UP28F - Front Mount Helm PumpFeatures: Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron rotor for greater durability and longer life 1/4" NPT fitting for 3/8" tube Complete with elbow fittings 5 pistons

Read more less

Mechanical Hatchlifter 12" STK FastThe AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By activating a switch, it is possible to lift the hatch to any desired position from closed to full open; an internal self-locking mechanism will maintain the position preventing any accidental hatch closing. In case of a power failure, an emergency device allows for manual opening.The Uflex AV hatch lifters do not require any maintenance, are easy to install, and are made of materials resistant.Features: According to the load required, the AV hatch lifter can be mounted individually, or in twin-cylinder installations for heavier loads. It is also possible to install more than two AV actuators in multiple applications.  Maximum load for single installations: 1200N (120 kg - 265 lbs)  Maximum load for dual installations: 2400N (240 kg - 529 lbs)  Maximum load is recommended not to be exceeded.  Supplied with all mounting hardware.  Stainless steel telescopic ram for manual operation in case of emergency.  Available on request without a manual emergency opening device for high-performance boats.  Circuit breaker to stop accidental overloading of the system and electronic stop at the closed or fully open position.  IP 65 protection rated  Speed: 25mm/sec no load applied, 17 mm/sec maximum load  Current absorption in single installations: 10A at 12V, 5A at 24V  Current absorption in dual installations: 20A at 12V, 10A at 24V  AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved. Specifications: Volt: 12V DC Stroke: 300mm (12") Length A (full closed actuator): 677 mm (26.6") Ø External: 48 mm (1.9")

Read more less

UC168-1 Hydraulic Steering CylinderInboard boat hydraulic steering cylinder. Balanced cylinder, an equal number of turns lock-to-lock.

Read more less

Control Unit - 42017 FControl Unit: user interface for the configuration, settings and diagnostic of all the modules in a system.IP protection: IP65Dim.: 215mm x 120mm (8.5" x 4.7") Quick Guide (pdf)Brochure (pdf)

Read more less

Single Lever Top Mount Control w/Neutral Lock & Trim Switch - BlackIn the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Read more less

UC95OBF-1 Hydraulic Cylinder 175HP or LessIntended for single engine applications of 175 HP and under, the UC95 OBF-1 cylinder is compatible with competing helms, hoses, and oil, and is built to last with heavy-duty stainless steel cylinder rods, seals, and link assemblies.Features: Balanced the number of turns lock-to-lock is the equal port to starboard or vice-versa Adjustable boss style fittings for easy installation High resistance stainless steel connection bolt (ULTRABOLT)  Constructed of top-grade materials this cylinder is simple to install and fits almost every two and four-stroke outboard engine on the market our engine Split and pinned mounting rod for easy installation and bushings to prevent friction with engine Brochure (pdf)

Read more less

Shift Unit - 42023 AIt controls up to 2 shifts with solenoids. Required for use with direct connection to the electrical shift unit on the transmission.IP protection: IP65Dim.: 210mm x 120mm (8.3" x 4.7") Quick Guide (pdf)Brochure (pdf)

Read more less

Aluminum Inboard Cylinder - 1.25" Bore & 7" StrokeA hydraulic steering system consists of a steering pump, a cylinder tied to the rudder or the outboard or sterndrive engine, and the connecting hoses. Under normal operating conditions, a steering wheel turn will pump the oil, which flows in through the hoses to the cylinder, according to the turn direction.With the consequent cylinder movement, the oil will flow to the pump through the hoses and, at the same time, move the engine or the helm, which are connected to the cylinder. The pumps, equipped with a valve that prevents outgoing fluid from returning along the same hose, allow the operation of the steering systems with two or more steering stations. The cylinders are double-acting and may be balanced or unbalanced. This particular cylinder is a balanced cylinder with the same number of steering wheel turns to move the helm from the center to the end stroke in two opposite directions. A well-balanced steering system needs the correct choice of pump for the cylinder.This hydraulic cylinder for the inboard engine UC 116-I has been designed and manufactured to be used as a component in the hydraulic steering systems. The cylinder with a mobile rod is installed directly to the arm of the helm through the proper ball joint on the end part of the cylinder. On the opposite side, it is fixed directly to the boat through a support with the plate.Features:Balanced (the number of turns lock-to-lock is equal to port to starboard or vice versa)Specifications: Volume: 116 cc - 7 cu.in Torque: 58 kg (5043 lbs.) Output Force: 464 kg (1023 lbs) Owner's Manual (pdf)

