T-H FLEX™ 1/2" Expandable Braided Sleeving - 100' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features: Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application Specifications: Type: Misc Box Dimensions: 6"H x 9"W x 10"L WT: 1.5 lbs UPC: 733572036657

Read more less

10" Atlas Series Hot Shot™ Jack Plate Hole Shot PlateREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

8" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Single Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

HYDRA™ Automatic Bilge Pump - 800 GPH - 12VThe T-H Marine HYDRA™ Automatic Bilge Pump is engineered for reliable, high-performance water removal with long-term durability built in. Backed by 4,000 hours of testing, HYDRA delivers dependable operation through its advanced anti-airlock design, ensuring reliable restarts even when air is present in the line. A precision-balanced motor with a 316 stainless steel motor shaft reduces vibration, noise, and corrosion for smooth, long-lasting performance in harsh marine environments.Designed for simplified service and OEM-friendly installation, HYDRA features a removable nozzle for quick maintenance without disconnecting hoses and a positive-lock strainer base that matches most standard mounting patterns. The integrated Sure-Start™ float switch and programmed start delay prevent false starts and extend pump life, while the external test knob allows fast manual operation checks. Available in 800 GPH and 1100 GPH models and meeting all major ABYC, ISO, and U.S. Coast Guard standards, HYDRA is built for confidence on every outing.Features: FLOW RATE: 800 GPH AMP DRAW: Approx. 4A FUSE SIZE: 5 AMP ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers. SURE-START FLOAT SWITCH: Corrosion-proof design for a reliable start every time. EXTERNAL TEST KNOB: Allows for quick manual testing. INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mr. Crappie Bait Blaster - Underwater Green LightFeatures: 18' Power Cable, weighted to maintain the desired depth range Green LED lights for maximum fish attraction 360-degree light output 180 LED design WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Universal Material: Polymer Watts: 6 Voltage - Input Range (Volts): 12 Color: Green Box Dimensions: 3"H x 7"W x 12"L WT: 1.2 lbs UPC: 733572093407

Read more less

8" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates.  Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force Conservation Cull System Gen 2Features: Simplified Cull Clip Stainless Steel Spring Loaded One Hand Operation Removable Floats Color Coded Line Non-penetrating Clip Balance beam included 6 color-coded buoys Allows quicker culling- More fishing time! Uses a stronger plastic clip to hold tight around the lip Buoy holder for quick and easy storage of each Cull Ball WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

90-Degree Cockpit Scupper Drain - WhiteThis cockpit scupper drain is an affordable and durable solution for draining areas below the waterline. Made from high-strength, UV-stabilized polymer, it features a check ball for effective sealing against reverse water flow and an optional leaf guard to prevent clogging.This cockpit scupper drain provides an inexpensive alternative to items currently available for draining areas where the discharge is below the waterline. This injection-molded part is high-strength and UV-stabilized to provide value and durability. The check ball contained inside the cockpit scupper drain is molded and then ground smooth and round to provide better sealing against reverse water flow that occurs when backing the boat. The leaf guard model has raised ribs on the head to prevent debris (leaves, scales, etc.) from clogging holes.The overall diameter of the mounting flange is 3 9/16". The cockpit scupper drain requires a 2 1/2" diameter hole for installation and mounts with four (4) number 8 screws (not furnished). The top of the cockpit scupper drain is removable for cleaning. All outlets fit 1 1/2 inch drain hoses.Features: Check the ball inside to prevent water from backing up Made of high-strength, UV-stabilized polymer Removable top screen for easy cleaning An optional leaf guard prevents debris from clogging Fits standard 1-1/2" drain hoses Specifications: 90-Degree Outlet 1-1/2" Hose Diameter Color: White Specifications: Hose Size: 1-1/2" Material: Polymer Type: Fittings & Hoses Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs UPC: 733572034158

Read more less

HYDRA™ Livewell Pump - 1100 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 1100 GPH AMP DRAW: Approx. 5A FUSE SIZE: 6 AMP INSTALL HOLE: 1-1/16" ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks.

Read more less

HYDRA™ Livewell Pump - 1100 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16" FLOW RATE: 1100 GPH AMP DRAW: Approx. 5A FUSE SIZE: 6 AMP INSTALL HOLE: 1-1/16" ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks.

