FREE SHIPPING ON ORDERS OVER $100.00 Dollars!

Close
  • Attwood Anchor Lift System [13710-4]

    Attwood Marine Attwood Anchor Lift System [13710-4]

    Anchor Lift SystemThis convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats.nAnchor secures within anchor mount housing. Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob. Includes: Anchor Mount/Rope Guide Assembly  Anchor Rope Reel Assemblyn Rear Pulley, Rear Pulley Axeln Other Features:n nAnchor deploys and lifts smoothly and securely.   Easy installation with detailed instructions. n Multiple mounting solutionsn Anchor stows conveniently in anchor mount housingn *Anchor, rope, and mounting hardware not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $63.41 $43.99

  • TRAC Outdoors Deckboat 40-G3 Electric Anchor Winch w/AutoDeploy [69005]

    TRAC Outdoors TRAC Outdoors Deckboat 40-G3 Electric Anchor Winch w/AutoDeploy [69005]

    Deckboat 40-G3 Electric Anchor Winch with AutoDeployThe TRAC Outdoors Deckboat 40-G3 Electric Anchor Winch with AutoDeploy allows you to automatically raise and lower your anchor with easy-to-use buttons. AutoDeploy works by simply pressing and releasing the down button.  When the anchor reaches the bottom, the winch will shut-off, holding the boat in place.  It has a maximum anchor capacity of 40 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands. *Anchor not includedTechnical Specifications: Boat Size - Up to 26' Anchor Capacity - 40 lb Anchor Deployment - Power Down or AutoDeploy Down Rope Speed Down - 70 FPM Rope Speed Up - 65 FPM Power - 12 V Dimensions (L x W x H) - 19.5" x 9.75" x 5.75"  In the Box: Winch w/integrated anchor roller 100' of 3/16" pre-wound double braid anchor rope Sealed membrane UP/DOWN/AutoDeploy switch Marine-grade battery wire - 17' Assembly hardware and  Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Vertical/Horizontal: Horizontal Chain - Diameter (Inches): N/A Rope Diameter (Inches): 3/16" Freefall: No Box Dimensions: 7"H x 10"W x 16"L WT: 13.95 lbs UPC: 666996102199 Owner's Manual (pdf)

    $392.99 $271.99

  • Dock Edge UltraGard PVC Dock Bumper - 35" - Black [1008-B-F]

    Dock Edge Dock Edge UltraGard PVC Dock Bumper - 35" - Black [1008-B-F]

    UltraGard™ PVC Dock Bumper - 35" - BlackThis bumper is manufactured from the same quality material as our Dolphin Boat Fenders and offers the ultimate in cushioning of impacts from your boat. Molded-in ribs on the interior of the UltraGard ensure it is very soft, but durable and will not collapse. The back has a slight radius allowing for easy mounting on pilings as well. Specifications: Color: Black Box Dimensions: 3"H x 6"W x 36"L WT: 3.6 lbs UPC: 776113100868

    $40.29 $33.99

  • Sea-Dog Double Braided Nylon Dock Line - 5/8" x 35 - White [302116035WH-1]

    Sea-Dog Sea-Dog Double Braided Nylon Dock Line - 5/8" x 35 - White [302116035WH-1]

    Double Braided Nylon Dock Line - 5/8" x 35' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 35' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 4"H x 10"W x 14"L WT: 4.1 lbs UPC: 035514303347

    $75.00 $40.99

  • YakGear 5lb Mushroom Anchor [01-0010-01B]

    YAKGEAR YakGear 5lb Mushroom Anchor [01-0010-01B]

    5lb Mushroom AnchorThe YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base.Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys.Features: 5 lb. inverted mushroom-shaped anchor Cast iron and vinyl coated in black 1-year warranty Specifications: Color: Black Construction: Carbon Fiber Weight (lbs): 5 Box Dimensions: 6"H x 6"W x 6"L WT: 5.15 lbs UPC: 853628005816

    $29.99 $19.99

  • Sea-Dog Rail Mount Stainless Steel Fender Holder Dual - 7.5" [327357-1]

    Sea-Dog Sea-Dog Rail Mount Stainless Steel Fender Holder Dual - 7.5" [327357-1]

    Rail Mount Stainless Steel Fender Holder Dual - 7.5"The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $125.00 $77.99

  • Sea-Dog Double Braided Nylon Dock Line - 5/8" x 50 - White [302116050WH-1]

