Search results for "bow thruster"

Stainless Steel Thru-Hull Short Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications: Hose size: (inch) 3/4" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 1" Barb Length: (inch) 1" Total Length: (inch) 2-1/2" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 3/4" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 022697665416 Quick Guide (pdf)

Read more less

Both the 3-Button Windlass Remote Kit and the 5-Button Windlass & Thruster Kit are easily retrofitted to existing installations and include a replaceable battery. The fobs float and are waterproof to IP67 (1 Meter deep). Using over one billion individual codes, our proprietry encryption scheme prevents false triggering from any other device or similar fob. And both kits include a Receiver that supports up to eight remote key fobs (additional fobs sold separately). Allows wireless remote operation (up/Down) of any solenoid switched windlass. FCC & CE certified Kit includes one wireless fob and one receiver Notes: Most Lewmar products utilize solenoids although some of our smaller products may not. If in doubt contact your Lewmar representative.

Read more less

Charge Mate Pro 90Current limited electronic charge relay with high efficiency and reverse current protectionA secondary battery onboard requires a dedicated charging solution. The Charge Mate Pro makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example.The Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the ChargeMaster Pro.A marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips of the onboard electrical network.The Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications. The Charge Mate Pro 90 ensures a higher charge current for example when charging Lithium-Ion batteries. It is also perfectly suitable for large automotive alternators up to 180 A and can be used in parallel operation with a 225 Amp alternator to fulfill even higher continuous power demands of your equipment on board.Charge Mate Pro: for controlled charging from a single source.Applications:Leisure and professional marine and mobile applications. An effective solution for high power demand onboard and/or the need for prioritized or current limited charging.Features: Charges two battery banks from a single source. Electronic charge coupling with very low voltage drop. Makes effective dual charging possible. Suitable for all battery types, including Lithium-Ion. Charge current secondary battery limited to 40 or 90 A. High system reliability by prioritizing charging of the main battery. Unidirectional which blocks return current under all circumstances. Prevents power dips in the onboard electrical network. Suitable for all kinds of chargers and alternators. Monitoring with LED status indication. IP65 electronics in a corrosion-resistant casing with aluminum heat sinks. Fast and easy installation. General Specifications: Monitoring: LED (warnings and status indication) Output current: limited to 90 A; > 25 °C derating power Number of battery outlets: 2 Input voltage range: 9-32 V Parallel configuration: Yes Battery voltage: Automatic 12/24 V detection Remote switch functions: On, off, auto, start to assist Dimensions, hxwxd: 157 x 140 x 80 mm/6.2 x 5.5 x 3.1 inch Weight: 0.88 kg/1.9 lb Compliance: CE Technical Specifications: Connection possibilities: 3 x faston connectors (switch, ground, and status) • switch: for an optional single-pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator Power consumption: Switch open: < 1 mA at 12/24 V DC Battery types: All types (Lithium-Ion protection via Multipurpose Contact Output, product code 77030500) Switch on voltage: 13.5 V (12 V) / 27 V (24 V) Switch on delay: 5 sec Switch off voltage: 12.75 V (12 V) / 25.5 V (24 V) Switch off delay: 2.5 sec Relay: Electronically (MOSFETs with a low voltage drop of max 0.2 V) Temperature range (ambient temp.): -40 °C to 60 °C/-40 °F to 140 °F Protection degree: IP65 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 1" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 1" inner diameter Flange Diameter: (inch) 2-1/4" Thread O.D. (outside diameter): (inch) 1-3/8"  Thread Length: (inch) 2-1/4" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-7/8" Install Hole Saw Size: (inch) 1-1/2"  Thread NPSM: (inch) 1" Max Hull Thickness: (inch) 1-3/4" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1" Material: Stainless Steel Box Dimensions: 3"H x 4"W x 7"L WT: 0.8 lbs UPC: 022697665485 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Short Straight Barbed - 1" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications: Hose size: (inch) 1" inner diameter Flange Diameter: (inch) 2-1/4" Thread O.D. (outside diameter): (inch) 1-3/8"  Thread Length: (inch) 1-1/8" Barb Length: (inch) 1" Total Length: (inch) 2-1/2" Install Hole Saw Size: (inch) 1-1/2"  Thread NPSM: (inch) 1" Max Hull Thickness: (inch) 5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 3"L WT: 0.6 lbs UPC: 022697665423 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 5/8" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 2" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-3/4" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 1-1/16" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 5/8" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.5 lbs UPC: 022697665461 Quick Guide (pdf)