Read more less

6" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates.  Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

6" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

Heat Shrink Connector Kit *200-PieceFeatures: Heat-Activated Adhesive Sealant Use Heat Gun or Torch to Create a Corrosion-Proof Water-Tight Seal Heat-Shrink Tubing has a 3:1 Shrink Ratio What's Included? (27) Pink - Butt Connectors For 22-18 Gauge (AWG) wire (10) Pink - #10 Ring Connectors For 22-18 Gauge (AWG) wire (10) Pink - 1/4" Ring Connectors For 22-18 Gauge (AWG) wire (10) Pink - 5/16" Ring Connectors For 22-18 Gauge (AWG) wire (10) Pink - 3/8" Ring Connectors For 22-18 Gauge (AWG) wire (22) Blue - Butt Connectors For 16-14 Gauge (AWG) wire (10) Blue - #10 Ring Connectors For 16-14 Gauge (AWG) wire (10) Blue - 1/4” Ring Connectors For 16-14 Gauge (AWG) wire (10) Blue - 5/16” Ring Connectors For 16-14 Gauge (AWG) wire (10) Blue - 3/8” Ring Connectors For 16-14 Gauge (AWG) wire (15) Blue - Female Spade Connectors For 16-14 Gauge (AWG) wire (14) Yellow - Butt Connectors For 12-10 Gauge (AWG) wire (6) Yellow - #10 Ring Connectors For 12-10 Gauge (AWG) wire (6) Yellow - 1/4” Ring Connectors Fits 12-10 Gauge (AWG) wire (6) Yellow - 5/16” Ring Connectors For 12-10 Gauge (AWG) wire (6) Yellow - 3/8” Ring Connectors For 12-10 Gauge (AWG) wire (6) Red & (6) Black - 3" x 3/16" Heat-Shrink Tubing (3) Red & (3) Black - 3" x 3/8" Heat-Shrink Tubing

Read more less

G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

G-Force ELIMINATOR Black Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

48" Zippered Rigging Sleeve - BlackProtect your cables and hoses with this easy to remove rigging sleeve. Made of rugged Sunbrella® fabric, this sleeve will withstand the elements and resist fading. Easily zips on and off to access cables of hoses when needed. Ends are secured with cable ties sewn into pockets.Features: Zips On and Off to Protect Cables and Hoses Rugged Sunbrella® – Weather & UV Resistant Ends are Secured with Cable Ties WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 4"H x 6"W x 9"L WT: 0.4 lbs UPC: 733572041606

Read more less

Z-LAUNCH™ 20' Watercraft Launch Cord for Boats 23'-35'Makes launching boat by yourself as easy as 1-2-3!Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.Features: Simple and safe operation No-hassle design Attaches easily Expands to more than 20' Unlike rope, will not jerk your watercraft or you Stay safe and dry launching your boat alone Great for ramps with "no power" laws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 20' Diameter (Inches): 0.625 Box Dimensions: 3"H x 9"W x 12"L WT: 2.05 lbs UPC: 733572090154

Read more less

HYDRA™ Cartridge Bilge Pump - 1100 GPH - 12VThe HYDRA™ Cartridge Bilge Pump is engineered for dependable marine water removal with a service-friendly cartridge design that allows rapid motor replacement without removing the pump housing. Backed by 4,000 hours of testing, HYDRA delivers consistent performance through an advanced anti-airlock design that ensures reliable restarts—even when air is present in the line.Built for long-term durability in harsh marine environments, the HYDRA Cartridge Bilge Pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge system allows quick, tool-free motor removal for fast servicing on the water or at the dock.Designed with OEM-friendly installation in mind, the positive-lock strainer base matches most standard mounting patterns, and the pump includes straight and 90° outlets, a backflow restrictor, and a flat seal for flexible plumbing configurations. Available in 600 GPH, 800 GPH, and 1100 GPH options and meeting ABYC, ISO, and U.S. Coast Guard standards, the HYDRA Cartridge Bilge Pump delivers reliable performance boaters can trust.Features: AMP DRAW: Approx. 5A FUSE SIZE: 7.5 AMPFLOW RATE: 1100 GPH ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers. DUAL LOCK CARTRIDGE: Designed for quick removal and fast service. INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal.

