Diamond Pad Eye - Round - 79mm Length (3-7/64") - M6 ScrewFeatures: Mechanical resistance versus corrosion resistance ratio Optimized dimensions For M6 screw Applications: Mast foot blocks  Reefing blocks Various fastenings Specifications: Materials: Duplex stainless steel grade Working Load: (lb) 6393.4 / (kg) 2900 Breaking Load: (lb) 17196 / (kg) 7800 Weight: (lb) 0.315 / (g) 143 W.L 1 (90 degrees): (lb) 6393.4 / (kg) 2900  W.L 2 (45 degrees): (lb) 5732 / (kg) 2600  W.L 3 (0 degrees): (lb) 5291 / (kg) 2400  B.L 1 (90 degrees): (lb) 17196 / (kg) 7800  B.L 2 (45 degrees): (lb) 15211.9 / (kg) 6900  B.L 3 (0 degrees): (lb) 13889 / (kg) 6300  Dimensions: A: (inch) 3 7/64" / (mm) 79 B: (inch) 2 23/64" / (mm) 60 C: (inch) 1 31/32" / (mm) 50 D: (inch) 1 17/64" / (mm) 32 E: (inch) 47/64" / (mm) 18.5 F: (inch) 55/64" / (mm) 22 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Self-Locking Allen Head Pin Bow Shackle - 10mm Diameter - 13/32"Features:  Self-locking twisted shackle with allen head pin forged in grade 316L stainless steel The pin is locked into one of the indentations The head of the pin does not stick out from the shackle body and thus eliminates any risk of snagging No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications (lifting i.e…) CE marking Applications: Ideal to link chain and anchor On the halyard, avoids to damage the sails To be used when the clutter is reduced To be used when ample room is required Specifications: Materials: 316 stainless steel grade Working load: (lb) 3170 / (kg) 1440  WLL: (lb) 1890 / (kg) 860  Breaking load: (lb) 9470 / (kg) 4300  Weight: (lb) 0.293 / (g) 133  Dimensions: A: (inch) 1 27/32" / (mm) 47  B: (inch) 25/32" / (mm) 20  C: (inch) 25/64" / (mm) 10  D: (inch) 25/32" / (mm) 20  D diameter: (inch) 25/64" / (mm) 10  E: (inch) 23/64" / (mm) 9  F: (inch) 1 17/64" / (mm) 32  M: (inch) 2 3/64" / (mm) 52  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load.WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Deep Emergency Dry Storage Supply Box w/Tray - OrangePlano's Emergency Supply Box is water-resistant with an O-ring seal. A deep lift-out tray and top access storage provide plenty of room for all your supplies.Features: Water Resistant O-Ring Seal Comfortable Oversized Handle Top-Access Storage Large Lift-Out Tray Dimensions: 15"L x 8"W x 10"H WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Orange Box Dimensions: 8"H x 10"W x 13"L WT: 3.1 lbs UPC: 024099516129

Read more less

Micro Standard Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 33mm/1-5/16in Weight: 85g/3oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 27mm / 1-1/16in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/ 200lb

Read more less

Sticky Race Gloves - Black - MFeatures: Synthetic leather for maximum durability, minimum stretch and shrinkage  Double aramid stitched in high wear areas  Double thickness palm and fingers for protection and grip  Hook-and-loop wrist closure/adjustment  Low cut wrist band for free movement and ClearStart™ watch visibility and operation  Mesh panels for flexibility and comfort Applications:Used for hand protection and grip Brochure (pdf)

Read more less

Sticky Race Gloves - 3-Finger - Black - MFeatures: Synthetic leather for maximum durability, minimum stretch and shrinkage Double aramid stitched in high wear areas Double thickness palm and fingers for protection and grip Hook-and-loop wrist closure/adjustment Low cut wrist band for free movement and ClearStart™ watch visibility and operation Mesh panels for flexibility and comfort Mesh panels for flexibility, comfort and quick drying - now available in Grey Sticky gloves reduce fatigue by minimising the physical effort required to hold rope Applications:Used for hand protection and gripMaterials: 'Amara’ synthetic leather Double Aramid stitching Brochure (pdf)

Read more less

Series 20 Ball Bearing Orbit Block - Single - Dyneema Lashing - Becket OptionThe incredible Series 20 Orbit Block™ is capable of loads up to 250kg (550lb) while weighing a mere 9 grams. It's so light that it needs to be lashed down!Features: Integrated stainless steel hub to accept lashing attachment and through-sheave becket Suits up to 4mm(5/32") lashing Includes 750mm (30") x 1.7mm(1/16") diam lashing Applications:Control lines on dinghies and catamarans to 5M(16')Materials: Sheave: High compression strength carbon acetal Ball bearings: stainless steel Frame/Cheeks: Nylon Brochure (pdf)