Read more less

Thrust Bearing, Thrust Washers, and Springs (712A, 912, T2400, T4000, ST712, VS190, AP3500)

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 1-1/8" inner diameter Flange Diameter: (inch) 2-1/4" Thread O.D. (outside diameter): (inch) 1-3/8"  Thread Length: (inch) 2-3/8" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-7/8" Install Hole Saw Size: (inch) 1-1/4"  Thread NPSM: (inch) 1" Max Hull Thickness: (inch) 1-3/4" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1-1/8" Material: Stainless Steel Box Dimensions: 2"H x 4"W x 7"L WT: 0.85 lbs UPC: 022697665492 Quick Guide (pdf)

Read more less

Newmar Nav-Pac 12v DC UPSModel: NP-12 Prevents voltage "drop-out" during engine start and/or other high intermittent loads such as Thrusters Absorbs line "spikes" Filters out electrical interference Provides supplemental voltage/battery back-up for up to 15 min. Marine communication/navigation electronics such as programmable data transceivers, GPS and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drop from engine start, noise and line spikes from alternators and motors, and conducted noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.Specifications Output 12 Volt @ 20 amps max. Dimensions 5.25? x 6.2? x 7.4? Battery Type Sealed Rechargeable 5.0 Amp-Hour Life 5-7 years Noise Filtering Audio through 200 MHZ Voltage Spike Protection Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 micro seconds) Back up Power @ 12v 8A Draw 15 Minutes 12A 8 Minutes 18A 2 Minutes 20A 1 Minute

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 3/4" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 2" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-3/4" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 1-5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 3/4" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.6 lbs UPC: 022697665478 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Short Straight Barbed - 1-1/2" Inner Diameter Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications: Hose size: (inch) 1-1/2" inner diameter Flange Diameter: (inch) 3" Thread O.D. (outside diameter): (inch) 1-7/8"  Thread Length: (inch) 1-1/4" Barb Length: (inch) 1-1/2" Total Length: (inch) 3-1/8" Install Hole Saw Size: (inch) 2"  Thread NPSM: (inch) 1-1/2" Max Hull Thickness: (inch) 5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1-1/2" Material: Stainless Steel Box Dimensions: 3"H x 3"W x 3"L WT: 1.2 lbs UPC: 022697665454 Quick Guide (pdf)

Read more less

Foulfree™ Multi-Surface Coating System - SmallThe Foulfree Multi-Surface Small Kit contains everything you need to coat the underwater components on smaller vessels.The Foulfree™ Multi-Surface coating system brings Propspeed’s industry-leading, biocide-free, foul-release protection to underwater components: multiple components, many substrates, one system. Outboard lower units and bracket assemblies, stabilising systems, thrusters, stabilising fins, and RIB tubes are all components that keep your boat agile, responsive, and ready for the water. When fouling strikes, drag climbs, fuel efficiency drops, and that perfect day on the water can suddenly turn into work. The Foulfree Multi-Surface System prevents marine growth from taking hold, delivering invisible, non-invasive, biocide-free protection that blends seamlessly with your boat’s aesthetics. It’s easy to apply and engineered to deliver performance throughout the entire boating season! Multi-Surface SystemA single coating system that applies quickly and effortlessly to a wide range of underwater components. Multiple components, many surfaces, one system.Industry-Leading ProtectionIndustry-leading, biocide-free, foul-release protection that powers the performance of your underwater components.Apply Today, Launch TomorrowFoulfree goes on in just 4 simple steps, with only a 10-minute overcoat window (20 °C / 68 °F). 12 hours later, you’re back on the water, doing what you love!Biocide FreeFoul-release, not antifoul. Foul-release coatings use physical means to reduce fouling, creating a surface that’s tough for marine organisms to adhere to.Tested On Various SubstratesTested to ISO and ASTM standards on more than 20 substrate classes, OEM parts, and factory coatings, Foulfree Multi-Surface achieved the highest adhesion ratings across all substrates. Designed to keep your components clean and performing, it lets you spend more time where it counts - on the water.Features: Pure Power Serious Speed Unmatched Comfort Specifications: Coverage: 5.4ft² / 0.5m² MSprime Dry Time: 10 minutes Cure Time: 12 hours (at 20° / 68°F) DFT: 97 microns What's Included? 1 x Removal Pad 1 x Prep Pad 1 x 60ml MSclean 1 x 60ml MSprime 1 x 60ml Foulfree Clear Coat 2 x Brushes

