ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal.Features: Accepts up to 1/2-inch diameter fender line Stainless steel construction and includes mounting hardware Includes two flush-mount stainless steel mounting plates and two stainless steel keys Quickly and easily install or move fenders when mooring Dimensions: Width: (inch) 2" Height: (inch) 1" *Line sold separately Quick Guide (pdf)Owner's Manual (pdf)

Read more less

FX-16 - Fluke Original replacement fluke for the FX-16 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

3 Piece Dock Bumper Kit - 1 Corner Piece, 2 18" Straight PiecesThis roto-molded bumper kit is fabricated from soft vinyl with UV Inhibitors and Fungicides. Each piece has angled ends to deflect craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications. Specifications: Color: White Box Dimensions: 6"H x 12"W x 19"L WT: 4.5 lbs UPC: 776113731000

Read more less

Dock Edge Flip-Up Dock Cleat 8"PolishedCast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Product Specifications: Part No.: 2608P-F Description: Dock Cleat, Flip Up, 8", Aluminum, Polished Weight: 1.5 lbs. Packaging Dimensions: 13 x 7 x 1 inches Specifications: Construction: Aluminum Alloy Finish: Polished Size: 8" Box Dimensions: 1"H x 5"W x 8"L WT: 1.8 lbs UPC: 776113426081

Read more less

A-3 Buoy 17" Diameter - WhiteThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 17" x 23" (43.2 x 58.4cm) Eye Diameter - 1.125" (2.9cm) Circumference - 53.4" (135cm) Volume - 14.5 gallons (54.9L) Boat Size - 40' - 50' (12.2 - 15.2M) *Sold as an Individual Specifications: Color: White Diameter (Inches): 17" Box Dimensions: 8"H x 18"W x 23"L WT: 6.8 lbs Brochure (pdf)

Read more less

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.Kit Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Clutch Release Handle Features The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope. The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope. The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck Case Material: Anodized Aluminum The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section. This two piece watertight case allows for quick and easy, on-deck,routine maintenance. Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up. The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain). The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs. High quality Stainless Steel chainwheels The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system. The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required. The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel. Exclusive Maxwell 3 YEAR Limited Warranty Specifications Maximum PUll: 1540 lbs Chain Short Link: 5/16" or 8mm Chain Speed (Anchor Retrieval): 79 ft per Minute Rope Speed (Anchor Retrieval): 65 ft per Minute Rope Size (Nylon 3 strand or 8 Plait): 5/8" Power Supply (DC): 12VDC Motor Power: 1000 Watts Net weight: 42 lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 12"H x 17"W x 19"L WT: 56 lbs UPC: 1000000002683

Read more less

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 11"H x 17"W x 20"L WT: 55 lbs UPC: 1000000002638 Brochure (pdf)

Read more less

A6 - 34" x 46-1/2" - Double Layer - BlackThe A-Series are double layered making them softer, more durable & reversible.Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements. Specifications: Color: Black Box Dimensions: 5"H x 15"W x 15"L WT: 4 lbs UPC: 817382010479

Read more less

12' King Pin Anchor Pole - 2-Piece - WhitePanther KPP120W King Pin Anchor Pole comes as a 2 Piece with a length of 12' and color white. 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of 3/4" diameter, high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while allowing easy bottom penetration. Rubber storage clips with mounting screws included. (8', single-piece pole also available.)Features: 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown Easy to store and transport Constructed of 3/4" diameter, high-impact fiberglass Equipped with molded foam grips

Read more less

Fender Holder w/Adjuster - WhiteTough and durable PVC mounting strap snaps over railings, lifelines or stanchions. Allows fender lines to be adjusted to length in a matter of seconds.

