Drain Plug & Housing - Coarse Thread - Black NylonFeatures: 24mm(15/16") Hole Diameter Water tight seal Retaining legs UV Stabilized Nylon plug and housing Specifications: Color: Black/Red Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800041589

Read more less

Shroud CleatFeatures: All stainless steel construction, compatible with you stainless steel rigging Will not corrode Easily attached to 5/32" thru 3/8" diameter wire or rod Ideal for flag, radar reflector and steaming shape halyards with an eye for attaching a snap shackle Low profile, projects only 1/2" from shroud

Read more less

C-Cleat Cam Cleat - Small - Black w/Black Base2-8mm(3/32" - 5/16") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications:Range of cleats for all requirements including control lines, jib sheet and mainsheet cleatingMaterials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring Specifications: Color: Black Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 9316800450732

Read more less

Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

Read more less

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

Read more less

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'. Eliminates possibility of halyard wrap with furling systems when properly installed. For halyards up to 5/8" (16mm). Uses (4) #10 RH Fasteners. L = 2" (51mm), Width = 2-3/4" (70mm), SWL = 2000 lbs (907 kg), Weight 4 oz (114 grams)  

Read more less

2-3/8" Aluminum SheaveFeatures: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm)

Read more less

T-Track Endstop for 1-1/4" Track - Black1 1/4" Black Endstop   Specifications: Color: Black Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 740507007262

Read more less

T-Track Endstop for 1" Track - Grey1" Grey Endstop Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 4"L WT: 0.5 lbs UPC: 740507007255

Read more less

T-Track Endstop for 1-1/4" Track - Grey1 1/4" Grey Endstop   Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 740507007279

Read more less

Exit Plate/Flat for up to 3/4" LineSpecifications: Halyard Size 3/4" (19 mm) Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g)

Read more less

Investment Cast Pad Eye - 3" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately. Specifications:  Eye Width 1-1/8" (29 mm) Eye Height 7/8" (22 mm) Eye Stock 1/2" (13 mm) Length 3" (76 mm) Width 3" (76 mm) Fasteners (4), 3/8" FH (10 mm) C/C A 1-1/8" (29 mm) C/C B 1-11/16" (43 mm) SWL 8500 lbs. (3800 kg) Specifications: Color: Stainless Box Dimensions: 2"H x 4"W x 5"L WT: 0.75 lbs UPC: 740507007866

Read more less

T-Track Endstop for 1" Track - Black1" Black Endstop Specifications: Color: Black Box Dimensions: 1"H x 2"W x 4"L WT: 0.5 lbs UPC: 740507007248

Read more less

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g

Read more less

Flat/Large Sail Track StopsFlat/Large: 0.75 x 1 x 0.125" (19 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine garde nickel plated brass. Flat stops come with lanyard holes. Quick Guide (pdf)

Read more less

Asymmetric Carbine Hook - Length 120mm - 15/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 4-23/32" Working load (lb) 3170 WLL (lb) 1980 Breaking load (lb) 9920 Weight (lb) 0.516 Dimensions (see 2nd image): A (inch) 15/16" B (inch) 5/8" D diameter (inch) 15/32"

Read more less

Asymmetric Carbine Hook - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 3-5/32" Working load (lb) 2110 WLL (lb) 660 Breaking load (lb) 3300 Weight (lb) 0.161 Dimensions (see 2nd image): A (inch) 19/32" B (inch) 7/16" D diameter (inch) 5/16"

Read more less

Asymmetric Carbine Hook - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working load (lb) 880 WLL (lb) 350 Breaking load (lb) 1760 Weight (lb) 0.068 Dimensions (see 2nd image): A (inch) 7/16" B (inch) 9/32" D diameter (inch) 15/64"

Read more less

Fairlead - Stainless Steel Lined - 14mm(9/16") ID - BlackFairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.Features: Impact resistant, U.V. stablised Nylon Stainless steel liner Specifications: Color: Black Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 9316800023714

Read more less

Flat/Small Sail Track StopsFlat/Small: 0.42 x 1 x 0.125" (11 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine garde nickel plated brass. Flat stops come with lanyard holes. Quick Guide (pdf)

Read more less

Tiller-TamerMaintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit space. No need to lash the tiller when boat is moored or trailered. Specifications: Color: Black Box Dimensions: 2"H x 5"W x 9"L WT: 0.3 lbs UPC: 011698220502 Quick Guide (pdf)

Read more less

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

Read more less

Standard Cam-Matic® Aluminum CleatAluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications: Height: 30 mm / 1-3/16 in Length: 65 mm / 2-9/16 in Width: 32 mm / 1-1/4 in Weight: 71 g / 2.5 oz Minimum line: 3 mm / 1/8 in Maximum line:12 mm / 1/2 in Fastener spacing: 38 mm / 1-1/2 in Fasteners: 5 FH mm / 10 FH in Maximum working load: 136 kg / 300 lb Breaking load: 340 kg / 750 lb Pawls: Aluminum