    Sea-Dog Sea-Dog Double Braided Nylon Dock Line - 5/8" x 50 - White [302116050WH-1]

    Double Braided Nylon Dock Line - 5/8" x 50' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 50' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 6"H x 6"W x 6"L WT: 7 lbs UPC: 035514303354

    $104.55 $53.99

  • Dock Edge Postlite Solar LED Post Light 2pk [96-258-F]

    Dock Edge Dock Edge Postlite Solar LED Post Light 2pk [96-258-F]

    Dock Edge Postlite Solar LED Post Light 2PK Powerful solar charging performance 6 possible colors to choose from Change colors with a flip of a switch Easy twist-on lid with large rubber seal 360 Degree lenticular light diffusing lens and domed reflector maximize light output Installs easily with no wires Universal fittings for 1-5/8", 1-7/8", 2-3/8", Brock Post and 3-1/4" ID posts, universal flat surfaces Product Specifications: Part No.: 96-258-F Description: PostLite, Solar, LED White, (2pk) Owner's Manual (pdf)

    $77.51 $73.99

  • Polyform F-5 Twin Eye Fender 11" x 30" - Black [F-5 BLACK] Polyform F-5 Twin Eye Fender 11" x 30" - Black [F-5 BLACK]

    Polyform U.S. Polyform F-5 Twin Eye Fender 11" x 30" - Black [F-5 BLACK]

    F-5 Twin Eye Fender 11" x 30" - BlackPolyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.  The F Series fender has offered protection to the world's finest yachts and fishing vessels.  Why?  Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice! Classic European twin-eye style boat fenders for the most discerning eye.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - 1" (2.54cm) Circumference - 34.6" (87.8cm) Volume - 7.3 gallons (27.6L) Boat Size - 30' - 40' (18.29 - 21.34M) Weight - 7.6lbs *Sold as an Individual Specifications: Color: Black Height: 30" Width: 11" Box Dimensions: 6"H x 15"W x 24"L WT: 6.4 lbs UPC: 743952005418 Brochure (pdf)

    $138.99 $120.99

  • Polyform 17" CM Mooring Buoy w/Galvanized Iron - White Blue Stripe [CM-3 WHITE W/STRIP]

    Polyform U.S. Polyform 17" CM Mooring Buoy w/Galvanized Iron - White Blue Stripe [CM-3 WHITE W/STRIP]

    17" CM Mooring Buoy w/Galvanized Iron - White Blue StripeThe CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring. With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS).  To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide). The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide. Features: Large eye (4-3/8") and swivel (1-1/2") provide maximum strength Soft vinyl surface won't harm boat finishes Polyform's unique vinyl valve seals securely Even wall thickness for strength and durability One (1) piece design Technical Specifications: Mooring Iron - Galvanized Steel with protective vinyl-coated eye Size - 17" x 22" (43.2 x 55.9cm) Tube Diameter - .625" (1.6cm) Circumference -  53.4" (138.7cm) Volume - 11.8 gallons (44.7L) *Sold as an Individual Specifications: Color: White Diameter (Inches): 17" Box Dimensions: 9"H x 11"W x 37"L WT: 11.8 lbs UPC: 743952903042

    $239.99 $204.99

  • Monarch Line Mate Junior [LMJ-1]

    Monarch Marine Monarch Line Mate Junior [LMJ-1]

    Line Mate JuniorLine Mate Jr. is designed to hold your mooring lines. This unique product is also ideal for keeping dockside power lines from hanging in the water-or for water hoses so they are out of the way, so no one can trip on them. A handy aid in docking on windy days, when docking can be a problem. Use your boat hook to grab onto the Line Mate Jr. and pull boat toward dock. The Line Mate Jr. is a heavy-duty casting made of Almag 35. A composition of Aluminum for corrosion resistance and Magnesium for strength.

