Gyb'Easy Boom BrakeGybe safely with Gyb'Easy, the Wichard boom brake. Why a boom brake? Gybing remains one of the most challenging operations on a sailing boat even for experienced sailors and can possibly generate injuries and material damage. Gyb'Easy is an efficient and safe solution to reduce such risks.Concept: Thanks to the frictions of the specific line called Gyb'Flex passing over the boom brake, the boom is allowed to gybe smoothly and without jerks. The more the line passes over the openings, the more the friction is increased and hence the brake efficiency.Settings of the Gyb'Easy: The adjustment is made thanks to the tension of the line. 3 different positions exist for a better adaptation of the mainsail and wind conditions.Easy installation: It takes a few minutes to install it on an eye strap of the boom. Two different fittings can be implemented to fit with all the deck configurations.Technical Data: Can be used on mainsail areas below 40 sqm Gyb'Flex line supplied (part#: 7148): Length: 16 m / Diameter: 11 mm Weight (g/lbs): 600g/1.323lbs Materials: Anodized Aluminum Applications:Gybing operations

Read more less

Lyf'Safe Jackline Kit - 11M/36'Either sailing solo or fully crewed, operating on the foredeck in most conditions requires extra attention and safety precautions. Lyf'Safe by Wichard is a complete jackline kit allowing safer operations and offering added value to the crew.Why Choose Lyf'Safe?Adaptable and universal: Lyf'Safe can be tailored to the length of the boat (using the adjuster) and can be fitted onto most deck fastenings (pad eyes, pullpit, pushpit, cleats...).Features: Ready-to-use: easy to install, Lyf'Safe does not require additional fastening components such as shackles. Reflective: thanks to its reflective stripe and photoluminescent casings, Lyf'Safe can be easily identified when sailing at night. The locking system of the webbing: the adjuster casing prevents any accidental adjustment or release of the webbing. Resistant: the anti-abrasion edges to the webbing prevent early wear and fraying. Aesthetic: Lyf'Safe is an elegant solution suiting most modern deck designs. Anti-chafing: the soft elastomer casing isolates the deck, eliminating noise and unpleasant vibrations. Lyf'Safe Includes: 2 webbings (material: polyester) with 1 end with a loop and 1 free end 2 forged adjusters 2 casings Technical Specifications: For boats less than 12.20 m (40') Webbing length: 11 m (36') Webbing width: 25 mm Sewing resistance: 3 tons Applications:Safety on board

Read more less

Boomstrut - Black for Boats 20-25'Boomstrut 44021 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom & mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars. This version comes with blacks rods. Also available in white, part number 44020.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Boomstrut - Black for Boats 25-30'Boomstrut 44031 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

U-Bolt Pad Eye - 12mm Diameter - 15/32" - 110mm Length - 4-21/64"Features: Fully drop forged product with high-quality stainless steel Outstanding working and breaking loads For any kind of fastening applications (shrouds, lifelines, blocks...) Delivered with bolts and counter-plate Max tightening torque: 60 Nm Applications:Various fastening applications: shrouds, lifelines, blocks…Specifications: Materials: 316L stainless steel grade Working load: (lb) 14100 / (kg) 6400  Breaking load: (lb) 22040 / (kg) 10000  Weight: (lb) 0.703 / (g) 319  Dimensions: A: (inch) 1 47/64" / (mm) 44  B: (inch) 1 11/32" / (mm) 34  C: (inch) 1 31/32" / (mm) 50  D diameter: (inch) 15/32" / (mm) 12  Length: (inch) 4 21/64" / (mm) 110  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Boomstrut - Black for Boats 30-35'Boomstrut 44036 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Cockpit Bag - LargeStore your drinks, sun cream, etc, in this handy storage bag.Features: Attach and remove using Blue Performance screw-in hooks (not included) Flap with Velcro closure Double external front pockets with mesh Two inner pockets Waterproof, mildew, and UV-resistant material Ripstop lining Specifications (L x W): Large: (inch) 18.5 x 11.8 x 2.0 / (mm) 470 x 300 x 50*Sold as an Individual Specifications: Type: Bags Box Dimensions: 2"H x 15"W x 20"L WT: 2.7 lbs UPC: 8717933038247

Read more less

60mm Single Aluminum Element Block with Swivel & BecketElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Features: Sheave Ø (mm): 60 mm Sheave Ø (in): 2-3/8 in Maximum line Ø (mm): 14 mm Maximum line Ø (in): 9/16 in Maximum working load (kg): 1100 kg Maximum working load (lb): 2425 lb

Read more less

29mm Double Carbo Air BlockLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.Specifications: Sheave: 29mm / 1-1/8in. Length: 54mm / 2-1/8in. Weight: 34g / 1.2oz Maximum line: 8mm / 5/16in Maximum working load: 299kg/ 660lb Breaking load: 737kg / 1625lb

Read more less

Size 5 54mm Plain Bearing Pulley Block Single Block SwivelThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up to 12mm 7/16" rope. Quick Guide (pdf)

Read more less

Boomstrut - Silver/White for Boats 30-35'Boomstrut 44035 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Size 4 58mm Plain Bearing Pulley Upright BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-bearing components and interior frame are from marine grade 316 stainless steel and both plain and ball-bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up 12mm (7/16″) rope. Quick Guide (pdf)

Read more less

Tiller Extension 900mm Carbon Fiber - Blue Soft GripFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during long periods of use. *Includes tiller clip.

