Search results for "Bow Thruster"

BOW PRO 361 Bow Thruster 36KGF - 12VThe BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.Features: Range of Boat Size: 23ft - 28ft Thrust in pounds force: 80 lbs Motor horse power: 2 Tunnel- center line below the waterline: 125MM Voltage: 12V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Vetus BOW9512D Bow thruster 95 Kgf, 12 V, tunnel 185 mm diameter.Model: BOW9512D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements Specifications Thrust (kgf) 95 Power (kW) 5.7 Internal tunnel diameter (mm) 185 Weight (kg) 26 Voltage (V) 12 Current consumption (A) 610 Continuous operating time (min) 3 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

Bow Thruster BTQ 140-40 40KGF - 12V - D140 - 2.2kWBetter Performances, Lower AbsorptionThe 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.Features: The Gearbox is created so that the behavior of the propeller is unaffected in either direction. Boat size 23-29FT The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence. Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life. The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode. The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results. The MotorsNew-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.Top SafetyIn case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Read more less

Vetus BOW7512D Bow thruster 75 Kgf, 12 V, tunnel 185 mm diameter.Model: BOW7512D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements Specifications Thrust (kgf) 80 Power (kW) 4.4 Internal tunnel diameter (mm) 185 Weight (kg) 19 Voltage (V) 12 Current consumption (A) 500 Continuous operating time (min) 2 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

Bow Thruster BTQ 125-40 40KGF - 12V - D125 - 2.2kWBetter Performances, Lower AbsorptionThe 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.Features: The Gearbox is created so that the behavior of the propeller is unaffected in either direction. The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence. Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life. The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode. The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results. The MotorsNew-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.Top SafetyIn case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Read more less

Vetus BOW5512D Bow thruster 55 Kgf, 12 V, tunnel 150 mm diameter.Model: BOW5512D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements Specifications Thrust (kgf) 55 Power (kW) 3 Internal tunnel diameter (mm) 150 Weight (kg) 17 Voltage (V) 12 Current consumption (A) 350 Continuous operating time (min) 4 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

Lemar 185TT Tunnel ThrustersModel: 590006 No reservoir to install, no leaks and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin required Black box electronics prevents misuse and protects motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self resetting thermal protection on all motors Minimum silhouette hub for smooth water flow Easy plug together switch connections 185TT Tunnel ThrustersSpecifications Model 185TT 3.0 Hub Stainless Steel Voltage 12V Power (kw) 3.0 Tunnel size (mm) 185 Thrust(kgf) 58 Weight (kg) 20 What's in the Box:185TT 3.0 Kw 4HP Gen 2 Thruster, 2 Meter Motor Cable, and Blue Box ICU

Read more less

Vetus BOW6012D Bow thruster 60 Kgf, 12 V, tunnel 185 mm diameter.Model: BOW6012D A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements Specifications Thrust (kgf) 65 Power (kW) 3 Internal tunnel diameter (mm) 185 Weight (kg) 17 Voltage (V) 12 Current consumption (A) 280 Continuous operating time (min) 5 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

Lewmar 185TT Tunnel ThrustersModel: 590010 No reservoir to install, no leaks and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin required Black box electronics prevents misuse and protects motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self resetting thermal protection on all motors Minimum silhouette hub for smooth water flow Easy plug together switch connections 185TT Tunnel ThrustersSpecifications Model 185TT 5.0 Hub Stainless Steel Voltage 12V Power (kw) 5.0 Tunnel size (mm) 185 Thrust(kgf) 82 Weight (kg) 27 What's in the Box:Lewmar 185TT 5.0 Kw 6.7HP Gen Thruster, 2 Meter Motor Cable, and Blue Box ICU

