5.5" Thermal Camera Mount Aft Leaning for M100 & M200 SeriesGet the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority. Features: 5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras Elevates electronics for optimum performance and allows for flexibility in installation Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation Compatible Units: FLIR M132 FLIR M232 Specifications: Orientation: Aft-leaning Material: Marine-grade aluminum Finish: Powder coated white Specifications: Type: Aft Leaning Mount Height: 5.5" Box Dimensions: 6"H x 9"W x 10"L WT: 2.5 lbs UPC: 015568084768

Read more less

Light Bar Top - WhiteWhite universal box top for all-round, masthead, and stern (lights not included).

Read more less

Cable Seal with Cover - White Powder Coated Stainless Steel for Wire Up to 10.6mm/0.5"The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 8"L WT: 0.9 lbs UPC: 727908835779 Brochure (pdf)

Read more less

Cable Seal with Cover - White Powder Coated Stainless Steel for Wire Up to 27.55mm/1.08"The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 8"L WT: 0.75 lbs UPC: 727908835762 Brochure (pdf)

Read more less

2" Diameter Compact Light Bar f/Thermal Cameras, Spotlights & Nav Light To Clear Closed Dome Radars *Must Pick an LTB TOPA compact 2” diameter light bar designed to fit Seaview modular mounts that will elevate most searchlights, thermal cameras with the universal plate, and a nav light above closed dome radars. This will clear 18-24" diameter closed dome radars with the exception of Raymarine RD424. Works with Mounts ending in M1 or M2.* Will work for all FLIR models, WITH THE EXCEPTION OF THE FLIR M300C, M332, M364, M364C** Will clear 18"-24" closed dome radars, WITH THE EXCEPTION OF THE RAYMARINE RD424 Specifications: Type: Light/GPS Brackets Box Dimensions: 12"H x 12"W x 37"L WT: 10.45 lbs UPC: 727908835748 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Domes Requires LTB Top - BlackSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights. Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Only LTB-R, LTB-S and LTB-S24 can fold over. Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts. This does not apply to the LTB-SF, LTB-OA and LTB-OA-6 light bars. Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 12"W x 31"L WT: 2.4 lbs UPC: 727908835397 Quick Guide (pdf)

Read more less

5" Modular Mount Aft Raked 7x7 Base Top Plate Required - BlackThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. A Seaview Modular Top Plate is required and sold separately!Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately. Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 5" Box Dimensions: 7"H x 11"W x 12"L WT: 5.4 lbs UPC: 727908835410 Quick Guide (pdf)

Read more less

Modular Plate for Most Closed Domes & Open Arrays - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 4.8 lbs UPC: 727908835441 Quick Guide (pdf)

Read more less

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or LargerAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.Heavy DutySix rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables. Specifications: Type: Mast Mount Box Dimensions: 6"H x 12"W x 20"L WT: 7.95 lbs UPC: 727908835540 Quick Guide (pdf)

Read more less

Multi Cable Seal with Black Coated Cover - Stainless Steel Wire - 2-17mmThe Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 6"L WT: 0.5 lbs UPC: 727908835571 Quick Guide (pdf)Brochure (pdf)

Read more less

Cable Seal with Cover - Black Powder Coated - Stainless Steel Wire - Size 2-15mmThe Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 7"L WT: 0.5 lbs UPC: 727908835564 Quick Guide (pdf)Brochure (pdf)

Read more less

Cable Seal with Cover - Black Powder Coated - Stainless Steel Wire - Size 2-10mmThe Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 8"L WT: 0.4 lbs UPC: 727908835557 Quick Guide (pdf)Brochure (pdf)

Read more less

PM5FM38 Thermal Camera Mount for FLIR M300 Series Vertical 8"Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 8" Box Dimensions: 7"H x 13"W x 13"L WT: 5.5 lbs UPC: 727908835519 Quick Guide (pdf)

Read more less

ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 14"L WT: 3.4 lbs UPC: 727908835496 Quick Guide (pdf)

Read more less

Mast Bracket with Flybridge Adapter Kit18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms.Features: Anodized Marine Grade Aluminum and Powder Coated Brilliant White Heavy duty swiveling feet fit most mast and poles adding more strength and durability to platforms Models available for all brands of radomes Specifications: Construction: Aluminum Type: Mast Mount Box Dimensions: 6"H x 12"W x 20"L WT: 7.9 lbs UPC: 727908835625

Read more less

RW4-5 Degree Wedge Mount for Simrad TX06S & TX10SImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Simple & Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.DurableMade from marine grade polymer King Starboard. Specifications: Construction: Polymer Type: Wedges Box Dimensions: 2"H x 13"W x 13"L WT: 2.3 lbs UPC: 839662002097 Quick Guide (pdf)