Read more less

Size 6 64mm Plain Bearing Pulley Single Block Fixed EyeThe Size 6 Barton blocks are designed as our high-load cruiser block range and are of rugged construction. It features high-grade injection molded side plates, with all load-carrying components from 316-grade stainless steel. Side plates are through-bolted and riveted for added strength and security. This good-looking and versatile range is designed for use on larger cruising and racing yachts. All are designed for ease of use with our ball-bearing mainsheet traveler system.The 64mm sheave Size 6 high load cruiser block range is of rugged construction, featuring high-grade injection molded side plates, with all load-carrying components from 316-grade stainless steel. Side plates are through-bolted and riveted for added strength and security. This good looking and versatile range is designed for use on larger cruising and racing yachts. All are designed for ease of use with our ball bearing mainsheet traveller system.Designed around a 64mm (2 1/2") sheave and to work with 14mm (9/16") ropes.

Read more less

Tiller Extension 1000mm Carbon Fiber - Blue Soft GripFeatures the latest in uni-directional 16mm carbon fiber tube, which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during long periods of use. *Includes tiller clip.

Read more less

'K" Cam MiniManufactured from Dupont Kevlar/Zytal, K Cams are available in 3 sizes to accept lines up to 14mm (9/16”) in diameter. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins.'K' cams are very strong, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of line, whilst maintaining minimum wear to both cam and line.'K' Cam bases feature a stainless steel wear bar for prolonged life.The cams utilise stainless steel leaf springs which give a smooth but positive action and a longer life span than conventional wire springs.'K' cam cleats come with a range of accessories including Pillar fairleads, Wire fairleads, and Top fairleadsSpecifications: Holding power 190kg (420lbs) Maximum line 10mm (3/8”) Hole centres 30mm (1 3/16) Weight 17g (0.6oz) Specifications: Color: Black/White Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 5035088701001

Read more less

Size 1 30mm Plain Bearing Pulley Block Double with SwivelThe Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durability. Also available in ball bearing sheave options, the lightweight modern design is available in variations that allow for a multitude of uses on every size craft.The 30mm sheave Size 1 block range is designed with an internal steel frame for added strength and durability. Available in plain and ball-bearing sheave options, the lightweight modern design is available in variations that allow for a multitude of uses on every size craft.Suitable for up to 8mm (5/16") rope. Quick Guide (pdf)

Read more less

Boomstrut - Silver/White for Boats 25-30'Boomstrut 44030 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Size 5 54mm Plain Bearing Pulley Block Reverse ShackleThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up to 12mm 7/16" rope. Quick Guide (pdf)

Read more less

Size 5 54mm Plain Bearing Pulley Block Single Block Fixed EyeThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up to 1 to 2mm 7/16" rope. Quick Guide (pdf)

Read more less

Size 7 70mm Plain Bearing Pulley Block Single SwivelThe size 7 Barton high-load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber nylon reinforced molded side plates with an internal 316 stainless steel frame that is through-bolted and riveted for added strength and durability. This well-designed and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 70mm sheave Size 7 high load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber nylon reinforced molded side plates with an internal 316 stainless steel frame that is through-bolted and riveted for added strength and durability. This well designed and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Built with 70mm (2 13/16") sheaves and designed for a maximum rope size of 14mm – 9/16" rope.

Read more less

Boomstrut - Silver/White for Boats 20-25'oomstrut 44020 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom & mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Boomstrut – Dinghy - Black for Boats Up To 16"The Dinghy Boomstrut 44001 is manufactured and anodized in black only. It has a black webbing support sling that is fully adjustable and fits any boom. It is held in place by a return line to the mast that runs under the boom. The design allows rotational roll on the boom, so the sail shape is maintained. Suitable for dinghies with a maximum boom tip weight of 5kg. Works in conjunction with the existing kicker or rope vang fitted to the boat.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.

Read more less

Boomstrut – Silver/White for Boats Up To 20'Boomstrut 44010 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom & mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fiber, or aluminum spars.Six sizes to suit yachts up to 12m/40ft LOAPatented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.Maintenance-free, durable designEliminates friction and sliding parts.Improved performanceLess weight and windage.Easy installationThere’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.Simple to follow instructionsThe Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.Carefully designed & constructedThe Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.