Read more less

V-Throttle - 42018 H - for 0-5V interfaces (voltage)Throttle with analog voltage interfaceRedundant voltage input, IVS, PWM output.They supply the throttle electronic signal. Required for use with direct connection to electronic throttle on the engine.IP protection: IP65Dim.: 205mm x 110mm (8" x 4.3") Quick Guide (pdf)Brochure (pdf)

Read more less

Single Lever Side Mount Control - Black/ChromeFeatures: Enables easy and safe shifting by preventing accidental gear engagement unless the engine is idling Can be installed horizontally or vertically, on the starboard or port side of the boat Provided with a brake tension release system adjustable from outside Pull-out handle disengages shift for warm-up Neutral safety switch X12 - 34543 Q (optional) prevents in-gear starting Exceeds EN ISO 11547 standards when X12 safety switch is installed

Read more less

Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - BlackIn the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Read more less

LTB1 Liquid Tie BarLiquid Tie Bar specifically for Up Series by Uflex.

Read more less

Double Paddle Trim SystemDouble paddle kit including two paddles and the brackets to attach it to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel. Available both in single and dual versions (for either two equal or two different outputs) Both single or dual paddle can be positioned at various angles for the most confortable choice Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version) Max load 5 Amp @ 12VDC For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay Uflex® trim tabs require the use of the KTR - 42860S kit relay Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”) Easy to install on the following Ultraflex® steering systems: - front and tilt mount hydraulic helms- tilt mount mechanical helmsWiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately

Read more less

Power Unit - 42026 GGrants the power supply up to 4 modules with the input combination of up to 2 batteries, 12 and 24V.Required for all Power A Mark II installations.IP protection: IP65Dim.: 205mm x 110mm (8" x 4.3") Quick Guide (pdf)Brochure (pdf)

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 30 FeetFittings: ORFS Specifications: Cable Length (Feet): 30' Box Dimensions: 4"H x 14"W x 14"L WT: 4.5 lbs UPC: 702755016007

Read more less

Zero Torque Rotary Steering HelmZero torque single cable steering helmT103ZT steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat

Read more less

Fourtech 6' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 6' Specifications: Cable Length (Feet): 6' Box Dimensions: 8"H x 19"W x 29"L WT: 11.2 lbs UPC: 702755053996

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 28 FeetFittings: ORFS Specifications: Cable Length (Feet): 28' Box Dimensions: 4"H x 14"W x 14"L WT: 4.3 lbs UPC: 702755015987

