Seaview CGM90W Cable Seal Multi Cable up to 6.35mm Multi Cable up to 6.35mmModel: CGM90W Improved Shape & Design: Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on). Unlike other brands, our inner rubber seal is flush with the top of the Cable Gland so that water does not have a place to collect. Watertight: Tapered rubber seal forms watertight installation. Base gasket also provided for clean water tight installation. Seaview Cable Glands have waterproof ratings of IPX6 and IPX7. Easy Installation: Each Cable Gland is supplied with a blank rubber tapered seal that has a molded location to drill and cut. Captive nuts make for easy assembly. Cable connectors do not need to be removed during installation. Stainless steel fasteners included. The Seaview horizontal cable seals (90 degree cable seal) are a streamlined, waterproof seal that has a horizontal orientation.The CG2090W cable seal fits cable diameters up to 0.53" (13.5mm). Max connector size approx. 0.375"-0.5" (9.5mm-12.7mm) depending on connector length and type.The CGM90W cable seal fits cable diameters up to 0.25" (6.35mm). Max connector size approx. 0.3125"-0.375" (7.94mm-9.53mm) depending on connector length and type.These have a plastic housing (white or black) that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview CGM90 Cable Seal Multi Cable up to 6.35mm Black Plastic CoverModel: CGM90 Improved Shape & Design: Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on). Unlike other brands, our inner rubber seal is flush with the top of the Cable Gland so that water does not have a place to collect. Watertight: Tapered rubber seal forms watertight installation. Base gasket also provided for clean water tight installation. Seaview Cable Glands have waterproof ratings of IPX6 and IPX7. Easy Installation: Each Cable Gland is supplied with a blank rubber tapered seal that has a molded location to drill and cut. Captive nuts make for easy assembly. Cable connectors do not need to be removed during installation. Stainless steel fasteners included. The Seaview horizontal cable seals (90 degree cable seal) are a streamlined, waterproof seal that has a horizontal orientation.The CG2090 series cable seal fits cable diameters up to 0.53" (13.5mm). Max connector size approx. 0.375"-0.5" (9.5mm-12.7mm) depending on connector length and type.The CGM90 series cable seal fits cable diameters up to 0.25" (6.35mm). Max connector size approx. 0.3125"-0.375" (7.94mm-9.53mm) depending on connector length and type.These have a plastic housing (white or black) that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Read more less

Seaview SVLTP12LED 24in Light Post with LTBLED12 Navigation LightModel: SVLTP24LEDC5Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25in in diameter with a 2.75in round base plate.Includes LTBLED12 round Seaview 3NM LED combination mast head allround lightWhat's in the Box: SVLTP24 24in Light Post LTBLED12 Navigation Light

Read more less

Seaview SVLTP12LED 12in Light Post with LTBLED12 Navigation LightModel: SVLTP12LEDC5Seaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25in in diameter with a 2.75in round base plate.Includes LTBLED12 round Seaview 3NM LED combination mast head allround lightWhat's in the Box: SVLTP12 12" Light Post LTBLED12 Navigation Light

Read more less

Seaview LTBU1ALED12C5 Universal Top mount with 12in Light Bar and LTBLED12 LightModel: LTBU1ALED12C5Universal light bar top for GPS or wind instrument with 12in light post and LED nav light (LTBU1A + SVLTP12 + LTBLED12C5)What's in the Box: LTBU1A Universale Top Mount SVLTP12 12in Light Post LTBLED12 Round Seaview 3NM LED combination mast head allround ligh

Read more less

Seaview LTBLED12C5 Modular Light C5 Certified RoundModel: LTBLED12C5(WHITE) C5 certified Round Seaview 3NM LED combination mast head allround light / IP67 watertight with 7' of wire (12v). USCG approved for boats up to 20 meters (65.6') in length. For top of modular light bars.

Read more less

Starlink Mini Mounting Bracket for 1"-1-1/4" Rails - Supplied with Base Bracket for 1"-14 Threaded BaseFeatures:Starlink Mini mount bracket for rails 1" - 1-1/4"Supplied With:Base bracket for 1"-14 threaded base

Read more less

C5 Certified Light Bar Top with LTBLED12C5 Masthead Light & Threads for GPSUniversal light bar top for GPS or wind instrument with 12" light post and LED navigation light (LTBU1A + SVLTP12 + LTBLED12C5). Specifications: Height: 12" Type: Light/GPS Brackets Box Dimensions: 5"H x 9"W x 16"L WT: 2.2 lbs UPC: 850073256008