Read more less

Anchor Kit797 50' Premium Nylon Line 1.5lb Folding Anchor Watertight Buoyant Container - doubles as a bailer Nylon Snap Hook, for easy attachment to vessel For still water use. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

EZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush-mounted rod holders No special tools needed Made from high-impact, corrosion and UV-resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation & Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle as they would like. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mantis Underwater Add-On Light Add an additional light to expand the standard Mantis Dock Lighting System from a 3 light kit to a 4 light package. All necessary mounting hardware, Zip-Mount™ ties and cabling are supplied with the add-on light option package. Each Mantis Dock Lighting Kit can accommodate up to a maximum of 4 lights, to add addition lights, additional kits will need to be purchased (4 light maximum per kit).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

FX-23 Anchor - 15lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 39' to 45' (12 to 14 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 2,000lb (907kg) Shank Length - 36" (914mm) Fluke Length - 21" (533mm) Stock Length - 29" (737mm) Weight - 15lbs (6.8kg) *Sold as an Individual  Specifications: Weight (lbs): 15 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 4"H x 8"W x 38"L WT: 17.1 lbs UPC: 647124120230 Quick Guide (pdf)Brochure (pdf)

Read more less

Air PumpSpecially designed for inflating Polyform products.  High volume air pump,  can also be used on other inflatable products such as air mattresses and toys.*Sold as an Individual Owner's Manual (pdf)

Read more less

Anchor Ring & RopeAssists in anchor retrieval. Designed to lift anchor systems up to 80lbs where 10' or more of anchor chain is used. Lifting capacity based on anchor buoy size. *Buoy sold separately.

Read more less

Stripper Arm Kit For Freedom 800Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Read more less

A-Series A-5 Buoy 27" Diameter - WhiteThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue rope hold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy-duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  Technical Specifications: Size - 27" x 36" (68.6 x 91.4cm) Eye Diameter - 1.25" (3.2cm) Circumference - 84.9" (215.5cm) Volume - 47.6 gallons (180.2L) Boat Size - 60' and up (18.3M) *Sold as an Individual Specifications: Color: White Diameter (Inches): 27" Box Dimensions: 4"H x 18"W x 37"L WT: 18.5 lbs Brochure (pdf)

Read more less

Boat Line StrapThis versatile line holder keeps line and cords neat and easily accessible.  Made from UV resistant vinyl with stainless steel hardware for durability.*Sold as an Individual

Read more less

Solar Dock Cleat96-288-FAttractive and Functional with Powerful Solar Charging Performance & Mooring StrengthFeatures: Cast Aluminum Alloy Chassis Wide, Sturdy Base footprint 5 Super Bright white LEDs for side and base illumination (18000 milli Candela each) Polycarbonate side lenses Epoxy Monocrystalline solar panel Rechargeable, Replaceable AAA (Ni-MH) battery Waterproof to Standard IP65 Up to 12 hours illumination from a single charge Automatic On-At-Dusk Viewing Distance up to 325 ft. (100m) Optimal working temperature -4 degrees F to +140 degrees F (-20 degrees C to +60 degrees C) Dimensions: W= 10" (254mm) D= 3.9" (100mm) H= 3" (75.4mm) Specifications: Construction: Aluminum Alloy Finish: Grey Size: 10" Box Dimensions: 4"H x 5"W x 11"L WT: 1.75 lbs UPC: 776113962886

Read more less

Standard PVC Full Face Profile - 16' Roll - BlackIdeal for larger applications, this profile provides extra strength and security against damage to boats or property. Double internal channels with cross girder adds additional protection from impacts and provides a large contact area.WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 6"H x 23"W x 23"L WT: 18 lbs UPC: 776113116302

Read more less

Leather Mooring Line Chafe Kit - 1/2" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Standard "D" PVC Profile - 16' Roll - BlackThis versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of marine grade PVC with UV Inhibitors and Fungicides. Packaged in easy to use rolls for fewer joints.WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 4"H x 24"W x 24"L WT: 11.6 lbs UPC: 776113119303

Read more less

Dock Edge Flip-Up Dock Cleat 6" WhiteCast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Product Specifications: Part No.: 2606W-F Description: Dock Cleat, Flip Up, 6", White, Almag 35 Weight: 0.8 lbs. Packaging Dimensions: 7.5 x 7 x .75 inches Specifications: Construction: Aluminum Alloy Finish: Powder Coat Size: 6" Box Dimensions: 1"H x 4"W x 7"L WT: 0.9 lbs UPC: 776113260630