    $61.99 $43.99

  • Polyform True Fit 2 Fender Holder Kit - 12" Diameter [TFR-280-2]

    Polyform U.S. Polyform True Fit 2 Fender Holder Kit - 12" Diameter [TFR-280-2]

    True Fit 2 Fender Holder Kit - 12" Diameter Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel.  The modular design and hardware attachments allow for a wide array of options for boat fender storage.The modular system fits rails from 7/8" to 1" at any height or angle.  Because of its modular design, you can add on additional fender holders as your needs change. Compatible With:F-5 Fenders, G-6 Fenders, NF-5 and HTM-3 FendersFeatures: A versatile system for easy installation Durable construction for years of service  Flexible modular design - add on or reconfigure at anytime Technical Specifications: Made from 304 Stainless Steel wire Dimension (individual Fender Holder) Inside Diameter - 12" Dimension (individual Fender Holder) Length - 25" Weight (kit) - 3.7 lbs In the Box: Two (2) TFR-280 Holders Three (3) TFR-402 Swivel connectors (7/8" - 1" Rail) Two (2) TFR-403  Parallel connectors *Sold as a Kit

    $239.99 $220.99

  • Polyform A-4 Buoy 20.5" Diameter - Grey [A-4 GREY] Polyform A-4 Buoy 20.5" Diameter - Grey [A-4 GREY]

    Polyform U.S. Polyform A-4 Buoy 20.5" Diameter - Grey [A-4 GREY]

    A-4 Buoy 20.5" Diameter - GreyThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 20.5" x 27" (52.1 x 68.6cm) Eye Diameter - 1.125" (2.9cm) Circumference - 64.4" (163.6cm) Volume - 22.5 gallons (85.2L) Boat Size - 50 - 60' (15.2 - 18.3M) *Sold as an Individual Specifications: Diameter (Inches): 20.5" Color: Grey Box Dimensions: 10"H x 20"W x 26"L WT: 9.65 lbs Brochure (pdf)

    $137.99 $109.99

  • Polyform HTM-3 Fender 10.5" x 27" - Orange [HTM-3 ORANGE] Polyform HTM-3 Fender 10.5" x 27" - Orange [HTM-3 ORANGE]

    Polyform U.S. Polyform HTM-3 Fender 10.5" x 27" - Orange [HTM-3 ORANGE]

    HTM-3 Fender 10.5" x 27" - OrangeIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm) Tube Diameter - 0.625" (1.6cm) Circumference -  33" (83.8cm) Volume -  9.2 gallons (34.8L) Boat Size - 30' - 40' (9.1 - 12.2M) Weight - 7.7lb *Sold as an Individual Specifications: Color: Orange Height: 27" Width: 10.5" Box Dimensions: 9"H x 9"W x 26"L WT: 7.7 lbs UPC: 743952002196 Brochure (pdf)

    $111.99 $95.99

  • Polyform Fender Cover f/F-3 Fender - Black [EFC-03 BLACK]

    Polyform U.S. Polyform Fender Cover f/F-3 Fender - Black [EFC-03 BLACK]

    Fender Cover for F-3 Fender - BlackFender covers should be as tough as the fenders they protect.  That was our criteria used in developing the Elite Fender Cover series. Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure.  Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet.  The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split.  This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.Compatible With:F-3 FendersFeatures: Hand-crafted with heavy-duty polyester fabric for durability Sun resistant, abrasion-resistant and water-resistant Washable Custom fit for a tailored look A tough 1/4" line drawstring closure Quick and easy installation *Sold as an Individual Specifications: Color: Black Box Dimensions: 1"H x 9"W x 13"L WT: 1 lbs UPC: 743952008228 Brochure (pdf)

    $55.99 $48.99

  • Polyform G-3 Twin Eye Fender 5.5" x 19" - Blue w/Adapter [G-3 BLUE W/AIR ADAPTER]

    Polyform U.S. Polyform G-3 Twin Eye Fender 5.5" x 19" - Blue w/Adapter [G-3 BLUE W/AIR ADAPTER]

    G-3 Twin Eye Fender 5.5" x 19" - Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 5.5" x 19" (14 x 48.3cm) Eye Diameter - .625" (1.6cm) Circumference - 17.3" (43.9cm) Volume - 1.4 gallons (5.3L) Boat Size - 15' - 20' (4.6 - 6.1M) Weight - 1.9lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 19" Width: 5.5" Box Dimensions: 1"H x 3"W x 6"L WT: 2.1 lbs Brochure (pdf)

    $27.99 $20.99

  • Polyform G-6 Twin Eye Fender 11" x 30" - Black w/Adapter [G-6 BLACK W/AIR ADAPTER]

    Polyform U.S. Polyform G-6 Twin Eye Fender 11" x 30" - Black w/Adapter [G-6 BLACK W/AIR ADAPTER]