Read more less

BANSHEE™ Alarm PadlockProtect Your Boats, Trailers and PropertyThe BANSHEE™ is an alarm-equipped padlock for protecting any valuable item, boat or trailer from theft. When tampered with the alarm "scream like a Banshee" warding off potential thieves.Vibration-activated 110 Decibel Alarm Screams Like A Banshee When Activated Can Be De-Activated For Trailering Fits Most Trailer Couplers Weatherproof.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Box Dimensions: 1"H x 5"W x 7"L WT: 0.85 lbs UPC: 733572082753

Read more less

Transom Trim Control Push Button Trim SwitchTransom Trim Control Switch/Hydraulic Jack Plate SwitchPut a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

HYDRA™ Livewell Pump - 800 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 800 GPH AMP DRAW: Approx. 4A FUSE SIZE: 5 AMP INSTALL HOLE: 1-1/16"

Read more less

HYDRA™ Livewell Pump - 800 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16" FLOW RATE: 800 GPH AMP DRAW: Approx. 4A FUSE SIZE: 5 AMP INSTALL HOLE: 1-1/16"

Read more less

T-H FLEX™ 1/4" Expandable Braided Sleeving - 100' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features: Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application Specifications: Type: Misc Box Dimensions: 6"H x 9"W x 10"L WT: 0.85 lbs UPC: 733572036602

Read more less

HYDRA™ Cartridge Bilge Pump - 800 GPH - 12VThe HYDRA™ Cartridge Bilge Pump is engineered for dependable marine water removal with a service-friendly cartridge design that allows rapid motor replacement without removing the pump housing. Backed by 4,000 hours of testing, HYDRA delivers consistent performance through an advanced anti-airlock design that ensures reliable restarts—even when air is present in the line.Built for long-term durability in harsh marine environments, the HYDRA Cartridge Bilge Pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge system allows quick, tool-free motor removal for fast servicing on the water or at the dock.Designed with OEM-friendly installation in mind, the positive-lock strainer base matches most standard mounting patterns, and the pump includes straight and 90° outlets, a backflow restrictor, and a flat seal for flexible plumbing configurations. Available in 600 GPH, 800 GPH, and 1100 GPH options and meeting ABYC, ISO, and U.S. Coast Guard standards, the HYDRA Cartridge Bilge Pump delivers reliable performance boaters can trust.Features: AMP DRAW: Approx. 4A FUSE SIZE: 5 AMPFLOW RATE: 800 GPH ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers. DUAL LOCK CARTRIDGE: Designed for quick removal and fast service. INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal

Read more less

Z-LAUNCH™ 10' Watercraft Launch Cord for Boats up to 16'Makes launching boat by yourself as easy as 1-2-3!Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.Features: Simple and safe operation No-hassle design Attaches easily Expands to more than 20' Unlike rope, will not jerk your watercraft or you Stay safe and dry launching your boat alone Great for ramps with "no power" laws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 10' Diameter (Inches): 0.625 Box Dimensions: 2"H x 8"W x 10"L WT: 1.35 lbs UPC: 853333003794

Read more less

Additional Remote Control Unit f/2-Way Boat Alarm SystemProtects your boat and valuable equipment from theft.Features:Two Way Remote Alerts with Sound, Light & VibrationWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Sensor Quantity - Max: 1 Sensors Included: 1 Box Dimensions: 1"H x 1"W x 3"L WT: 0.05 lbs UPC: 733572073508

Read more less

Motor Stik OutBoard Motor Support Stick - PairFeatures: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs UPC: 733572067750

Read more less

HYDRA™ Livewell Pump - 600 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 600 GPH AMP DRAW: Approx. 3A FUSE SIZE: 4 AMP INSTALL HOLE: 1-1/16"

Read more less

PWC Anchor Kit - 3lb3 lb Grappling Folding AnchorFeatures: Includes storage bag For small boats, sailboats, personal watercraft, inflatables, and canoes For sand, rock, mud, and gravel bottoms Easy to deploy or stow away

