Taper-Lock™ Hi-Lo Bushing for 2-3/8" PostHigh-Strength Composite Bushing Inserts Into End Of Post For Hi-Lo Seat Swivel Mount.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

5-Legged Deck Base Floor Pod Replacement - 1/2"Floor pod replacements for a 5-legged deck base.

Read more less

Thread-Lock™ Aluminum Surface Mount Base - 10"High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock™ fixed-height post (sold separately). Can be used with Thread-Lock™ table and grill posts (sold separately).

Read more less

2-3/8" Thread-Lock™ Fixed-Height Post - 13"Sturdy 2-3/8″ high-strength aluminum post for use while underway. Locking collar prevents unintentional removal from base. Use with Trac-Lock™ non-locking seat mount (sold separately).

Read more less

KingPin™ Standard Square Steel Base with Satin E-Coat - 7"x7"Standard square mild steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

Read more less

KingPin™ Standard Square Steel Base with Brass - 7"x7"Standard square stainless steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

Read more less

Workhorse Air-Ride Slide & Swivel - 4"10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large, easy-to-reach control knobs. Swivels on post. Slide travels 6″ fore and aft. Flip handle for locking pin.

Read more less

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield® marine swivel. Adds structural support to rotational molded seats and other plastic seat bottoms.

Read more less

2" Taper-Lock™ Hi-Lo BushingReplacement bushing for the top of 2″ Hi-Lo posts. For use on models 2020 and earlier.

Read more less

2-3/8" Trac-Lock™ III Swivel BushingReplacement bushing for 2-3/8″ Trac-Lock™ III slides and swivels. Use on Trac-Lock™ III 2002 and newer.

Read more less

Taper-Lock™ Seat Swivel BushingReplacement bushing for Taper-Lock™ Hi-Lo swivel. Washer included.

Read more less

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base.

Read more less

KingPin™ Unintentional Detach Retention Cup - PlasticReplacement standard post pin for use in KingPin™ standard base.

Read more less

KingPin™ Base Socket CoverPlastic KingPin™ cover keeps sockets clear when not in use. Use on KingPin™ 3/4″ pin base. (sold as each).

Read more less

Stowable Base Socket CoverPlastic stowable cover keeps sockets clear when not in use. Used for any 2-3/8″ tapered post table base. (sold as each).

Read more less

Thread-Lock™ Base Socket CoverPlastic Thread-Lock™ cover keeps sockets clear when not in use. Use on seat bases and table bases. (sold as each).

Read more less

SpringLock™/Clip-Lock™ Base Socket Cover3/4″ Deck Base Socket Cover fills the opening when not in use, creating a flush surface. (sold as pairs).

Read more less

Brass KingPin™ BushingBrass replacement bushing for KingPin™ base.

Read more less

Plastic Swivel for Motor SupportReplacement swivels for economy Guardian motor support heads.

Read more less

Support Bushing KitReplacement bushing kit and V-bumper for pivot brackets on Guardian Deluxe and Standard heads to reduce abrasion on the lower unit.

Read more less

Bolt-On Clevis PinReplacement tension clip between the extrusion and bolt-on T-brace.

Read more less

T-Brace for Bolt-OnTrailer bolt-on T-Brace replacement for Guardian Motor Support.

Read more less

Spring-Lock™ Base Repair Kit - 2 BushingsThe repair kit for Spring-Lock™ bases includes one thin bushing and one thick bushing. For models 2010 and earlier. Base repair kits include: 1/2 oz bottle of glue with brush cap, plastic bushing, and wooden dowel mandrel.

Read more less

KingPin™ Taper-Lock™ AdapterInserts into Taper-Lock™ base to accept KingPin™ posts or mounts.

Read more less

Spring-Lock™ Power Pedestal Repair KitRepair kit for Spring-Lock™ Power-Rise pedestals.

Read more less

Spring-Lock™ Replacement Post BushingReplacement bushing for the top of the non-locking Spring-Lock™ post.

Read more less

Spring-Lock™ Replacement End CapReplacement Spring-Lock™ end cap for securing the locking latch in the post.

Read more less

Stern Handle with Pre-Drilled HolesHigh-strength cast aluminum rugged construction with 6-5/8″ distance between mounting holes. Extra smooth 6″ grip. Sold in pairs.

Read more less

Quick-Change Trailer Jack for Wheel Size 10"-15"High-strength aluminum construction fits round or square axles and makes elevating your trailer quick, easy, and safe. Lifts up to 2 tons.

Read more less

Guardian Motor Support, Standard Combo, Over the Roller & Bolt-OnCast aluminum head with high-strength aluminum shaft. Supports the cantilevered weight of the motor while stabilizing the engine and steering mechanisms when trailering. Varying adjustability. Includes 15″ black EPDM rubber holding strap.