Read more less

Dock Edge Torpedo Bumper 18" WhiteThese large, durable bumpers add an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from the same Quality material as our Dolphin fenders, each weighs a rugged 2.7 lb. and measures 18" tall with a diameter of 5". Place them on dock leg pipes over the mounting brackets to prevent damaging your watercraft from protruding bolts.Product Specifications: Part No.: 91-110-F Description: Torpedo Bumper, 18", PVC, White Weight: 3.5 lbs. Packaging Dimensions: 18 x 6 x 6 inches WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 6"H x 6"W x 18"L WT: 3.2 lbs UPC: 776113911105

Read more less

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation UV stabilized plastic Quick Guide (pdf)Brochure (pdf)

Read more less

Mooring Snubber Kit with 3/8" x 20' Dock LineThis flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing the amount of line wrapped around it. Includes snubber and 20 ft. of solid braided multifilament polypropylene dock line.Specifications: Thickness (inch): 3/8" Length (feet): 20' Color: Blue Specifications: Color: Blue Length (Feet): 20' Rope Diameter (Inches): 3/8" Rope Type: Polypropylene Box Dimensions: 2"H x 6"W x 10"L WT: 1.05 lbs UPC: 022697117304 Quick Guide (pdf)

Read more less

DockSide™ Oceanus BumpersThese Heavy Duty roto-molded bumpers' incorporate all the benefits of a multi-usage product with the strength and integrity you've come to know from DockEdge products. Due to its' design it will not only protect the lower bow but anywhere you install an Oceanus bumper. Fabricated to be permanently secured in place, it also has grooves which act as reinforcing ribs and can be used for temporary strapping in places where fastening isn't allowed.Ideal for commercial & marina applications.Fabricated with UV Inhibitors and Fungicides. Includes screw-in inflation valve. Specifications: Color: White Box Dimensions: 5"H x 9"W x 35"L WT: 10 lbs UPC: 776113730713

Read more less

FX-11 - Mud Palm Set - Pair Original replacement mud palms for the FX-11 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as a Pair

Read more less

FX-11 - StockOriginal replacement stock for the FX-11 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

FX-7 - Mud Palm Set - Pair Original replacement mud palms for the FX-7 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as a Pair

Read more less

FX-7 - Stock Original replacement stock for the FX-7 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual Quick Guide (pdf)

Read more less

Anchor Rode - 20' of 10mm Chain & 200' of 5/8" Rope20' of 10mm Chain, 200' of 5/8" Rope.Slim Splice Quick System Rope & ChainAn anchor rode is the connection system between the anchor and the boat, and its sturdiness during mooring is undoubtedly essential.The critical point of the rope and chain combination is the joint, or technically speaking, the splice.In Quick's Slim Splice, the splice is much slimmer and more tapered, preventing the jamming which often occurs on the gypsy, during changeover from rope to chain.Quick's Slim Splice consists of a calibrated chain and a top quality 3-strand polyester rope, to guarantee optimum strength and life. Specifications: Rope Type: 3-Strand Nylon Rope Length (Feet): 200' Rope Diameter (Inches): 5/8" Chain - Length (Feet): 20' Chain - Diameter (Inches): 10mm Box Dimensions: 13"H x 15"W x 15"L WT: 55.43 lbs UPC: 688614354100

Read more less

A-1 Buoy 11" Diameter - RedThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 11" x 15" (27.9 x 38.1cm) Eye Diameter - 1" (2.5cm) Circumference - 34.6" (87.8cm) Volume - 3.5 gallons (13.2L) Boat Size - 15 - 30 (4.6 - 9.1M) *Sold as an Individual Specifications: Color: Red Diameter (Inches): 11" Box Dimensions: 5"H x 11"W x 14"L WT: 2.35 lbs Brochure (pdf)