Read more less

Split Cotter Ring - 18.8mm(3/4") IDSuits clevis pins RF260 - RF274Grade 316 Stainless Steel

Read more less

Series 30 Ball Bearing Orbit Block™ - Stand Up SwivelBall Bearing Orbit Blocks™ boast the highest strength-to-weight ratio available. This is achieved through all-composite reinforced polymer materials and multiple attachment options. Their precision design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fiber-reinforced composites in the block head, cleat arms and beckets.Features: Lightweight Highest working load in its class Secure, versatile and secure attachement Low profile and compact Applications: Mainsheet systems and spinnaker sheets on dinghies to 5M(16') Halyard, vang and backstay applications on boats to 5M(16') Control line applications on larger yachts Materials: Sheave: High compression strength carbon black Acetal Ball Bearings: High compression strength Acetal Frame/Cheeks: Toughened, glass fiber reinforced Nylon Link: UV stabilized, multi-strand impregnated SK75 Dyneema® Specifications:Sheave Ø: 30mm(1-3/16")Max. Rope Ø: 8mm(5/16")M.W.L.: 300kg(660lbs)B. L.: 600kg(1,320lbs)Weight: 33g(1.2oz)

Read more less

Series 20 Ball Bearing Block - Double - 2-Axis Shackle HeadFeatures: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Two-Way head can be fixed at 0° or 90° Applications: Dinghy control lines Dinghy vangs Cunninghams Traveller controls Materials: Stainless steel ball bearings UV Stabilized Acetal sheave Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks Specifications:Sheave Ø: 20mm(3/4")Max. Rope Ø: 6mm(1/4")PinØ: 4mm(5/32")M.W.L.: 350kg(770lbs)B. L.: 700kg(1,540lbs)Weight: 42g(1.5oz)

Read more less

Halyard Shackle - 7.9mm(5/16") PinHalyard Shackles have a lever action for easy opening and closing, with a keyed pin for positive lockingFeatures: High strength to weight ratio Grade 316 stainless steel bodies and pins

Read more less

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment.   The unique, super-low friction ball race system runs on a large diameter center boss, which ensures an extremely low friction performance.  Technical Specifications: Overall Diameter - 1- 4/10" (35mm) Hub Width -  .47" (12mm) Bore - .31" (8mm) *Sold as an Individual 

Read more less

Alu Foam Soft Grip Tiller Extension - 900mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Read more less

Battlestick Telescopic Lightweight Alloy - Split Grip - 740-1,210mm(29-48") LongFirm Grip, Precision Control - Ronstan Batlestick™ tiller extensions provide the highest level of control, for quick, decisive helm response in every situation. The Evalon® Grip is a firm non-slip grip material that does not absorb water. End knob for safety and positive hand positioning. Large grip diameter contrasts erganomically with mainsheet diameter to relieve fatigue. Tubes have a black anodised finish for corrosion protection. Urethane Universal Joint provides smooth, uniform rotation in all directions and a quick, firm reponse to steering movements.Applications:Dinghy and small catamaransMaterials Evalon® grip Fluted alloy tube Urethane universal joint Specifications: Type: Tiller Box Dimensions: 2"H x 2"W x 29"L WT: 0.6 lbs UPC: 9316800119608

Read more less

Battlestick Lightweight Alloy - 840mm(33") LongFirm Grip, Precision Control - Ronstan Batlestick™ tiller extensions provide the highest level of control, for quick, decisive helm response in every situation. The Evalon® Grip is a firm non-slip grip material that does not absorb water. End knob for safety and positive hand positioning. Large grip diameter contrasts erganomically with mainsheet diameter to relieve fatigue. Ronstan's unique fluted profile adds extra rigidity to the lightweight alloy section. Tubes have a black anodised finish for corrosion protection. Urethane Universal Joint provides smooth, uniform rotation in all directions and a quick, firm reponse to steering movements.Applications:Dinghy and small catamaransMaterials Evalon® grip Fluted alloy tube Urethane universal joint Specifications: Type: Tiller Box Dimensions: 2"H x 2"W x 33"L WT: 0.45 lbs UPC: 9316800119585