Read more less

Lewmar 185TT Tunnel ThrustersModel: 590008 No reservoir to install, no leaks and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin required Black box electronics prevents misuse and protects motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self resetting thermal protection on all motors Minimum silhouette hub for smooth water flow Easy plug together switch connections 185TT Tunnel ThrustersSpecifications Model 185TT 4.0 Hub Stainless Steel Voltage 12V Power (kw) 4.0 Tunnel size (mm) Tunnel size (mm) 185 Thrust(kgf) 65 Weight (kg) 20 What's in the Box:Lewmar 185tt 4.0 Kw 5.4HP Gen Thruster, 2 Meter Motor Cable, and Blue Box ICU

Read more less

Vetus BOW4512D Bow thruster 45 Kgf, 12 V, tunnel 125 mm diameter.Model: BOW4512D Bow thruster 45 Kgf, 12 V, tunnel Ø 125 mm. The VETUS unique propeller blade design minimises cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels A strong synthetic propeller eliminates corrosion and reduces weight All VETUS manoeuvring systems meet the EMC requirements Specifications Thrust (kgf) 45 Power (kW) 3 Internal tunnel diameter (mm) 125 Weight (kg) 16 Voltage (V) 12 Current consumption (A) 300 Continuous operating time (min) 4 Ignition protected No Proportional No Retractable No Extended runtime No

Read more less

LEWMAR 185TT Tunnel ThrustersModel: 590012 No reservoir to install, no leaks and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin required Black box electronics prevents misuse and protects motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self resetting thermal protection on all motors Minimum silhouette hub for smooth water flow Easy plug together switch connections 185TT Tunnel ThrustersSpecifications Model 185TT 6.0 Hub Stainless Steel Voltage 12V Power (kw) 6.0 Tunnel size (mm) 185 Thrust(kgf) 97 Weight (kg) 27 What's in the Box:Lewmar 185TT 6.0Kw 8HP Gen Thruster, 2 Meter Motor Cable, and Blue Box ICU

Read more less

Lewmar 185TT Tunnel ThrustersModel: 590011 No reservoir to install, no leaks and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin required Black box electronics prevents misuse and protects motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self resetting thermal protection on all motors Minimum silhouette hub for smooth water flow Easy plug together switch connections 185TT Tunnel ThrustersSpecifications Model 185TT 5.0 Hub Stainless Steel Voltage 24V Power (kw) 185 Thrust(kgf) 82 Weight (kg) 27 What's in the Box:Lewmar 185TT 5.0 Kw 6.6HP Gen Thruster, 2 Meter Motor Cable, and Blue Box ICU

Read more less

For highly controlled manoeuvring in restricted situations Lewmar's TT electric Thrusters represent a move forward in design and function. Easy installation and maintenance free operation are benefits that attract both builders and owners. A comprehensive program of testing has proved that the new Lewmar Thrusters deliver efficient, balanced and supremely quiet performance. Range from 2.0kw (3 HP) to 15kw (20 HP) No reservoir to install, no leaks and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin required Black box electronics prevents misuse and protects motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self resetting thermal protection on all motors Choice of Joystick or Touch Panel controls Easy plug together switch connections Minimum silhouette hub for smooth water flow Specifications Voltage 12v Power 2.7Hp Tunnell size 5 1/2 in Thrust 81lbs

Read more less

Bow Thruster Panel w/Joystick & Time LapseSingle joystick panel for operating a Vetus bow or stern thruster. Supplied with quick connectors for BP29 series wiring harnesses. Capable of daisy chaining additional controls for multiple stations.Features: Protected against accidental or unauthorized operation Panel power on indicator Control circuit overload protection Built-in time lapse device when reversing the direction of rotation Automatic switch off after 30 minutes inactivity. This feature is user selectable during installation In the event of continuous running for more than 2 minutes there is a warning LED and buzzer and the thruster will switch off automatically. The panel will reset itself after 5 seconds. Watertight to IP 66 Dimensions: 85mm x 85mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Lewmar 140TT 2.2KW Tunnel Thruster- 12VModel: 590003 No reservoir to install, no leaks and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin required Blue box electronics prevents misuse and protects motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self resetting thermal protection on all motors No need for an anode Easy plug together switch connections Minimum silhouette hub for smooth water flow Sleek hydro-dynamic design Thick strong sections over stainless steel body Same installation method Same cassette seal meaning maintenance free 140TT 2.2KW Tunnel Thruster- 12VSpecifications Model 140TT2.2 Hub Composite 2.2 Voltage 12v Power (kw) 2.2 Tunnel size (mm) 140 Thrust(kgf) 42 Weight (kg) 13 What's in the Box:140TT 2.2 KW 3HP