Read more less

HYDRA™ Livewell Pump - 600 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 600 GPH AMP DRAW: Approx. 3A FUSE SIZE: 4 AMP INSTALL HOLE: 1-1/16"

Read more less

Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: A barbed hose fitting connects 3/4 in. inside-diameter tubing Standard hose threads with a protective cap that has a retaining strap are standard Chrome-plated ABS flange Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4 in. marine hose Protective cap with retainer The flange dimension is 2-1/4 in. OD Installation in a 1-1/4" hole Straight fitting with shutoff valve

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Washdown Fitting with Shutoff ValveThis bulkhead-mounted washdown fitting is inexpensive, functional, easy to install, and rust-proof. This injection-molded plastic fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: Black flange color Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4" marine hose Protective cap with retainer The flange dimension is 2-1/4" OD Installation in a 1-1/4" hole Straight inlet configuration Shutoff valve Specifications: Construction: Plastic Box Dimensions: 4"H x 6"W x 8"L WT: 0.2 lbs UPC: 733572012200

Read more less

Bolt Kit for Jack PlatesFeatures: For Mounting Outboard to Plate Kit Contains: 4 each 1/2” x 3” stainless steel long bolts, 4 each 1/2” lock nuts – brass with nylon insert, 8 each 1/2” flat washers - stainless steel

Read more less

HydroWave Mini 12V Adapter Conversion KitAllows your HydroWave Mini to perform for a longer period of time on a larger power supply than the standard 9 volt power supply. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 5"W x 11"L WT: 0.4 lbs UPC: 853333003749

Read more less

Transom Support Plate Upper MountTransom Support Plate distributes stress of engine bolts. Cast in high quality aluminum. All plates are 3/8" thick. Fit top bolt pattern of outboard. Generic plate with no lettering is standard, but custom logos and black painting can be produced with minimum quantities. Features: Distributes stress of engine bolts High quality cast aluminum All plates - 3/8" thick Simple to install

Read more less

ATLAS™ Jack Plate Replacement Rocker SwitchGenuine Replacement Parts for Atlas Hydraulic Jack Plate. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the  port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010626

Read more less

Quick Flush Kit for OMC OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010602

Read more less

Transom Support Plate Lower MountFeatures: 10" Bolt Hole Pattern Top Bolt Holes-Standard 3/8" Thickness. High quality Cast Aluminum Distributes the stress of the motor mounting bolts

Read more less

Prop Master Propeller WrenchThe Prop Master™ is the original molded propeller wrench.This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master™ is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master™ will tighten all 1 1/16" propeller nuts without slipping or stripping. (OMC, Johnson and Evinrude, - over 40 HP, Mercury - over 50 HP) High visibility color makes it easy to locate in dark boat compartments. The Prop Master™ also has a 9/16" garboard drain plug socket on the reverse side. Will not corrode in the salt water environment.Features: Fits All 1-1/16” Prop Nuts (40hp & up) Rugged Nylon Resists Stripping 9/16” Garboard Drain Socket on Back Non-Corrosive in Salt Environment High Visibility Yellow makes wrench easy to find WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: N/A Material: Polymer Diameter (Inches): 0.6875 Box Dimensions: 2"H x 6"W x 16"L WT: 0.6 lbs UPC: 733572020007

Read more less

Kayak Anchor Kit - 1.5lb1.5 lb Grappling folding anchorFeatures: Includes 30' of 3/16" nylon anchor line Includes  1/4" Anchor Shackle Exceptional 4-fluke holding power Easy to deploy or stow away

Read more less

Toggle Anchor KitGame-changing hardware for mounting trolling motors and table and seat pedestals, especially on decks and bulkheads where access is limited. Secures any accessory that will receive a high amount of torque at the fastening location.  Features: Stainless steel toggle 2” long x 0.45” wide Accepts ¼”-20 fasteners Requires a ½” mounting hole Great for tables, seat bases, and trolling motors

Read more less

Foam Rod HoldersVersatile 6 Rod Storage Rack. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely.Features: Stores 6 rods neatly and securely Mount horizontally or vertically Foam grip pads Great for boats, RVs or garages Economical for boat rod lockers  Corrosion proof Durable and lightweight WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less