Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

Read more less

RayNet to RJ45 Male Cable - 10MPart #: A80159RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 10M (32.81') RayNet to SeaTalkhs (RJ45) cable

Read more less

RealVision 3D Transducer Extension Cable - 5M(16')RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. Specifications: Type: Extension Box Dimensions: 2"H x 10"W x 10"L WT: 1.5 lbs UPC: 723193817087

Read more less

Raymarine RCR-1 Remote microSD Card ReaderModel: A80585Raymarine's RCR-1 remote SD card reader allows for an additional SD card to be used for charts, software updates, or for data storage. With the flexibility to be mounted anywhere on your console.

Read more less

Raymarine Active Speaker for Ray63/Ray73/Ray90/Ray91 For RAY 63/73/90/91Model: A80543Active remote speaker for use with Ray63/73/90/91 in noisey environments.5W 1-Way 4-Ohm Black Active VHF Speaker for Ray63/73/90/91 Radio by Raymarine(R). Hear every word loud and clear with an active, amplified speaker kit for your Ray 90 or 91 VHF radio. This speaker kit is ideal for high-noise areas like open powerboats, express cruisers, windy flybridges, or even below-decks on loud vessels. The active speaker contains its own on-board audio amplifier and audiophile-grade speaker. Even at its highest volume setting it delivers crystal-clear audio that you'll be able to hear and understand. The speaker is enclosed in a compact housing that is both rugged and waterproof. Mount it vertically or horizontally in any bulkhead or overhead. The speaker connects directly into the nearest wired or wireless handset base.

Read more less

Quantum™ Data Cable - White - 10M10M Cable specifically for Raymarine's Quantum™ Radome with Wi-Fi and Ethernet. Specifications: Type: Cables Box Dimensions: 2"H x 10"W x 11"L WT: 1 lbs UPC: 723193783955

Read more less

VHF NMEA0183 To SeaTalkng Converter KitRaymarine's VHF NMEA0183 to Seatalkng Converter Kit is used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network. Specifications: Data Interface: NMEA 0183 Box Dimensions: 1"H x 6"W x 9"L WT: 0.5 lbs UPC: 723193783153

Read more less

Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The SeaTalk to SeaTalkng Starter Kit is the perfect way to get started with your SeaTalkng compatible Raymarine product. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable. What's in the kit?A06064: SeaTalkng 5-way ConnectorA06031: SeaTalkng Backbone Terminator (x2)A06040: SeaTalkng Spur Cable 3MA06049: SeaTalkng Power Cable

Read more less

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network. The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including: SeaTalk 1 to SeaTalkng converter SeaTalkng Terminators (x2) SeaTalkng Blanking Plugs (x2) 400mm (15") SeaTalk 1 to SeaTalkng converter cable SeaTalkng power cable 1m (3.3') SeaTalkng spur cable Features: Easy plug-and-play connectivity with SeaTalkng networks. Works with select SeaTalk 1 instruments, GPS sensors and LifeTag. Included SeaTalkng components establish basic backbone connectivity. Easily expanded using Raymairne SeaTalkng network components. Owner's Manual (pdf)

Read more less

5M RayNet to RayNet Cable for e & c Series

Read more less

RealVision 3D Transducer Extension Cable - 3M (10')RealVision 3D Transducer Extension Cables work with both the transom-mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. Specifications: Type: Extension Box Dimensions: 2"H x 10"W x 10"L WT: 1 lbs UPC: 723193817070

Read more less

Caterpillar Loom Cable - 12 WayCaterpillar Loom Cable, 12 Way is used to connect ECI-100 to Caterpillar engines in order to display engine data on Raymarine MFDs.

Read more less

Fist Mic Assembly for Ray60, 70, 63 & 73Raymarine's replacement detachable fist-mic with built-in controls and mic relocation capability.The fist-mic has built-in controls for channel up/down, hi/low power selection, and instant access to channel 16 or another preferred channel. The fist-mic also features noise-canceling technology so you'll always be heard loud and clear regardless of engine or background noise. Raymarine's fist-mic is also detachable and can be connected from the front or rear for installation flexibility. Specifications: Type: Microphones Box Dimensions: 3"H x 4"W x 7"L WT: 0.75 lbs UPC: 723193794487

Read more less

CPT-S Transom Mount - Conical - High ChirpConnects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downvision element.Also connects to Axiom Pro S series Units with optional adapter cable A80490Features: High Chirp Sonar Transom Mount has a trolling motor bracket accessory Max Depth: 900' MFD must have version 16 software or later Specifications: Mounting Style: Transom Chirp: High Temperature: Yes Speed Included: No Imaging: Standard Box Dimensions: 3"H x 8"W x 12"L WT: 1.4 lbs UPC: 723193813102

Read more less

ST300 Thru-hull Shorty™The S300/ST300 speed sensors are our lowest cost and shortest thru-hull speed sensors. As part of our Shorty™ Series, they are designed for boats with low headroom. The plastic P371 low profile outer housing option is nearly flush and minimizes drag with only 5 mm (3/16") extending outside of the hull. The plastic P398 countersunk outer housing option mounts flush, eliminating turbulence for more accurate speed readings. Specifications: Cable Length (Feet): 30' Mounting Style: Thru-Hull Chirp: No Temperature: Yes Speed Included: Yes Box Dimensions: 4"H x 6"W x 6"L WT: 1.25 lbs UPC: 723193260081