Read more less

T83FC Zero Torq Rotary Helm Single Cable Steering *Tilt Mechanism Sold SeparatelyT83FC has a tilt range of 48° and five locking positions, fast to get connected and easily installed with a planetary gear design and 3.8 approx steering wheel turns lock to lock.Features: X52 Tilt Mechanism sold separately Tilt range of 48° and five locking positions Fast connect, simple installation The tilt device eliminates under-dash movement Standard 3/4” tapered shaft – stainless steel All stainless steel cable output ends Corrosion resistant materials T83NRFC steering system is not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat X52 tilt mechanism fits Ultraflex tilt mount rotary and rack and pinion steering helms as well as Ultraflex tilt mount hydraulic pumps except SilverSteer™ and MasterDrive™ steering systems For boats faster than 50 mph, our hydraulic steering systems are recommended Optional steering wheel Engine connection kits Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards Specifications: M66 steering cable stroke: 228 mm (9") Lock-to-lock steering wheel turns: Approx. 3,8 Max. dash depth: 25,4 mm (1") Max. steering wheel diameter: 406 mm (16") Min. steering cable bend radius: 200 mm (7.9") *Tilt Mechanism Sold SeparatelyThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MasterDrive UCMD – User InterfaceFeatures: Safety switch ON/OFF (SMART BUTTON) Three different power levels with light indicator (PATENTED) Motor temperature visual indicator Twin-engine key selection included Lighted panel for stand-by position Plug-in wiring harness Suitable for a second station installation 7m (23') panel extension cable also available – 42636L This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Fourtech 8' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 8' Specifications: Cable Length (Feet): 8' Box Dimensions: 8"H x 19"W x 30"L WT: 11.8 lbs UPC: 702755054016

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 26 FeetFittings: ORFS Specifications: Cable Length (Feet): 26' Box Dimensions: 5"H x 15"W x 15"L WT: 4.5 lbs UPC: 702755015970

Read more less

Fourtech 9' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 9' Specifications: Cable Length (Feet): 9' Box Dimensions: 8"H x 19"W x 30"L WT: 12.2 lbs UPC: 702755054023

Read more less

SVS HP Hose Kit - 12'Two high-pressure Kevlar stranded flexible hoses with pre-crimped fittings and bend restrictors on both ends. Recommended for use with all Ultraflex SilverSteer™ and MasterDrive™ helms with 1500 psi relief valves.

Read more less

Fourtech 7' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 7' Specifications: Cable Length (Feet): 7' Box Dimensions: 18"H x 18"W x 30"L WT: 11.45 lbs UPC: 702755054009

Read more less

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome NutFeatures: Speed knob and nut included Polished stainless steel Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards Specifications: Diameter: (inch) 13.5" 12mm Wheel Nut - 1.75mm thread pitch 3 spokes

Read more less

T93 Zero Torque Rotary Steering HelmThis is a Uflex Zero torque Single cable steering helm (T93ZT).Features: Specifically designed for high-performance and high-efficiency applications Corrosion resistant materials Particularly suitable when clearance is limited Minimal feedback T93ZT steering system is not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph, our hydraulic steering systems are recommended Bezel not included - to be ordered separately T93ZT is also available in a package with FOURTECH-ZTF Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards Specifications: Standard 3/4” tapered shaft Lock-to-lock steering wheel turns approx 4,2 Max. steering wheel diameter 16-inches (406 mm)

Read more less

Nylon Tubing 3/8" OD - 50'Nylon tubing for Packaged Steering Systems up to 150hp

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 22 FeetFittings: ORFS Specifications: Cable Length (Feet): 22' Box Dimensions: 4"H x 14"W x 14"L WT: 3.85 lbs UPC: 702755015956

Read more less

Fourtech 20' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 20' Specifications: Cable Length (Feet): 20' Box Dimensions: 8"H x 19"W x 29"L WT: 16.5 lbs UPC: 702755054139

Read more less

Fourtech 18' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 18' Specifications: Cable Length (Feet): 18' Box Dimensions: 8"H x 18"W x 30"L WT: 15.5 lbs UPC: 702755054115

Read more less

Fourtech 17' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 17' Specifications: Cable Length (Feet): 17' Box Dimensions: 8"H x 18"W x 30"L WT: 15.25 lbs UPC: 702755054108

Read more less

Fourtech 16' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 16' Specifications: Cable Length (Feet): 16' Box Dimensions: 18"H x 18"W x 30"L WT: 14.95 lbs UPC: 702755054092

Read more less

Fourtech 15' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 15' Specifications: Cable Length (Feet): 15' Box Dimensions: 8"H x 18"W x 30"L WT: 14.6 lbs UPC: 702755054085