Read more less

White Plastic Horizontal Cable Seal for Multiple WiresThe Seaview horizontal cable seal (90-degree cable seal) is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53” (13.5mm). Max connector size approx. 0.375"-0.5" (9.5 mm-12.7 mm) depending on connector length and type.It has a plastic housing (white or black) that is strong and impact-resistant, with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with a drill tube allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 1"H x 3"W x 6"L WT: 0.25 lbs UPC: 850073256060

Read more less

Black Plastic Horizontal Cable Seal for Multiple WiresThe Seaview horizontal cable seal (90-degree cable seal) is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53” (13.5mm). Max connector size approx. 0.375"-0.5" (9.5 mm-12.7 mm) depending on connector length and type.It has a plastic housing (white or black) that is strong and impact-resistant, with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with a drill tube allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Cable Glands Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 850073256053

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M2This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M1This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

5" Aft Leaning Mount with ADAR1 Top PlateThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice. Included ADAR1 Top PlateSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Specifications: Height: 5" Type: Aft Leaning Mount Box Dimensions: 10"H x 14"W x 14"L WT: 12.1 lbs UPC: 727908835588

Read more less

Modular Plate for Most Closed Dome and Open Array RadarsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 4.6 lbs UPC: 839662009119 Quick Guide (pdf)

Read more less

Universal 24" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno Garmin JRC Koden KVH Raymarine Simrad Sitex Specifications: Type: Mast Mount Box Dimensions: 7"H x 16"W x 21"L WT: 5.4 lbs UPC: 839662005227

Read more less

Universal Mast Mount Platform for 12"18" RadomeSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno JRC Koden Lorenz Sitex VDO Specifications: Type: Mast Mount Box Dimensions: 5"H x 9"W x 17"L WT: 5.1 lbs UPC: 839662005234 Quick Guide (pdf)

Read more less

Seaview APXG3DMV2 Starlink Standard Gen 3 Surface MountModel: APXG3DMV2The Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen3 Antenna specifically engineered for the demanding marine environment. Its suitability for marine conditions makes it perfect for any other outdoor use, such as on RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The two end caps are crafted from machined marine-grade high-density polyethylene, offering exceptional finish and corrosion resistance. These end caps are secured to black hard-anodized aluminum strips, providing superior strength to firmly hold the Gen 3 antenna on any flat surface.The Starlink Standard Gen3 antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview APXG3DMV2 mount is a superior choice, offering a reliable and easily assembled mounting solution.The APXG3DMV2 also includes one of Seaview's CG2090W horizontal cable seals for waterproof cable entry. This seal can be placed either beneath the antenna or externally, depending on your needs.

Read more less

Seaview APXG3DMRBV2 Removable Base Kit for the surface mount APXG3DMV2 (sold separately)Model: APXG3DMRBV2The optional removable base kit (APXG3DMRBV2) can be used to easily remove the Starlink Standard Gen3 antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXG3DMV2 can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Standard Gen3 in more than one location.Choose the Seaview APEX APXG3DMV2 and APXG3DMRBV2 for a durable, reliable, and easy-to-remove mount that ensures your Starlink Standard Gen3 Antenna performs flawlessly in any condition.

Read more less

Seaview SM24G3 Mast Mount for Starlink G3Model: SM24G3This Seaview Mast Mount for the Starlink Standard Gen3 antenna has been specifically designed for the marine environment (chem treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.Fits a mast or tube diameter great than or equal to 3.63" (92mm).The solid under body construction not only greatly improves strength but also hides cables.Pre-drilled under body allows for flood lights or horns to be mounted if desired.

Read more less

Seaview SP2MODV2 Spreader Kit for M2 MountsModel: SP2MODV2This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS).

Read more less

Seaview SP1MODV2 Spreader Kit for M1 MountsModel: SP1MODV2This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS).

Read more less

Seaview APXMDMRB Removable Base Kit for the Surface Mount APXMDM9Sold Separately)Model: APXMDMRBThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXMDM can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Mini in more than one location.Choose the Seaview APEX APXMDM and APXMDMRB for a durable, reliable, and easy-to-remove mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.,Seaview APXMDMRB Removable Base Kit for the Surface Mount APXMDM9Sold Separately)Model: APXMDMRBThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXMDM can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Mini in more than one location.Choose the Seaview APEX APXMDM and APXMDMRB for a durable, reliable, and easy-to-remove mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

Seaview ADAMINI Modular Top Plate Only for MINI Starlink Antenna Requires MountModel: ADAMINIThe pedestal and light bar are sold separately. This is for the modular top plate only.The Seaview modular top plate ADAMINI for the MINI Starlink Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a water proof grommet in the center for cable routing.The MINI Starlink Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAMINI modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

Seaview SVWSM18SLM Mast Mount for Starlink MiniModel: SM18SLMThis SM18SLM Seaview Mast Mount for the Starlink Mini antenna has been specifically designed for the marine environment (chem treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.Fits a mast or tube diameter great than or equal to 2 5/8 in. (66.68mm)The solid under body construction not only greatly improves strength but also hides cables.Pre-drilled under body allows for flood lights or horns to be mounted if desired.