Read more less

Micro Carbo-Cam Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat.Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.Specifications: Weight: 26g / 0.9oz Maximum working load: 68kg / 150lb

Read more less

3" HR Safety Snap Hook - 75mmFeatures: HR 17.4 PH stainless steel grade forged snap hook Various applications onboard Outstanding working and breaking loads Modern design Applications:Various uses onboard: fastening applications

Read more less

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars minimizing friction and chafingMaterials: Nylatron&regl sheave Grade 316 Stainless Steel cheeks Specifications:Sheave Ø: 40.0mm(1-9/16")Max. Rope Ø:10.0mm(3/8")Max. Cable Ø: 5.0mm(3/16")B.L.: 1,000kg(2,200lbs) Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 9316800335121

Read more less

Asymmetric Carbine Hook - Length 100mm - 13/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 3-15/16" Working load (lb) 2910 WLL (lb) 1100 Breaking load (lb) 5510 Weight (lb) 0.3 Dimensions (see 2nd image): A (inch) 45/64" B (inch) 33/64" D diameter (inch) 25/64"

Read more less

Symmetric Carbin Hook Without Eye - Length 120mm - 15/32"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications: Materials 316L stainless steel grade Length (inch) 4-23/32" Working load (lb) 2990 WLL (lb) 1670 Breaking load (lb) 8370 Weight (lb) 0.441 Dimensions (see 2nd image): A (inch) 53/64" B (inch) 5/8" D diameter (inch) 15/32"

Read more less

Asymmetric Carbine Hook - Length 170mm - 15/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tether Specifications: Materials 316L stainless steel grade Length (inch) 6-11/16" Working load (lb) 3170 WLL (lb) 1980 Breaking load (lb) 9920 Weight (lb) 0.741 Dimensions (see 2nd image): A (inch) 1-3/16" B (inch) 25/32" D diameter (inch) 15/32"

Read more less

Swivel Dead Eye & Cleat Fairlead - 3-12mm(1/8 - 1/2") RopeSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under load.Features: 360° Rotation Medium T-Cleat & FairleadApplications:Sheet leads and halyards on dinghies and catamaransMaterial: Alloy cleating arms Grade 316 stainless steel fittings Specifications:Rope Ø: 3-12mm(1/8" - 1/2")Weight: 171g(6.0oz) Specifications: Color: Black Box Dimensions: 3"H x 3"W x 5"L WT: 0.4 lbs UPC: 9316800027880

Read more less

Drain Plug Only - Plastic NylonFeatures: Plug to suit RF294 & RF737 Water tight seal Retaining legs UV Stabilized Nylon plug Specifications: Color: Black/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.05 lbs UPC: 9316800031252

Read more less

Micro Standard Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 33mm/1-5/16in Weight: 85g/3oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 27mm / 1-1/16in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/ 200lb

Read more less

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment.   The unique, super-low friction ball race system runs on a large diameter center boss, which ensures an extremely low friction performance.  Technical Specifications: Overall Diameter - 1- 4/10" (35mm) Hub Width -  .47" (12mm) Bore - .31" (8mm) *Sold as an Individual 

Read more less

Sister Clip - Stainless Steel - LargeEffective means of quickly attaching and detaching ropes58.0mm(2-1/4") Length Specifications: Color: Stainless Box Dimensions: 1"H x 1"W x 2"L WT: 0.3 lbs UPC: 9316800053315

Read more less

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm.Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core

Read more less

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easy removal of the cleat.  Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required and removed when not in use - reducing deck clutter and rope snags.Compatible With:.98" (25 mm) wide "T' Track slider systems Technical Specifications: Material (Cleat) - Nylon Material (Base) - Aluminum  Dimensions (Cleat length) - 6.49" (165 mm) Weight - 4.73 oz (134 g) *Sold as an Individual  Specifications: Color: Black Box Dimensions: 3"H x 3"W x 8"L WT: 0.5 lbs UPC: 5035088512539

Read more less

Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of lines, while maintaining minimum wear to both cam and line.Specifications: Max Line Ø: 10mm - 14mm(0.4" - 0.55") FasteningsØ: 5mm (0.20") Fastenings Center: 50mm (1.97") Holding Power: 260kg (573.20lbs) Weight: 50kg (110.23lbs) Specifications: Color: Black Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs UPC: 5035088703005

Read more less

Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features: Effective and reliable means of automatic bailing Made of stainless steel and guaranteeing years of trouble free servicing Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 7"L WT: 0.85 lbs UPC: 9316800000005

Read more less

Rigging Tape - Black - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or people. When used as directed, the tape actually bonds to itself and makes one solid piece. It can also be used on hot objects for an emergency repair or radiator hoses, etc. Rigging tape is sold in black or white and packaged in a reusable, retail clamshell pack with color header and instructions.  Specifications: Color: Black Box Dimensions: 2"H x 5"W x 8"L WT: 0.25 lbs UPC: 762799501167

Read more less

Diamond Pad EyeThis pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds.Specifications: 1/4 in. Bail Length: 2-5/8 in. Width: 1-1/2 in.