Read more less

Sister Clip - Stainless Steel - LargeEffective means of quickly attaching and detaching ropes58.0mm(2-1/4") Length Specifications: Color: Stainless Box Dimensions: 1"H x 1"W x 2"L WT: 0.3 lbs UPC: 9316800053315

Read more less

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm.Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core

Read more less

Standard Pawl Spring - Small - 20 PackLewmar winch pawl springs are made to fit on most sizes of Lewmar winches and serve as the perfect replacement when performing routine maintenance and service.Features:Designed to be used on Lewmar winches that need a pawl springSpecifications: Material: Stainless steel Size: Small

Read more less

Winch Stripper Rings - EVO 30/40 Replacement stripper rings for Lewmar winch.Compatible With:EVO 30 and 40 winches*Sold as a Pair

Read more less

72mm HTX Block - SingleYears of design and manufacturing experience coupled with collaboration with boat builders, designers, and sailors have resulted in the Lewmar HTX Hardware Range. Drawing upon the design of the Racing Range, the HTX blocks are constructed simply from high-quality materials, providing enhanced reliability. HTX blocks are ideal for frequently adjusted, highly loaded systems using modern line technology and reduced line diameters. Features: Strong aluminum side cheeks Central plain bearing for efficiency at high loads Side thrust Delrin ball bearings Head design inspired by Lewmar Racing Range with grub screw swivel head locking mechanism Technical Specifications: Working Load Limit - 4405lb Weight - 15.6oz Maximum Line Size - .55" (14mm) *Sold as an Individual Owner's Manual (pdf)

Read more less

Tidy-Ups Boat Dock Line Holder - Standard RailsFeatures: Rail mount UV resistant vinyl strap securely holds rope, cords, etc.  Fits 1" - 1-1/4" Rails Not sold in pairs WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Read more less

Self-Locking Large Shackle - Diameter 5mm - 3/16"Features:  Self-locking large shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications:For applications where a large opening shackle is requiredSpecifications: Materials 316 stainless steel grade Working load (lb) 550 WLL (lb) 480 Breaking load (lb) 2420 Weight (lb) 0.035 Dimensions (see 2nd image): A (inch) 1-27/64" B (inch) 25/32" C (inch) 13/64" D (inch) 7/16" D diameter (inch) 13/64" E (inch) 13/64" F (inch) 1-57/64" G (inch) 1-3/8"

Read more less

Tiller Extension Retaining Clip Suits 20mm(3/4") Diameter Tube U.V. Stabilized Nylon Specifications: Type: Tiller Box Dimensions: 2"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800266630

Read more less

HR Quick Release Snap Shackle with Swivel Eye - Length 2-3/4"Features: HR forged (17.4 PH) quick release snap shackle with swivel eye The opening is made by pulling the lanyard Perfect to attach one sheet or halyard Outstanding working and breaking loads Free rotation of the snap shackle thanks to the swivel Applications: For spinnaker operations Perfect for spinnaker sheets and halyards Specifications: Materials HR 17.4 PH stainless steel grade Length (inch) 2 3/4" Working load (lb) 1940 Breaking load (lb) 3300 Weight (lb) 0.13 A (inch) 35/64" B (inch) 7/16"

Read more less

Series 40 Ratchet Orbit Block™ - Single - Auto - Swivel Shackle HeadAutomatic RatchetWith automatic models, the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers.Awesome Ratchet Block Holding PowerQuite simply, Ronstan Ratchet Orbit Blocks™ have the highest holding power available. The sophisticated NC-machined sheave features Generation 2 of our sheave cross-hole geometry. The Series 40 delivers up to 14:1 holding power, almost double that of our nearest competititor.The unique sheave design has 8 gripping faces which directly resist loaded line movement. Traditional designs have an angled resistance to line movement. Our Generation 2 design has straight resistance faces which both distribute the load and minimise rope wear. These faces are offset from the radial line, to draw the rope down into the gripping area when under load.Simple and Secure AttachmentThe Dyneema® Link is easily fitted and is retained securely by a moulded retainer clip. The flexible link can be left with one end attached to the block when fitting - no more lost shackle pins.The system is compatible with Dyneema®/Spectra® strops, webbing and carbon connection points - much more so than steel loop tops or shackles.Smooth Easing of SheetsWith auto models the sheet runs out smoothly and freely as soon as the ratchet mechanism disengages. Low Profile Stand-Up Kit Allows 0™ or 90™ AlignmentStand-up kits feature a clatter-free rubber boot. You can attach the Dyneema® link so that the block is aligned with the stand-up base or across it. It's a neat low-profile solution which allows full articulation.Features: Up to 14:1 holding power - highest available! Smooth easing of sheets Fully Automatic load sensing ratchet engagemen Swivel shackle head for unlmited block rotation Stainless steel shackle head for ultimate durability and compatibility with harsh fixing points Applications: Dinghy mainsheet systems Mainsheet fine tune systems on sportsboats & small keel boats Mainsheet systems on sportsboats using RF7 mainsheet swivel cleat unit Spinnaker and job sheets on dinghies - especially modern asymmetric classes Control line applications on larger yachts Materials: Sheave: Hard anodised Aluminium Ball Bearings: High compression strength carbon black Acetal Frame/Cheeks: Toughened, glass fiber reinforced Nylon Rope Link: UV stabilized, multi-strand impregnated SK75 Dyneema® Specifications:Sheave Ø: 40mm(1-9/16")Max. Rope Ø: 9mm(5/16")M.W.L.: 175kg(385lbs)B. L.: 500kg(1,100lbs)Weight: 44g(1.5oz)