Read more less

Seaview SVWAPXMDM Surface Mount for Starlink MiniModel: APXMDMThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine use, its robust design makes it ideal for a variety of outdoor applications, including RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The mount's design includes a slight angle to the Starlink antenna, promoting moisture runoff and ensuring optimal performance.The APXMDM features end caps made from machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. These end caps are securely attached to black hard-anodized aluminum strips, providing the strength needed to firmly mount the Starlink Mini antenna on any flat surface, whether stationary or in motion.While the Starlink Mini Antenna comes with a pressure-fit kickstand suitable for flat, non-mobile surfaces, it requires additional support when mounted on a vehicle or other fast-moving vessel. The Seaview APXMDM mount offers a reliable and easily assembled solution, ensuring your antenna stays securely in place.What's in the Box: Surface Mount for Starlink Mini CG2090W horizontal cable seal

Read more less

Seaview PMU2ALED12 Lightbar top with LED Light on 12" Post with 2 1in 14 Thread basesModel: PMU2ALED12

Read more less

Seaview Removable Base For Use With Mounts With 7in x 7in BaseModel: PMRB7These new-innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of loosing a knob.

Read more less

Seaview Removable Base For Use With Mounts With 10in x 10in BaseModel: PMRB10These new-innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of loosing a knob.

Read more less

Seaview ADAG3 Modular Top Plate for Starlink G3Model: ADAG3The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4 / Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a water proof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

Seaview SVSLWBLED Angled Wedge base and LED Light for Starlink - WhiteModel: SVSLWBLED Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8° wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7' of wire (12v) and USCG approved for boats up to 20 meters (65.6') in length.The aluminum light bar and 8° wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).What's in the Box: Wedge Mount - White Lichtbar - White LED 3nm Combo Mast head light CG30PW (White) cable seal

Read more less

Seaview SVSLWBBKLED Angled Wedge base and LED Light for Starlink - BlackModel: SVSLWBBKLED Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8° wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7' of wire (12v) and USCG approved for boats up to 20 meters (65.6') in length.The aluminum light bar and 8° wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).What's in the Box: Wedge Mount - Black Lichtbar - Black LED 3nm Combo Mast head light CG30PB (black) cable seal

Read more less

Seaview SRM200W for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) with 8deg Angled BaseModel: SRM200WB8 Designed to fit the Starlink Flat High Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) that has been specifically designed for the harsh marine environment. If its good for the marine environment then its ideal for any other outdoor application (RVs, overland vehicle, vans, jeeps, side by side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, for marine or vehicle mounting, it necessitates additional support. Opting for the Seaview SRM200W mount is a superior choice, offering a reliable and adaptable mounting solution.What's in the Box: SRM200W Mount CG30PW (white) cable seal 8° wedge base

Read more less

Seaview LTBU1ALED12 Universal Top mount with 12" Light Bar and LTBLED12 LightModel: LTBU1ALED12What's in the Box: LTBU1A Universale Top Mount SVLTP12 12in Light Post LTBLED12 Round Seaview 3NM LED combination mast head allround ligh

Read more less

Seaview ADASTLKABK Black Starlink Top Plate for Seaview Modular Mounts, No Light Bar OptionModel: ADASTLKABK 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼" aluminum plate Top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4" tall The 1/4" aluminum plate is powder coated white and can accommodate a Seaview light bar No Light Bar Option **Not intended for use underway*** Requires M1 or M2 style modular mount

Read more less

Seaview ADA-BLANK Modular Plate To Fit Searchlights on Seaview Mounts ending in M2Model: ADABLANKBLKA universal Top Plate for search lights. Made from Kingstarboard, this plate allows you to drill your own holes insuring a precise fit with your search light. Note: This Top Plate will only fit Seaview Modular Mounts ending in "M2". For example PMA-DM1-M2.

Read more less

Seaview SVLTP36LED 36" Light Post with LTBLED12 Navigation LightModel: SVLTP36LEDSeaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25" in diameter with a 2.75" round base plate.Includes LTBLED12 round Seaview 3NM LED combination mast head allround light.What's in the Box: SVLTP36 36" Light Post LTBLED12 Navigation Light

Read more less