Read more less

Traveller Eye (Pair) Size 0, 16mmFeatures: Size 0 16mm Traveller Eye Pair Recirculating ball bearing dinghy traveller range Complementing Barton’s successful larger traveller range, the dinghy traveller system uses proven recirculating Delrin ball technology and features a 16mm wide track.

Read more less

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are manufactured from marine grade 'Spectro' anodized aluminum, for high wear resistance and long life. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.The true clutch mechanism allows the line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanisms opening and closing action is precise and easy to operate, even with cold, wet hands.  A unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace it with printed colored inserts to denote at a glance the function of the unit (i.e. main, genoa, spinnaker, etc).The D0 550 clutch features the advantage of a bolt-together construction which allows for ease of servicing and replacement of parts.Features: Modern high-performance materials  True clutch mechanism  Protects lines Maintenance friendly Ergonomically designed Technical Specifications: Dimension (L x W x H)  - 5 ¼” x 2 ½” x 2 ½” (13.3 x  6.3 x 6.3 cm) Hole centres = 3 1/8” (79mm) Maximum Rope Capacity - .47” (1.2 cm) Maximum Holding Power – 1,212 Lb (550 kg) Weight - 1.2 lb (544 g) *Sold as an Individual  Specifications: Color: Black Box Dimensions: 3"H x 3"W x 6"L WT: 1.2 lbs UPC: 5035088815012 Quick Guide (pdf)Brochure (pdf)

Read more less

Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features: Clamps onto shroud wire without causing damage Simple and convenient to install Durable marine grade nylon construction Specifications: Color - Black Material - Nylon Length - 100mm (4") Weight - 26 grams In the Box: Shroud cleat Mounting hardware Specifications: Color: Black Box Dimensions: 1"H x 3"W x 4"L WT: 1 lbs UPC: 5035088521104

Read more less

Single DO 550 Rope Clutch Cruising Racing Max 12mm LineFor cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 moulded parts are made from high-grade plastics which are strong, light, and impact resistant. Cams and bases are from marine-grade aluminium, anodised for long life in the harsh marine environment.

Read more less

Triple DO 550 Rope ClutchModern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are from marine grade aluminum, anodized for long life in the harsh marine environment.True clutch mechanismThis true clutch mechanism allows lines to be adjusted through the unit in the closed, locked position with minimal slippage. Release under load is positive and requires little effort. The mechanism’s opening and closing action is precise and easy to operate, even with cold, wet hands. A positive handle lock in the closed position is also featured.Kind to linesThe clutch’s cam and base, manufactured from high grade extruded aluminium, feature a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines.Stainless steel rope fairleads are fitted to both line entry and exit points; a feature which helps to prevent wear to both clutch and lines.Bolt-together construction for straightforward servicingThe DO 550 clutch range features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. A full range of components is available from our Barton stockist.Important fitting notes: rope clutchesWhen fitting ensure a fair lead straight through the clutch to prevent wear to side plates and/or reducedload capabilities.For best performance site clutch approximately 1ft (300mm) forward of the winch to ensure a fair leadboth vertically and horizontally.Use Barton deck organisers forward of the clutch to gain perfect alignment.Always use a bolt-through fastening with a suitable sealant.A drilling template is provided on our packaging for your convenience.Ergonomically designed handleThe handle is strong and easy to grip, with a positive smooth lock and unlock action.A unique feature of this new design is the removable insert on the top face of the handle.These inserts are available packaged separately with a selection for both cruising and racing yachts.

Read more less

Furling Top SwivelThe top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.Features: Drum Diameter: 25mm Sail Area: 100 square foot Break Load: 1,108kg Safe Working Load: 554kg Weight: 55g

Read more less

Fast Entry Cam Cleat - SmallFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 200 lbs (91kg) Line 1/8" - 5/16" (3mm - 8mm), Requires (2) #8 Flat Head Fasteners. 1 1/16" (27mm) Centers.

Read more less

Aluminum Deck Cleat - 4"Length 4" (102 mm), Line Score 3/8" (10 mm), Fasteners (2), #10 FH (5 mm), C/C A 1" (25 mm), Weight 1.5 oz. (43 g)

Read more less