Read more less

This is a SeatalkNG starter kit consisting of T70134 STNG STARTER KIT Consisting of: A06064 STNG 5-WAY CONNECTOR A06031 STNG BACKBONE TERMINATOR (x2) A06040 STNG SPUR CABLE, 3M A06049 STNG POWER CABLE, 2M

Read more less

Compatible with the following instruments: ST70* ST60+ ST290Compatible hull material: Aluminum and fiberglassCable: 45 ft. cableHole diameter for installation: 2"*Using with ST70 requires purchase of ST70 Depth Pod, sold seperately. Specifications: Temperature: No Speed Included: No Mounting Style: Thru-Hull Chirp: No Cable Length (Feet): 45' Box Dimensions: 4"H x 6"W x 8"L WT: 2.1 lbs UPC: 723193260302

Read more less

Y-Cable (9 pin to 9 & 7 pin) to attach a DownVision (CPT-1xx)Transducer & an Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom 7DV

Read more less

Raymarine CPT-S High CHIRP Comical Transom Mount Transducer Model: E70342 UPC: 723193813102 NEW CPT-S urethane transom mount CHIRP sonar transducer Max Depth 900 feet Specifications Installation Transom Mount Max Depth (Ft) 900 Frequency (KHz) CHIRP Beam Width (L/H) 25 deg Records Depth Supported Deadrise / Transom Angles 0-90 deg Transom What's in the Box: CPT-S transom Mount Transom Mount Hardware Trolling motor bracket

Read more less

ST300/P371 Plastic Low Profile Through Hull Speed Transducer. For use with ST40 Instruments. Speed and Temp only. 200 kHz.

Read more less

5M Power Cable for Alpha DisplaysConnect the Alpha Performance Display with a single cable for both power and data, meaning fewer cables to run through the mast and the deck.Features: 5-meter Power & RayNet cable Suitable for both 7” and 9” Alpha Displays Specifications: Type: Power Cords Box Dimensions: 2"H x 10"W x 10"L WT: 1.5 lbs UPC: 723193859322

Read more less

2M RayNet to RayNet Cable for e & c Series

Read more less

TA122 Wind Transmitter Bearing Service Kit

Read more less

Power Cable - 15M with Bare WiresFeatures: Power Cable 15M Comes with bare wires Specifications: Type: Power Cords Box Dimensions: 2"H x 10"W x 10"L WT: 3.1 lbs UPC: 723193813454

Read more less

Adds 5 meters of length to the stock transducer cable.

Read more less

Trunnion Mounting Kit for Axiom & Axiom+ 9This Raymarine mounting bracket is designed to be used with Axiom and Axiom+ 9.Features:The included knobs secure the Axiom display to the bracket Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 10"L WT: 1.25 lbs UPC: 723193818381

Read more less

E120 Classic To Axiom Pro 12 Adapter PlatePowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120 Classic Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1.05 lbs UPC: 723193824962

Read more less

C120/E120 Classic to Axiom 12 Adapter Plate to Existing Fixing Holes Axiom 12 adapter plate for legacy C120 / E120 Classic MFDs Fixing holes: Existing Model: Axiom 12 (All variants) Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1 lbs UPC: 723193821619

Read more less

C12x/e12x to Axiom Adapter Plate to Existing Fixing HolesPowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12″ multifunction displays in place of a C12x/e12x Series Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 16"L WT: 0.4 lbs

Read more less

A12X to Axiom 12 Adapter Plate to Existing Fixing HolesPowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12" multifunction displays in place of a A12x Series Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 0.6 lbs UPC: 723193821398

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Data Interface: NMEA 2000 Cable Length (Meters): 20m Box Dimensions: 2"H x 8"W x 9"L WT: 2 lbs UPC: 723193060377

Read more less

DSM30 & DSM300 Transducer Adapter CableThe DSM30/DSM300 Transducer Adapter Cable allows you to utilize Raymarine's wide offering of specialty and high performance in-hull, through-hull or transom mount transducers with our new MFDs with built-in sounder. This adapter is also perfect for occaisions where a new sounder-equipped Raymarine MFD is replacing both an old display and DSM.Adapter cable adapts DSM30/DSM300 transducers to A series Transducers Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 5"L WT: 0.2 lbs UPC: 723193660669

Read more less

P7 Plastic Low Profile through hull depth transducer. For use with ST40 Instruments. Depth only. 200 kHz. 30 feet cable

Read more less

Quantum™ Data Cable - White - 5M5M Cable specifically for Raymarine's Quantum™ Radome with Wi-Fi and Ethernet. Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 12"L WT: 0.6 lbs UPC: 723193783948

Read more less

This Raymarine 45 mm right angle adapter cable is ideal for shallow helm installations where cable space is limited. The adapter connects to any 25-pin RealVision transducer and plugs into any Axiom RV or Axiom Pro RVX with a right angle connector.

Read more less

3.5 INCH PEDESTAL ASSY Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

Read more less