Read more less

S-Hook - 9.5mm(3/8") DiameterS-hooks feature a closed eye and long return leg to ensure a positive attachment and avoid accidental release.Grade 316 stainless steel Specifications: Color: Stainless Box Dimensions: 0"H x 3"W x 4"L WT: 0.25 lbs UPC: 9316800039739

Read more less

Rubber Spreader Boot - Pair - Small - WhiteFeatures: White Rubber Spreader Boot Small Spreader Insert: 1/2" - 1-1/2" Stay Insert: 1/8" Length: 1-5/8" Height: 2" Specifications: Type: Spreaders Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 725060920210

Read more less

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs.

Read more less

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes include pins. Please see the attached chart for the exact dimensions.

Read more less

Double Jaw Rigging Toggle - 3/8" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs.

Read more less

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free. Specifications: T-316 Stainless Steel construction Supplied with backing plate Specifications: Color: Stainless Box Dimensions: 1"H x 4"W x 7"L WT: 0.6 lbs UPC: 762799485856

Read more less

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Read more less

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Read more less

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Read more less

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Read more less

Quick Release Pin - 3/16" x 9/16"Specifications: Diameter: 3/16" Grip Length: 9/16" Use with: 15-212

Read more less

Quick Release Pin - 1/4" x 1"Specifications: Diameter: 1/4" Grip Length: 1" Use with: 14-205 and 14-206

Read more less

Cotter, Ring & Clevis Pin Parts KitKit Contents: (30) Clevis Pin Dia. 3/16", Grip 9/32" (30) Clevis Pin Dia. 3/16", Grip 13/32" (10) Clevis Pin Dia. 3/16", Grip 17/32" (6) Clevis Pin Dia. 1/4", Grip 13/32" (30) Clevis Pin Dia. 1/4", Grip 1/2" (6) Clevis Pin Dia. 5/16", Grip 9/16" (6) Clevis Pin Dia. 5/16", Grip 11/16" (2) Clevis Pin Dia. 3/8", Grip 5/8" (6) Clevis Pin Dia. 3/8", Grip 13/16" (2) Clevis Pin Dia. 7/16", Grip 7/8" (1) Clevis Pin Dia. 1/2", Grip 3/4" (2) Clevis Pin Dia. 1/2", Grip 1" (50) Circular Pins, 3/16" & 1/4" (10) Safety Pins, 3/16" & 1/4" (100) Cotter Pin, 1/16" x 1/2" (50) Cotter Pin, 3/32" x 3/4" (25) Cotter Pin, 1/8" x 1" (10) Cotter Pin, 5/32" x 1-1/4"

Read more less

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 1/8" Wire 1/4" Pin 3" adj.

Read more less

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj.

Read more less

Lever Arm Crimper ToolC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life. This specific tool is built to handle the stress of crimping stainless fittings. "Nicropress" tools were designed to crimp soft copper and aluminum oval and stop sleeves only. Specifications: Two cavities for 1/8" and 3/16" hand crimp fittings Good production tool for the dealer

Read more less

Jaw/Jaw Tubular Turnbuckle T-Style 3/8-24 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. Specifications: Jaw with "T" Toggle Construction Machine swage Bronze body/ 316 stainless ends Wire size: 1/4" Breaking strength: 7,000 pounds Safe working load: 2,800 pounds Thread size: 3/8-24 Pin to pin length: 9-1/2" (closed) 13-3/4" (open) Body length: 5-5/8" Pin diameter: 3/8"  Weight: 14 ounces

Read more less

Cotter Pin KitKit Contents: (6) Cotter Pin 1/16" x 1/2" Type 316 Stainless Steel (6)Cotter Pin 3/32" x 3/4" Type 316 Stainless Steel (4) Cotter Pin 1/8" x 1" Type 316 Stainless Steel (10) Cotter pin 5/32" x 1-1/4 Type 316 Stainless Steel (10) Circular Pin 3/16" & 1/4" with Starter (6) Safety Pin 3/16" & 1/4"

Read more less

Rubber Spreader Boot - Pair - Medium - WhiteFeatures: White Rubber Spreader Boot Medium Spread Insert: 1" - 2" Stay Insert: 3/16" Length: 2-3/8" Height: 5-3/4" Specifications: Type: Spreaders Box Dimensions: 2"H x 3"W x 6"L WT: 0.3 lbs UPC: 725060920111

Read more less

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Read more less

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening.

Read more less

Size 3 45mm Plain Bearing Pulley Block Double with SwivelThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fiberglass filled nylon and Acetal sheaves to maximize their strength while keeping weight to a minimum. Suitable for use as mainsheet, vangs, lead blocks, or wherever a powerful and compact purchase system is required on dinghies, dayboats, and lightweight cruisers.Suitable for up to 10mm (3/8") rope. Quick Guide (pdf)

Read more less

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during long periods of use. *Includes tiller clip. Quick Guide (pdf)

Read more less

Size 0 20mm Plain Bearing Pulley Block Double Fixed EyeThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less