Search results for "radar mounts"

T005 Strap BracketFeatures: Light weight Easy to fit and remove Strong construction Bright painted finish

Read more less

Humminbird IDMK H5 Flush Mount HELIX 5 Series In Dash Mounting Kit Model: 740142-1 UPC: 082324045929

Read more less

Universal Masthead MountExtend your WindTrak 10.Sport or WindTrak 15 vane away from masthead obstructions and turbulence. The 13" (33 cm) arm comes with hardware allowing side or top mounting and offset angles up to ±20 degrees. May be attached securely to flat, curved, vertical, horizontal, or inclined surfaces. Gain space aloft and improve mounting position of wind finders and other equipment. Mount on the back of the mast for easier viewing from the cockpit. The mount adapts to virtually every masthead situation.Features: Length 13" (33 cm) Weight 3.2 oz (90 g) Boom can be shortened if necessary; complete instructions included Can be used with WindTrak Light #3200. Also accommodates Davis J-Base Mounts (using #10 stainless steel screws and nuts, not included) Specifications: Instrument Function: Wind Box Dimensions: 1"H x 3"W x 13"L WT: 0.3 lbs UPC: 011698170500

Read more less

Soft-Mate Radio HolderBeckson's Soft-Mate Radio Holder holds handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.The full size HH-8 is the ideal size for the large hand held radios (CB and 2 meter), GPS units, and scanners.Meaures 6" high, 3" wide, 2" deep. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 021083003351

Read more less

C120/E120 Classic to Axiom 12 Adapter Plate to Existing Fixing Holes Axiom 12 adapter plate for legacy C120 / E120 Classic MFDs Fixing holes: Existing Model: Axiom 12 (All variants) Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1 lbs UPC: 723193821619

Read more less

Works with: Lowrance Elite-7 & HDS-Gen2 Touch units. Simrad NSS units.

Read more less

Free Standing MountFLIR Free Standing Mount for FLIR's AX8™ and Raymarine Dragonfly 4/5/7.

Read more less

Gear Head Mount #428Quick and easy, drop and lock system that allows you to secrure and re-position your rod holder with just a twist.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 4"L WT: 0.21 lbs UPC: 801769004656

Read more less

Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3"W x 7"L WT: 0.2 lbs UPC: 753759148256

Read more less

Sidekick™ Mounting PlateThe Sidekick™ Mounting Plate is designed to work in conjunction with the exclusive Sidekick WiFi Sonar Transducer. The mounting plate can be mounted to the wall, floor, or countertop of your wheel house, making accessibility quick and easy. Built-in teeth help to manage your transducer cord when mounted vertically, and the cut-out allows your transducer cord to pass through the plate when mounted horizontally. Just snap the Sidekick module into the designated slot on the mounting plate, drop your transducer in the hole, and start fishing.Features: Mounting plate Exclusive Sidekick compatibility Cable management teeth Cable pass-through Durable and lightweight ABS material

Read more less

3' Stainless VHF Whip 3dB with Bracket for Sailboats - No CableThe KM-3A antenna is developed for sailing boats. It combines lightness and flexibility due to the quality stainless steel whip. Its elegant style fits perfectly with the boat design.The antenna is supplied together with a stainless steel mounting bracket, which makes the installation quick and stable.Features: Electropolished stainless steel whip Extra flexible SO 239 waterproof connector Mounting bracket supplied with the antenna Specifications: Frequency: 156-162 MHz Impedance: 50 ohms Electrical length: 1/2 λ V.S.W.R.: < 1,5:1 Polarization: Vertical Gain: 3 dB Max power input: 50 W DC ground: Yes Whip material: Stainless Steel Connector: SO 239 Mounting: Stainless steel bracket Length: 1,0 m (3.3′) Weight: 0,23 kilo

Read more less

5M Extension Cable for HALO Dome Radar5-meter cable for HALO Dome Radar. Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 6"L WT: 1.1 lbs UPC: 9420064114061