    G-6 Twin Eye Fender 11" x 30" - Black with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 30" Width: 11" Box Dimensions: 1"H x 3"W x 6"L WT: 6.65 lbs Brochure (pdf)

    $87.99 $76.99

  • Minn Kota Raptor Universal Sandwich Adapter - Black [1810388] Minn Kota Raptor Universal Sandwich Adapter - Black [1810388]

    Minn Kota Minn Kota Raptor Universal Sandwich Adapter - Black [1810388]

    Raptor Universal Sandwich Adapter - BlackMounts between your jack plate and transom or between the outboard and transom, for use in both port and starboard Raptor mounting applications.Features: Allows installation of jack plate brackets without a jack plate Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty

    $139.99 $134.99

  • Minn Kota MKA-26 Drift Sock [1865260]

    Minn Kota Minn Kota MKA-26 Drift Sock [1865260]

    A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish. 34" deep x 22" diameter Features 210 denier ripstop nylon with 4 heavy-duty 1" nylon strapsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $49.99 $42.99

  • Minn Kota Deckhand 25 [1810125]

    Minn Kota Minn Kota Deckhand 25 [1810125]

    DeckHand™ 25#1810125The DeckHand 25 has a 25-lb anchor capacity (anchor not included). Includes davit for stowing most styles of anchors. Pre-spooled with 60 feet of 800-lb test nylon rope. Runs on 12-volt battery (not included). Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Features 25-lb anchor capacity (anchor not included) Pre-spooled with 60 feet of 800-lb test nylon rope Davit can be mounted at base of DeckHand or in remote position on deck Davit stows most kinds of anchors Stow and deploy switch integrated into the base of the unit Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in teh rope becomes tight, rope is automatically released; lock the winch with the touch of a button Consistent hold pattern with older DeckHand models (DH-18, DH-20, DH-35) Includes: remote mountable anchor davit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 3/16" Vertical/Horizontal: Horizontal Freefall: No Box Dimensions: 9"H x 11"W x 15"L WT: 12.8 lbs UPC: 029402027897 Owner's Manual (pdf)

    $269.99 $218.99

  • Minn Kota Talon BT 10 Shallow Water Anchor - Red [1810440]

    Minn Kota Minn Kota Talon BT 10 Shallow Water Anchor - Red [1810440]

    Talon BT 10' Shallow Water Anchor - RedWhen you find the right fishing spot time is critical. You can’t wait to anchor, can’t wait to cast, and can’t be bothered to move until you get what you came for. That’s why we designed every inch of Talon to hold you in place effortlessly and relentlessly – every time out.  Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring) Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings Talon Remote: Lets you control stow, deploy, anchoring modes, multiple Talon selection and work light; comes standard with one wireless remote Bluetooth Connectivity: Control Talon from your mobile device (iOS or Android) and easily update software Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Vertical Deployment: Keeps Talon out of the way of your fishing lines Wave Absorption: Built-in floating suspension keeps your boat anchored down even in rough water, enabling your boat to move up or down without affecting the anchor Auto Up/Down: Automatically deploy or retract your Talon with the push of a button; no need to hold the button down Pivoting Design: Talon includes a mounting bracket that allows for up and down adjustments to fit any transom, 30 degrees of pivoting and easy removal Deployment Notification Alarm: Alerts you when trying to take off while Talon is deployed Saltwater-Tough Engineering: Keeps Talon safe from the corrosive effects of saltwater Specifications: Color: Red Box Dimensions: 11"H x 15"W x 54"L WT: 56.2 lbs UPC: 029402046089 Owner's Manual (pdf)Brochure (pdf)

    $2,199.99 $1,945.99

  • Lewmar 12V Motor f/Windlass V2 [60000189SPA]

    Lewmar Lewmar 12V Motor f/Windlass V2 [60000189SPA]

    12V Motor for Windlass V2This 12V motor is designed to power Lewmar's Windlass V2.