Read more less

Wake Watchers Mooring SystemFeatures: Protects passengers and your boat Securely moors boats up to 3500 lbs (1500 kg) Protects your boat from dock contact Allows your boat to come close to the dock for easy passenger boarding Automatically repositions your boat safely 3 ft (1m) away from the dock Adjustable tension Resists lateral, vertical & horizontal motion Featured in Popular Science magazine

Read more less

Anchor BuoyAttwood's Anchor Buoy is constructed using premium marine grade vinyl construction for superior durability. The buoys are soft and pliable to prevent scratching and have built in UV inhibitors to guard against discoloration of the high visibility fluorescent orange. These buoys use "MicroGuard" technology to protect from rotting, mold and mildew. Premium marine grade vinyl UV protection 9" diameter Fluorescent orange color WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Orange Diameter (Inches): 9" Box Dimensions: 9"H x 10"W x 13"L WT: 2.25 lbs UPC: 022697093509

Read more less

G-2 Twin Eye Fender 4.5" x 15.5" - WhitePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm) Eye Diameter - .5" (1.3cm) Circumference - 14.1" (35.9cm) Volume - .7 gallons (2.6L) Boat Size - 10' - 15' (3 - 4.6M) Weight - 1.4lbs *Sold as an Individual Specifications: Color: White Height: 15.5" Width: 4.5" Box Dimensions: 4"H x 4"W x 16"L WT: 1.2 lbs UPC: 743952003124 Brochure (pdf)

Read more less

Folding Stud Mount Cleat - 4-1/2" - Investment Cast 316 Stainless SteelThese highly polished Folding Stud Mount Cleats lock down when not in use and flip back up when it’s time to tie off. Surface mount means there are no drain tubes or receptacles required to prevent leaks. Installation is easy with two standard bit size holes drilled for the studs (no cutouts or hole saws required). The stud-mounted fasteners are hidden for an attractive, flush appearance. Constructed of corrosion-resistant investment-cast 316 stainless steel.Specifications:Fastener: 1/4"-20 NC Specifications: Construction: Stainless Steel Finish: Silver Size: 4.5" Box Dimensions: 2"H x 6"W x 10"L WT: 0.84 lbs UPC: 035514041607

Read more less

NF-4 Heavy-Duty Twin Eye 6.4" x 21.6" - BlueThe NF-Series Boat Fender features multiple-ribbed, reinforced ropeholds, making it the strongest fender in its class. The NF-Series is an extra-tough recreational-boating fender for smaller boats and a good choice for use in boat locks and tidal areas where fenders are exposed to high-stress situations. The NF-Series is designed to last and stand up in the toughest conditions, as well as being compact for easy storage in smaller craft.Features: Durable integrated ropehold Small boat fender with commercial-grade strength Reliable single-piece construction Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Designed for smaller boats that need heavy-duty fenders, for use in both permanent protected and unprotected moorings Unique Polyform vinyl valve system for years of service Made in the USA Specifications: Diameter: 6.4" Length: 21.6" Circumference: 20.1" Eye Diameter: 0.75" Volume: 2.1 gallons Weight: 3 lbs Recommended Boat Size: 20'-25'

Read more less

NF-4 Heavy Duty Twin Eye Fender 6.4" x 21.6" - WhiteThe NF-Series Boat Fender, one of Polyform's newest innovations, features multiple-ribbed, reinforced ropeholds, making it the strongest fender in its class. The NF Series is an extra tough, recreational-boating fender and a good choice for use in boat locks and tidal areas where fenders are exposed to high stress situations.  The NF Series is designed to last and stand up in the toughest conditions as well as being compact for easy storage in smaller craft.Features: The NF Series blends the styling of the G Series (the world's most copied fender) and the multi-ribbed ropehold of the F Series (the strongest fender in its class) Sleek one-color styling Reinforced twin-eye ropeholds for flexibility and durability Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.4" x 21.6" (16.3 x 54.9cm) Eye Diameter - .75" (1.9cm) Circumference - 20.1" (51.1cm) Volume - 2.1 gallons (7.9L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 3.06lbs *Sold as an Individual Specifications: Color: White Height: 21.6" Width: 6.4" Box Dimensions: 5"H x 7"W x 21"L WT: 2.9 lbs UPC: 743952004725

