Search results for "radar mounts"

GPS / VHF Antenna Mount for Self Levelling Radar MountSingle mount for installing an additional GPS / VHF antenna above the radar.Features Attaches to top of radome cradle Fits all standard GPS / VHF antennas with 1? x 14 tpi thread attachment Materials Marine grade 316 stainless steel GPS / VHF Antenna Mount Kit 1 x GPS / VHF mount 2 x M6 x 8mm bolts 2 x M6 spring washers Specifications: Type: Light/GPS Brackets Construction: Stainless Steel Box Dimensions: 1"H x 1"W x 4"L WT: 0.15 lbs UPC: 5060114791114

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M2This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

Direct Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 11"W x 11"L WT: 2.3 lbs UPC: 015568089794 Quick Guide (pdf)

Read more less

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 3.79 lbs UPC: 015568089770 Quick Guide (pdf)

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M1This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - BlackImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Features: Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.  Durable Made from marine-grade polymer Compatible Manufacturers: B & G Garmin Humminbird Koden Lowrance Raymarine Simrad

Read more less

APT-250-02 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Aluminum Height: 9.84 Type: Aft Leaning Mount Box Dimensions: 8"H x 9"W x 15"L WT: 5 lbs UPC: 5060114797734 Quick Guide (pdf)

Read more less

Mast MountsStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Fits:Furuno models: 1712,1715,1721,1722,1723,1724,1823,1824,DRS2DLowrance model: LRA 1500 Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 8"W x 16"L WT: 4.19 lbs UPC: 5060114790032 Quick Guide (pdf)

Read more less

RW4-5 Degree Wedge Mount for Simrad TX06S & TX10SImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Simple & Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.DurableMade from marine grade polymer King Starboard. Specifications: Construction: Polymer Type: Wedges Box Dimensions: 2"H x 13"W x 13"L WT: 2.3 lbs UPC: 839662002097 Quick Guide (pdf)

Read more less

APT-GPS-01 PowerTower® Center Mounted Bar f/GPS/VHF/Navtex AntennaMounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.  Works with standard 1” x 14 TPI thread.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 12.48" (404mm) Mount Position - Center In the Box: Antenna bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Mounting Brackets Height: 12.48 Box Dimensions: 4"H x 15"W x 19"L WT: 3.7 lbs UPC: 5060114795433 Quick Guide (pdf)

Read more less

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - WhiteImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Features: Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.  Durable Made from marine-grade polymer Compatible Manufacturers: B & G Garmin Humminbird Koden Lowrance Raymarine Simrad Specifications: Type: Wedges Box Dimensions: 2"H x 13"W x 14"L WT: 4.45 lbs UPC: 839662002066 Quick Guide (pdf)

Read more less

5" Vertical Modular Mount w/8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 9"W x 10"L WT: 5.2 lbs UPC: 839662009089 Quick Guide (pdf)

Read more less

Universal Mast Mount Platform for 12"18" RadomeSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno JRC Koden Lorenz Sitex VDO Specifications: Type: Mast Mount Box Dimensions: 5"H x 9"W x 17"L WT: 5.1 lbs UPC: 839662005234 Quick Guide (pdf)

Read more less

Radome Plate 1 for Raymarine, Garmin, B&G, Lowrance DomesThe modular Dual PowerTower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Features:Radome plate 1 (Raymarine, Garmin, B&G, Simrad and Lowrance radomes)

Read more less

18" Modular Mount AFT Raked 10 x 10 Base Plate for Large Sat Domes - 18" Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Aft Leaning Mount Height: 18" Box Dimensions: 13"H x 21"W x 21"L WT: 14.8 lbs UPC: 839662008990 Quick Guide (pdf)

Read more less

Seaview RW42BLK Radar Wedge - BlackModel: RW42BLKImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.Made from marine grade polymer King Starboard or injection molded ASA plastic (RW42).

Read more less

18" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: B&G Garmin Humminbird Lowrance Raymarine SImrad Specifications: Type: Mast Mount Box Dimensions: 7"H x 13"W x 20"L WT: 8.25 lbs UPC: 839662006606 Quick Guide (pdf)

Read more less

Dual PowerTower® Strut - RadomeThe Modular Dual PowerTower® has been designed to allow your radome radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications: Material: 6082 Aluminum extrusion Coating: Polyester powder Finish: Gloss white Specifications: Construction: Aluminum Type: Dual Mount Box Dimensions: 12"H x 22"W x 28"L WT: 15.2 lbs UPC: 5060114796317

Read more less

Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 RequiredThe Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS plastic. Drill templates come with all Seaview Top Plates. Simply drill the holes that are marked to your specific Simrad electronic. This makes for a very clean installation with no unecessary holes. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 4.4 lbs UPC: 015568089787 Quick Guide (pdf)

Read more less

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 3"H x 13"W x 13"L WT: 2.8 lbs UPC: 839662002622 Quick Guide (pdf)

Read more less

APT6003 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. Compatible with: Furuno - 1762, 1932, 1934, 1942, 1944, 1954, 851, DRS12A (6'), DRS12A (4'), DRS25A (4'), DRS25A (6'), DRS4A, DRS6A / DRS6A X CLASS, DRS6A-NXT radars Garmin - GMR 1224 xHD2, 1226 xHD2, 2524 xHD2, 2526 xHD2, 404, 406, 424 xHD2, 624 xHDS2, 626 xHD2 radars JRC - JMA 2344 / 5106 / 5206 (4') and JMA 2344 / 5106 / 5206 (6') radars Navman - 8000 Series (8084/8120) 4" radars Onwa - KRA-3002/4001 radars Raymarine - 5S / 9S / RA1048HD / RA1048SHD, 7S / 11S / RA1072HD / RA1072SHD, Cyclone 3'/4'/6', Magnum 4' 4kW/12kW, Magnum 6' 4kW/12kW radars Simrad - HALO 3/4/6 Pulse radars Sitex - MDS - 10 (4'), 10 (5') and RADARpc - 3/54.5 radars Features: Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad and Furuno Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower® Constructed from the best marine-grade aluminium Paint finishes complies with our unique 4 step marine paint system Technical Specifications: Radar Type - Open Array Material - Aluminum  Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 5.91 Box Dimensions: 8"H x 13"W x 13"L WT: 6 lbs UPC: 5060114796447 Quick Guide (pdf)

Read more less

Mast Bracket with Flybridge Adapter Kit18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms.Features: Anodized Marine Grade Aluminum and Powder Coated Brilliant White Heavy duty swiveling feet fit most mast and poles adding more strength and durability to platforms Models available for all brands of radomes Specifications: Construction: Aluminum Type: Mast Mount Box Dimensions: 6"H x 12"W x 20"L WT: 7.9 lbs UPC: 727908835625

Read more less

Seaview SVWPMF57M1BLK 5 Forward Lean Modular Mount BlackModel: PMF57M1BLKThis Seaview Modular Radar Mount works with 18 in - 24 in closed dome radars. The modular design allows you to add various accessories and different top plates at any point

Read more less

Universal 24" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno Garmin JRC Koden KVH Raymarine Simrad Sitex Specifications: Type: Mast Mount Box Dimensions: 7"H x 16"W x 21"L WT: 5.4 lbs UPC: 839662005227

Read more less