    $617.95 $407.99

  • Lewmar DTX Anchor - Stainless Steel - 14lb [0057206]

    Lewmar Lewmar DTX Anchor - Stainless Steel - 14lb [0057206]

    DTX Anchor - Stainless Steel - 14lbThe DTX anchor fills the gap between the existing galvanized and stainless Delta® anchors.Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosion performance and the enhanced aesthetics that stainless anchors offer. Utilizing lead ballast encapsulated within the tip of the anchor to achieve the perfect center of gravity, the DTX offers the initial bite and holding reliability that users of our Delta® anchors have come to expect.Features: Self-launching Ordinary holding power  Lead-ballasted tip for fast setting Technical Specifications: Material - Stainless Steel Recommended Chain Size - 1/4" Weight - 14lb (6kg) In the Box: Anchor Instruction manual *Sold as an Individual Specifications: Color: Stainless Construction: Stainless Steel Weight (lbs): 14 Box Dimensions: 10"H x 10"W x 18"L WT: 20 lbs Brochure (pdf)

    $672.95 $442.99

  • Lewmar Pro-Fish Retaining Pin Kit [66000619]

    Lewmar Lewmar Pro-Fish Retaining Pin Kit [66000619]

    Pro-Fish Retaining Pin Kit Replacement retaining pin kit for Pro-Fish windlasses.Compatible With:Pro-Fish windlass*Sold as an Individual

    $12.95 $8.99

  • Lewmar V700 Combo Gypsy - 1/4" [68001024]

    Lewmar Lewmar V700 Combo Gypsy - 1/4" [68001024]

    V700 Combo Gypsy - 1/4" Replacement combo gypsy for V700 windlass - 1/4" (6 mm)Compatible With:V700 WindlassTechnical Specifications: Rope Size - 1/2" (12.7 mm)  Chain Size - 1/4" (6.35 mm)  *Sold as an Individual  Owner's Manual (pdf)

    $156.95 $105.99

  • Lewmar Pro-Series Generation 3 Motor Kit - 12V [66000763]

    Lewmar Lewmar Pro-Series Generation 3 Motor Kit - 12V [66000763]

    Pro-Series Generation 3 Motor Kit - 12V Replacement 12 V motor for Pro-Fish and Pro-Series windlasses.Compatible With:Pro-Fish and Pro-Series (700/1000) windlasses.*Sold as an Individual

    $271.95 $178.99

  • Lewmar Pro-Series Generation 3 Gasket Kit [66000759]

    Lewmar Lewmar Pro-Series Generation 3 Gasket Kit [66000759]

    Pro-Series Generation 3 Gasket Kit Replacement gasket kit forPro-Series Genration 3 windleasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual 

    $45.95 $32.99

  • Lewmar Pro-Sport Motor - 150W - 12V [66200146]

    Lewmar Lewmar Pro-Sport Motor - 150W - 12V [66200146]

    Pro-Sport Motor - 150W - 12V Replacement motor for Pro-Sport series windlasses requiring 12 V and 150 watts.Compatible With:Pro-Sport windlasses*Sold as an Individual

    $223.95 $149.99

  • Lewmar V1 Fast Fit Motor Gearbox Assembly - 12V [66810065]

    Lewmar Lewmar V1 Fast Fit Motor Gearbox Assembly - 12V [66810065]

    V1 Fast Fit Motor Gearbox Assembly - 12 VReplacement motor/gearbox assembly for V1 - 12 V windlasses.Compatible With: V1 windlasses*Sold as an Individual 

    $1,330.95 $888.99

  • Lewmar Pro-Sport 550G Horizontal Windlass Kit - 12V [6656811967-303]

    Lewmar Lewmar Pro-Sport 550G Horizontal Windlass Kit - 12V [6656811967-303]

    Pro-Sport 550G Horizontal Windlass Kit - 12VLewmar’s Pro-Sport windlass is designed as an economical package for rope and chain applications, without compromise on quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful permanent magnet motors. Its rugged aluminum center case and durable composite side covers make Pro-Sport the perfect choice.  Complete with push-button control, anchoring has never been easier. Features: Low power consumption / current draw Dual direction powered operation Convenient above-deck installation Manual freefall DIY ready Technical Specifications: Chain Size - 1/4" G4 or BBB Rope Size - 1/2" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 150 Watt Maximum pulling power - 550lb (250kg) Maximum Working Load - 137lb (62.12kg) For boats up to 28' (9M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Contactor Rocker switch Instruction manual  *Sold as an Individual Owner's Manual (pdf)

    $1,404.95 $938.99

  • Lewmar Pro-Series Stripper Kit [66000096]

    Lewmar Lewmar Pro-Series Stripper Kit [66000096]

    Pro-Series Stripper Kit Replacement stripper and fasteners for Pro-Series windlasses.Compatible with: Pro-Series and Pro-Fish windlasses*Sold as an Indivudual