Read more less

Guardian Motor Support Combo - DeluxeCast aluminum head with high-strength aluminum shaft. Supports the cantilevered weight of the motor while stabilizing the engine and steering mechanisms when trailering. Varying adjustability. Includes 15″ black EPDM rubber holding strap. Guardian motor supports are available in bolt-on or over-the-roller strap-on.

Read more less

Party Platter Thread-Lock™ Surface Mount Table Package - WhitePackage includes party platter table top, 2-piece anodized aluminum locking Thread-Lock™ table post, and Thread-Lock™ black plastic base.

Read more less

Table Top Party Platter - WhiteLightweight molded heavy-duty marine-grade plastic table top. No umbrella socket.

Read more less

2-3/8" Bolt-Lock Table Pedestal Package - 27"Package includes 2-3/8″ High-strength anodized aluminum post (#3662027), high-strength black plastic table mount (#3660704-L), and 7″ aluminum satin finish surface mount floor base with 5-3/4″ mounting hole pattern (#3690007).

Read more less

3-Stage Table Pedestal PackagePackage includes gas-powered adjustable high-strength aluminum table post with 12-1/2″ table mount and 12″ diameter floor base with 11″ bolt pattern for added stability-designed to provide maximum strength and support to your dining experience.

Read more less

Non-Locking Spring-Lock™ Seat MountE-coat rust-resistant finished stamped steel. Adds 1-1/2″ to the height of the post. Use with any Spring-Lock™ or Clip-Lock non-locking post (sold separately).

Read more less

5-Legged Deck Base with Plate33″ Diameter 5-legged deck base with pre-drilled 5/16″-18 tap mounting plate to accept any Springfield® Marine 12″ or 9″ round pedestal base. Approximately 4″ high with floor pods or 6″ high with casters. Pods and casters sold separately.

Read more less

4" Offshore Fixed-Height Helm Pedestal PackagePackage includes heavy-duty 4″ Workhorse slide & swivel with anodized finish, fixed-height brite dip 4″ pedestal with 12″ round polished base. The Helmsman flip-up footrest flips up out of the way. Pedestal height 24″. Overall height 27-1/2″.

Read more less

4" In-Shore RS2 Pedestal PackagePackage includes locking Workhorse swivel mount with anodized finish, high-strength polished aluminum fixed-height 4″ pedestal with 12″ round base, 316 electro-polished stainless steel 28″ round footrest, and black powder-coated 5-legged deck base. Overall height 25-1/2″.

Read more less

4" Elite Fixed-Height Pedestal - 30"4″ Pedestal of .213″ thick aluminum with 12″ round base, polished finish. The pedestal is sized and pressed into base then rim welded for stability. Use with any 4″ Mariner II or Workhorse slide or swivel (sold separately).

Read more less

2-3/8" Clipper Adjustable PackagePackage includes 2-3/8″ adjustable pedestal with 10″ round base and non-locking Trac-Lock™ swivel. Pedestal adjusts in 1-inch increments.

Read more less

2-3/8" Explorer Fixed-Height Locking Pedestal - 10"Anodized aluminum 2-3/8″ pedestal with 9″ round satin anodized base. Use with Trac-Lock™ slide or swivel (sold separately).

Read more less

2-3/8" Plug-In™ Locking 3-Piece Pedestal Package - 12"Locking 3-piece package includes locking Trac-Lock™ swivel seat mount, Plug-In™ Hi-Lo fixed height post with anodized finish, and Plug-In™ 9″ diameter base with satin finish.

Read more less

In-Shore LE1 Adjustable Mainstay PackageHeavy-duty adjustable mainstay package includes locking Trac-Lock™ air-ride slide & swivel, 316 electro-polished stainless steel half-round footrest, and black powder-coated 5-legged deck base. Pedestal adjusts 13-1/2″ to 19″. Overall height 20″ to 27″.

Read more less

2-3/8" Explorer Fixed-Height Locking Pedestal - 9"Anodized aluminum 2-3/8″ pedestal with 9″ round satin anodized base. Use with Trac-Lock™ slide or swivel (sold separately).

Read more less

2-3/8" Adjustable Mainstay Package with Locking Swivel & SlidePackage includes 2-3/8″ high-strength anodized aluminum air-powered height adjustment pedestal (500 newton cylinder) with 9″ round anodized base, and locking Trac-Lock™ swivel and slide.Specifications: Adjusts: 14.5" to 20.5" Seat Mount: 3100531-LAR1

Read more less

2-3/8" Adjustable Mainstay Package with Locking SwivelPackage includes 2-3/8″ high-strength anodized aluminum air-powered height adjustment pedestal (500 newton cylinder) with 9″ round anodized base, and locking Trac-Lock™ swivel.Specifications: Adjusts: 14" to 20" Seat Mount: 3100031-LAR1

Read more less

2nd Generation 2-7/8" Fixed-Height Pedestal - 12"Permanent mold base is made from high magnesium aluminum for corrosion resistance, hydro-formed for optimal rotational torque, and welded for safety assurance. Use with 2-7/8″ Trac-Lock™ slide or swivel (sold separately).

Read more less