Read more less

Fourtech 14' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 14' Specifications: Cable Length (Feet): 14' Box Dimensions: 8"H x 18"W x 29"L WT: 14.3 lbs UPC: 702755054078

Read more less

Fourtech 13' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 13' Specifications: Cable Length (Feet): 13' Box Dimensions: 8"H x 19"W x 30"L WT: 13.6 lbs UPC: 702755054061

Read more less

Fourtech 12' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 12' Specifications: Cable Length (Feet): 12' Box Dimensions: 8"H x 19"W x 29"L WT: 13.5 lbs UPC: 702755054054

Read more less

Fourtech 11' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 11' Specifications: Cable Length (Feet): 11' Box Dimensions: 8"H x 18"W x 30"L WT: 13 lbs UPC: 702755054047

Read more less

Fourtech 10' Black Mach Rotary Steering System with Helm, Bezel & CableFourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation. Kit Includes: T91 Helm X34 - 90° bezel M90 Steering Cable - 10' Specifications: Cable Length (Feet): 10' Box Dimensions: 8"H x 18"W x 30"L WT: 12.7 lbs UPC: 702755054030

Read more less

Fourtech 13' Mach Rotary Steering System w/Helm, Bezel & CableFeaturing the T91 high performance helm with a Planetary Gear Design,the Fourtech offers performace, flexibility and durability increased bytop quality materials and construction. Centered on the main driveshaft, this helm requires less room behind the dash and is a direct "dropin" replacement for competing system; requiring no new holes forinstallation.The package includes: T91 helm (PLANETARY GEAR DESIGN) X34 90° Bezel Highly Flexible M90 Mach cable Specifications: Cable Length (Feet): 13' Box Dimensions: 8"H x 18"W x 30"L WT: 14 lbs UPC: 702755044215

Read more less

Morosini 13.8" Steering Wheel - Black Polyurethane with Stainless Steel Spokes & Chrome HubFeatures: Standard 3/4″ Taper Hub Included Meet with the EN 28848 and ABYC P22 Standards Ø 13.8” (350 mm) Grip: Polyurethane Spokes: 304 Stainless Steel Hub: Chrome Colors: Black Specifications: Dimensions: 13.8" Hub Included Steering Wheel Dish: 3.66"

Read more less

Tilt Rotary Steering HelmSingle cable steering helm - not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat

Read more less

Tilt Mechanism for L6 Power SteeringTilt mechanism with a range of 48° and five locking positions, suitable for Masterdrive TM steering systems.

Read more less

Hydraulic Hose Kit 6' - Two Hoses with Bulkhead FittingsTwo high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end. Application:Recommended for use with all Uflex helms with 1500 psi relief valvesSpecification:Hose Length (feet): 6’  Specifications: Cable Length (Feet): 6' Box Dimensions: 5"H x 14"W x 15"L WT: 2.55 lbs UPC: 702755025054

Read more less

ROTECH™ STEERING SYSTEMROTECH - X20T71FC - helm X34 - 90° bezel M66 - 20' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 20' Box Dimensions: 2"H x 5"W x 5"L WT: 32.4 lbs UPC: 702755019978

Read more less

ROTECH™ STEERING SYSTEMROTECH - X19T71FC - helm X34 - 90° bezel M66 - 19' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 19' Box Dimensions: 2"H x 5"W x 5"L WT: 31.85 lbs UPC: 702755019916

Read more less

ROTECH™ STEERING SYSTEMROTECH - X18T71FC - helm X34 - 90° bezel M66 - 18' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 18' Box Dimensions: 2"H x 5"W x 5"L WT: 31.4 lbs UPC: 702755019855

Read more less

ROTECH™ STEERING SYSTEMROTECH - X17T71FC - helm X34 - 90° bezel M66 - 17' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 17' Box Dimensions: 2"H x 5"W x 5"L WT: 31.02 lbs UPC: 702755019794

Read more less