Read more less

FOOTSWITCHESMaxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation Quick Guide (pdf)Brochure (pdf)

Read more less

Open Base Cleat - Investment Cast 316 Stainless SteelThese Open Base Cleats provide easy line tie-off and corrosion resistance in a classic style. Constructed of corrosion-resistant investment-cast 316 stainless steel. Installs with four FH through-bolts (not included).Specifications:Fastener: #10 FH Specifications: Construction: Stainless Steel Finish: Polished Size: 4" Box Dimensions: 1"H x 4"W x 8"L WT: 0.21 lbs UPC: 035514041072

Read more less

F-7 Twin Eye Fender 15" x 41" - WhitePolyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.  The F Series fender has offered protection to the world's finest yachts and fishing vessels.  Why?  Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice! Classic European twin-eye style boat fenders for the most discerning eye.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 15" x 41" (38.1 x 104.1cm) Eye Diameter - 1" (2.54cm) Circumference - 47.1" (119.7cm) Volume - 18.8 gallons (71.2L) Boat Size - 50' - 60' (15.2 - 18.3M) Weight - 10.9lbs *Sold as an Individual Specifications: Color: White Height: 41" Width: 15" Box Dimensions: 1"H x 19"W x 34"L WT: 12 lbs UPC: 743952005531 Brochure (pdf)

Read more less

Water Ski Series Buoy - GreenDesigned to compliment our S-1 Watersport Buoy, the WS-1 Slalom Buoy gives Polyform a complete watersports package offering to our customers.  Made of high quality PVC and featuring a strong ropehold, this buoy is built to last for a long time. The WS-1 meets American Waterski Association specifications for record capability tournaments.  Add in the S-1's for use as boat path markers and you've got the ultimate in course markers.Features: Meets official American Waterski Association specifications for record capability tournaments Multiple colors to mark both ski and boat courses High quality PVC construction Durable ropehold Technical Specifications: Size (diameter x length) - 8" x 8.5" (20.3 x 21.6cm) Eye Diameter - .375" (.95cm)  Circumference - 25.1" (63.9cm) Volume - 1.6 gallons (6.1L) *Sold as an Individual  Specifications: Color: Green Diameter (Inches): 8" Box Dimensions: 4"H x 8"W x 8"L WT: 0.6 lbs UPC: 743952140003

Read more less

F-7 Twin Eye Fender 15" x 41" - BlackPolyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.  The F Series fender has offered protection to the world's finest yachts and fishing vessels.  Why?  Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice! Classic European twin-eye style boat fenders for the most discerning eye.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 15" x 41" (38.1 x 104.1cm) Eye Diameter - 1" (2.54cm) Circumference - 47.1" (119.7cm) Volume - 18.8 gallons (71.2L) Boat Size - 50' - 60' (15.2 - 18.3M) Weight - 10.9lbs *Sold as an Individual Specifications: Color: Black Height: 41" Width: 15" Box Dimensions: 8"H x 19"W x 32"L WT: 11.15 lbs UPC: 743952005500 Brochure (pdf)

Read more less

Galvanized Brush GripperThe YakGear Brush Gripper clamps tightly to brushes, limbs, and various other objects. Simply squeeze to open the jaws; release to close. These brush grippers clamp down tight for a secure hold on limbs. It is great for containing, hanging, and securing any number of items in the backyard or around the campsite. The spring-loaded tension design ensures a tight hold with no play. Includes rope. Specially designed with spring-loaded tension, so the harder users pull, the tighter it grips.Features: Galvanized brush gripper Secures items to a limb or branch Spring-loaded to ensure a tight hold 8 ft. of rope included 1-year warranty

Read more less