    $35.95 $24.99

  • Lewmar V4/V5 Windlass Gypsy #203 [68000358]

    Lewmar Lewmar V4/V5 Windlass Gypsy #203 [68000358]

    V4/V5 Windlass Gypsy #203 Replacement gypsy on Windlass Model V4/V5Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 5/8" (16 mm) (3 strand hard lay up) Chain Size - 3/8" (10 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

    $684.95 $450.99

  • Lewmar Pro Series Windlass Gypsy #516 [66000102]

    Lewmar Lewmar Pro Series Windlass Gypsy #516 [66000102]

    Pro Series Windlass Gypsy #516 Replacement gypsy on Windlass Model Pro-Fish/Series 1000Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

    $199.95 $133.99

  • Lewmar V4/C4 Motor Gearbox - 24V [68000535]

    Lewmar Lewmar V4/C4 Motor Gearbox - 24V [68000535]

    V4/C4 Motor Gearbox - 24VElectric and hydraulic motor gearboxes to suit Lewmar's windlass models V4/V5 and Lewmar's Capstan C4/C5.

    $2,986.95 $1,998.99

  • Lewmar Deck Foot Switch - Windlass Up - Stainless Steel [68000889]

    Lewmar Lewmar Deck Foot Switch - Windlass Up - Stainless Steel [68000889]

    Deck Foot Switch - Windlass Up - Stainless SteelLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

    $158.95 $106.99

  • Lewmar Dual Direction Solenoid - 12V [0052531]

    Lewmar Lewmar Dual Direction Solenoid - 12V [0052531]

    Dual Direction Solenoid - 12VA replacement dual-direction sealed solenoid/contactor that controls up/down direction.Compatible with: Horizon windlasses  Sprint 600 & 1000 windlasses Pro Series 700 & 1000 windlasses Pro Fish 700 & 1000 windlasses  Technical Specifications: Nominal Voltage - 12V Direction - Up/Down *Sold as an Individual

    $286.95 $188.99

  • Lewmar Pro-Fish 1000 Horizontal Windlass Kit - 12V [6656411108-102]

    Lewmar Lewmar Pro-Fish 1000 Horizontal Windlass Kit - 12V [6656411108-102]

    Pro-Fish 1000 Horizontal Windlass Kit - 12VLewmar's Pro-Fish model is the ultimate windlass for fishermen.  The Pro-Fish has an automatic freefall that allows you to pull right up over a wreck or ledge, and drop anchor with speed and precision.  No more running your motor or wasting fuel while you hover fish.  You can retrieve your anchor just as easily, with the push of a button. Plus, the Pro-Fish is DIY-ready and made of durable 316 stainless steel.The Pro-Fish is perfectly suited to installation in the stern of a boat, where it can be utilized for easy Scandinavian-style stern anchoring.  The automatic free-fall mechanism means access to the windlass is not required to drop or retrieve the anchor and the all-stainless design is extremely resistant to corrosion.This windlass has been specially designed to suit leaded lines up to 5/8" in diameter and a revised control arm and new Pro-Guard plate prevent the rope from jumping out of the windlass or snagging during operation.Features: Automatic freefall Powerful motor providing fast line speed Manual emergency recovery equipped all you need is a common 1/2 socket wrench Convenient above-deck installation Technical Specifications: Chain Size - 5/16" G4 or BBB Rope Size - 5/8" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 700 Watt Maximum pulling power - 1000lb (453kg) Maximum Working Load - 250lb (113.4kg) For boats up to 38' (11.58M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Dual-direction solenoid Rocker switch Instruction manual  *Sold as an Individual Specifications: Freefall: Yes Vertical/Horizontal: Horizontal Box Dimensions: 9"H x 12"W x 13"L WT: 20 lbs UPC: 743683326677 Owner's Manual (pdf)

    $2,375.95 $1,588.99

  • Lewmar V700 Vertical Windlass - 12V [6670011108]

    Lewmar Lewmar V700 Vertical Windlass - 12V [6670011108]