Read more less

icom M510BB Black Box VHF with HM195GW White CommandMicModel: M510 BB GW 21 USAIcom's M510BB is perfect for boats that need AIS receive functionality without taking up precious helm space. The supplied CommandMicTM provides all the safety and communication functions for commercial and leisure boaters.The M510BB consists of a CommandMicTM and black box RF unit. Use the CommandMicTM for all operations including DSC. Install the RF unit out of sight, place up to 60 ft (18.3 m)* away from the CommandMicTM.Add up to two additional CommandMicTM microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, fly bridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMicTM, or integrated into the NMEA 2000(R) bus to display radar and chart plotter information on an MFD (Multi-Function Display).In addition to the conveniently located DSC button on the back of every CommandMicTM, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.The M510BB has a last call voice recording function automatically saves up to two minutes of an incoming call.The NMEA 2000(R) network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.On the back of every CommandMicTM is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.Specifications General Usable channels USA, INT, CAN, WX channels Power supply requirement 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) Current drain (at 13.8 V DC) TX Max. power - 5.5 A Max.RX Max. audio - 1.5 A (One CommandMicTM) 4.5 A (Three CommandMicTM and RX hailer) Operating temperature range -20 degC ~ 60 degC, -4 degF ~ 140 degF Antenna impedance 50 ohm nominal Weight (approx.) RF unit - 890 g; 2 lbCommandMicTM - 400 g; 14.1 oz Transmitter Output power (at 13.8V DC) 25 W, 1 W (High, Low) Max. frequency deviation ±5 kHz Frequency tolerance ±0.5 kHz Spurious emissions Less than -70 dBc (High power), Less than -56 dBc (Low power) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Sensitivity FM (at 12dB SINAD) 0.22 μV typical Sensitivity DSC (at 1% BER) -7 dBμemf typical Adjacent channel selectivity FM More than 70 dB Adjacent channel selectivity DSC (1% BER) More than 73 dBμ emf Spurious response FM More than 70 dB Spurious response DSC (1% BER) More than 73 dBμ emf Intermodulation FM More than 75 dB Intermodulation DSC (1% BER) More than 68 dBμ emf Hum and noise More than 40 dB What's in the Box: IC-M510BB DC power cable (2 m) Microphone Hanger Connection cable, OPC-1540 (6.1 m, 20 ft) CommandMicTM, HM-195GW Connector cap Mounting base

Read more less

444 Compact Threaded Deck MountFits gunnels up to 2" thick. Secures with no exposed hardware using provided nylon nut.Comes with cap to seal the bottomWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

242 Rail Mount Adapter - 7/8"-1" - BlackFits 7/8" and 1" diameter round rail, and 1" square rail. For all Scotty post mount rod holders. Works with No. 241 side/deck mounts (not included). Includes: Stainless Steel FastenersWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

PYI 5 Thermal Camera Mount VerticalModel: PM5-FMD-8A 5 in tall vertical mount for thermal cameras. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 8 in in diameter.For FLIR MD and Raymarine T200 seriesSpecifications Plate Size 8 in Height 5.63 in "

Read more less

TripleShot™ HD T/M Bracket for Eagle Eye™Transom mount bracket for Eagle TripleShot HD Transducer.

Read more less

ROKK Mini Adjustable BodyROKK Mini is a compact and multi adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras. Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech onboard. No compromise.Features: Offers a large selection of base mounts to mount your devices how you want, where you want Designed, not just made; with features that you'll feel and hear more than you'll see Quick install/release with one reassuring click your tech is both secured and released A metal-on-metal locking system multiples your clamping efforts to achieve 100% locking force.  *Sold as an Individual Specifications: Cut/Uncut: Cut Mounting Style: Universal Box Dimensions: 3"H x 3"W x 6"L WT: 0.5 lbs UPC: 5060114795532 Quick Guide (pdf)

Read more less

5M Cable for HALO Dome Radar/Nemesis™5M cable for HALO Dome Radar. Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 8"L WT: 1.2 lbs UPC: 9420024173893

Read more less

Large Offset Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 18.5" x 15.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Simrad RS-100-B Balck Box VHF & AIS with GPS-500Model: 000-15641-001 Integrated Class-B AIS transmitter and receiver Bundled with dedicated GPS receiver, GPS-500 for AIS transmission Class D DSC approved VHF radio Integrated GPS receiver Connect up to four wireless and four wired handsets Add an optional loudhailer and up to four external speakers NMEA 0183(R) and NMEA 2000(R) connectivity 60-second audio rewind Configurable external speakers with volume offsetting Handset backlight settings can be grouped with NMEA 2000(R) backlight groups so MFD's and VHF Radios can have backlight controlled together Track Buddy - track up to five "buddies" using their VHF MMSI Navigate safely with the Simrad RS100-B VHF marine radio - integrated with a Class-B AIS transceiver and GPS. Stay connected from anywhere on your vessel with up to eight handsets (four wired and four wireless) and four external speakers. An external GPS-500 delivers advanced AIS functionality.The RS100-B system features a Class-B AIS receiver and transmitter, so not only is your boat's position identifiable to nearby AIS-enabled vessels but theirs are also visible to you. The integrated AIS receiver is a valuable aid to help avoid collisions in crowded harbours and waterways. It monitors the location of all nearby AIS-enabled vessels, providing real-time information in any weather condition, night and day. AIS information can be viewed directly on the radio's screen or via a compatible multifunction device, as an overlay on a chart or radar screen.The RS100-B is a modular VHF system that's expandable and customisable to suit any boat and any on-water communication needs. The standard package includes one wired handset and one external speaker. This setup is expandable up to eight handsets (four wired and four wireless) and four external speakers - ideal for use as an on-board intercom with Simrad HS40 wireless or HS100 wired handsets. The wireless handsets duplicate the radio display and controls on easy-to-read screens viewable under all lighting conditions, even bright sunlight. All primary functions are accessible from the handset with channel scan and favourites, alphanumeric keypad, clear audio, handset station naming and 60-second audio rewind.What's in the Box: NRS-2 Black Box HS-100 handset SP-100 Speaker GS-500 GPS Antenna

Read more less