Description
JL Audio MX Marine Amplifier Monoblock Wide-Range 300 Watts 12v
98406
Model: MX300/1
Monoblock Class D Wide-Range Amplifier, 300 W x 1 @ 2 ohms / 160 W x 1 @ 4 ohms - 14.4V
Engineered specifically for powersports applications, the MX300/1 monoblock amplifier employs our high-speed NexD™ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
With a robust 300W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system. The MX300/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch.
Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driver’s seat.
This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
USA Limited Warranty: Two (2) years from the original date of purchase.
Specifications
| Rated Continuous (RMS) Power @ 14.4 V |
| @ 4 ohms |
160 W RMS x 1 |
| @ 3 ohms |
220 W RMS x 1 |
| @ 2 ohms |
300 W RMS x 1 |
| @ 1.5 ohms |
N/A |
| Rated Continuous (RMS) Power @ 12.5 V |
| @ 4 ohms |
160 W RMS x 1 |
| @ 3 ohms |
200 W RMS x 1 |
| @ 2 ohms |
250 W RMS x 1 |
| @ 1.5 ohms |
N/A |
| General Specifications |
| Frequency Response |
20 Hz - 12 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power |
>85 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W |
>64 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 ohms |
>150 / 50 Hz |
| Damping Factor @ 2 ohms |
>75 / 50 Hz |
| THD+N @ Rated Power |
<1% @ 2 ohms |
| Input Voltage Range @ RCA Inputs |
Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge |
8 AWG wire |
| Fuse Rating |
30 A (AFS, AGU or MaxiFuse™) |
| Signal Processing |
| Filter Mode(s) |
Low-Pass only |
| Filter Slope(s) |
24 dB/octave |
| Filter Frequency Range |
40 Hz - 400 Hz |
| Detented, Calibrated Filter Freq. Potentiometer |
Yes |
| Filter Defeat Function |
Yes |
| Infrasonic Filter |
20 Hz - 40 Hz, variable |
| Bass Boost EQ |
0 to +12 dB @ 43 Hz |
| Output Polarity Switch |
Yes |
| Remote Subwoofer Level Control |
Optional (M-RBC-1) |
| Remote Bass EQ Boost Control |
No |
| Pass-Through Preamp Output |
None |
| Physical Specifications |
| Height |
1.77 in / 45 mm |
| Width |
8.66 in / 220 mm |
| Depth |
3.09 in / 78.5 mm |
| Net Weight |
3.18 lb / 1.44 kg |
What's in the Box:
- (1) Amplifier
- (4) Stainless steel mounting screws
- (1) Spare 30A fuse
- (1) User manual