    V700 Vertical Windlass - 12V (Windlass only)With 100%  316 stainless steel housing and a sleek flush-mount design that hides the motor down below, the V700 is one of the most attractive and durable windlasses on the market.  It works at the push of a button and has two built-in features that make it unique - motor protection and anchor lock. The V700 comes with a gypsy able to accept 1/4 inch chains.*Does not include contactor or circuit breaker.  Windlass ONLY. Features: For rope, chain, or combination rodes  Built-in motor protection and fail-safe anchor lock Easy installation Fast line speed Manual recovery option Impact-resistant cover Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 35' Mounting Position - Vertical Weight - 14lbs In the Box: Windlass Instruction manual *Sold as an Individual  Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .5 Vertical/Horizontal: Vertical Box Dimensions: 6"H x 8"W x 15"L WT: 20 lbs UPC: 743683303036 Owner's Manual (pdf)

    $1,504.95 $1,005.99

  • Lewmar Pro-Fish 700 Horizontal Windlass - 12V [6656211967-310]

    Lewmar Lewmar Pro-Fish 700 Horizontal Windlass - 12V [6656211967-310]

    Pro-Fish 700 Windlass - 12VThe Lewmar Pro-Fish model is the ultimate windlass for fishermen.  The Pro-Fish has an automatic freefall that allows you to pull right up over a wreck or ledge, and drop anchor with speed and precision.  No more running your motor or wasting fuel while you hover fish.  You can retrieve your anchor just as easily, with the push of a button.  Plus, the Pro-Fish is DIY-ready and made of durable 316 stainless steel.This windlass has been specially designed to suit leaded lines up to 7mm in diameter and a revised control arm and new Pro-Guard plate prevent the rope from jumping out of the windlass or snagging during operation.Features Automatic freefall Powerful motor providing fast line speed Manual emergency recovery equipped all you need is a common 1/2 socket wrench Strong  316 stainless steel, including control arm and stripper Maximum pulling power: 320kg (700 lb) for the 700 and 454kg (1,000 lb) for the 1000 Convenient above-deck installation 5-year warranty For boats up to 12m (38ft) Technical Specifications: Chain Size - 1/4" G4 or BBB Rope Size - 1/2" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 500 Watt Maximum Pulling Power - 700lb (318kg) Maximum Working Load - 175lb  (79.38) For boats up to 32' (9.75M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Dual-direction solenoid Rocker switch Instruction manual  *Sold as an Individual Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .50 Vertical/Horizontal: Horizontal Box Dimensions: 8"H x 11"W x 12"L WT: 20 lbs UPC: 743683306860 Owner's Manual (pdf)

    $2,184.95 $1,461.99

  • Lewmar Solenoid in Watertight Control Box - 12V [68000129]

    Lewmar Lewmar Solenoid in Watertight Control Box - 12V [68000129]

    Solenoid in Watertight Control Box - 12VHeavy-duty dual-direction solenoid that controls the up/down operations of Lewmar Concept 1 and V-Series windlasses. Features: Controls Up / Down operation Ideal for windlass installations in chain locker or other damp locations Nominal voltage - 12V *Sold as an Individual

    $529.95 $347.99

  • Lewmar Windlass Control Solenoid - 12V [68000939]

    Lewmar Lewmar Windlass Control Solenoid - 12V [68000939]

    Windlass Control Solenoid - 12VDual-direction windlass control solenoid.Compatible with: Pro Sport Pro Series & Pro Fish 700 Pro Series & Pro Fish 1000 V700 Technical Specifications: Direction - Up and Down Nominal Voltage - 12 VDC Dimensions (H x W x D) - 2.5" x 2-3/8" x 2-1/8" *Sold as an Individual  

    $236.95 $154.99

  • Lewmar Replacement Windlass Motor Kit - 12V [66000610]

    Lewmar Lewmar Replacement Windlass Motor Kit - 12V [66000610]

    Replacement Windlass Motor Kit - 12VReplacement Windlass Motor.Compatible with:  Lewmar V700  Lewmar Sprint 600  Technical Specifications: Power Supply - 12V Current Draw - 40Amp In the Box: Motor Gasket Mounting hardware *Sold as an Individual

    $233.95 $152.99

  • Lewmar Anchor Safety Strap -11" [SS180003]

    Lewmar Lewmar Anchor Safety Strap -11" [SS180003]

    Anchor Safety Strap - 11"Safety straps will prevent the Anchor from deploying if the Anchor is unintentionally released or powers out accidentally. It is simply clipped on the chain, shackle, or Anchor.   They do not secure (hold tight) the Anchor in the bow roller.Lewmar recommends securing the anchor to the boat when not in use.  The windlass is not designed to hold the anchor to the boat when not in use.Technical Specifications: Material - Stainless Steel Length - 11" *Sold as an Individual