Read more less

Carbo OneTouch Locking Winch HandleLightweight and fast-acting, the Carbo OneTouch ball bearing locking winch handle makes grinding winches easy! Racers will maneuver faster and cruisers will have confidence in a reliable and easy-to-use winch handle. The Carbo OneTouch locks in and out of the winch using its patented locking mechanism and ergonomically designed grab bar. It only takes one hand to set or release the handle—squeeze anywhere along the grab bar with your palm to unlock; release the bar for a secure lock. Harken added SpeedGrip handle technology to the OneTouch for fast and efficient winching. Its independent swivel between the ball bearing knob and hand-grip allows fast trimming using the palm for low-loads, and powerful two-handed grinding when loads are high. At just 590 g (20.8 oz), the Harken Carbo OneTouch is built to be strong but lightweight. The grab bar and main handle are made of the same tough material as our Carbo block line: high-strength, fiber-reinforced composite, UV-stabilized for excellent protection against long-term exposure to saltwater and sun. The handle and grab bar are cross-ribbed and braced for enhanced stiffness. An aluminum grip rod mates seamlessly to a forged aluminum handle insert to manage bending stresses. The black hard-coat-anodized octagonal drive gear is also integrated into the molding process, resulting in an extremely strong, one-piece structure. Its locking pins are tough 316 marine-grade stainless steel. OneTouch is a registered trademark of Donald J. Steiner.Features: Molded urethane knob for comfortable feel and better grip when palming the handle. Handles feature an independent swivel between the knob and handle to keep the wrist straight and arms in the best power position while grinding. The patented locking mechanism features two stainless steel pins that automatically retract when the handle’s full-length grab bar is squeezed, and extend when it is released for a solid, secure lock. Handles feature a ball bearing grip that efficiently transmits power into the winch. Owner's Manual (pdf)

Read more less

Series 5 Flat Base Cheek Block - Stainless Steel CheeksSeries 5 Cheek Block with Stainless Steel cheek. Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area. Specifications: Sheave Diameter 2" (51 mm) Max. Line 7/16" (11 mm) Length 3-5/8" (92 mm) Width 2-7/32" (57 mm) Height 7/8" (22 mm) Fasteners (4) #10 - RH (5 mm) C/C 3" (76 mm) SWL 1750 lbs. (795 kg) Weight 6.9 oz. (196 g) Max Line 7/16" (11mm) 

Read more less

Size 2 Single Cheek BlockPlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 35mm x 12mm Max rope diameter: 8mm Safe working load: 370kg / 815lbs Breaking load: 740kg / 1630lbs Length: 80mm Weight: 73g

Read more less

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easy removal of the cleat.  Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required and removed when not in use - reducing deck clutter and rope snags.Compatible With:.98" (25 mm) wide "T' Track slider systems Technical Specifications: Material (Cleat) - Nylon Material (Base) - Aluminum  Dimensions (Cleat length) - 6.49" (165 mm) Weight - 4.73 oz (134 g) *Sold as an Individual  Specifications: Color: Black Box Dimensions: 3"H x 3"W x 8"L WT: 0.5 lbs UPC: 5035088512539

Read more less

Line Tamer - Grey PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs UPC: 5035088520008 Brochure (pdf)

Read more less

Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of lines, while maintaining minimum wear to both cam and line.Specifications: Max Line Ø: 10mm - 14mm(0.4" - 0.55") FasteningsØ: 5mm (0.20") Fastenings Center: 50mm (1.97") Holding Power: 260kg (573.20lbs) Weight: 50kg (110.23lbs) Specifications: Color: Black Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs UPC: 5035088703005

