Raynet to RJ45 Female Adapter 100mmThis adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45 Digital Radar Cable to a RayNet Radar Cable so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an ace or gS Series multifunction display.

Read more less

Handset Extension Cable f/Ray60/70 - 10MRaymarine's 10M cable is used to extend the handset that is included with Raymarine's Ray60 and Ray70 VHF Radios. Specifications: Type: Cables Box Dimensions: 2"H x 9"W x 10"L WT: 1.55 lbs UPC: 723193788547

Read more less

RayNet(M) to RayNet(M) Cable - 100mmThe RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. Data: EthernetLength: 100mm

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Cable Length (Meters): 9m Box Dimensions: 1"H x 7"W x 9"L WT: 0.95 lbs UPC: 091975004841

Read more less

RayNet to Seatalkhs Socket Adapter CableThe Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide and E-Classic MFDs to new generation RayNet multifunction displays.The adapter cable is 15" (400mm) long.

Read more less

RayNet to RJ45 Male Cable - 1mRayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 1m (3.28ft.) RayNet to SeaTalkhs (RJ45) cable The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch.When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.

Read more less

Adaptor Cable (25 pin to 9 pin) used to attach DownVision or CPT-S transducers to AXIOM RV,Axiom PRO RV or Axiom PRO S

Read more less

Raymarine Handset AdapterCable 12 pin to 10 pinModel: A80296Ray 60 & 70 Fistmic adapter cable (8pin F to 12pin M)

Read more less

Raymarine 10m Extension Cable for HandsetModel: A80292Use this 10m cable to extend the handset that is included with the Ray60, Ray70, Ray90 and Ray91 radios.

Read more less

This has a RayNet Female connector at one end and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a "RJ45" Digital Radar Cable to a "RayNet" Radar Cable, so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an a,c,e or gS Series multifunction display.

Read more less

The new RayNet (Male) to RayNet (Male) Cable Joiner adapter lets you connect 2 standard RayNet networking cables together in instances where you need to extend the length of a cable run. The cable is 3.9-inches (100mm) long.

Read more less

The new 400mm RayNet to RayNet network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm) long. This cable joins Raymarine's existing line of RayNet interconnect cables available in 1, 5, 10 or 20 meter lengths.

Read more less

The new RayNet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide, C-Wide and E-Classic MFDs to new generation RayNet multifunction displays. The adapter cable is 15-inches (400mm) long.

Read more less

The Raynet to RJ45 Ethernet (M) adapter can be used to connect new c and e-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a radar scanner, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.

Read more less

Adaptor Plate for Axiom 9 to C80/E80 Size Cutout *Will Require New HolesThe Axiom 9 adapter plate is used when replacing an existing legacy C80 or E80 Classic Multifunction Display with an Axion 9 or Axion 9 RV requires new fixing holes. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1.05 lbs UPC: 723193824955

Read more less

TA125 Wind Transmitter Battery Pack and Seal Kit

Read more less

TA119 3-up Battery Pack and Seal Kit Specifications: Type: Batteries Box Dimensions: 2"H x 4"W x 5"L WT: 0.15 lbs UPC: 723193703083

Read more less

TA100 Wind Vane, bearing & stud kit

Read more less

The standard cable length on Raymarine's transducers for A series and C/E series with built in sonar is 33-feet (10-meters). This extension cable will add an additional 9.8 feet (3 meters) to the transducer cable. Note: For optimal performance, Raymarine does not recommend using more than two extension cables on any transducer cable run.

Read more less

Trim Kit for Axiom Pro 12/eS12Raymarine Multifunction Display eS Series and Axiom Pro accessories trim kit. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 10"L WT: 0.35 lbs UPC: 723193794449

Read more less

RV-100 RealVision 3D Transom Bracket KitThis transom mount transducer service kit includes all of the spare parts and accessories originally included with the RV-100 transducer. The bracket kit includes the stainless steel transom bracket and mounting screws, kick-up pivot hardware, transducer carrier bracket and the carrier mounting bolt. *The RV-100 transducer and cable is not included. Specifications: Type: Misc Box Dimensions: 2"H x 9"W x 12"L WT: 1.1 lbs UPC: 723193817285

Read more less

Adapter Cable - 25-Pin to 7-Pin - CP370 Transducer to Axiom RVThe Raymarine transducer adapter cable allows you to keep your existing 600w Airmar transducer used with a CP370 sonar module and adapts it to your Axiom RV. The 7-pin side connects direct to your Airmar 600w transducer and the 25-pin to the transducer port on the Axiom RV.Features: Allows your existing Airmar 600w transducer to be used on Axiom 7 RV 7-pin to 25-pin adapter Compatible with 600w , DSM300, CP300 and CP370 sonar transducers Specifications: Type: Adapters Box Dimensions: 1"H x 8"W x 12"L WT: 0.4 lbs UPC: 723193817216

Read more less

Power Cable - 10M with Bare Wires for QuantumQuantum 10M power cable with Bare wires. Specifications: Type: Power Cords Box Dimensions: 2"H x 10"W x 12"L WT: 2.2 lbs UPC: 723193793404

Read more less

Adapter Cable for Axiom Pro with CP370 TransducerUsed to connect a conventional 600W transducer to an Axiom Pro multifunction display. 11-pin to 8-pin adapter cable to attach to an existing 8-pin Airmar CP370 style transducer to Axiom Pro. Specifications: Type: Adapters Box Dimensions: 1"H x 9"W x 12"L WT: 0.35 lbs UPC: 723193817278

Read more less