    $84.95 $55.99

  • Taylor Made 9" Tuff End Inflatable Vinyl Buoy - White [1140]

    Taylor Made Taylor Made 9" Tuff End Inflatable Vinyl Buoy - White [1140]

    9" Tuff End™ Inflatable Vinyl Buoy - WhiteTuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry.Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength, the strongest in the industry! Tuff Ends feature large line holes that will accept standard shackles. The curved design hole prevents chafing.Recommended inflation is 2 psi.* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.Features: 1 year warranty Valve located on the side of the buoy for easy inflation Dia: 9" Circumference: 28" Line Hole: 1-1/16" Approx. Buoyancy (lbs): 14 Specifications: Color: White Diameter (Inches): 9" Box Dimensions: 4"H x 11"W x 12"L WT: 1.9 lbs UPC: 040011310408

    $64.95 $34.99

  • Taylor Made 12" Tuff End Inflatable Vinyl Buoy - White [1143]

    Taylor Made Taylor Made 12" Tuff End Inflatable Vinyl Buoy - White [1143]

    12" Tuff End™ Inflatable Vinyl Buoy - WhiteTuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry.Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength, the strongest in the industry! Tuff Ends feature large line holes that will accept standard shackles. The curved design hole prevents chafing.Recommended inflation is 2 psi.* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.Features: 1 year warranty Valve located on the side of the buoy for easy inflation Dia: 12" Circumference: 38" Line Hole: 1-1/16" Approx. Buoyancy (lbs): 33 Specifications: Color: White Diameter (Inches): 12" Box Dimensions: 5"H x 13"W x 17"L WT: 3.05 lbs UPC: 040011311436

    $67.95 $41.99

  • Taylor Made 12" Tuff End Inflatable Vinyl Buoy - Orange [61143]

    Taylor Made Taylor Made 12" Tuff End Inflatable Vinyl Buoy - Orange [61143]

    12" Tuff End™ Inflatable Vinyl Buoy - OrangeTuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry.Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength, the strongest in the industry! Tuff Ends feature large line holes that will accept standard shackles. The curved design hole prevents chafing.Recommended inflation is 2 psi.* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.Features: 1 year warranty Valve located on the side of the buoy for easy inflation Dia: 12" Circumference: 38" Line Hole: 1-1/16" Approx. Buoyancy (lbs): 33 Specifications: Color: Orange Diameter (Inches): 12" Box Dimensions: 5"H x 13"W x 17"L WT: 3.1 lbs UPC: 040011316431

    $67.95 $41.99

  • Master Fender Covers HTM-4 - 12" x 34" - Single Layer - Navy [MFC-4NS]

    Master Fender Covers Master Fender Covers HTM-4 - 12" x 34" - Single Layer - Navy [MFC-4NS]

    HTM-4 - 12" x 34" - Single Layer - NavyMaster Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements. Specifications: Color: Navy Blue Box Dimensions: 3"H x 10"W x 11"L WT: 0.85 lbs UPC: 817382010417

    $39.99 $33.99

  • New England Ropes 5/8"Premium 3-Strand Dock Line - White w/Tracer - 25 [C6050-20-00025]

    New England Ropes New England Ropes 5/8"Premium 3-Strand Dock Line - White w/Tracer - 25 [C6050-20-00025]

    5/8" Premium 3-Strand Dock Line - White with Tracer - 25'The Premium 3-Strand Nylon from New England Ropes features outstanding strength and high abrasion resistance.Premium 3-Strand Nylon is a long-wearing, flexible and easy-to-handle rope that has greater strength and better abrasion resistance than all other 3-strand nylon lines.  The highest tenacity nylon treated with proprietary Marine Tech coating increases its wet strength and improves its fiber-to-fiber abrasion.Applications: Dock line - ≤55' (16.8 M) vessel Anchor lines - ≤ 40' (12.2 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color - White with tracer Material -  3-Strand high grade marine nylon  Rope Diameter - 5/8" (16mm) Rope Length - 25' (7.62 M) Tensile Strength - 11,650 lb *Sold as an Individual Specifications: Tracer: Yes Rope Type: 3-Strand Nylon Color: White Length (Feet): 25' Rope Diameter (Inches): 5/8" Box Dimensions: 5"H x 6"W x 8"L WT: 2.8 lbs UPC: 753963042975 Brochure (pdf)

    $73.22 $45.99

Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account