Read more less

Both the 3-Button Windlass Remote Kit and the 5-Button Windlass & Thruster Kit are easily retrofitted to existing installations and include a replaceable battery. The fobs float and are waterproof to IP67 (1 Meter deep). Using over one billion individual codes, our proprietry encryption scheme prevents false triggering from any other device or similar fob. And both kits include a Receiver that supports up to eight remote key fobs (additional fobs sold separately). Allows wireless remote operation (up/Down) of any solenoid switched windlass. FCC & CE certified Kit includes one wireless fob and one receiver Notes: Most Lewmar products utilize solenoids although some of our smaller products may not. If in doubt contact your Lewmar representative.

Read more less

Bow Thruster Panel w/Buttons & Time LapseSingle touch panel for operating a Vetus bow or stern thruster. Supplied with quick connectors for BP29 series wiring harnesses. Capable of daisy chaining additional controls for multiple stations.Features: Protected against accidental or unauthorized operation Panel power on indicator Control circuit overload protection Built-in time lapse device when reversing the direction of rotation Automatic switch off after 30 minutes inactivity. This feature is user selectable during installation In the event of continuous running for more than 2 minutes there is a warning LED and buzzer and the thruster will switch off automatically. The panel will reset itself after 5 seconds. Watertight to IP 66 Dimensions: 85mm x 85mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Bow Thruster Extension Cable - 33'Connection cable 33' for use with Vetus thruster control panels. Quick Guide (pdf)

Read more less

Vetus Compact Thruster Panel with Joystick, Including Time DelayModel: BPJRControl panel with round cover for VETUS bow and stern thrusters. Delivered with white, black and chromed bezels. Waterproof to IP66 from the front.Specifications Child protection Yes Voltage (V) 12/24 Purpose Thurster control Sort control Joystick Proportional control No V-CAN No Build-in depth (mm) 90 Bezel White/Black/Chrome Function 0 Diameter (mm) 63 Cut-out diameter (mm) 52 What's in the Box: Joystick Panel Control White bezel Black Bezel Chrome Bezel

Read more less

Replacement Propeller for BTQ 125-30 & BTQ 125-40 Bow ThrusterQuick's replacement propeller is specifically for the BTQ 125-30 & BTQ 125-40 Bow Thruster.*Anode Not Included.

Read more less

Vetus Thruster Panel with Joystick and Time DelayModel: BPJE2Control panel with built-in time lapse device when reversing the direction of rotation. Offers optimum safety and performance. Watertight to IP66.Specifications Child protection Yes Voltage (V) 12/24 Purpose Thurster control Sort control Joystick Proportional control No V-CAN No Build-in depth (mm) 90 Bezel Synthetic Function 0 Width (mm) 85 Cut-out diameter (mm) 75 Height (mm) 85

Read more less

Replacement Propeller for D140 Bow Thruster - Right SideThis is a right-side replacement propeller for Quick’s BTQ 140-40 and BTQ 140-30 Bow Thruster.Features:5 propeller blade*Please note that an anode is not included.

Read more less

Replacement Propeller for Left Handed BTQ 185-55, BTQ 185-75 & BTQ 185-95 Bow ThrusterThis replacement propeller is for Quick BTQ 185-55, BTQ 185-75 & BTQ 185-95 Bow Thruster. Please note that this propeller is a left-hand propeller.Features:5 propeller blade*Please note that an anode is not included.

Read more less