Read more less

LTB-90 Light Bar Clamp f/LTB-R, LTB-S LTB-S24 & LTB-13 Light bars, allows for quick fold over of Light BarThe LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for a Seaview light bar. Great for trailering, dry-stack storage, and winter wrapping your vessel. This kit will only work with Seaview top plates ADAR1, ADAS1 & ADAS2 when spreaders are NOT usedCompatible with: LTBR LTBS LTBS24 LTB13 LTBRSS Specifications: Type: Light/GPS Brackets Box Dimensions: 4"H x 5"W x 5"L WT: 0.35 lbs UPC: 727908835120

Read more less

1-1/4" Light Bar 13" for FLIR & Searchlights Fold Over - 90° - Must Pick a LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts.  Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 15"W x 15"L WT: 3.2 lbs UPC: 727908835113 Quick Guide (pdf)

Read more less

16.75" Dual Mount Pre-Drilled for Most Closed Dome Radars Top for FLIR Searchlight Satellite DomesInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate Interference  A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. Specifications: Type: Dual Mount Height: 16.75" Box Dimensions: 14"H x 18"W x 36"L WT: 26 lbs UPC: 727908835137 Quick Guide (pdf)

Read more less

12" Aft Leaning Camera MountGet the most out of your camera by using a Seaview Camera Mount. This Camera Mount is 12.5" tall and is aft leaning. The four pre-drilled 7″ × 7″ base plate makes it very simple and easy to install.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space Saving DesignThe small 7"x 7" base foot print makes this a great solution to an installation where space is an issue.Fits: Raymarine - T200,T300,T400 Flir - MD324, MD625, M625S, M625CS, M612L, M617CS, M618CS Comnav - Explorer V2, V3 Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 13"H x 13"W x 17"L WT: 6.4 lbs UPC: 839662009331

Read more less

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 10"W x 10"L WT: 3.9 lbs UPC: 015568089824 Quick Guide (pdf)

Read more less

Retrofit Cable Seal - Grey - Up to 0.39" (10mm) Diameter CableThe Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! The Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! These Seaview Retrofit Cable Seals provide a waterproof pass-through for the antenna, transducer, lights, power, and other cables without removal of the factory-installed cable connector. Many Applications Marine - Radars, satellite domes, cameras, lights and more! Automotive - Seal the cables from your exterior lights going into your vehicle. Satellite domes for RV's. Home - Easy installation to clean up current cables entering the house. Paintable shell to match the color of your house. Small in diameter and profile to fit in most applications. Extremely durable in all weather conditions. Easy InstallationInstall with cable in place! No need to remove cable connectors or cable at all. Features captive nuts. All hardware provided for easy installation. WaterproofIPX6 and IPX7 waterproof rating. Uses a tapered watertight rubber seal and base gasket. Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 8"L WT: 0.2 lbs UPC: 015568069611 Quick Guide (pdf)Brochure (pdf)

Read more less

Top Plate for FLIR M100 & M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard. Specifications: Type: Adapters Box Dimensions: 5"H x 13"W x 17"L WT: 3 lbs UPC: 015568089831 Quick Guide (pdf)

Read more less

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 3"H x 13"W x 13"L WT: 2.8 lbs UPC: 839662002622 Quick Guide (pdf)

Read more less

Polished Stainless Steel Cable Seal - Multi Cables (up to 2-17mm Each)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 5"W x 8"L WT: 0.6 lbs UPC: 015568068461 Quick Guide (pdf)Brochure (pdf)

Read more less

Polished Stainless Steel Cable Seal - 2 Cables (2-15mm Each)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 5"W x 8"L WT: 0.4 lbs UPC: 015568068454 Quick Guide (pdf)Brochure (pdf)

Read more less

Polished Stainless Steel Cable Seal - 1 Cable (2-10mm)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 5"W x 8"L WT: 0.4 lbs UPC: 015568068447 Quick Guide (pdf)Brochure (pdf)

Read more less

Grey ABS Plastic Cable Seal - UV Stable - 1 Cable (2-10mm)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 015568068386 Quick Guide (pdf)Brochure (pdf)

Read more less

Direct Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 11"W x 11"L WT: 2.3 lbs UPC: 015568089794 Quick Guide (pdf)

Read more less

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 3.8 lbs UPC: 015568089770 Quick Guide (pdf)

Read more less

Seaview Stainless Steel Guard for 12-20" Radar DomesProtect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna. Compatible Units: Furuno - 15" - 18" Radomes, DRS42 (1st Watch) Garmin - GMR18(HD), GMR18x(HD) Radomes  JRC - JUE 250, JUE 33 (14")  Koden - 18" (MDC 900 Series) Radomes  Lorenz - 12" - 24" Radomes  Lowrance - 3G, 4G Radomes  Raymarine - 18" Radomes, 33STV, 37STV, 45STV  Seiwa/Tech Marine - 12" - 24" Radomes  Simrad - 3G, 4G, HALO20  Sitex - 18" (T760/T921) Radomes Thrane & Thrane - FB150, FB250, Fleet33, Fleet33+  Specifications: Type: Radar Guards Box Dimensions: 4"H x 22"W x 22"L WT: 6.6 lbs UPC: 839662005753 Quick Guide (pdf)