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/2" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 1-1/2" inner diameter Flange Diameter: (inch) 3" Thread O.D. (outside diameter): (inch) 1-7/8"  Thread Length: (inch) 2-1/2" Barb Length: (inch) 1-1/4" Total Length: (inch) 4-1/8" Install Hole Saw Size: (inch) 2"  Thread NPSM: (inch) 1-1/2" Max Hull Thickness: (inch) 1-7/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1-1/2" Material: Stainless Steel Box Dimensions: 3"H x 5"W x 8"L WT: 1.55 lbs UPC: 022697665515 Quick Guide (pdf)

Read more less

Foulfree™ Multi-Surface Coating System - MediumThe Foulfree Multi-Surface Medium Kit is created for RIBs and stabilising fins on yachts, and contains everything needed to coat underwater components.The Foulfree™ Multi-Surface coating system brings Propspeed’s industry-leading, biocide-free, foul-release protection to underwater components: multiple components, many substrates, one system. Outboard lower units and bracket assemblies, stabilising systems, thrusters, stabilising fins, and RIB tubes are all components that keep your boat agile, responsive, and ready for the water. When fouling strikes, drag climbs, fuel efficiency drops, and that perfect day on the water can suddenly turn into work. The Foulfree Multi-Surface System prevents marine growth from taking hold, delivering invisible, non-invasive, biocide-free protection that blends seamlessly with your boat’s aesthetics. It’s easy to apply and engineered to deliver performance throughout the entire boating season! Multi-Surface SystemA single coating system that applies quickly and effortlessly to a wide range of underwater components. Multiple components, many surfaces, one system.Industry-Leading ProtectionIndustry-leading, biocide-free, foul-release protection that powers the performance of your underwater components.Apply Today, Launch TomorrowFoulfree goes on in just 4 simple steps, with only a 10-minute overcoat window (20 °C / 68 °F). 12 hours later, you’re back on the water, doing what you love!Biocide FreeFoul-release, not antifoul. Foul-release coatings use physical means to reduce fouling, creating a surface that’s tough for marine organisms to adhere to.Tested On Various SubstratesTested to ISO and ASTM standards on more than 20 substrate classes, OEM parts, and factory coatings, Foulfree Multi-Surface achieved the highest adhesion ratings across all substrates. Designed to keep your components clean and performing, it lets you spend more time where it counts - on the water.Features: Pure Power Serious Speed Unmatched Comfort Specifications: Coverage: 21.5ft² / 2m² MSprime Dry Time: 10 minutes Cure Time: 12 hours (at 20° / 68°F) DFT: 97 microns What's Included? 1 x Removal Pad 1 x Prep Pad 1 x 240ml MSclean 1 x 240ml MSprime 1 x 240ml Foulfree Clear Coat 2 x Brushes

Read more less

NP-24 Nav-Pac - 24VMarine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.Features: Prevents voltage “drop-out” during engine start and/or other high intermittent loads such as Thrusters Absorbs line “spikes” Filters out electrical interference Provides supplemental voltage and battery backup for up to 15 min. Optional remote panel (773-5037-0) Specifications: Output: 24 Volt @ 15 amps max. Battery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air. Noise Filtering: Audio through 200 MHZ Voltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds) Back-Up Power: 8A for 15 minutes, 12A for 8 minutes, and 18A for 2 minutes Size: 6.0 x 6.75 x 7.5 inches (13.3 X 17.14 X 19 cm) Weight: 8 lbs. (3.6 kg) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less