Description
JL Audio MX Marine Amplifier 3-Channel Full-Range 600 Watts 12v
98409
Model: MX600/3
3-Channel Class D System Amplifier, 100 W x 2 + 400 W x 1 @ 2 ohms / 75 W x 2 + 250 W x 1 @ 4 ohms - 14.4V
Engineered specifically for powersports applications, the 3-channel MX600/3 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum housing is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a potent 75W x 2 into 4 ohms, plus a solid 400 watts for a subwoofer system, the MX600/3 makes a great all-in-one solution for driving a complete audio system from a single, ultra-compact chassis.
Onboard filters include a 12 dB / octave high-pass crossover on the main channels and a dedicated 24 dB / octave low-pass crossover for the subwoofer channel. Other features include a bass boost EQ, variable infrasonic filter and subwoofer output polarity switch. A dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
USA Limited Warranty: Two (2) years from the original date of purchase.
Specifications
| Rated Continuous (RMS) Power @ 14.4 V |
| Main Channels @ 4 ohms |
75 W RMS x 2 |
| Main Channels @ 2 ohms |
100 W RMS x 2 |
| Main Channels - Bridged @ 4 ohms |
200 W RMS x 1 |
| Subwoofer Channel @ 4 ohms |
250 W RMS x 1 |
| Subwoofer Channel @ 3 ohms |
300 W RMS x 1 |
| Subwoofer Channel @ 2 ohms |
400 W RMS x 1 |
| Subwoofer Channel @ 1.5 ohms |
N/A |
| Rated Continuous (RMS) Power @ 12.5 V |
| Main Channels @ 4 ohms |
50 W RMS x 2 |
| Main Channels @ 2 ohms |
80 W RMS x 2 |
| Main Channels - Bridged @ 4 ohms |
100 W RMS x 1 |
| Subwoofer Channel @ 4 ohms |
200 W RMS x 1 |
| Subwoofer Channel @ 3 ohms |
250 W RMS x 1 |
| Subwoofer Channel @ 2 ohms |
300 W RMS x 1 |
| Subwoofer Channel @ 1.5 ohms |
N/A |
| General Specifications |
| Frequency Response |
20 Hz - 20 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power |
>88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W |
>68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 ohms |
>92 / 50 Hz |
| Damping Factor @ 2 ohms |
>43 / 50 Hz |
| THD+N @ Rated Power (Main Channels) |
<1% @ 2 ohms per Ch. |
| THD+N @ Rated Power (Subwoofer Channels) |
<1% @ 2 ohms per Ch. |
| Input Voltage Range @ RCA Inputs |
Switchable from 250 mV - 4 V RMS (Low) to 580 mV - 14 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge |
4 AWG wire |
| Fuse Rating |
60 A (AFS, AGU or MaxiFuse™) |
| Signal Processing |
| Filter Slope(s) |
12 dB/octave |
| Filter Frequency Range: Channels 1 & 2 (front) |
35 Hz - 300 Hz |
| Filter Frequency Range: Subwoofer Channel |
40 Hz - 400 Hz |
| Filter Mode(s): Channels 1 & 2 (front) |
High-Pass only |
| Filter Mode(s): Subwoofer Channel |
Low-Pass only |
| Detented, Calibrated Filter Freq. Potentiometers |
Yes |
| Filter Defeat Function |
Yes |
| Remote Subwoofer Level Control |
Optional (RBC-1) |
| Remote Level Modes |
N/A |
| Channel Input Mode Switch |
Yes (2/4 ch.) |
| Pass-Through Preamp Output |
None |
| Source Channel Selection for PreOuts |
N/A |
| Physical Specifications |
| Height |
1.77 in / 45 mm |
| Width |
9.33 in / 237 mm |
| Depth |
4.50 in / 115 mm |
What's in the Box:
- (1) Amplifier
- (4) Stainless steel mounting screws
- (1) User manual