Read more less

Seaview SPOD Sail Pod BoxMax Usable Face: 14.75" x 5"Max Cut Out Area: 13.875" x 4.125"The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.Achieve the Perfect ViewThe SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation. Stainless Steel ClampsTwo high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.Optional Accessory PodOne of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 14.75"W x 5"H Box Dimensions: 5"H x 6"W x 16"L WT: 6 lbs UPC: 839662008860 Quick Guide (pdf)Brochure (pdf)

Read more less

RM-GOL-1 Rail Mount for Golight/SearchlightsMount that Golight or any other search light of yours onto your rail with a Seaview Search Light Rail Mount! The mounting plate is made from a machined piece of King Starboard. King Starboard is a marine grade polymer that is able to withstand the effects of moisture, salt water and direct sunlight. A high polished stainless steel clamp is used to mount onto 3/4" and 1-1/4" diameter rails.Cable ManagementThe Search Light Rail Mount unique design allows you to route the cables inside the mount and through the rail. Eliminating any visible cabling.High Polished HardwareA high polished stainless steel clamp provides a very clean look and will match your rail.*Compatible with all GoLight models Specifications: Type: Light/GPS Brackets Box Dimensions: 4"H x 4"W x 8"L WT: 2.6 lbs UPC: 839662002783 Quick Guide (pdf)

Read more less

Modular Dual MountThe 28" tall Seaview Dual Mount is pre-drilled for up to 4.5' Open Array Radar. The top is for Satellite domes. This Dual Mount is for Open Array Radars & Satdomes or Cameras. The oval hollow mast section allows for easy cable management. The small 10" x 10" foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as spreaders, lightbars and floodlights.Please note that a Top Plate is required (sold separately) Specifications: Type: Dual Mount Box Dimensions: 20"H x 24"W x 43"L WT: 33.15 lbs UPC: 839662009058 Quick Guide (pdf)

Read more less

PM5-FMT-8Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base FotprintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 10"W x 10"L WT: 4.4 lbs UPC: 839662009300 Quick Guide (pdf)

Read more less

PM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat.Features Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 1.2 lbs UPC: 839662002325 Quick Guide (pdf)

Read more less

Universal Box Top for All-Around, Masthead and Stern LightsThis Light Bar Top is a universal box top for all-round, masthead & stern lights. Please note that lights are not included. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 1.2 lbs UPC: 839662009256 Quick Guide (pdf)

Read more less

LTB Top Universal for Mounting Your Light/GPSThe LTB-U1A is a Universal Light Bar Top for mounting your own light and or GPS. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 1 lbs UPC: 839662009539 Quick Guide (pdf)

Read more less

LTB Top Standard 1"-14 Thread for GPS or Wind TransducerAdapter to mount a GPS unit or wind transducer. Uses standard 1"-14 threads. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 5"W x 5"L WT: 0.3 lbs UPC: 839662009522 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for 18" or Smaller Satdomes - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 7"H x 13"W x 32"L WT: 4.5 lbs UPC: 839662009201 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Dome Radar - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 13"W x 31"L WT: 3.5 lbs UPC: 839662009188 Quick Guide (pdf)

Read more less

Modular Top Plate for Flir M or Ray T Series Thermal CamerasSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.King StarboardMade of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.  Specifications: Type: Adapters Box Dimensions: 1"H x 11"W x 16"L WT: 3.5 lbs UPC: 839662009171 Quick Guide (pdf)

Read more less

Modular Plate for Intellian/KVH/Glomex/Thrane & Thrane/Raymarine/Sea-King/Sea-Tel/VDOSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 4"H x 15"W x 15"L WT: 5 lbs UPC: 839662009133 Quick Guide (pdf)

Read more less

12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate RequiredInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately* Specifications: Type: Dual Mount Height: 12.5" Box Dimensions: 14"H x 18"W x 36"L WT: 23 lbs UPC: 839662009027 Quick Guide (pdf)

Read more less

18" Modular Mount AFT Raked 10 x 10 Base Plate for Large Sat Domes - 18" Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Aft Leaning Mount Height: 18" Box Dimensions: 13"H x 21"W x 21"L WT: 14.8 lbs UPC: 839662008990 Quick Guide (pdf)

Read more less

12" Modular Mount AFT Raked 10" x 10" Base Plate for Large Sat Domes - 18" Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 13"H x 13"W x 17"L WT: 11.5 lbs UPC: 839662008976 Quick Guide (pdf)

Read more less

18" Modular Mount Vertical 8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Vertical Mount Height: 18" Box Dimensions: 13"H x 13"W x 20"L WT: 8.6 lbs UPC: 839662009102 Quick Guide (pdf)

Read more less

5" Vertical Modular Mount w/8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 9"W x 10"L WT: 5.2 lbs UPC: 839662009089 Quick Guide (pdf)

Read more less