Read more less

Line Tamer - White PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 8"L WT: 0.1 lbs UPC: 5035088520015 Brochure (pdf)

Read more less

Series 30 Utility Block- Cheek, Curved BaseFeatures: Lightweight durable construction Economical Maintenance free Product Information:Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance.Applications: Vang, cunningham and trapeze retriever systems on dinghies Leech line tackles, bunk adjusters etc on larger yachts Materials: U.V. stabilized Acetal sheaves Grade 316 stainless steel cheeks

Read more less

Little Hawk MK 1 For Dinghies up to 6mThe Little Hawk Mk1 is a small, lightweight and robust Wind Indicator designed to be positioned at the top of the mast on dinghies up to 6m. Very popular with Optimists, the Little Hawk Mk1 is also ideal for any dinghy that wants accurate wind direction information with minimal weight and drag. The Vane Arm is made of super tough nylon is all but indestructible. The aluminum rod can be easily straightened if damaged or easily bent to any required angle. The whole unit is easily assembled straight from the box. Specifications: Vane Arm Length 16.5cm Height 28cm Weight 16 grams. Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 1"H x 4"W x 12"L WT: 0.1 lbs UPC: 652773100403

Read more less

Closed Body Jaw to Swage Tubular Turnbuckle for 1/8" WireJaw to swage- Check Nut Locking.Specifications: 1/8" Wire 1/4" Pin 3" adj.

Read more less

40mm Carbo Air Block with Cam CleatLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave Ø (mm)40 mm Sheave Ø (in)1 9/16 in Maximum line Ø (mm)6 mm Maximum line Ø (in)1/4 in Maximum working load (kg)68 kg Maximum working load (lb)150 lb

Read more less

16mm Block with SwivelThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load.Specifications: Sheave: 16mm / 5/8in. Length: 46mm / 1-13/16in. Weight: 18g / .63oz Shackle pin: 4mm / 5/32in Maximum line: 5mm / 7/32 Maximum working load: 113kg/ 250lb Breaking load: 339kg / 750lb

Read more less

Tiller Extension End KnobSuits 16mm (5/8") Diameter Tube Tiller Extensions Specifications: Type: Tiller Box Dimensions: 2"H x 2"W x 5"L WT: 0.1 lbs UPC: 9316800539253

Read more less

Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features: Effective and reliable means of automatic bailing Made of stainless steel and guaranteeing years of trouble free servicing Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 7"L WT: 0.85 lbs UPC: 9316800000005

Read more less

Quick Release Lever - 5/16" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of 2500 lbs. A positive stop is provided to prevent jamming fingers between the fitting and wire when thrown open under load and the large surface area of the push pad makes it easier to close the lever under load. Lever take-up is 2-1/8″ to an over-center position and comes with a quick-release pin for positive locking. The extender arm may be had in either 1/4″ or 5/16″ pin size. This is an essential piece of hardware on Catamaran shrouds to allow the crew to right the boat after a capsize. Without it, another boat or extraordinary effort is required. Trailer-able boats up to 26 feet find that a lever on the forestay greatly facilitates stepping and unstepping the mast.Specifications: Approximate breaking strength = 2,500lbs Safe working load = 1000lbs Extender number of holes = 3

Read more less

Mini Gate Hook with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Read more less

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Read more less

Open Body Jaw to Swage Turnbuckle for 3/16" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 3/16" Wire 1/4" Pin 3" adj.

Read more less

16mm Double BlockThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race.Specifications: Sheave: 16mm / 5/8in. Length: 43mm / 1-11/16in. Weight: 27g / .94oz Maximum line: 5mm / 7/32in Maximum working load: 204kg/ 450lb Breaking load: 544kg / 1200lb

Read more less

Rigging Tape - Black - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or people. When used as directed, the tape actually bonds to itself and makes one solid piece. It can also be used on hot objects for an emergency repair or radiator hoses, etc. Rigging tape is sold in black or white and packaged in a reusable, retail clamshell pack with color header and instructions.  Specifications: Color: Black Box Dimensions: 2"H x 5"W x 8"L WT: 0.25 lbs UPC: 762799501167

Read more less

Diamond Pad EyeThis pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds.Specifications: 1/4 in. Bail Length: 2-5/8 in. Width: 1-1/2 in.

Read more less

29mm Single Bullet BlockLow-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Features: Sheave: 29mm (1-1/8") Maximum Line: 8mm (5/16") Maximum Working Load: 136kg (300lb)

Read more less