dex Fitting [CCX-T]

    Newmar Power Newmar CCX-T Thru-Dex Fitting [CCX-T]

    CCX-T Thru-Dex FittingThis waterproof fitting's entry hole is pre-drilled in seal with a slit edge allowing feed through of cable with a factory-installed connector attached. One CCX fitting is required for each cable.Features: Create a 100% waterproof seal when routing cables through decks and bulkheads Entry hole predrilled in seal with a slit to edge Allowing installation or removal with the connector still attached Rugged weatherproof nylon housing with neoprene seal Specifications: Cable Diameter Range (inches): .18-.35 Max Connector Diameter (inches): .83 Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs

    $64.00 $51.99

  • Sale -$11.01 Newmar CCX-S Thru-Dex Fitting [CCX-S]

    Newmar Power Newmar CCX-S Thru-Dex Fitting [CCX-S]

    CCX-S Thru-Dex FittingThis waterproof fitting's entry hole is pre-drilled in seal with a slit edge allowing feed through of cable with a factory-installed connector attached. One CCX fitting is required for each cable.Features: Create a 100% waterproof seal when routing cables through decks and bulkheads Entry hole predrilled in seal with a slit to edge Allowing installation or removal with the connector still attached Rugged weatherproof nylon housing with neoprene seal Specifications: Cable Diameter Range (inches): .35-.55 Max Connector Diameter (inches): .83 Specifications:Type: Deck Seal

    $63.00 $51.99

  • Sale -$11.01 Newmar BX-1 Junction Box [BX-1]

    Newmar Power Newmar BX-1 Junction Box [BX-1]

    BX-1 Junction BoxThis BX Series splashproof box provides secure, protected wiring connections in wheelhouses or below decks and engine rooms. Features: IP rating 54 – “Splashproof” Rugged cast aluminum box with white enamel finish Metal box reduces electrical interference Easy wiring access through multiple grommeted cable entries Supplied with high-quality connector strips – secure wires with compression fittings – no terminals required – see matrix below for connector strips specifications per box Specifications: Number of Connector Strips: 1 Positions per Strip: 6 Max Wire Gauge: 16 Max Amps (per position): 6  Cable Entries: 2  Cable Diameter: 0.25 in. Box Size: 2 x 2 x 1.2 in. Box Size: 5.1 x 5.1 x 3.1 cm Specifications: Type: Junction Box Box Dimensions: 2"H x 4"W x 6"L WT: 0.35 lbs

    $61.00 $49.99

  • Sale -$10.01 Newmar PX-2 Junction Box [PX-2]

    Newmar Power Newmar PX-2 Junction Box [PX-2]

    PX-2 Junction BoxThis waterproof junction box is ideal for making wiring connections above or below decks, even in areas subject to occasional spray.Connector Strips Installed in BoxesMolded nylon encases pairs of connectors that use screw compression to secure wires without the use of lugs. Ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel “finger” compressed by a screw. The screw does not make contact with the wires, protecting the copper strands from cuts and breakage and meeting ABYC standards.Features: Similar to BX Series junction boxes but made from rugged, non-corrosive, high-impact polypropylene The snap-on cover provides a watertight seal “Universal” cut-to-fit graduated diameter cable entries accommodate a wide cable range Multiple position connector strips with “captive” screw compression wire terminals installed, see matrix below for connector strip specifications per box Multiple knockouts are provided for conduit access (in addition to cable entries) IEC Waterproof Rating: IP55 – “Water projected in jets against the enclosure from any direction shall have no harmful effects.” Specifications: Number of Connector Strips: 2 Positions per Strip: 6 Max Wire Gauge: 16 Number of Cable Entry Ports: 7 Number of Cable Entries Installed: 7 Spare Cable Entries Provided: 0 Cable Diameter Range (inches): .14 – .81 Cable Diameter Range (mm): 3.5 – 20.5     Box Size (inches): 3.35 x 3.35 x 1.66     Box Size (cm): 8.5 x 8.5 x 4.2 Specifications: Type: Junction Box Box Dimensions: 2"H x 6"W x 8"L WT: 0.15 lbs

    $56.00 $45.99

  • Sale -$8.01 Newmar PX-1 Junction Box [PX-1]

    Newmar Power Newmar PX-1 Junction Box [PX-1]

    PX-1 Junction BoxThis waterproof junction box is ideal for making wiring connections above or below decks, even in areas subject to occasional spray.Connector Strips Installed in BoxesMolded nylon encases pairs of connectors that use screw compression to secure wires without the use of lugs. Ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel “finger” compressed by a screw. The screw does not make contact with the wires, protecting the copper strands from cuts and breakage and meeting ABYC standards.Features: Similar to BX Series junction boxes but made from rugged, non-corrosive, high-impact polypropylene The snap-on cover provides a watertight seal “Universal” cut-to-fit graduated diameter cable entries accommodate a wide cable range Multiple position connector strips with “captive” screw compression wire terminals installed, see matrix below for connector strip specifications per box Multiple knockouts are provided for conduit access (in addition to cable entries) IEC Waterproof Rating: IP55 – “Water projected in jets against the enclosure from any direction shall have no harmful effects.” Specifications: Number of Connector Strips: 1 Positions per Strip: 6 Max Wire Gauge: 16 Number of Cable Entry Ports: 5 Number of Cable Entries Installed: 3 Spare Cable Entries Provided: 2 Cable Diameter Range (inches): .14 – .81 Cable Diameter Range (mm): 3.5 – 20.5     Box Size (inches): 2.95 x 2.95 x 1.66     Box Size (cm): 7.5 x 7.5 x 4.2 Specifications: Type: Junction Box Box Dimensions: 3"H x 6"W x 8"L WT: 0.2 lbs

    $46.00 $37.99

You have seen 76 out of 76 products

Newmar
Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account